-
1
-
-
39849088301
-
Increased efficiency versus increased reliability
-
Bonnett, A.H., and Yung, C, "Increased Efficiency Versus Increased Reliability", IEEE Industry) Applications Magazine, Vol. 14 No 1, 2008, pp. 29-36.
-
(2008)
IEEE Industry) Applications Magazine
, vol.14
, Issue.1
, pp. 29-36
-
-
Bonnett, A.H.1
Yung, C.2
-
2
-
-
57049108122
-
Doubly fed induction machines diagnosis based on signature analysis of rotor modulating signals
-
Stefani, A., Yazidi, A., Rossi, C, Filippetti, F., Casadei, D. And Capolino, G. A., "Doubly Fed Induction Machines Diagnosis Based on Signature Analysis of Rotor Modulating Signals", IEEE Transactions on Industry Applications, Vol. 36 No 6, 2008, pp. 1717-1721.
-
(2008)
IEEE Transactions on Industry Applications
, vol.36
, Issue.6
, pp. 1717-1721
-
-
Stefani, A.1
Yazidi, A.2
Rossi, C.3
Filippetti, F.4
Casadei, D.5
Capolino, G.A.6
-
3
-
-
51149119285
-
Modulation of transient reactances of induction machines caused by different types of eccentricity
-
Poland
-
Wolbank, T.M., and Macheiner, P.E., "Modulation of transient reactances of induction machines caused by different types of eccentricity", The IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives in Cracow, Poland, 2007, pp. 89-94.
-
(2007)
The IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives in Cracow
, pp. 89-94
-
-
Wolbank, T.M.1
Macheiner, P.E.2
-
4
-
-
84879915688
-
Quantitative rotor broken bar evaluation in double squirrel cage induction machines under dynamic operating conditions
-
Monte Carlo, Monaco, March 27-30 doi: 10. 1109/EVER. 2013. 6521572, 2013
-
Gritli, Y., Di Tommaso, A.O., Miceli, R., Rossi, C, Filippetti, F., "Quantitative rotor broken bar evaluation in double squirrel cage induction machines under dynamic operating conditions", 2013 8th International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER), Monte Carlo, Monaco, March 27-30 2013, DOI: 10.1109/EVER.2013.6521572, 2013, Page(s): 1-6.
-
(2013)
2013 8th International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER)
, pp. 1-6
-
-
Gritli, Y.1
Di Tommaso, A.O.2
Miceli, R.3
Rossi, C.4
Filippetti, F.5
-
5
-
-
84866893346
-
Investigation of motor current signature and vibration analysis for diagnosing rotor broken bars in double cage induction motors
-
doi: 10. 1109/SPEEDAM. 2012. 6264465
-
Gritli, Y., Di Tommaso, A.O., Filippetti, F., Miceli, R., Rossi, C, Chatti, A., "Investigation of motor current signature and vibration analysis for diagnosing rotor broken bars in double cage induction motors", 2012 International Symposium Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), DOI: 10.1109/SPEEDAM.2012.6264465, 2012,Page(s): 1360-1365.
-
(2012)
2012 International Symposium Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM)
, pp. 1360-1365
-
-
Gritli, Y.1
Di Tommaso, A.O.2
Filippetti, F.3
Miceli, R.4
Rossi, C.5
Chatti, A.6
-
6
-
-
78650115234
-
Evaluation of the detectability of broken rotor bars for double squirrel cage rotor induction motors
-
Atlanta, Georgia
-
Park, J., Kim, B., Yang, J., Lee, K., Lee, S.B., Wiedenbrug, E.J., Teska, M., and Han, S., "Evaluation of the Detectability of Broken Rotor Bars for Double Squirrel Cage Rotor Induction Motors", the IEEE Energy Conversion Congress and Exposition, Atlanta, Georgia, 2010, pp. 2493-2500.
-
(2010)
The IEEE Energy Conversion Congress and Exposition
, pp. 2493-2500
-
-
Park, J.1
Kim, B.2
Yang, J.3
Lee, K.4
Lee, S.B.5
Wiedenbrug, E.J.6
Teska, M.7
Han, S.8
-
7
-
-
53849131666
-
Test bench realization and application of specific working cycles for the characterization of wheelchair electrical drives
-
V. Cecconi, V. Di Dio, A. Di Tommaso, D. La Cascia, and R. Miceli, "Test Bench Realization and Application of Specific Working Cycles for the Characterization of Wheelchair Electrical Drives," in Industrial Electronics, 2006 IEEE International Symposium on, 2006, vol. 3, pp. 2188-2193.
-
(2006)
Industrial Electronics, 2006 IEEE International Symposium on
, vol.3
, pp. 2188-2193
-
-
Cecconi, V.1
Di Dio, V.2
Di Tommaso, A.3
La Cascia, D.4
Miceli, R.5
-
8
-
-
27944452595
-
Remote diagnosis and control of wheelchair electrical drive systems
-
V. Di Dio, R. Miceli, and G. Ricco Galluzzo, "Remote diagnosis and control of wheelchair electrical drive systems," in industrial Technology, 2004. IEEE 1CIT '04. 2004 IEEE International Conference on, 2004, vol. 2, p. 996-1001 Vol. 2.
-
(2004)
Industrial Technology, 2004. IEEE 1CIT '04. 2004 IEEE International Conference on
, vol.2
, pp. 996-1001
-
-
Di Dio, V.1
Miceli, R.2
Ricco Galluzzo, G.3
-
9
-
-
84867114687
-
A photovoltaic system suitable for the battery pack charging of an electrically power assisted velocipede
-
G. Cipriani, V. Di Dio, and G. Ricco Galluzzo, "A photovoltaic system suitable for the battery pack charging of an electrically power assisted velocipede," in Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2012 International Symposium on, 2012, pp. 1142-1147.
-
(2012)
Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2012 International Symposium on
, pp. 1142-1147
-
-
Cipriani, G.1
Di Dio, V.2
Ricco Galluzzo, G.3
-
10
-
-
77956579214
-
An electrochemical route towards the fabrication of nanostructured semiconductor solar cells
-
R. Inguanta, S. Piazza, C. Sunseri, A. Cino, V. Di Dio, D. L. Cascia, R. Miceli, C. Rando, and G. Zizzo, "An electrochemical route towards the fabrication of nanostructured semiconductor solar cells," in Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010, pp. 1166-1171.
-
(2010)
Power Electronics Electrical Drives Automation and Motion (SPEEDAM)
, pp. 1166-1171
-
-
Inguanta, R.1
Piazza, S.2
Sunseri, C.3
Cino, A.4
Di Dio, V.5
Cascia, D.L.6
Miceli, R.7
Rando, C.8
Zizzo, G.9
-
11
-
-
65249149139
-
Integrated mathematical model of proton exchange membrane fuel cell stack (PEMFC) with automotive synchronous electrical power drive
-
V. Di Dio, D. La Cascia, R. Liga, and R. Miceli, "Integrated mathematical model of proton exchange membrane fuel cell stack (PEMFC) with automotive synchronous electrical power drive," in Electrical Machines, 2008. ICEM2008. 18th International Conference on, 2008, pp. 1-6.
-
(2008)
Electrical Machines, 2008. ICEM2008. 18th International Conference on
, pp. 1-6
-
-
Di Dio, V.1
La Cascia, D.2
Liga, R.3
Miceli, R.4
-
12
-
-
57749187815
-
Differential diagnosis based on multivariable monitoring to assess induction machine rotor conditions
-
Concari, C, Franceschini, G., and Tassoni, C," Differential Diagnosis Based on Multivariable Monitoring to Assess Induction Machine Rotor Conditions", IEEE Transactions on Industrial Electronics, Vol. 55 No. 12, 2008, pp. 4156-4166.
-
(2008)
IEEE Transactions on Industrial Electronics
, vol.55
, Issue.12
, pp. 4156-4166
-
-
Concari, C.1
Franceschini, G.2
Tassoni, C.3
-
13
-
-
67349131568
-
Novel methodology for online half-broken-bar detection on induction motors
-
Rangel-Magdaleno, I. J., Romero-Troncoso, R. J., Osornio-Rios, R. A., Cabal-Yepez, E., and Contreras-Medina, L. M., "Novel Methodology for Online Half-Broken-Bar Detection on Induction Motors", IEEE Transactions on Instrumentation and Measurement, Vol. 58 No. 5, 2009, pp. 1690-1698.
-
(2009)
IEEE Transactions on Instrumentation and Measurement
, vol.58
, Issue.5
, pp. 1690-1698
-
-
Rangel-Magdaleno, I.J.1
Romero-Troncoso, R.J.2
Osornio-Rios, R.A.3
Cabal-Yepez, E.4
Contreras-Medina, L.M.5
-
14
-
-
57749196360
-
Advances in diagnostic techniques for induction machines
-
Bellini, A., Filippetti, F., Tassoni, C, and Capolino, G. A., "Advances in diagnostic Techniques for induction machines", IEEE Transactions on Industrial Electronics, Vol. 55 No 12, 2008, pp. 4109-4126.
-
(2008)
IEEE Transactions on Industrial Electronics
, vol.55
, Issue.12
, pp. 4109-4126
-
-
Bellini, A.1
Filippetti, F.2
Tassoni, C.3
Capolino, G.A.4
-
15
-
-
0028392902
-
Assessment of interbar currents in double cage induction motors with broken bars
-
Walliser, R.F., and Landy, C.F., "Assessment of interbar currents in double cage induction motors with broken bars ", IEEE Transactions on Energy Conversion, Vol. 9 No. 1, 1994, pp.159-164.
-
(1994)
IEEE Transactions on Energy Conversion
, vol.9
, Issue.1
, pp. 159-164
-
-
Walliser, R.F.1
Landy, C.F.2
-
16
-
-
81255210421
-
Monitoring and diagnosis of failures in squirrel-cage induction motors due to cracked or broken bar
-
Italy
-
Di Tommaso, A.O., Miceli, R., and Ricco Galluzzo, G., "Monitoring and Diagnosis of Failures in Squirrel-Cage Induction Motors Due to Cracked or Broken Bar", the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives in Bologna, Italy, 2011, pp. 39-44.
-
(2011)
The IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives in Bologna
, pp. 39-44
-
-
Di Tommaso, A.O.1
Miceli, R.2
Ricco Galluzzo, G.3
-
18
-
-
84872527471
-
Adc based measurements:A common basis for the uncertainty estimation
-
Slovakia. September, 08-10
-
C. Spataro: "ADC Based Measurements: a Common Basis for the Uncertainty Estimation", Proc. of 17th IMEKO-TC4 Symposium. Kosice, Slovakia. September, 08-10. 2010
-
(2010)
Proc. of 17th IMEKO-TC4 Symposium. Kosice
-
-
Spataro, C.1
-
19
-
-
85084023930
-
Electromagnetic immunity of a portable pC-based measurement instrument
-
Perugia, Italy, September
-
S. Nuccio, C. Spataro, G. Tine: "Electromagnetic immunity of a portable PC-based measurement instrument", Proc. of IWADC 2003, Perugia, Italy, September 2003.
-
(2003)
Proc. of IWADC 2003
-
-
Nuccio, S.1
Spataro, C.2
Tine, G.3
-
20
-
-
51849140082
-
Virtual instruments:Uncertainty evaluation in the presence of unknown electromagnetic interferences
-
Italy, 21-22 July
-
S. Nuccio, C. Spataro, G. Tine: "Virtual instruments: Uncertainty evaluation in the presence of unknown electromagnetic interferences", Proc. of AMUEM 2008-International Workshop on Advanced Methods for Uncertainty Estimation in Measurement-Trento, Italy, 21-22 July 2008, pp. 56-61.
-
(2008)
Proc. of AMUEM 2008-International Workshop on Advanced Methods for Uncertainty Estimation in Measurement-Trento
, pp. 56-61
-
-
Nuccio, S.1
Spataro, C.2
Tine, G.3
|