Polypyrrole (PPy) chemical synthesis with xylan in aqueous medium and production of highly conducting PPy/nanofibrillated cellulose films and coatings

Cellulose

Volumn 18, Issue 6, 2011, Pages 1455-1467

  Sasso, Claudia ^a,b   Bruyant, Nicolas ^c   Beneventi, Davide ^a   Faure Vincent, Jerôme ^c   Zeno, Elisa ^b   Petit Conil, Michel ^b   Chaussy, Didier ^a   Belgacem, Mohamed Naceur ^a  

^a Laboratory of Pulp and Paper Industry LGP2 UMR CNRS 5518   (France)

^b CENTRE TECHNIQUE DU PAPIER   (France)

^c Departement de Recherches Fondamentales sur la Matiere Condensee CEA Grenoble   (France)

Author keywords

Composite film; Conductivity; Nanofibrillated cellulose; Polypyrrole; Xylan

Indexed keywords

ADDITIVE CONCENTRATIONS; AMMONIUM PEROXYDISULFATE; AQUEOUS MEDIUM; CHEMICAL SYNTHESIS; COATING CONDUCTIVITY; CONDUCTIVITY MECHANISMS; COPY PAPER; DEPLETION KINETICS; FILMS AND COATINGS; FREESTANDING FILMS; HANDLING PERFORMANCE; MORPHOLOGICAL ANALYSIS; NANOFIBRILLATED CELLULOSE; OXIDO-REDUCTION; PELLET CONDUCTIVITIES; POTENTIAL MEASUREMENTS; WEIGHT FRACTIONS; XYLAN;

ABSORPTION; AMMONIUM COMPOUNDS; CELLULOSE; CELLULOSE FILMS; COATINGS; COMPOSITE COATINGS; COMPOSITE FILMS; CONDUCTIVE FILMS; POLYMERIZATION; POLYMERS; SOLVENTS; SYNTHESIS (CHEMICAL);

POLYPYRROLES;

ADDITIVES; AMMONIUM COMPOUNDS; ANATOMY; CELLULOSE; COATINGS; PELLETING; POLYMERIZATION; PYRROLES; SOLVENTS; SYNTHESIS; THIN FILMS; XYLANS;

EID: 80855147554     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-011-9583-2     Document Type: Article

References (48)

1. Ali M, Sreekrishnan TR (2001) Aquatic toxicity from pulp and paper mill effluents: a review. Adv Environ Res 5(2): 175-196.
2. Amaike M, Yamamoto H (2006) Preparation of polypyrrole by emulsion polymerization using hydroxypropyl cellulose. Polym J 38(7): 703-709.
3. Amash A, Zugenmaier P (1998) Study on cellulose and xylan filled polypropylene composites. Polym Bull 40(2-3): 251-258.
4. Aulin C, Gällstedt M, Lindström T (2010) Oxygen and oil barrier properties of microfibrillated cellulose films and coatings. Cellulose 17(3): 559-574.
5. Chen X, Issi J, Devaux J, Billaud D (1995) The conducting behavior and stability of conducting polymer composites. Polym Eng Sci 35(8): 642-647.
6. Demir I, Serhat Baspinar M, Orhan M (2005) Utilization of kraft pulp production residues in clay brick production. Build Environ 40(11): 1533-1537.
7. Denneulin A, Blayo A, Bras J, Neuman C (2008) PEDOT: PSS coating on specialty papers: process optimization and effects of surface properties on electrical performances. Progress Org Coat 63(1): 87-91.
8. Ebringerová A, Sroková I, Talába P, Kačuráková M, Hromádková Z (1998) Amphiphilic beechwood glucuronoxylan derivatives. J Appl Polym Sci 67(9): 1523-1530.
9. Eder F, Klauk H, Halik M, Zschieschang U, Schmid G, Dehm C (2004) Organic electronics on paper. Appl Phys Lett 84(14): 2673-2675.
10. Fournier J, Boiteux G, Seytre G, Marichy G (1997) Percolation network of polypyrrole in conducting polymer composites. Synth Met 84(1-3): 839-840.
11. Fuhrmann A, Krogerus B (2009) Xylan from bleached hardwood pulp-new opportunities. TAPPI engineering, pulping, environmental conference, Memphis, TN, United States, 11-14 Oct.
12. Gabrielii I, Gatenholm P (1998) Preparation and properties of hydrogels based on hemicellulose. J Appl Polym Sci 69(8): 1661-1667.
13. Glasser W, Kaar WE, Jain RK, Sealey JE (2000) Isolation options for non-cellulosic heteropolysaccharides (HetPS). Cellulose 7(3): 299-317.
14. Jain RK, Sjöstedt M, Glasser WG (2000) Thermoplastic xylan derivatives with propylene oxide. Cellulose 7(4): 319-336.
15. 3, a sulfonic surfactant and a phenol derivative. Synth Met 95(3): 191-196.
16. Kuwabata S, Nakamura J, Yoneyama H (1990) Dependence of conductivity of polypyrrole film doped with p-phenol sulfonate on solution pH. J Electrochem Soc 137(7): 1788-1792.
17. Lei J, Cai Z, Martin CR (1992) Effect of reagent concentrations used to synthesize polypyrrole on the chemical characteristics and optical and electronic properties of the resulting polymer. Synth Met 46(1): 53-69.
18. Lowys M-P, Desbrières J, Rinaudo M (2001) Rheological characterization of cellulosic microfibril suspensions. Role of polymeric additives. Food Hydrocoll 15(1): 25-32.
19. Mahmud H, Kassim A, Zainal Z, Mat Yunus WM (2005) Electrochemical formation of polypyrrole-carboxymethylcellulose conducting polymer composite films. J Mater Sci Technol 21(5): 661-665.
20. Mahro B, Timm M (2007) Potential of biowaste from the food industry as a biomass resource. Eng Life Sci 7(5): 457-468.
21. Mott NF, Davis EA (1971) Electronic processes in non-crystalline materials. Clarendon Press, Oxford.
22. Moure A, Gullón P, Domínguez H, Parajó JC (2006) Advances in the manufacture, purification and applications of xylo-oligosaccharides as food additives and nutraceuticals. Process Biochem 41(9): 1913-1923.
23. Nalwa HS (1997) Handbook of organic conductive molecules and polymers (chapter 2), vol 4. Wiley, New York.
24. Nogi M, Yano H (2008) Transparent nanocomposites based on cellulose produced by bacteria offer potential innovation in the electronics device industry. Adv Mat 20(10): 1849-1852.
25. Novák P (1992) Limitations of polypyrrole synthesis in water and their causes. Electrochim Acta 37(7): 1227-1230.
26. Nyström G, Mihranyan A, Razaq A, Lindström T, Nyholm L, Strømme M (2010) A nanocellulose polypyrrole composite based on microfibrillated cellulose from wood. J Phys Chem B 114(12): 4178-4182.
27. Okahisa Y, Yoshida A, Miyaguchi S, Yano H (2009) Optically transparent wood-cellulose nanocomposite as a base substrate for flexible organic light-emitting diode displays. Compos Sci Tech 69(11-12): 1958-1961.
28. Omastová M, Trchová M, Kovárová J, Stejskal J (2003) Synthesis and structural study of polypyrroles prepared in the presence of surfactants. Synth Met 138(3): 447-455.
29. Omastová M, Trchová M, Pionteck J, Prokes J, Stejskal J (2004) Effect of polymerization conditions on the properties of polypyrrole prepared in the presence of sodium bis (2-ethylhexyl) sulfosuccinate. Synth Met 143(2): 153-161.
30. Pääkkö M, Ankerfors M, Kosonen H, Nykänen A, Ahola S, Österberg M, Ruokolainen J, Laine J, Larsson PT, Ikkala O, Lindström T (2007) Enzymatic hydrolysis combined with mechanical shearing and high pressure homogeneization for nanoscale cellulose fibrils and strong gels. Biomacromol 8(6): 1934-1941.
31. Polprasert C (2007) Organic waste recycling: technology and management. IWA Publishing, London.
32. Puls J, Schröder N, Stein A, Janzon R, Saake B (2005) Xylans from oat spelts and birch kraft pulp. Macromol Symp 232(1): 85-92.
33. Rußler A, Sakakibara K, Rosenau T (2011) Cellulose as matrix component of conducting films. Cellulose 18(4): 937-944.
34. Sasso C, Fenoll M, Stephan O, Beneventi D (2008) Use of wood derivatives as doping/dispersing agents in the preparation of polypyrrole aqueous dispersions. Bioresources 3(4): 1187-1195.
35. Sasso C, Beneventi D, Zeno E, Chaussy D, Petit-Conil M, Belgacem MN, Tapin-Lingua S (2010) Highly conducting polypyrrole/cellulose nanocomposite films with enhanced mechanical properties. Macromol Mat Eng 295(10): 934-941.
36. Sasso C, Beneventi D, Zeno E, Chaussy D, Petit-Conil M, Belgacem MN (2011) Carboxymethylcellulose: a conductivity enhancer and film-forming agent for processable polypyrrole from aqueous medium. Synth Met 161(5-6): 397-403.
37. Saxena A, Elder TJ, Pan S, Ragauskas AJ (2009) Novel nanocellulosic xylan composite film. Compos B Eng 40(8): 727-730.
38. Schwikal K, Heinze T, Ebringerová A, Petzold K (2005) Cationic xylan derivatives with high degree of functionalization. Macromol Symp 232(1): 49-56.
39. Shah J, Brown RM (2005) Towards electronic paper displays made from microbial cellulose. Appl Microbiol Biotech 66(4): 352-355.
40. Shklovskii BI, Efros AL (1984) Electronic properties of doped semiconductors. Springer Series in Solid-State Sciences, Heidelberg.
41. Sixta H (2011) Progress and challenges in the selective isolation of xylan from hardwood. 241st ACS National Meeting & Exposition, Anaheim, CA, United States, 27-31 March.
42. Thiéblemont J, Gabelle J, Planche M (1994) Polypyrrole overoxidation during its chemical synthesis. Synth Met 66(3): 243-247.
43. Timell TE (1967) Recent progress in the chemistry of wood hemicelluloses. Wood Sci Tech 1(1): 45-70.
44. Wallberg O, Linde M, Jönsson A (2006) Extraction of lignin and hemicelluloses from kraft black liquor. Desalination 199(1-3): 413-414.
45. Winther-Jensen B, Clark N, Subramanian P, Helmer R, Ashraf S, Wallace G, Spiccia L, MacFarlane DJ (2007) Application of polypyrrole to flexible substrates. J Appl Polym Sci 104(6): 3938-3947.
46. Yang C, Liu P (2009) Water-dispersed conductive polypyrroles doped with lignosulfonate and the weak temperature dependence of electrical conductivity. Ind Eng Chem Res 48(21): 9498-9503.
47. Yang R, Xu S, Wang Z, Yang W (2005) Aqueous extraction of corncob xylan and production of xylooligosaccharides. Food Sci Tech 38(6): 677-682.
48. Yeetsorn R, Fowler M, Tzoganakis C, Yuhua W, Taylor M (2008) Polypropylene composites for polymer electrolyte membrane fuel cell bipolar plates. Macromol Symp 264(1): 34-43.