A more complete description of the shear rheology of high-temperature, high-shear journal bearing lubrication

Tribology Transactions

Volumn 49, Issue 1, 2006, Pages 39-45

  Bair, Scott ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

HTHS; Journal Bearing; Non Newtonian; Rheology; Shear Thinning

Indexed keywords

ELASTOHYDRODYNAMICS; HIGH PRESSURE EFFECTS; HIGH TEMPERATURE EFFECTS; LUBRICATION; MATHEMATICAL MODELS; RHEOLOGY; VISCOMETERS;

HIGH TEMPERATURE HIGH SHEAR (HTHS); JOURNAL BEARING LUBRICATION; SHEAR THINNING;

JOURNAL BEARINGS;

ELASTOHYDRODYNAMICS; HIGH PRESSURE EFFECTS; HIGH TEMPERATURE EFFECTS; JOURNAL BEARINGS; LUBRICATION; MATHEMATICAL MODELS; RHEOLOGY; VISCOMETERS;

EID: 31344439424     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/05698190500414391     Document Type: Article

References (33)

1. Smith, M. F., Jr. (1989), “History of ASTM Involvement in High-Temperature, High-Shear Oil Viscosity Research,” High-Temperature, High-Shear (HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation, ASTM STP1068, Ed. Spearot, J. A. American Society for Testing and Materials, Philadelphia, pp 3-13.
2. Demko, J. M. (1989), “Development of an ASTM Standard Test Method for Measuring Engine Oil Viscosity Using Capillary Viscometers at High-Temperature and High-Shear Rates,” High-Temperature, High-Shear (HTHS) Oil Viscosity: Measu rement and Relationship to Engine Operation, ASTM STP 1068, Ed. Spearot, J. A., American Society for Testing and Materials, Philadelphia, pp 23-33.
3. American Society for Testing Materials (2001), “Standard Test Method for Measuring Viscosity at HighTemperature and High Shear Rate by Tapered-Plug Viscometer,” D4741, pp 1-5.
4. Spearot, J. A. (1989), “Relating High-Temperature, High-Shear-Rate Viscosity to Engine Operation,” High-Temperature, High-Shear (HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation, ASTM STP 1068, Ed. Spearot, J. A., American Society for Testing and Materials, Philadelphia, pp. 43-59.
5. Vickars, M. A. and Bates, T. W. (1989), “Co-ordinating European Council (CEC) Contribution to the Measurement of High-Temperature, High-Shear-Rate Viscosity and Its Relationship to Engine Operation,” High-Temperature, High-Shear(HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation, ASTM STP 1068, Ed. Spearot, J. A., American Society for Testing and Materials, Philadelphia, pp. 34-42.
6. Bair, S. and Qureshi, F. (2002), “Accurate Measurements of Pressure-Viscosity Behavior in Lubricants,” Tribol. Trans., 45, pp 390-396.
7. Novak, J. D. and Winer, W. O. (1969), “The Effect ofPressure on the NonNewtonian Behavior of Polymer Blended Petroleum Oils,” ASME J. Lubr. Technol., 91, 3, pp 459-463.
8. Pal, R., Sinhasan, R. and Singh, D. V. (1987), “Analysis ofBig-End Bearing Having Non-Newtonian Fluids,” Tribol. Trans., 30, 2, pp 296-302.
9. Fantino, B. and Bou-Said, B. (2003), “Inertia, Shear-Thinning and Thermal Effects on Connecting Rod Bearing Behaviour,” Tribological Research and Design for Engineering Systems, Eds. Dowson, D., Priest, M., Dalmaz, G., Lubrecht, A. A., Elsevier, Amsterdam, pp 779-786.
10. Rastogi, A. and Gupta, R. K. (1991), “Accounting for Lubricant ShearThinning in the Design of Short Journal Bearings,” J. Rheol., 35, 4, pp 589-603.
11. Vijayaraghavan, D. and Brewe, D. E. “Effect of Rate of Viscosity Variation on the Performance of Journal Bearings,” ASME J. Tribol., 120, 1, pp 1-7.
12. Bair, S. (2001) “The High-Pressure, High-Shear Stress Rheology of a Polybutene,” J. Non-Newt. Fluid Mech., 97, pp 53-65.
13. Bair, S. (2002) “The High-Pressure Rheology of Some Simple Model Hydrocarbons,” Proc. IMechE, PartJ. 216, pp 139-149.
14. Schurz, J., Vollrath-Rodiger, M. and Krassig, H. (1981), “Rheologis-che Untersuchungen and Polyacrylnitril-Spinn losungen: Erweiterung des Viskosimeters HV6 fur hoher Temperaturen,” Rheol. Acta, 20, pp 569-578.
15. Yasuda, K., Armstrong, R. C. and Cohen, R. E. (1981), “ShearFlowProper-ties of Concentrated Solutions of Linear and Star Branched Polystyrenes,” Rheol. Acta, 20, pp 163-178.
16. Carreau, P. J. (1972), “Rheological Equations from Molecular Network Theories,” Trans. Soc. Rheol., 16, 1, pp 99-127.
17. Cross, M. M. (1965), “Rheology of Non-Newtonian Fluids, a New Flow Equation for Pseudoplastic Systems,” J. Colloid Sci., 20, p 417.
18. Escudier, M. P., Oliveira, P. J. and Pinho, F. T. (2002), “Fully Developed Laminar Flow of Purely Viscous Non-Newtonian Liquids through Annuli,” Int. J. Heat Fluid Flow, 23, pp. 52-73.
19. Taylor, R. I. (1999), “The Inclusion of Lubricant Shear-Thinning in Journal Bearing Models”, Lubrication at the Frontier, Eds. Dowson, D., Priest, M., Taylor, C. M., Ehret, P, Childs, T. H. C., Dalmaz, G., Lubrecht, A. A., Elsevier, Amsterdam, pp. 611-618.
20. Bair, S. (2004), “A Rough Shear-Thinning Correction for EHD Film Thickness,” Tribol. Trans., 47, 3, pp 361-365.
21. Bird, R. B., Armstrong, R. C. and Hassager, O. (1987), Dynamics of Polymeric Liquids, Vol. 1, Fluid Mechanics, Wiley, New York, pp 94-228.
22. Bair, S. and Qureshi, F. (2003), “The Generalized Newtonian Fluid Model and Elastohydrodynamic Film Thickness,” ASME J. Tribol., 125, pp 70-75.
23. Van Krevelen, D. W. (1990), Properties of Polymers: Their Correlation with Chemical Structure: Their Numerical Estimation and Prediction, 3rd ed., Elsevier, Amsterdam, p 477.
24. Bair, S. and Qureshi, F. (2003), “The High-Pressure Rheology of Polymer-Oil Solutions,” Tribol. Int., 36, pp 637-645.
25. Ferry, J. D. (1961), Viscoelastic Properties of Polymers, Wiley, New York, pp 292-346.
26. Tanner, R. I. (2000), Engineering Rheology, 2nd ed. Oxford, pp 455-471.
27. Bair, S. and Qureshi, F. (2003), “Ordinary Shear-Thinning and Its Effect upon EHL Film Thickness,” Tribological Research and Design for Engineering Systems, Eds. Dowson, D., Priest, M., Dalmaz, G., Lubrecht, A. A., Elsevier, Amsterdam, pp 693-699.
28. Bair, S. (1998), “Elastohydrodynamic Film Forming with Shear Thinning Liquids,” ASMEJ. Tribol., 120, pp. 173-178.
29. Cameron, A. (1970), Basic Lubrication Theory, Longman, London, pp 71-90.
30. Bair, S. and Kottke, P. (2003), “Pressure-Viscosity Relationships for Elas-tohydrodynamics,” Tribol. Trans., 46, pp 289-295.
31. Raimondi, A. A. and Boyd, J. (1958), “A Solution for the Finite Journal Bearing and Its Application to Analysis and Design, Part I, II, and III, Trans. ASLE, 1,1, pp 159-209.
32. Larson, R. G. (1988), Constitutive Equations for Polymer Melts and Solutions, Butterworths, Boston, p. 26.
33. Kottke, P. A., Bair, S. and Winer, W. O. (2005), “Cavitation in Creeping Shear Flows,” AIChE J., 51, 8, pp 2150-2170.