Experimental and finite element analysis of a coated diesel engine fueled by cashew nut shell liquid biodiesel

Experimental Thermal and Fluid Science

Volumn 53, Issue , 2014, Pages 259-268

  Vedharaj, S ^a   Vallinayagam, R ^a   Yang, W M ^a   Chou, S K ^a   Chua, K J E ^a   Lee, P S ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

FEA (finite element analysis); Performance; Piston; PSZ (partially stabilized zirconia); TBC (thermal barrier coating); Temperature; Thermal stress

Indexed keywords

BRAKE THERMAL EFFICIENCY; CASHEW NUT SHELL LIQUID; EXPERIMENTAL INVESTIGATIONS; INSULATING PROPERTIES; PARTIALLY STABILIZED ZIRCONIA; PERFORMANCE; TBC (THERMAL BARRIER COATING); THERMAL-STRESS ANALYSIS;

BIODIESEL; CARBON MONOXIDE; COATINGS; DIESEL ENGINES; ENGINES; FINITE ELEMENT METHOD; HEAT FLUX; HIGH TEMPERATURE APPLICATIONS; LIQUIDS; PISTONS; PLASMA SPRAYING; STRESS ANALYSIS; TEMPERATURE; THERMAL BARRIER COATINGS; THERMAL STRESS; ZIRCONIA;

ENGINE PISTONS;

EID: 84892512137     PISSN: 08941777     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.expthermflusci.2013.12.018     Document Type: Article

References (46)

1. Singh S., Singh D. Biodiesel production through the use of different sources and characterization of oils and their esters as the substitute of diesel: a review. Renew. Sustain. Energy Rev. 2010, 14:200-216.
2. Balat M., Balat H. A critical review of bio-diesel as a vehicular fuel. Energy Convers. Manage. 2008, 49:2727-2741.
3. Mani M., Subash C., Nagarajan G. Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil. Appl. Therm. Eng. 2009, 29:2738-2744.
4. H. Tajima, K. Takasaki, M. Nakashima, J. Yanagi, T. Takaishi, H. Ishida, S.-N. Osafune, Combustion of Used Lubricating Oil in a Diesel Engine, 2001.
5. Muralidharan K., Vasudevan D. Performance, emission and combustion characteristics of a variable compression ratio engine using methyl esters of waste cooking oil and diesel blends. Appl. Energy 2011, 88:3959-3968.
6. Mallikappa D., Reddy R.P., Murthy C.S. Performance and emission characteristics of double cylinder CI engine operated with cardanol bio fuel blends. Renew. Energy 2012, 38:150-154.
7. Velmurugan L.M. A performance and emission characteristics of a DI diesel engine fuelled with cashew nut shell liquid (CNSL)-diesel blends. World Acad. Sci. Eng. Technol. 2011, 58.
8. Jaichandar S., Annamalai K. Influences of re-entrant combustion chamber geometry on the performance of Pongamia biodiesel in a DI diesel engine. Energy 2012, 44:633-640.
9. Rajendra Prasath B., Tamilporai P., Shabir M.F. Analysis of combustion, performance and emission characteristics of low heat rejection engine using biodiesel. Int. J. Therm. Sci. 2010, 49:2483-2490.
10. Jindal S., Nandwana B., Rathore N., Vashistha V. Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl ester. Appl. Therm. Eng. 2010, 30:442-448.
11. 2) and mullite thermal barrier coatings on diesel engine components: effect of coatings on engine performance. Proc. Inst. Mech. Eng. Part C: J. Mech. Eng. Sci. 2000, 214:729-742.
12. Kumar Domakonda V., Kumar Puli R. Application of thermal barrier coatings in diesel engines: a review. Energy Power 2012, 2:9-17.
13. Haşimoǧlu C., Ciniviz M., Özsert I., Içingür Y., Parlak A., Sahir Salman M. Performance characteristics of a low heat rejection diesel engine operating with biodiesel. Renew. Energy 2008, 33:1709-1715.
14. Qian G., Nakamura T., Berndt C.C. Effects of thermal gradient and residual stresses on thermal barrier coating fracture. Mech. Mater. 1998, 27:91-110.
15. Cao X.Q., Vassen R., Stoever D. Ceramic materials for thermal barrier coatings. J. Eur. Ceram. Soc. 2004, 24:1-10.
16. T. Morel, S. Wahiduzzaman, E. Fort, D. Tree, Heat Transfer in a Cooled and an Insulated Diesel Engine, SAE Technical Paper 890572, 1989.
17. Lawrence P., Mathews P., Deepanraj B. Experimental investigation on performance and emission characteristics of low heat rejection diesel engine with ethanol as fuel. Am. J. Appl. Sci. 2011, 8:348-354.
18. A. Sathiyagnanam, C. Saravanan, S. Dhandapani, Effect of Thermal-Barrier Coating plus Fuel Additive for Reducing Emission from Di Diesel Engine, Lecture Notes in Engineering and Computer Science 2184, 2010.
19. W. Cheng, V. Wong, F. Gao, Heat Transfer Measurement Comparisons in Insulated and Non-Insulated Diesel Engines, SAE Technical Paper 890570, 1989.
20. D. Dickey, The Effect of Insulated Combustion Chamber Surfaces on Direct-Injected Diesel Engine Performance, Emissions and Combustion, SAE Technical Paper 890292, 1989.
21. K. Mendera, Effectiveness of plasma sprayed coatings for engine combustion chamber, SAE Technical Paper, 2000, 01-2982.
22. V.W. Wong, W. Bauer, R. Kamo, W. Bryzik, Assessment of thin thermal barrier coatings for IC engines, 1995.
23. Bhagat A., Jibhakate Y., Chimote K. Thermal analysis and optimization Of IC engine piston using finite element method. Gas 2012, 2:6207-6216.
24. Pierz P. Thermal barrier coating development for diesel engine aluminum pistons. Surf. Coat. Technol. 1993, 61:60-66.
25. Buyukkaya E., Cerit M. Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method. Surf. Coat. Technol. 2007, 202:398-402.
26. Reddy R., Murthy C.S.N. Performance and emission characteristics studies on stationary diesel engines operated with cardanol biofuel blends. Int. J. Renew. Energy Res. (IJRER) 2012, 2:295-299.
27. Das P., Ganesh A. Bio-oil from pyrolysis of cashew nut shell-a near fuel. Biomass Bioenergy 2003, 25:113-117.
28. Mallikappa D., Reddy R.P., Murthy C.S.N. Performance and emission characteristics of double cylinder CI engine operated with cardanol bio fuel blends. Renew. Energy 2012, 38:150-154.
29. Kasiraman G., Nagalingam B., Balakrishnan M. Performance, emission and combustion improvements in a direct injection diesel engine using cashew nut shell oil as fuel with camphor oil blending. Energy 2012.
30. Hejwowski T., Weroński A. The effect of thermal barrier coatings on diesel engine performance. Vacuum 2002, 65:427-432.
31. S. Furuhama, Y. Enomoto, Heat Transfer into Ceramic Combustion Wall of Internal Combustion Engines, SAE Technical Paper 870153, 1987.
32. Holman J.P. Experimental Techniques for Engineers 2004, Tata McGraw Hill, New Delhi. seventh ed.
33. Aydin H. Combined effects of thermal barrier coating and blending with diesel fuel on usability of vegetable oils in diesel engines. Appl. Therm. Eng. 2012.
34. Hazar H. Effects of biodiesel on a low heat loss diesel engine. Renew. Energy 2009, 34:1533-1537.
35. Işcan B., Aydin H. Improving the usability of vegetable oils as a fuel in a low heat rejection diesel engine. Fuel Process. Technol. 2012, 98:59-64.
36. Karthikeyan R., Mahalakshmi N. Performance and emission characteristics of a turpentine-diesel dual fuel engine. Energy 2007, 32:1202-1209.
37. Heywood J.B. Internal Combustion Engine Fundamentals 1988, McGraw Hill, New York.
38. Arpa O., Yumrutaş R., Kaşka Ö. Desulfurization of diesel-like fuel produced from waste lubrication oil and its utilization on engine performance and exhaust emission. Appl. Therm. Eng. 2013, 58:374-381.
39. Mancaruso E., Vaglieco B. Optical investigation of the combustion behaviour inside the engine operating in HCCI mode and using alternative diesel fuel. Exp. Thermal Fluid Sci. 2010, 34:346-351.
40. Goldsworthy L. Combustion behaviour of a heavy duty common rail marine diesel engine fumigated with propane. Exp. Thermal Fluid Sci. 2012, 42:93-106.
41. Sarin A. Biodiesel: Production and Properties 2012, Royal Society of Chemistry.
42. Hazar H. Cotton methyl ester usage in a diesel engine equipped with insulated combustion chamber. Appl. Energy 2010, 87:134-140.
43. MohamedMusthafa M., Sivapirakasam S., Udayakumar M. Comparative studies on fly ash coated low heat rejection diesel engine on performance and emission characteristics fueled by rice bran and pongamia methyl ester and their blend with diesel. Energy 2011, 36:2343-2351.
44. Rakopoulos C., Mavropoulos G. Components heat transfer studies in a low heat rejection DI diesel engine using a hybrid thermostructural finite element model. Appl. Therm. Eng. 1998, 18:301-316.
45. Levy A., Macadam S. The behavior of ceramic thermal barrier coatings on diesel engine combustion zone components. Surf. Coat. Technol. 1987, 30:51-61.
46. 2/NiCoCrAlY coatings. Mater. Des. 2002, 23:641-644.