Metal-ceramic bond mechanism of the Co-Cr alloy denture with original rough surface produced by selective laser melting

Chinese Journal of Mechanical Engineering (English Edition)

Volumn 27, Issue 1, 2014, Pages 69-78

  Zhang, Sheng ^a   Li, Yong ^b   Hao, Liang ^c   Xu, Tian ^a   Wei, Qingsong ^a   Shi, Yusheng ^a  

^a HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b WUHAN UNIVERSITY   (China)

^c UNIVERSITY OF EXETER   (United Kingdom)

Author keywords

Co Cr alloy; Metal ceramic bond strength; Selective laser melting (SLM)

Indexed keywords

CO-CR ALLOYS; METAL-CERAMIC BONDS; PORCELAIN FUSED TO METALS; PROMINENT STRUCTURES; SELECTIVE LASER MELTING; SURFACE-ROUGHENING; THREE-POINT BENDING TEST; X-RAY ENERGY SPECTRUM;

BOND STRENGTH (MATERIALS); CHROMIUM ALLOYS; FRACTURE; METALS; PORCELAIN; RESTORATION; SCANNING ELECTRON MICROSCOPY; SURFACE MEASUREMENT; SURFACE ROUGHNESS;

CHROMIUM;

EID: 84892863634     PISSN: 10009345     EISSN: None     Source Type: Journal    
DOI: 10.3901/CJME.2014.01.069     Document Type: Article

References (26)

1. ANUSAVICE K J. Phillips' science of dental materials [M]. 11th ed. Philadelphia: W.B. Saunders, 2003.
2. ZHANG Lijun. Evaluation of bond characteristics between porcelain and titanium fabricated by laser rapid forming [D]. Xi'an: Fourth Military Medical University, 2009. (in Chinese)
3. TAKAHASHI J, ZHANG J Z, OKSZAKI M. Cast ability and surface hardness of titanium cast plates obtained from experimental phosphate-bonded silica molds [J]. Dental Materials Journal, 1994, 12(2): 238-244.
4. UENO S. Studies on the application of sintered titanium alloys for metal-ceramic restorations [J]. Dental Materials Journal, 1992, 11(4): 44-56.
5. VENCE B S. Electroforming technology for galvano-ceramic restorations [J]. Journal of Prosthodontics, 1997, 77(4): 444-449.
6. SAMET N, RESHEFF B, GELBARD S, et al. A CAD/CAM system for the production of metal coping for porcelain-fused-to-metal restoration [J]. Journal of Prosthetic Dentistry, 1995, 73(5): 457-463.
7. ALKHIARY Y M, MORGANO S M, GIORDANO R A. Effects of acid hydrolysis and mechanical polishing on surface residual stresses of low fusing dental ceramics [J]. Journal of Prosthetic Dentistry, 2003, 90(2): 133-142.
8. LIBBY G, ARCURI M R, LAVELLE W E, et al. Longevity of fixed partial dentures [J]. Journal of Prosthetic Dentistry, 1997, 7(82): 127-131.
9. Product information: PM100 Dental, Phenix TM Systems [EB/OL]. [2013-07-01]. http://www.phenix-systems.com.
10. VAN BAEL S, KERCKHOFS G, MOESEN M, et al. Micro-CT based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures [J]. Materials Science and Engineering A, 2011, 528(24): 7423-7431.
11. YAN Zhangong, LIN Feng, QIN Haibo, et al. Overview of direct metal rapid prototyping and manufacturing technologies [J]. Chinese Journal of Mechanical Engineering, 2005, 41(11): 1-7.
12. 4V [J]. Chinese Journal of Mechanical Engineering, 2013, 26(4): 1-8.
13. SHANG Xiaofeng, LIU Weijun, WANG Tianran. Scanning mode of the metal powder laser shaping [J]. Chinese Journal of Mechanical Engineering, 2005, 41(7): 99-102.
14. XIN Xianzhen, XIANG Nan, CHEN Jie, et al. Corrosion characteristics of a selective laser melted Co-Cr dental alloy under physiological conditions [J]. Journal of Materials Science, 2012, 47(12): 4813-4820.
15. SHANG Xiaofeng, LIU Weijun, WANG Wei, et al. Slope limit of part made in metal powder laser shaping [J]. Chinese Journal of Mechanical Engineering, 2007, 3(8): 97-100.
16. BENNETT R C, SUTCLIFFE C H. Selective laser melting in applications and developments using MCP Realizer SLM [J]. Proceedings of the Fourth Laser Assisted Net Shape Engineering, 2004: 541-545.
17. COULON N, AUBRY P, TEULET P. New trends in laser sintering: analysis of the process and new applications [J]. Proceedings of the Laser Materials Processing Conference, 2005: 286-295.
18. XIANG Nan, XIN Xianzhen, CHEN J, et al. Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting [J]. Journal of Dentistry, 2012, 40(6): 453-457.
19. JEVREMOVIC D, PUSKAR T, KOSEC B, et al. The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD) [J]. Metalurgija, 2012, 51(2): 171-174.
20. JEVREMOVIC D, KOJIC V, BOGDANOVIC G, et al. A selective laser melted Co-Cr alloy used for the rapid manufacture of removable partial denture frameworks: Initial screening of biocompatibility [J]. Journal of the Serbian Chemical Society, 2011, 76(1): 43-52.
21. XIN X, XIANG N, CHEN J, et al. In vitro biocompatibility of Co-Cr alloy fabricated by selective laser melting or traditional casting techniques [J]. Materials Letters, 2012, 88: 101-103.
22. KIM B, ZHANG Y, PINES M. Fracture of porcelain-veneered structures in fatigue [J]. Journal of Dental Research, 2007, 86(2): 142-146.
23. REYES M J, OSHIDA Y, ANDRES C J, et al. Titanium porcelain system Part III: effects of surface modification on bond strengths [J]. Bio-Medical Materials and Engineering, 2001, 11(2): 117-136.
24. HAMMAD I A, YOUSEF F T. Designs of bond strength tests for metal-ceramic complexes: review of the literature [J]. The Journal of Prosthetic Dentistry, 1996, 75(6): 602-608.
25. MA Xixian. Prosthodontics [M]. 5th ed. Beijing: People's Medical Publishing House, 2006. (in Chinese)
26. ZINELIS S, BARMPAGADAKI X, VERGOS V, et al. Bond strength and interfacial characterization of eight low fusing porcelains to cpTi [J]. Dental Materials Journal, 2010, 26(3): 264-273.