Design of newly fabricated tribological machine for wear and frictional experiments under dry/wet condition

Materials and Design

Volumn 48, Issue , 2013, Pages 2-13

  Yousif, B F ^a  

^a UNIVERSITY OF SOUTHERN QUEENSLAND   (Australia)

Author keywords

Composite; Contact mechanism; Design; Machine; Tribology

Indexed keywords

ABRASIVES; COMPOSITE MATERIALS; DESIGN; MACHINING; RUBBER; TRIBOLOGY; WHEELS;

ADHESIVE WEARS; CONTACT CONDITIONS; CONTACT MECHANISM; ENGINEERING MATERIALS; FRICTION COEFFICIENTS; GLASS FIBRE REINFORCED POLYESTER; INTERFACE TEMPERATURES; TRIBOLOGICAL PERFORMANCE;

FRICTION;

EID: 84892896479     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2012.06.046     Document Type: Article

References (44)

1. Bhushan B. Nanotribology and nanomechanics: an introduction. Springer; 2008.
2. Yousif BF, Nirmal U, Wong KJ. Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Mater Des 2010;31(9):4514-21.
3. Ben Difallah B et al. Mechanical and Tribological Response of ABS Polymer Matrix Filled with Graphite Powder. Mater Des 2012;34:782-7.
4. El-Tayeb NSM, Yousif BF, Yap TC. An investigation on worn surfaces of chopped glass fibre reinforced polyester through SEM observations. Tribol Int 2008;41(5):331-40.
5. Bansal DG, Streator JL. Corrigendum to a method for obtaining the temperature distribution at the interface of sliding bodies. Wear 2011. http://dx.doi.org/ 10.1016/j.wear.2008.08.019 [Wear, 2009; 266: 721-732].
6. Narish S, Yousif BF, Rilling D. Adhesive wear of thermoplastic composite based on kenaf fibres. Proc Inst Mech Eng J: J Eng Tribol 2011;225(2):101-9.
7. Yousif BF, El-Tayeb NSM. Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques. Proc Inst Mech Eng J: J Eng Tribol 2010;224(2):123-31.
8. Yousif BF, El-Tayeb NSM. Adhesive wear performance of T-OPRP and UT-OPRP composites. Tribol Lett 2008;32(3):199-208.
9. Jawaid M, Abdul Khalil HPS, Abu Bakar A. Woven hybrid composites: tensile and flexural properties of oil palm-woven jute fibres based epoxy composites. Mater Sci Eng: A 2011;528(15):5190-5.
10. 2 particulate filled functionally graded composites materials using Taguchi design of experiment. Mater Des 2011;32(2):615-27.
11. Unal H et al. Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions. Mater Des 2004;25(3):239-45.
12. Nirmal U et al. On the effect of different polymer matrix and fibre treatment on single fibre pullout test using betelnut fibres. Mater Des 2011;32(5):2717-26.
13. 2 particulate filled functionally graded composites materials using Taguchi design of experiment. Mater Des 2011;32(2):615-27.
14. Wang Q, Zhang X, Pei X. Study on the synergistic effect of carbon fiber and graphite and nanoparticle on the friction and wear behavior of polyimide composites. Mater Des 2010;31(8):3761-8.
15. Bassani R et al. Friction and wear of epoxy resin on inox steel: remarks on the influence of velocity, load and induced thermal state. Wear 2001;247(2):125-32.
16. Benabdallah H. Friction and wear of blended polyoxymethylene sliding against coated steel plates. Wear 2003;254(12):1239-46.
17. Hashmi SAR, Dwivedi UK, Chand N. Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions. Wear 2007;262(11- 12):1426-32.
18. Pihtili H. An experimental investigation of wear of glass fibre-epoxy resin and glass fibre-polyester resin composite materials. Eur Polym J 2009;45(1):149-54.
19. Suresha B et al. Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites. Tribol Int 2010;43(3):602-9.
20. Basavarajappa S, Ellangovan S, Arun KV. Studies on dry sliding wear behaviour of graphite filled glass-epoxy composites. Mater Des 2009;30(7):2670-5.
21. Quintelier J et al. On the SEM features of glass-polyester composite system subjected to dry sliding wear. Wear 2006;261(7-8):703-14.
22. Coronado JJ. Effect of load and carbide orientation on abrasive wear resistance of white cast iron. Wear 2011.
23. Rasheva Z, Zhang G, Burkhart T. A correlation between the tribological and mechanical properties of short carbon fibers reinforced PEEK materials with different fiber orientations. Tribol Int 2010;43(8):1430-7.
24. Yousif BF, El-Tayeb NSM. Wear characteristics of thermoset composite under high stress three-body abrasive. Tribol Int 2010;43(12):2365-71.
25. El-Tayeb NSM, Yousif BF, Yap TC. Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear 2006;261(3-4):443-52.
26. Hild W et al. The effect of wetting on the microhydrodynamics of surfaces lubricated with water and oil. Wear 2003;254(9):871-5.
27. Yousif BF, El-Tayeb NSM. Wear and friction characteristics of CGRP composite under wet contact condition using two different test techniques. Wear 2008;265(5-6):856-64.
28. Pan XD. Wet sliding friction of elastomer compounds on a rough surface under varied lubrication conditions. Wear 2007;262(5-6):707-17.
29. ASTM G99-05. Standard test method for wear testing with a pin-on-disk apparatus, WC; 2010.
30. ASTM G77-98. Standard test method for ranking resistance of materials to sliding wear using block-on-ring wear test, WC; 2010.
31. ASTM G65-04. Standard test method for measuring abrasion using the dry sand/rubber wheel apparatus, WC; 2010.
32. ASTM G105-02. Standard test method for conducting wet sand/rubber wheel abrasion tests, WC; 2007.
33. ASTM B611-85. Standard test method for abrasive wear resistance of cemented carbides, WC; 2005.
34. Yousif BF. Effect of oil palm fibres volume fraction on mechanical properties of polyester composites. Int J Modern Phys B 2010;24(23):4459-70.
35. Hufenbach WA et al. Tribo-mechanical properties of glass fibre reinforced polypropylene composites. Tribol Int 2012;49:8-16.
36. Kim SS, Shin MW, Jang H. Tribological properties of short glass fiber reinforced polyamide 12 sliding on medium carbon steel. Wear 2012;274-275:34-42.
37. Sharma M, Bijwe J. Influence of fiber-matrix adhesion and operating parameters on sliding wear performance of carbon fabric polyethersulphone composites. Wear 2011;271(11-12):2919-27.
38. Yousif BF, Nirmal U. Wear and frictional performance of polymeric composites aged in various solutions. Wear 2011;272(1):97-104.
39. El-Tayeb N, Yousif B, Yap T. Tribological studies of polyester reinforced with CSM 450-R-glass fiber sliding against smooth stainless steel counterface. Wear 2006;261(3-4):443-52.
40. Tang Q, Chen J, Liu L. Tribological behaviours of carbon fibre reinforced PEEK sliding on silicon nitride lubricated with water. Wear 2010;269(7-8):541-6.
41. Chen B, Wang J, Yan F. Comparative investigation on the tribological behaviors of CF/PEEK composites under sea water lubrication. Tribol Int 2012;52:170-7.
42. Chauhan SR, Kumar A, Singh I. Sliding friction and wear behaviour of vinylester and its composites under dry and water lubricated sliding conditions. Mater Des 2010;31(6):2745-51.
43. Wang J, Yan F, Xue Q. Tribological behavior of PTFE sliding against steel in sea water. Wear 2009;267(9-10):1634-41.
44. Abdelbary A, et al. The effect of surface defects on the wear of Nylon 66 under dry and water lubricated sliding. Tribol Int; in press. http://dx.doi.org/10.1016/ j.triboint.2012.06.004.