A correlation between the tribological and mechanical properties of short carbon fibers reinforced PEEK materials with different fiber orientations

Tribology International

Volumn 43, Issue 8, 2010, Pages 1430-1437

  Rasheva, Z ^a   Zhang, G ^a   Burkhart, Th ^a  

^a INSTITUT FÜR VERBUNDWERKSTOFFE GMBH   (Germany)

Author keywords

Fiber orientation; PEEK composites; Wear

Indexed keywords

COMPRESSION MODULUS; COMPRESSION STRENGTH; FIBER ORIENTATIONS; HIGH PRESSURE; INJECTION MOLDING TECHNIQUES; MECHANICAL AND TRIBOLOGICAL PROPERTIES; MECHANICAL PERFORMANCE; SCANNING ELECTRON MICROSCOPES; SHORT CARBON FIBERS; TRIBOLOGICAL EXPERIMENTS; TRIBOLOGICAL PROPERTIES;

CARBON FIBER REINFORCED PLASTICS; ETHERS; ETHYLENE; FIBER REINFORCED MATERIALS; FIBERS; INJECTION MOLDING; LAMINATES; MECHANICAL PROPERTIES; ORGANIC COMPOUNDS; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; TRIBOLOGY; WEAR RESISTANCE;

CARBON FIBERS;

ABRASION RESISTANCE; CARBON FIBERS; COMPOSITES; ETHERS; ETHYLENE; FIBER ORIENTATION; FIBERS; INJECTION MOLDING; LAMINATES; MECHANICAL PROPERTIES; ORGANIC COMPOUNDS; REINFORCED PLASTIC; SCANNING ELECTRON MICROSCOPY;

EID: 77953287018     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2010.01.020     Document Type: Article

References (21)

1. Voss H., and Friedrich K. On the wear behavior of short fiber reinforced PEEK composites. Wear 116 (1987) 1-18
2. Bhushan B., and Gupta B.K. Handbook of tribology: materials, coatings and surface treatments (1991), McGraw-Hill [chapter 5]
3. Zhang X., Liao G., Jin Q., Feng X., and Jian X. On dry sliding friction and wear behavior of PPESK filled with PTFE and graphite. Tribology International 41 (2008) 195-201
4. Wang Q.H., Xue Q.J., Lui W.M., and Chen J.M. The friction and wear characteristics of nanometer SiC and polytetrafluorethylene filled polyetheretherketone. Wear 243 (2000) 140-146
5. Tanaka K., and Kawakami S. Effects of various fillers on the friction and wear of PTFE-based composites. Wear 79 (1982) 221-234
6. Gyurova L.A., and Schlarb A.K. State-of-the-art: on the action of various reinforcing fillers and additives for improving the sliding friction and wear performance of polymer composites. Part 1: short fibres, internal lubricants, particulate fillers. Journal of Plastics Technology 4 6 (2008) 1-31
7. Friedrich K., Lu Z., and Häger A.M. Recent advances in polymer composites' tribology. Wear 190 (1995) 139-144
8. Karger-Kocsis J., and Friedrich K. Temperature and strain-rate effects on the fracture toughness of poly (ether ether ketone) and its short glass-fibre reinforced composite. Polymer 27 (1986) 1753-1760
9. Hull D. An introduction to composite materials. Cambridge solid state science series (1981), Cambridge University Press, Cambridge p. 157
10. Bernasconi A., Cosmi F., and Dreossi D. Local anisotropy analysis of injection molded fiber reinforced polymer composites. Composites Science and Technology 68 (2008) 2574-2581
11. Friedrich K. Wear models for multiphase materials. In: Friedrich K, editor, Pipes RB, series editor, Advances in composite Tribology. Composite Materials Series, Elsevier Science Publishers, B.V.; 1993. p. 209-70.
12. Lu Z.P., and Friedrich K. On sliding friction and wear of PEEK and its composites. Wear 181-183 (1995) 624-631
13. Zhang Z., Breidt C., Chang L., and Friedrich K. Wear of PEEK composites to their mechanical properties. Tribology International 37 (2004) 271-277
14. Bhawani S., Furey T., and Furey M.J. Tribological behavior of unidirectional graphite-epoxy and carbon PEEK composites. Wear 162-164 (1993) 385-396
15. Sumer M., Hunal H., and Mimaroglu A. Evaluation of tribological behavior of PEEK and glass fibre reinforced PEEK under dry sliding and water lubricated conditions. Wear 265 (2008) 1061-1065
16. Davim J.P., and Cardoso R. Effect of the reinforcement (carbon or glass fibres) on friction and wear behavior of the PEEK against steel surface at long dry sliding. Wear 266 (2009) 795-799
17. Zhang G., and Schlarb A.K. Correlation of the tribological behaviors with the mechanical properties of poly-ether-ether-ketones (PEEKs) with different molecular weights and their fiber filled composites. Wear 266 (2009) 337-344
18. Friedrich K., Zhang Z., and Schlarb A.K. Effects of various fillers on the sliding wear of polymer composites. Composites Science and Technology 65 (2005) 329-2343
19. Zhang G, Rasheva Z, Schlarb AK. Friction and wear variations of short carbon fiber (SCF)/PTFE/graphite (10 vol%) filled PEEK: effects of fiber orientation and nominal contact pressure. Wear 2009, in press.
20. Friedrich K. Wear of reinforced polymers by different abrasive counterparts. In: Friedrich K, editor, Pipes RB, series editor. Friction and wear of polymer composites, composite materials series. Elsevier Science Publishers, B.V., 1986. p. 233-85.
21. Chang L. Friction and wear of nanoparticle filled polymer composites. Institut für Verbundwerkstoffe, Kaiserslautern, Band 2005; 60. p. 32-94.