Achieving interconnected pore architecture in injectable PolyHIPEs for bone tissue engineering

Tissue Engineering - Part A

Volumn 20, Issue 5-6, 2014, Pages 1103-1112

  Robinson, Jennifer L ^a   Moglia, Robert S ^a   Stuebben, Melissa C ^a   Mcenery, Madison A P ^a   Cosgriff Hernandez, Elizabeth ^a  

^a Texas A M University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CURING; DEFECTS; EMULSIFICATION; POROSITY; PROPYLENE; SCAFFOLDS; SCAFFOLDS (BIOLOGY); WATER INJECTION;

BONE TISSUE ENGINEERING; COMPRESSIVE MODULI; HIGH INTERNAL PHASE EMULSIONS; INJECTABLE SCAFFOLDS; INTERCONNECTED PORES; INTERCONNECTED POROSITY; RADICAL INITIATORS; TEMPLATE POLYMERIZATION;

BONE;

POLYMER; PROPYLENE FUMARATE DIMETHACRYLATE; UNCLASSIFIED DRUG;

ARTICLE; BIODEGRADABILITY; BONE DEFECT; BONE GROWTH; BONE TISSUE; COMPRESSIVE STRENGTH; CONTROLLED STUDY; DENSITY; EMULSION; FORCE; HIGH INTERNAL PHASE EMULSION; HUMAN; HUMAN CELL; INJECTION; MORPHOLOGY; POLYMERIZATION; POROSITY; PRIORITY JOURNAL; STORAGE TEMPERATURE; TISSUE ENGINEERING; TISSUE REGENERATION; TRABECULAR BONE; VISCOSITY;

ANIMALS; BONE AND BONES; CELL SURVIVAL; COMPRESSIVE STRENGTH; ELASTIC MODULUS; FUMARATES; HUMANS; INJECTIONS; MESENCHYMAL STROMAL CELLS; MICROSCOPY, ELECTRON, SCANNING; POLYMERS; POLYPROPYLENES; POROSITY; STYRENES; SUS SCROFA; TIME FACTORS; TISSUE ENGINEERING; VISCOSITY;

EID: 84896877955     PISSN: 19373341     EISSN: 1937335X     Source Type: Journal    
DOI: 10.1089/ten.tea.2013.0319     Document Type: Article

References (50)

1. Akay, G., Downes, S., and Price, V.J. Microcellular polymers as cell growth media and novel polymers. European Patent EP1183328, 2000
2. Lissant, K.J. The geometry of high internal phase ratio emulsions. J Colloid Interface Sci 22, 462, 1966
3. Barby, D., and Haq, Z. Low density porous cross-linked polymeric materials and their preparation. European Patent 0,060,138 (to Unilever). 1982
4. Ruckenstein, E., and Hong, L. Binding catalytic sites to the surface of porous polymers and some catalytic applications. Chem Mater 4, 122, 1992
5. Schoo, H.F.M., Challa, G., Rowatt, B., and Sherrington, D.C. Immobilization of flavin on highly porous polymeric disks: Three routes to a catalytically active membrane. React Func Polym 16, 125, 1992
6. Ottens, M., Leene, G., Beenackers, A.A.C.M., Cameron, N., and Sherrington, D.C. PolyHipe: A new polymeric support for heterogeneous catalytic reactions: Kinetics of hydration of cyclohexene in two- And three-phase systems over a strongly acidic sulfonated PolyHipe. Ind Eng Chem Res 39, 259, 2000
7. Small, P.W., and Sherrington, D.C. Design and application of a new rigid support for high efficiency continuous-flow peptide-synthesis. J Chem Soc Chem Commun 1989. DOI: 10.1039/C39890001589
8. Brown, I.J., Sotiropoulos, S. Electrodeposition of Ni from a high internal phase emulsion (HIPE) template. Electrochim Acta 46, 2711, 2001
9. Umez-Eronini, N.O., Collins, A., and Neal, D.E Optimisation of bladder stromal culture on polyHIPE Eur Cell Mater 4, 77, 2002
10. Busby, W., Cameron, N.R., and Jahoda, C.A.B. Emulsionderived foams (polyHIPEs) containing poly(e-caprolactone) as matrixes for tissue engineering. Biomacromolecules 2, 154, 2001
11. Cameron, N.R., Sherrington, D.C., Albiston, L., and Gregory, D.P. Study of the formation of the open-cellular morphology of poly(styrene/divinylbenzene) polyHiPE materials by cryo-SEM. Colloid Polym Sci 274, 592, 1996
12. Akay, G., Birch, M.A., and Bokhari, M.A. Microcellular polyHIPE polymer supports osteoblast growth and bone formation in vitro. Biomaterials 25, 3991, 2004
13. Hayman, M.W., Smith, K.H., Cameron, N.R., and Przyborski, S.A. Enhanced neurite outgrowth by human neurons grown on solid three-dimensional scaffolds. Biochem Biophys Res Commun 314, 483, 2004
14. Barbetta, A., Dentini, M., De Vecchis, M.S., Filippini, P., Formisano, G., and Caiazza, S. Scaffolds based on biopolymeric foams. Adv Funct Mater 15, 118, 2005
15. Barbetta, A., Dentini, M., Zannoni, E.M., and De Stefano, M.E. Tailoring the porosity and morphology of gelatinmethacrylate PolyHIPE scaffolds for tissue engineering applications. Langmuir 21, 12333, 2005
16. Cameron, N.R., Barbetta, A., and Cooper, S.J. High internal phase emulsions (HIPEs) containing divinylbenzene and 4-vinylbenzyl chloride and the morphology of the resulting PolyHIPE materials. Chem Commun 221, 2000, 2000
17. Bokhari, M.A., Birch, M.A., and Akay, G. Polyhipe polymer: A novel scaffold for in vitro bone tissue engineering. Exper Med Bio Tissue Eng Stem Cells Gene Therap 534, 247, 2003
18. Williams J.M., and Wrobleski, D.A. Spatial distribution of the phases in water-in-oil emulsions. Open and closed microcellular foams from cross-linked polystryene. Langmuir 4, 656, 1988
19. Cameron, N.R., and Sherrington, D.C. Synthesis and characterisation of poly(aryl ether sulfone) polyHIPE materials. Macromolecules 30, 1997
20. Lumelsky, Y., and Silverstein, M. Biodegradable porous polymers through emulsion templating. Macromolecules 42, 1627, 2009
21. Youssef, C., Backov, R., Treguer, M., Birot, M., and Deleuze, H. Preparation of amazingly hard polyHIPE material from a direct emulsion. Mater Res Soc Symp Proc 1269, 1, 2010
22. Lepine, O. Preparation of macrocellular PU-PS interpenetrating networks. Polymer 46, 9653, 2005
23. Bokhari, M., Carnachan, R.J., Przyborskiac, S.A., and Cameron, N.R. Emulsion-Templated porous polymers as scaffolds for three dimensional cell culture: Effect of synthesis parameters on scaffold formation and homogeneity. J Mater Chem 17, 4088, 2007
24. Kovačič, S.,Štefanec, D., and Krajnc, P. Highly porous opencellular monoliths from 2-hydroxyethyl methacrylate based high internal phase emulsions (HIPEs): Preparation and void size tuning. Macromolecules 40, 8056, 2007
25. Jabbari, E., Wang, S., Lu, L., Gruetzmacher, J.A., Ameenuddin, S., Hefferan, T.E., Currier, B.L., Windebank, A.J., and Yaszemski, M.J. Synthesis, material properties, and biocompatibility of a novel self-cross-linkable poly(caprolactone fumarate) as an injectable tissue engineering scaffold. Biomacromolecules 6, 2503, 2005
26. Hayman, M.W., Smith, K.H., Cameron, N.R., and Przyborskia, S.A. Growth of human stem cell-derived neurons on solid three-dimensional polymers. J Biochem Biophys Methods 62, 231, 2005
27. Busby, W., Cameron, N.R., and Jahoda, C.A.B. Tissue engineering matrixes by emulsion templating. Polym Int 51, 871, 2002
28. David, D., and Silverstein, M. Porous polyurethanes synthesized within high internal phase emulsions (HIPEs). J of Polym Sci A Polym Chem 47, 5806, 2009
29. Christenson, E.M., Soofi, W., Holm, J.L., Cameron, N.R., and Mikos, A.G. Biodegradable fumarate-based polyHIPEs as tissue engineering scaffolds. Biomacromolecules 8, 3806, 2007
30. Moglia, R.S., Holm, J.L., Sears, N.A., Wilson, C.J., Harrison, D.M., and Cosgriff-Hernandez, E. Injectable Poly-HIPEs as High-Porosity Bone Grafts. Biomacromolecules 12, 3621, 2011
31. Madden, L.R., Mortisen, D.J., Sussman, E.M., Dupras, S.K., Fugate, J.A., Cuy, J.L., Hauch, K.D., Laflamme, M.A., Murry, C.E., and Ratner, B.D. Proangiogenic scaffolds as functional templates for cardiac tissue engineering. Proc Natl Acad Sci U S A 107, 15211, 2010
32. Marcacci, M., Kon, E., Moukhachev, V., Lavroukov, A., Kutepov, S., Quarto, R., Mastrogiacomo, M., and Cancedda, R. Stem cells associated with macroporous bioceramics for long bone repair: 6-To 7-year outcome of a pilot clinical study. Tissue Eng 13, 947, 2007
33. Livshin, S., and Silverstein, M.S. Crystallinity and crosslinking in porous polymers synthesized from long side chain monomers through emulsion templating. Macromolecules 41, 3930, 2008
34. Gitli, T., and Silverstein, M.S. Bicontinuous hydrogelhydrophobic polymer systems through emulsion templated simultaneous polymerizations. Soft Matter 4, 2475, 2008
35. Gurevitch, I., and Silverstein, M.S. Polymerized pickering HIPEs: Effects of synthesis parameters on porous structure. J Polym Sci A Polym Chem 48, 1516, 2010
36. Gurevitch, I., and Silverstein, M.S. Nanoparticle-based and organic-phase-based AGET ATRP polyHIPE synthesis within pickering HIPEs and surfactant-stabilized HIPEs. Macromolecules 44, 3398, 2011
37. Timmer, M.D., Horch, A.R., Ambrose, C.G., and Mikos, A.G. Effect of physiological temperature on the mechanical properties and network structure of biodegradable poly(propylene fumarate)-based networks. J Biomat Sci Polym Ed 14, 369, 2003
38. Carnachan, R.J., Bokhari, M., Przyborski, S.A., and Cameron, N.R. Tailoring the morphology of emulsiontemplated porous polymers. Soft Matter 2, 608, 2006
39. Dumas, J.E., Zienkiewicz, K., Tanner, S.A., Prieto, E.M., Bhattacharyya, S., and Guelcher, S.A. Synthesis and characterization of an injectable allograft bone/polymer composite bone void filler with tunable mechanical properties. Tissue Eng Part A 16, 2505, 2010
40. Karageorgiou, V., and Kaplan, D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 26, 5474, 2005
41. Coombes, A.G.A., and Meikle, M.C. Resorbable synthetic polymers as replacements for bone graft. Clin Mater 17, 35, 1994
42. Svaldi-Muggli, D., Burkoth, A.K., and Anseth, K.S. Crosslinked polyanhydrides for use in orthopaedic applications: Degradation behavior and mechanics. J Biomed Mater Res 46, 271, 1999
43. Muggli, D.S., Burkoth, A.K., and Anseth, K.S. Crosslinked polyanhydrides for use in orthopedic applications: Degradation behavior and mechanics. J Biomed Mater Res 46, 271, 1999
44. Temenoff, J.S., and Mikos, A.G. Injectable biodegradable materials for orthopedic tissue engineering. Biomaterials 21, 2405, 2000
45. Rai, B., Oest, M.E., Dupont, K.M., Ho, K.H., Teoh, S.H., and Guldberg, R.E. Combination of platelet-rich plasma with polycaprolactone-Tricalcium phosphate scaffolds for segmental bone defect repair. J Biomed Mater Res A 81, 888, 2007
46. Winter, H.H. Can the gel point of a cross-linking polymer be detected by the G¢-G† crossover? Polym Eng Sci 27, 1698, 1987
47. Brandrup, J., Immergut, E.H., and Grulke, E.A. Polymer Handbook, 4th edition. New York: John Wiley, 1999
48. Hulbert, S.F., Young, F.A., Mathews, R.S., Klawitter, J.J., Talbert, C.D., and Stelling, F.H. Potential of ceramic materials as permanently implantable skeletal prostheses. J Biomed Mater Res 4, 433, 1970
49. Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., and Kuboki, Y. Pore size of porous hydroxyapatite as the cellsubstratum controls BMP-induced osteogenesis. J Biochem 121, 317, 1997
50. Cestro, H.J., Salyer, K.E., and Toranto, I.R. Bone growth into porous carbon, polyethylene, and polypropylene prostheses. J Biomed Mater Res 9, 1, 1975