Three-vectors-based predictive direct power control of the doubly fed induction generator for wind energy applications

IEEE Transactions on Power Electronics

Volumn 29, Issue 7, 2014, Pages 3485-3500

  Zhang, Yongchang ^a   Hu, Jiefeng ^b   Zhu, Jianguo ^b  

^a NORTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^b UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

Author keywords

Direct power control; doubly fed induction generator (DFIG); predictive control; wind energy

Indexed keywords

ACTIVE AND REACTIVE POWER; DIRECT POWER CONTROL; DOUBLY FED INDUCTION GENERATOR (DFIG); DOUBLY FED INDUCTION GENERATORS; PREDICTIVE CONTROL; PREDICTIVE DIRECT POWER CONTROLS; STEADY-STATE AND DYNAMIC PERFORMANCE; WIND ENERGY CONVERSION SYSTEM;

ELECTRIC FAULT CURRENTS; WIND POWER;

VECTORS;

EID: 84897699353     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2013.2282405     Document Type: Article

References (34)

1. Z. Chen, J. Guerrero, and F. Blaabjerg, "A review of the state of the art of power electronics for wind turbines," IEEE Trans. Power Electron., vol. 24, no. 8, pp. 1859-1875, Aug. 2009.
2. H. Li and Z. Chen, "Overviewof differentwind generator systems and their comparisons," IET Renewable Power Generat., vol. 2, no. 2, pp. 123-138, Jun. 2008. (Pubitemid 351347461)
3. R. Pena, J. C. Clare, and G. M. Asher, "Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation," IEE Proc. Electr. Power Appl., vol. 143, no. 3, pp. 231-241, 1996. (Pubitemid 126760209)
4. H.Akagi andH. Sato, "Control and performance of a doubly-fed induction machine intended for a flywheel energy storage system," IEEE Trans. Power Electron., vol. 17, no. 1, pp. 109-116, Jan. 2002. (Pubitemid 34307398)
5. L. Xu and P. Cartwright, "Direct active and reactive power control of DFIG for wind energy generation," IEEE Trans. Energy Convers., vol. 21, no. 3, pp. 750-758, Sep. 2006. (Pubitemid 46445164)
6. R. Datta and V. Ranganathan, "Direct power control of grid-connected wound rotor induction machine without rotor position sensors," IEEE Trans. Power Electron., vol. 16, no. 3, pp. 390-399, May 2001. (Pubitemid 32534596)
7. S. Arnalte, J. Burgos, and J. Rodriguez-Amenedo, "Direct torque control of a doubly-fed induction generator for variable speed wind turbines," Electr. Power Compon. Syst., vol. 30, no. 2, pp. 199-216, 2002. (Pubitemid 34566901)
8. G. S. Buja and M. P. Kazmierkowski, "Direct torque control of PWM inverter-fed AC motors-A survey," IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 744-757, Aug. 2004.
9. J. Beerten, J. Verveckken, and J. Driesen, "Predictive direct torque control for flux and torque ripple reduction," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 404-412, Jan. 2010.
10. Y. Zhang, J. Zhu, W. Xu, and Y. Guo, "A simple method to reduce torque ripple in direct torque-controlled permanent-magnet synchronous motor by using vectors with variable amplitude and angle," IEEE Trans. Ind. Electron., vol. 58, no. 7, pp. 2848-2859, Jul. 2011.
11. J.-K.Kang and S.-K. Sul, "Newdirect torque control of inductionmotor for minimum torque ripple and constant switching frequency," IEEE Trans. Ind. Appl., vol. 35, no. 5, pp. 1076-1082, Sep./Oct. 1999. (Pubitemid 32262082)
12. Y. Zhang, Z. Li, Y. Zhang, W. Xie, Z. Piao, and C. Hu, "Performance improvement of direct power control of PWMrectifier with simple calculation," IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3428-3437, Jul. 2013.
13. E. Flach, R. Hoffmann, and P. Mutschler, "Direct mean torque control of an induction motor," in Proc. Eur. Power Electron., 1997, vol. 3, pp. 672-677.
14. Y. Zhang, W. Xie, Z. Li, and Y. Zhang, "Model predictive direct power control of a PWM rectifier with duty cycle optimization," IEEE Trans. Power Electron., vol. 28, no. 11, pp. 5343-5351, Nov. 2013.
15. L. Romeral, A. Arias, E. Aldabas, and M. Jayne, "Novel direct torque control (DTC) scheme with fuzzy adaptive torque-ripple reduction," IEEE Trans. Ind. Electron., vol. 50, no. 3, pp. 487-492, Jun. 2003.
16. Y. Zhang and J. Zhu, "Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency," IEEE Trans. Power Electron., vol. 26, no. 1, pp. 235-248, Jan. 2011.
17. M. Pacas and J. Weber, "Predictive direct torque control for the PM synchronous machine," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1350-1356, Oct. 2005. (Pubitemid 41489378)
18. K.-K. Shyu, J.-K. Lin, V.-T. Pham, M.-J. Yang, and T.-W. Wang, "Global minimum torque ripple design for direct torque control of induction motor drives," IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 3148-3156, Sep. 2010.
19. Y. Zhang, Z. Li, T. Wang, W. Xu, and J. Zhu, "Evaluation of a class of improved DTC method applied in DFIG for wind energy applications," in Proc. Int. Electr. Mach. Syst. Conf., 2011, pp. 1-6.
20. S. A. Larrinaga,M. A. R. Vidal, E. Oyarbide, and J. R. T. Apraiz, "Predictive control strategy for dc/ac converters based on direct power control," IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1261-1271, Jun. 2007. (Pubitemid 46563384)
21. G. Abad,M. A. Rodriguez, and J. Poza, "Two-level VSC-based predictive direct power control of the doubly fed induction machine with reduced power ripple at low constant switching frequency," IEEE Trans. Energy Convers., vol. 23, no. 2, pp. 570-580, Jun. 2008. (Pubitemid 351728798)
22. J. Hu, J. Zhu, Y. Zhang, G. Platt, Q. Ma, and D. Dorrell, "Predictive direct virtual torque and power control of doubly-fed induction generators for fast and smooth grid synchronization and flexible power regulation," IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3182-3194, Jul. 2013.
23. G. Abad,M. A. Rodriguez, and J. Poza, "Two-level VSC based predictive direct torque control of the doubly fed induction machine with reduced torque and flux ripples at low constant switching frequency," IEEE Trans. Power Electron., vol. 23, no. 3, pp. 1050-1061, May 2008. (Pubitemid 351756682)
24. Y. Zhang and J. Zhu, "A novel duty cycle control strategy to reduce both torque and flux ripples for DTC of permanent magnet synchronous motor drives with switching frequency reduction," IEEE Trans. Power Electron., vol. 26, no. 10, pp. 3055-3067, Oct. 2011.
25. Y. Zhang, J. Zhu, and W. Xu, "Analysis of one step delay in direct torque control of permanent magnet synchronous motor and its remedies," in Proc. Int. Electr. Mach. Syst. Conf., 2010, pp. 792-797.
26. H. Miranda, P. Cortes, J. Yuz, and J. Rodriguez, "Predictive torque control of induction machines based on state-space models," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1916-1924, Jun. 2009.
27. Y. Zhang, Z. Li, Z. Piao, W. Xie, X. Wei, and W. Xu, "A novel threevectors-based predictive direct power control of doubly fed induction generator for wind energy applications," in Proc. IEEE Energy Convers. Congr. Expo., Sep. 2012, pp. 793-800.
28. D. Zhi, L. Xu, and B. W.Williams, "Model-based predictive direct power control of doubly fed induction generators," IEEE Trans. Power Electron., vol. 25, no. 2, pp. 341-351, Feb. 2010.
29. J. Hu, H. Nian, B. Hu, Y. He, and Z. Q. Zhu, "Direct active and reactive power regulation of DFIG using sliding-mode control approach," IEEE Trans. Energy Convers., vol. 25, no. 4, pp. 1028-1039, Dec. 2010.
30. V. Blasko and V. Kaura, "A new mathematical model and control of a three-phase ac-dc voltage source converter," IEEE Trans. Power Electron., vol. 12, no. 1, pp. 116-123, Jan. 1997. (Pubitemid 127770469)
31. G. Abad,M. A. Rodriguez, G. Iwanski, and J. Poza, "Direct power control of doubly-fed-induction-generator-based wind turbines under unbalanced grid voltage," IEEE Trans. Power Electron., vol. 25, no. 2, pp. 442-452, Feb. 2010.
32. D. Santos-Martin, J. L. Rodriguez-Amenedo, and S. Arnalte, "Direct power control applied to doubly fed induction generator under unbalanced grid voltage conditions," IEEE Trans. Power Electron., vol. 23, no. 5, pp. 2328-2336, Sep. 2008.
33. D. Zhi and L. Xu, "Direct power control of DFIG with constant switching frequency and improved transient performance," IEEE Trans. Energy Convers., vol. 22, no. 1, pp. 110-118, Mar. 2007. (Pubitemid 46487483)
34. Y. Zou, M. Elbuluk, and Y. Sozer, "A complete modeling and simulation of induction generator wind power systems," in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, 2010, pp. 1-8.