Hot deformation behavior and constitutive modeling of VCN200 low alloy steel

Applied Mathematical Modelling

Volumn 36, Issue 11, 2012, Pages 5624-5632

  Momeni, A ^a   Abbasi, S M ^b   Badri, H ^c  

^a HAMEDAN UNIVERSITY OF TECHNOLOGY   (Iran)

^b K N TOOSI UNIVERSITY OF TECHNOLOGY   (Iran)

^c TARBIAT MODARES UNIVERSITY   (Iran)

Author keywords

Dynamic recrystallization; Flow characteristics; Hot compression; Modeling

Indexed keywords

APPARENT ACTIVATION ENERGY; AVRAMI EQUATIONS; CARBON LOW ALLOY STEEL; CONSTITUTIVE ANALYSIS; DEFORMATION CONDITIONS; DYNAMIC RECOVERY; FLOW CHARACTERISTIC; FLOW CURVES; FLOW SOFTENING; HOT COMPRESSION TESTS; HOT DEFORMATION BEHAVIORS; SINE FUNCTIONS; TEMPERATURE RANGE; WORKING BEHAVIOR; ZENER-HOLLOMON PARAMETER;

COMPRESSION TESTING; DYNAMIC RECRYSTALLIZATION; HOT PRESSING; MODELS; STRAIN RATE;

HOT WORKING;

EID: 84864047304     PISSN: 0307904X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apm.2012.01.008     Document Type: Article

References (23)

1. Mirzadeh H., Cabrera J.M., Prado J.M., Najafizadeh A. Hot deformation behavior of a medium carbon microalloyed steel. Mater. Sci. Eng. A 2011, 528:3876-3882.
2. Momeni A., Shokuhfar A., Abbasi S.M. Dynamic recrystallization of a Cr-Ni-Mo-Cu-Ti-V precipitation hardenable stainless steel. J. Mater. Sci. Tech. 2007, 23:775-778.
3. Momeni A., Dehghani K. Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps. Mater. Sci. Eng. 2010, A527:5467-5473.
4. Meysami M., Akbari Mousavi S.A.A. Study on the behavior of medium carbon vanadium microalloyed steel by hot compression test. Mater. Sci. Eng. 2010, A527:3049-3055.
5. Momeni A., Abbasi S.M. Effect of hot working on flow behavior of Ti-6Al-4V alloy in single phase and two phase regions. Mater. Des. 2010, 31:3599-3604.
6. G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, in: Proceedings of the Seventh International Symposium on Ballistics, Hague, Netherlands, 1983, pp. 541-547.
7. Kim S.I., Lee Y., Byon S.M. Study on constitutive relation of AISI 4140 steel subject to large strain at elevated temperatures. J. Mater. Process. Technol. 2003, 140:84-89.
8. Meysarni A.H., Ghasemzadeh R., Seyedein S.H., Aboutalebi M.R., Ebrahirni R., Javidani M. Physical simulation of hot deformation and microstructural evolution for 42CrMo4 steel prior to direct quenching. J. Iron Steel Res. Int. 2009, 16:47-51.
9. Momeni A., Arabi H., Rezaei A., Badri H., Abbasi S.M. Study on constitutive relation of AISI 4140 steel subject to large strain at elevated temperatures. Mater. Sci. Eng. 2011, A528:2158-2163.
10. Bianchi J.H., Karjalainen L.P. Modelling of dynamic and metadynamic recrystallisation during bar rolling of a medium carbon spring steel. J. Mater. Process. Technol. 2005, 160:267-277.
11. Mandal S., Bhaduri A.K., Subramania Sarma V. A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel. Met. Mater. Trans. 2011, 42A:1062-1072.
12. Momeni A., Dehghani K. Prediction of dynamic recrystallization kinetics and grain size for 410 martensitic stainless steel during hot deformation. Met. Mater. Int. 2010, 16:843-849.
13. Momeni A., Dehghani K., Ebrahimi G.R., Keshmiri H. Modeling the flow curve characteristics of 410 martensitic stainless steel under hot working condition. Metall. Mater. Trans. 2010, 41A:2898-2904.
14. Roberts W., Ahlblom B. A nucleation criterion for dynamic recrystallization during hot working. Acta Mater. 1978, 26:801-813.
15. Ding R., Guo Z.X. Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization. Acta. Mater. 2001, 49:3163-3175.
16. Momeni A., Abbasi S.M., Shokuhfar A. Hot compression behavior of as-cast precipitation-hardening stainless steel. J. Iron Steel Res. Int. 2007, 14:66-70.
17. G.R. Ebrahimi, H. Keshmiri, A. Momeni, M. Mazinani, Dynamic recrystallization behavior of a superaustenitic stainless steel containing 16% Cr and 25% Ni, Mater. Sci. Eng. A, doi:10.1016/j.msea.2011.05.081.
18. J.J. Jonas, T. Sakai, A new approach to dynamic recrystallization, in: G. Krauss (Ed.), ASM Materials Science Seminar, Deformation Processing And Structure, 23-24 Oct., 1982, Missouri, USA, pp. 185-228.
19. Estrin Y., Mecking H. A unified phenomenological description of work hardening and creep based on one-parameter models. Acta Metal. 1984, 32:57-70.
20. A. Momeni, K. Dehghani, G.R. Ebrahimi, Modeling the initiation of dynamic recrystallization using a dynamic recovery model, J. Alloys Comp., doi:10.1016/j.jallcom.2011.07.014.
21. Poliak E.I., Jonas J.J. Initiation of dynamic recrystallization in constant strain rate hot deformation. ISIJ Int. 2003, 43:684-691.
22. W. Roberts, Dynamic changes that occur during hot working and their significance regarding microstructural development and hot workability, in: G. Krauss (Ed.), ASM Materials Seminar, deformation processing and structure, 23-24 Oct., 1982, Missouri, USA, pp. 109-184.
23. Handbook of Workability and Process Design 2003, 35-44. ASM, Materials Park, Ohio. G.E. Dieter, H.A. Kuhn, S.L. Semiatin (Eds.).