Application of polyaniline/clay combination to cellulosic paper as an approach to conductivity development

BioResources

Volumn 9, Issue 2, 2014, Pages 1886-1897

  Saravanan, Chandrasekaran ^a,b   He, Zhibin ^b   Ni, Yonghao ^b  

^a University of Bath Claverton Down   (United Kingdom)

^b UNIVERSITY OF NEW BRUNSWICK   (Canada)

Author keywords

Cellulosic fibers; Clay; Coating; Conductive paper; Conductivity; Polyaniline

Indexed keywords

ANILINE; CLAY; COATINGS; ELECTRIC CONDUCTIVITY; FIBERS; INFRARED SPECTROSCOPY; PAPER PRODUCTS; POLYMERIZATION; SCANNING ELECTRON MICROSCOPY;

CELLULOSIC FIBERS; CELLULOSIC PAPER; CONDUCTIVE PAPERS; ELECTRICAL CONDUCTIVITY; FIBER SURFACE; IN-SITU POLYMERIZATION; PAPER SURFACE; SHEET FORMATION;

POLYANILINE;

ANILINE; CELLULOSE FIBERS; CLAY; COATING; CONDUCTIVE PAPERS; CONDUCTIVITY; PAPER PRODUCTS; POLYMERIZATION; SCANNING ELECTRON MICROSCOPY;

EID: 84896901161     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.9.2.1886-1897     Document Type: Review

References (44)

1. Agarwal, M., Lvov, Y., and Varahramyan, K. (2006). "Conductive wood microfibers for smart paper through layer-by-layer nanocoating," Nanotechnology 17(21), 5319-5325.
2. Babazadeh, M. (2007). "A direct one-pot method for synthesis of polyaniline doped with dodecyl benzene sulphonic acid in aqueous medium and study of tis thermal properties," Iran. Polym. J. 16(6), 389-396.
3. Cao, Y., Andreatta, A., Heeger, A. J., and Smith, P. (1989). "Influence of chemical polymerization conditions on the properties of polyaniline," Polymer 30(12), 2305-2311.
4. Ding, C., Qian, X., Shen, J., and An, X. (2010a). "Preparation and characterization of conductive paper via in situ polymerization of pyrrole," BioResources 5(1), 303-315.
5. Ding, C., Qian, X., Yu, G., and An, X. (2010b). "Dopant effect and characterization of polypyrrole-cellulose composites prepared by in situ polymerization process," Cellulose 17 (6), 1067-1077.
6. Du, Y., Wu, T., Yan, N., Kortschot, M. T., and Farnood, R. (2013). "Pulp fiber-reinforced thermoset polymer composites: Effects of the pulp fibers and polymer," Composites: Part B 48, 10-17.
7. Duek, E. A. R., De Paoli, M. A., and Mastragostino, M. (1992). "An electrochromic device based on polyaniline and Prussian blue," Adv. Mater. 4(4), 287-291.
8. Dutta, D., Sarma, T. K., Chowdhury, D., and Chattopadhyay, A. (2005). "A polyaniline-containing filter paper that acts as a sensor, acid, base, and endpoint indicator and also filters acids and bases," J. Colloid Interf. Sci. 283(1), 153-159.
9. Focke, W. W., Wnek, G.E., and Wei, Y. (1987). "Influence of oxidation state, pH and counterion on the conductivity of polyaniline," J. Phys. Chem. A 91(22), 5813-5818.
10. Ghadimi, F., Safa, K. D., Massoumi, B., and Entezami, A. A. (2002). "Polyaniline doped with sulphosalicylic, salicylic and citric acid in solution and solid-state," Iran. Polym. J. 11(3), 159-166.
11. Gustafsson, G., Cao, Y., Treacy, G. M., Klavetter, F., Colaneri, N., and Heeger, A. J. (1992). "Flexible light-emitting diodes made from soluble conducting polymers," Nature 357(6378), 477-479.
12. Huang, B., Kang, G., and Ni, Y. (2005). "Electrically conductive fiber composites prepared from polypyrrole-engineered pulp fibers," Can. J. Chem. Eng. 83(5), 896-903.
13. Huang, B., Kang, G. J., and Ni, Y. (2006). "Preparation of conductive paper by in situ polymerization of pyrrole in a pulp fibre system," Pulp Paper Canada 107(2), 38-42.
14. Huang, W. S., Humphrey, B. D., and MacDiarmid, A. G. (1986). "Polyaniline, a novel conducting polymer (Morphology and chemistry of its oxidation and reduction in aqueous electrolytes)," J. Chem. Soc., Faraday Trans., 82, 2385-2400.
15. Johnston, J. H., Moraes, J., and Borrmann, T. (2005). "Conducting polymers on paper fibres," Synthetic Met. 153(1-3), 65-68.
16. Kanatzidis, M. G., Wu, C. G., Marcy, H. O., and Kannewurf, C. R. (1989). "Conductive-polymer bronzes. Intercalated polyaniline in vanadium oxide xerogels," J. Am. Chem. Soc. 111(11), 4139-4141.
17. Kaneko, M., and Nakamura, H. (1985). "Photoresponse of a liquid junction polyaniline film," J. Chem. Soc., Chem. Commun. (6), 346-347.
18. Kang, E. T., Neoh, K. G., and Tan, K. L. (1998). "Polyaniline: A polymer with many interesting intrinsic redox states," Prog. Polym. Sci. 23(2), 277-324.
19. Kang, G, and Ni, Y. (2008). "Further optimization of polypyrrole-pulp composite for the production of conductive paper," In: Proceedings of 2nd International Papermaking and Environment Conference, Tianjin, China.
20. Katz, H. E., Searson, P. C., and Poehler, T. O. (2010). "Batteries and charge storage devices based on electronically conducting polymers," J. Mater. Res. 25(8), 1561-1574.
21. Kelly, F. M., Johnston, J. H., Borrmann, T., and Richardson, M. J. (2007). "Functionalised hybrid materials of conducting polymers with individual fibres of cellulose," Eur. J. Inorg. Chem. (35), 5571-5577.
22. Kingsborough, R. P., and Swager, T. M. (1998). "Electroactivity enhancement by redox matching in cobalt salen-based conducting polymers," Adv. Mater. 10(14), 1100.
23. Kline, L. M., Hayes, D. G., Womac, A. R., and Labbe, N. (2010). "Simplified determination of lignin content in hard and soft woods via UV-spectrophotometric analysis of biomass dissolved in ionic liquids," BioResources 5(3), 1366-1383.
24. Kong, F., and Ni, Y. (2009a). "Determination of Cr(VI) concentration in diluted samples based on the paper test strip method," Water Sci. Technol. 60(12), 3083-3089.
25. Kong, F., and Ni, Y. (2009b). "Development of cellulosic paper-based test strips for Cr(VI) determination," BioResources 4(3), 1088-1097.
26. Li, J., Qian, X., Wang, L., and An, X. (2010a). "XPS characterization and percolation behavior of polyaniline-coated conductive paper," BioResources 5(2), 712-726.
27. Li, J., Qian, X., Chen, J., Ding, C., and An, X. (2010b). "Conductivity decay of cellulose-polypyrrole conductive paper composite prepared by in situ polymerization method," Carbohydr. Polym. 82(2), 504-509.
28. MacDiarmid, A. G. (2001). "Synthetic metals: A novel role for organic polymers," Synthetic Met. 125(1), 11-22.
29. Ngamna, O., Morrin, A., Killard, A. J., Moulton, S. E., Smyth, M. R., and Wallace, G. G. (2007). "Inkjet printable polyaniline nanoformulations," Langmuir 23(16), 8569-8574.
30. Nishino, H., Yu, G., Heeger, A. J., Chen, T. A., and Rieke, R. D. (1995). "Electroluminescence from blend films of poly(3-hexylthiophene) and poly(N-vinylcarbazole)," Synthetic Met. 68(3), 243-247.
31. Nystrom, G., Razaq, A., Strømme, M., Nyholm, L., and Mihranyan, A. (2009). "Ultrafast all-polymer paper-based batteries," Nano Lett. 9(10), 3635-3639.
32. Okamoto, M., Morita, S., Kim, Y. H., Kotaka, T., and Tateyama, H. (2001). "Dispersed structure change of smectic clay/poly (methyl methacrylate) nanocomposites by copolymerization with polar comonomers," Polymer 42(3), 1201-1206.
33. Paakko, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindstrom, T., Berglund, L. A., and Ikkala, O. (2008). "Long and entangled native cellulose I nanofibers allow flexible aerogels and hierarchically porous templates for functionalities," Soft Matter 4(12), 2492-2499.
34. Palaniappan, S., Saravanan, C., Amarnath, C. A., and Rao, V. J. (2004). "Polyaniline salts and complexes as catalyst in bisindole synthesis," Catal. Lett. 97(1-2), 77-81.
35. Palaniappan, S., Saravanan, C., and Rao, V. J. (2005). "Synthesis of polyaniline-bismoclite composite and its function as recoverable and reusable catalyst," J. Mol. Catal. A-Chem. 229(1-2), 221-226.
36. Qian, X., Shen, J., Yu, G., and An, X. (2010). "Influence of pulp fiber substrate on conductivity of polyaniline-coated conductive paper prepared by in situ polymerization," BioResources 5(2), 899-907.
37. Richardson, M. J., Johnston, J. H., and Borrmann, T. (2006). "Electronic properties of intrinsically conducting polymer-cellulose based composites," Curr. Appl. Phys. 6(3), 462-465.
38. Saikia, N. J., Bharali, D. J., Sengupta, P., Bordoloi, D., Goswamee, R. L., Saikia, P. C., Borthakur, P. C. (2003). "Characterization, beneficiation and utilization of a kaolinite clay from Assam, India," Appl. Clay Sci. 24(1-2), 93-103.
39. Sasso, C., Bruyant, N., Beneventi, D., Faure-Vincent, J., Zeno, E., Petit-Conil, M., Chaussy, D., and Belgacem, M. N. (2011). "Polypyrrole (PPy) chemical synthesis with xylan in aqueous medium and production of highly conducting, PPy/nanofibrillated cellulose films and coatings," Cellulose 18(6), 1455-1467.
40. Taka, T. (1991). "EMI shielding measurements on poly(3-octyl thiophene) blends," Synthetic Met. 41(3), 1177-1180.
41. 2, NH4Cl/polyaniline/carbon battery," J. Electrochem. Soc. 138(11), 3186-3189.
42. Trivedi, D. C., and Dhawan, S. K. (1992). "Grafting of electronically conducting polyaniline on insulating surfaces," J. Mater. Chem. 2(10), 1091-1096.
43. Yuan, L., Wan, J., Ma, Y., Wang, Y., Huang, M., and Chen, Y. (2013). "The content of different hydrogen bond models and crystal structure of eucalyptus fibers during beating," BioResources 8(1), 717-734.
44. Zhao, H., Li, L., Yang, J., Zhang, Y., and Li, H. (2008). "Synthesis and characterization of bimetallic Pt-Fe/polypyrrole carbon catalyst as DMFC anode catalyst," Electrochem. Comm. 10(6), 876-879.