Experimental study of the dry facing of magnesium pieces based on the surface roughness

International Journal of Precision Engineering and Manufacturing

Volumn 14, Issue 6, 2013, Pages 995-1001

  Rubio, Eva Maria ^a   Valencia, Jose Luis ^b   Saá, Adolfo José ^a   Carou, Diego ^a  

^a UNIVERSIDAD NACIONAL DE EDUCACIÓN A DISTANCIA   (Spain)

^b UNIVERSIDAD COMPLUTENSE DE MADRID   (Spain)

Author keywords

ANOVA; Dry face turning; Magnesium UNS M11917; Optimization; Surface roughness; Sustainable machining; Taguchi design of experiments

Indexed keywords

DESIGN OF EXPERIMENTS; ENVIRONMENTAL IMPACT; MAGNESIUM; OPTIMIZATION; REPAIR; SURFACE ROUGHNESS; TURNING;

ANALYSIS OF VARIANCE METHOD; COOLING TECHNIQUE; CUTTING CONDITIONS; REDUCING COSTS; REPAIR AND MAINTENANCE; SPINDLE SPEED; SURFACE FINISHES; TAGUCHI DESIGN OF EXPERIMENT;

ANALYSIS OF VARIANCE (ANOVA);

EID: 84892836164     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-013-0132-9     Document Type: Article

References (35)

1. Gil, F. J., Manero, J. M., Rodríguez, D., and Aparicio, C., "Light Alloy," Ediciones de la Universidad Politécnica de Cataluña S. L., 2001.
2. Shan, Z., Qin, S., Liu, Q., and Liu, F., "Key manufacturing technology & equipment for energy saving and emissions reduction in mechanical equipment industry," Int. J. Precis. Eng. Manuf., Vol. 13, No. 7, pp. 1095-1100, 2012.
3. Lee, E. S., Won, J. K., Shin T. H., and Kim, S. H., "Investigation of machining characteristics for electrochemical micro-deburring of the AZ31 lightweight magnesium alloy," Int. J. Precis. Eng. Manuf., Vol. 13, No. 3, pp. 339-345, 2012.
4. Shin, H. W., "A feasibility study to replace steel made hood panels by magnesium alloy made hood panels," Int. J. Precis. Eng. Manuf., Vol. 13, No. 11, pp. 2011-2016, 2012.
5. Catón, P. D., "Magnesium: an old material with new applications," Mater. Design, Vol. 2, No. 6, pp. 309-316, 1991.
6. Ballerini, G., Bardi, U., Lavacchi, A., and Migliorini, D., "Magnesium alloys for structural automotive applications," Proceedings of the 7th Int. Conf. HTCES, Modena, Italy, 2001.
7. Rubio, E. M., Sáenz de Pipaón, J. M., Villeta, M., and Sebastian, M. A., "Study of surface roughness of pieces of magnesium UNS M11311 obtained by dry turning using ANOVA," Adv. Mat. Res., Vol. 264-265, pp. 967-972, 2011.
8. Villeta, M., Agustina, B., Sáenz de Pipaón, J. M., and Rubio, E. M., "Efficient optimisation of machining processes based on technical specifications for surface roughness: Application to magnesium pieces in the aerospace industry," Int. J. Adv. Manuf. Tech., Vol. 60, No. 9-12, pp. 1237-1246, 2011.
9. Rubio, E. M., Valencia, J. L., Carou, D., and Saá, A. J., "Inserts selection for intermittent turning of magnesium pieces," Applied Mechanics and Materials, Vol. 217-219, pp. 1581-1591, 2012.
10. Park, C. W., Kwon, K. S., Kim, W. B., Min, B. K., Park, S. J., Sung, I. H., Yoon, Y. S., Lee, K. S., Lee, J. H., and Seok, J., "Energy consumption reduction technology in manufacturing - A selective review of policies, standards, and research," Int. J. Precis. Eng. Manuf., Vol. 10, No. 5, pp. 151-173, 2009.
11. Rubio, E. M., Villeta, M., Saá, A. J., and Carou, D., "Analysis of main optimization techniques in predicting surface roughness in metal cutting processes," Applied Mechanics and Materials, Vol. 217-219, pp. 2171-2182, 2012.
12. Zhang, T., Liu, Z. Q., Shi, Z. Y., and Xu, C. H., "Size effect on surface roughness in micro turning," Int. J. Precis. Eng. Manuf., Vol. 14, No. 3, pp. 345-349, 2013.
13. Kamguem, R., Tahan, S. A., and Songmene, V., "Evaluation of machined part surface roughness using image texture gradient factor," Int. J. Precis. Eng. Manuf., Vol. 14, No. 2, pp. 183-190, 2013.
14. Moola, M. R., Gorin, A., and Hossein, K. A., "Optimization of various cutting parameters on the surface roughness of the machinable glass ceramic with two flute square end mills of micro grain solid carbide," Int. J. Precis. Eng. Manuf., Vol. 13, No. 9, pp. 1549-1554, 2012.
15. Saini, S., Ahuja, I. S., and Sharma, V. S., "Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools," Int. J. Precis. Eng. Manuf., Vol. 13, No. 8, pp. 1295-1302, 2012.
16. Yang, R. T., Liao, H. T., Yang, Y. K., and Lin, S. S., "Modeling and optimization in precise boeing processes for aluminum alloy 6061T6 components," Int. J. Precis. Eng. Manuf., Vol. 13, No. 1, pp. 11-16, 2012.
17. Ramanujam, R., Muthukrishnan, N., and Raju, R., "Optimization of cutting parameters for turning Al-SiC(10p) MMC using ANOVA and grey relational analysis," Int. J. Precis. Eng. Manuf., Vol. 12, No. 4, pp. 651-656, 2011.
18. Raju, K. V. M. K., Janardhana, G. R., Kumar, P. N., and Rao, V. D. P., "Optimization of cutting conditions for surface roughness in CNC end milling," Int. J. Precis. Eng. Manuf., Vol. 12, No. 3, pp. 383-391, 2011.
19. Dogra1, M., Sharma, V. S., Sachdeva, A., Suri, N. M., and Dureja, J. S., "Tool wear, chip formation and workpiece surface issues in CBN hard turning: A review," Int. J. Precis. Eng. Manuf., Vol. 11, No. 2, pp. 341-358, 2010.
20. Uthayakumar, M., Prabhakaran, G., Aravindan, S., and Sivaprasad, J. V., "Precision machining of an aluminum alloy piston reinforced with a cast iron insert," Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 7-13, 2009.
21. Munawar, M., Chen, J. C. S., and Mufti, N. A., "Investigation of cutting parameters effect for minimization of sur face roughness in internal turning," Int. J. Precis. Eng. Manuf., Vol. 12, No. 1, pp. 121-127, 2011.
22. Lee, E. S., Hwang, J. S. C., Lee, T., and Won, J. K., "A Study on the characteristic of parameters by the response surface method in final wafer polishing," Int. J. Precis. Eng. Manuf., Vol. 10, No. 3, pp. 25-30, 2009.
23. Villeta, M., Rubio, E. M., Sáenz de Pipaón, J. M., and Sebastián, M. A., "Surface finish optimization of magnesium pieces obtained by dry turning based on Taguchi techniques and statistical tests," Mater. Manuf. Process., Vol. 26, No. 12, pp. 1503-1510, 2011.
24. Sáenz de Pipaón, J. M., Rubio, E. M., Villeta, M., and Sebastian, M. A., "Influence of cutting conditions and tool coatings on the surface finish of workpieces of magnesium obtained by dry turning," Proc. of Int. DAAAM., pp. 609-610, 2008.
25. Villeta, M., de Agustina, B., Sáenz de Pipaón, J. M., and Rubio, E. M., "Main methods of experimental design and statistical analysis as tools to carry out a sustainable experimentation in machining processes field," Proc. of IPROMS International Researchers Symposium, 2009.
26. Hwang, Y. K., Lee, C. M., and Park, S. H., "Evaluation of machinability according to the changes in machine tools and cooling lubrication environments and optimization of cutting conditions using Taguchi method," Int. J. Precis. Eng. Manuf., Vol. 10, No. 3, pp. 65-73, 2009.
27. Ross, P. J., "Taguchi techniques for quality engineering: loss function, orthogonal experiments, parameter and tolerance design," Mc-Graw Hill, 1996.
28. Taguchi, G., "System of experimental design, American Supplier Institute," 1987.
29. Montgomery, D. C., "Design and analysis of experiments," John Wiley & Sons, Inc., 2005.
30. Tönshoff, H. K. and Winkler, J., "The influence of tool coatings in machining of magnesium," Surf. Coat. Technol., Vol. 94-95, pp. 610-616, 1997.
31. 3, TiN and Ti (C, N) based CVD coatings on tool wear in machining metal matrix composites," Surf. Coat. Tech., Vol. 179, No. 2-3, pp. 349-355, 2004.
32. Inspektor, A., Bauer, C. E., and Oles, E. J., "Superhard coatings for metal cutting applications," Surf. Coat. Tech., Vol. 68-69, pp. 359-368, 1994.
33. Tönshoff, H. K., Mohlfeld, A., Gey, C., and Winkler, J., "Surface modification of cement carbide cutting tools for improved adhesion of diamond coatings," Surf. Coat. Tech., Vol. 108-109, No. 1-3, pp. 543-550, 1998.
34. Tönshoff, H. K., Mohlfeld, A., Gey, C., and Winkler, J., "Mechanical pretreatment for improved adhesion of diamond coatings," Surf. Coat. Tech., Vol. 116-119, No. 1-3, pp. 440-446, 1999.
35. SAS Institute Inc., "Statistical Analysis System software, version 9. 1 for Windows," 2004.