Evolution of Young's modulus, strength, and microstructure during liquid-phase sintering

Journal of the American Ceramic Society

Volumn 81, Issue 7, 1998, Pages 1852-1860

  Ostrowski, Thomas ^a   Ziegler, Alexander ^a,d   Bordia, Rajendra K ^b,c   Rödel, Jürgen ^a,c  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

^b University of Washington   (United States)

^c AMERICAN CERAMIC SOCIETY   (United States)

^d Lawrence Berkeley National Laboratory   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; DENSIFICATION; ELASTIC MODULI; FRACTOGRAPHY; FRACTURE TOUGHNESS; GLASS TRANSITION; MICROSTRUCTURE; POROSITY; POROUS MATERIALS; SHRINKAGE; SINTERING; STRENGTH OF MATERIALS;

LIQUID PHASE SINTERING;

ALUMINA;

EID: 0032116230     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1998.tb02557.x     Document Type: Article

References (45)

1. W. D. Kingery, Densification During Sintering in the Presence of a Liquid Phase, I: Theory," J. Appl. Phys., 30, 301-306 (1959).
2. J. E. Marion, C. H. Hsueh, and A. G. Evans, "Liquid-Phase Sintering of Ceramics," J. Am. Ceram. Soc., 70 [10] 708-13 (1987).
3. O.-H. Kwon and G. L. Messing, "Kinetic Analysis of Solution-Precipitation During Liquid-Phase Sintering of Alumina," J. Am. Ceram. Soc., 73 [2] 275-81 (1990).
4. O.-H. Kwon and G. L. Messing, "A Theoretical Analysis of Solution-Precipitation Controlled Densification During Liquid-Phase Sintering," Acta Met. Mater., 39 [9] 2059-68 (1991).
5. W. J. Huppmann, "Sintering in the Presence of Liquid Phase"; pp. 359-78 in Sintering ana Catalysts. Edited by G. C. Kuczynski. Plenum Press, New York, 1975.
6. S. Pejovnik, D. Kolar, W. J. Huppmann, and G. Petzow, "Sintering of Alumina in Presence of Liquid Phase," Mater. Sci. Monogr., 4, 285-92 (1977).
7. W. J. Huppmann, H. Riegger, W. A. Kaysser, V. Smolej, and S. Pejovnik, "The Elementary Mechanisms of Liquid Phase Sintering," Z. Metallkd., 70, 707-13 (1979).
8. J. W. Cahn and R. B. Heady, "Analysis of Capillary Forces in Liquid-Phase Sintering of Jagged Particles," J. Am. Ceram. Soc., 53 [7] 406-409 (1970).
9. H. E. Exner, "Principles of Single Phase Sintering"; in Reviews on Powder Metallurgy and Physical Ceramics, Vol. I, No. 1-4. Edited by F. V. Lenel. Freund Publishing House, London, U.K., 1979.
10. G. H. Gessinger, H. F. Fischmeister, and H. L. Lukas, "A Model for Second Stage Liquid Phase Sintering with a Partially Wetting Liquid," Acta Metall., 21, 715-24 (1973).
11. S.-J. L. Kang, K.-H. Kim, and D. N. Yoon, "Densification and Shrinkage During Liquid-Phase Sintering," J. Am. Ceram. Soc., 74 [2] 425-27 (1991).
12. T. M. Shaw, "Liquid Redistribution During Liquid-Phase Sintering," J. Am. Ceram. Soc., 69 [1] 27-34 (1986).
13. T. M. Shaw, "Model for the Effect of Powder Packing on the Driving Force for Liquid-Phase Sintering," J. Am. Ceram. Soc., 76 [3] 664-70 (1993).
14. H. H. Park, O. J. Kwon, and D. N. Yoon, "The Critical Grain Size for Liquid Flow into Pores During Liquid Phase Sintering," Metall. Trans., 17A, 1915-19 (1986).
15. W. J. Huppmann, S. Pejovnik, and S. M. Han, "Rearrangement During Liquid Phase Sintering in Ceramics"; pp. 233-42 in Materials Science Research, Vol. 11, Processing of Crystalline Ceramics. Edited by H. Palmour, R. F. Davis, and T. M. Hare. Plenum Press, New York, 1978.
16. P. L. Flaitz and J. A. Pask, "Penetration of Polycrystalline Alumina by Glass at High Temperatures," J. Am. Ceram. Soc., 70 [7] 449-55 (1987).
17. E. Kostic, S. Boskovic, and S. J. Kis, "Reaction Sintering of Alumina in the Presence of a Liquid Phase," Ceram. Int., 19, 235-40 (1993).
18. W. A. Kaysser, M. Sprissler, C. A. Handwerker, and J. E. Blendell, "Effect of Liquid Phase on the Morphology of Grain Growth in Alumina," J. Am. Ceram. Soc., 70 [5] 339-43 (1987).
19. H. Song and R. L. Coble, "Morphology of Platelike Abnormal Grains in Liquid-Phase-Sintered Alumina," J. Am. Ceram. Soc., 73 [7] 2086-90 (1990).
20. J. D. Hodge, "The Effect of Particle Size Distribution on Liquid Phase Sintering in Alumina," Ceram. Trans., 7, 415-35 (1989).
21. N. P. Padture and H. M. Chan, "Improved Flaw Tolerance in Alumina Containing 1 vol% Anorthite via Crystallization of the Intergranular Glass," J. Am. Ceram. Soc., 75 [7] 1870-75 (1992).
22. C. A. Powel-Dogan and A. H. Heuer, "Microstructure of 96% Alumina Ceramics: III, Crystallization of High-Calcia Boundary Glasses," J. Am. Ceram. Soc., 73 [12] 3684-91 (1990).
23. E. Ryshkewitch, "Compression Strength of Porous Sintered Alumina and Zirconia," J. Am. Ceram. Soc., 36 [2] 65-68 (1953).
24. W. Duckworth, "Discussion of Compression Strength of Porous Sintered Alumina and Zirconia," J. Am. Ceram. Soc., 36 [2] 68-69 (1953).
25. R. L. Coble and W. D. Kingery, "Effect of Porosity on Physical Properties of Sintered Alumina," J. Am. Ceram. Soc., 39 [11] 377-85 (1956).
26. D. C. C. Lam, F. F. Lange, and A. G. Evans, "Mechanical Properties of Partially Dense Alumina Produced from Powder Compacts," J. Am. Ceram. Soc., 77 [8] 2113-17 (1994).
27. D. J. Green, C. Nader, and R. Brezny, "The Elastic Behavior of Partially-Sintered Materials," Mater. Res. Soc. Symp. Proc., 119, 43-48 (1988).
28. D. J. Green, C. Nader, and R. Brezny, "The Elastic Behavior of Partially-Sintered Alumina"; pp. 345-56 in Sintering of Advanced Ceramics. Edited by C. A. Handwerker, J. E. Blendell, and W. A. Kaysser. American Ceramic Society, Westerville, OH, 1990.
29. K. K. Phani and S. K. Niyogi, "Young's Modulus of Porous Brittle Solids," J. Mater. Sci., 22, 257-63 (1987).
30. R. M. Spriggs, "Expression for Effect of Porosity on Elastic Modulus of Polycrystalline Refractory Materials, Particularly Aluminum Oxide," J. Am. Ceram. Soc., 44 [12] 628-29 (1961).
31. F. Knudsen, "Effect of Porosity on Young's Modulus of Alumina," J. Am. Ceram. Soc., 45 [2] 94-95 (1962).
32. M. Knechtel, C. Cloutier, R. Bordia, and J. Rödel, "Mechanical Properties of Partially Sintered Alumina," unpublished work.
33. T. Fett, D. Munz, J. Seidel, M. Stech, and J. Rödel, "Correlation between Long and Short Crack R-curves in Alumina Using the Crack Opening Displacement and Fracture Mechanical Weight Function Approach," J. Am. Ceram. Soc., 79 [5] 1189-96 (1996).
34. J. Seidel, N. Claussen, and J. Rödel, "Reliability of Alumina Ceramics: I, Effect of Grain Size," J. Eur. Ceram. Soc., 15, 395-404 (1995).
35. A. Zimmermann, M. Hoffman, B. D. Flinn, R. K. Bordia, T.-J. Chuang, E. R. Fuller, and J. Rödel, "Fracture of Alumina with Controlled Pores," in press.
36. J. Seidel and J. Rödel, "Measurement of Crack Tip Toughness in Alumina as a Function of Grain Size," J. Am. Ceram. Soc., 80 [2] 433-38 (1997).
37. J. C. Wurst and J. A. Nelson, "Linear Intercept Technique for Measuring Grain Size in Two-Phase Polycrystalline Ceramics," J. Am. Ceram. Soc., 55 [2] 109-12 (1972).
38. A. Ziegler, "Mechanical Properties of Porous, Liquid-Phase Sintered Alumina" (in Ger.); Diploma Thesis. Technische Hochschule Darmstadt, Darmstadt, Germany, 1996.
39. A. S. Wagh, J. P. Singh, and R. B. Poeppel, "Dependence of Ceramic Fracture Properties on Porosity," J. Mater. Sci., 28, 3589-93 (1993).
40. S. K. Dutta, A. K. Mukhopadhyay, and D. Chakraborty, "Assessment of Strength by Young's Modulus and Porosity: A Critical Evaluation," J. Am. Ceram. Soc., 71 [11] 942-47 (1988).
41. G. D. Quinn, J. J. Swab, and M. J. Slavin, "A Proposed Standard Practice for Fractographic Analysis of Monolithic Advanced Ceramics," MIL TR 90-57, U.S. Army Materials Technology Laboratory, Watertown, MA.
42. M. Seabaugh, D. Horn, I. Kerscht, S. H. Hong, and G. L. Messing, "Anisotropic Grain Growth in Alumina Ceramics"; pp. 341-48 in Sintering Technology. Edited by R. M. German and R. G. Cornwall. Marcel Dekker, New York, 1996.
43. S. J. Bennison and B. R. Lawn, "Role of Interfacial Grain-Bridging Sliding-Friction in the Crack Resistance and Strength Properties of Nontransforming Ceramics," Acta Metall., 37 [10] 2659-71 (1989).
44. R. W. Steinbrech and O. Schmenkel, "Crack-Resistance Curves of Surface Cracks in Alumina," J. Am. Ceram. Soc., 71 [5] C-271-C-273 (1988).
45. B. D. Flinn, R. K. Bordia, and J. Rödel, "Evolution of Strength Determining Flaws During Sintering"; pp. 13-20 in Sintering Technology. Edited by R. M. German and R. G. Cornwall. Marcel Dekker, New York, 1996.