Condition-based maintenance of high-voltage machines-a practical application to electrical insulation

IEEE Electrical Insulation Magazine

Volumn 30, Issue 1, 2014, Pages 32-38

  Trnka, Pavel ^a   Sirucek, Martin ^a   Svoboda, Michal ^a   Soucek, Jakub ^a  

^a UNIVERSITY OF WEST BOHEMIA   (Czech Republic)

Author keywords

aging model; condition based maintenance; electric insulation; remaining life calculation

Indexed keywords

ACCELERATED AGING; AGING MODELS; CONDITION BASED MAINTENANCE; DIAGNOSTIC SYSTEMS; ELECTRICAL ENERGY; ON-LINE DIAGNOSIS; ONLINE DIAGNOSTIC SYSTEMS; TIME BASED MAINTENANCE;

ELECTRIC EQUIPMENT; ELECTRIC INSULATION; POWER TRANSFORMERS;

REPAIR;

EID: 84892409230     PISSN: 08837554     EISSN: None     Source Type: Journal    
DOI: 10.1109/MEI.2014.6701105     Document Type: Article

References (33)

1. PowerTransformer-Part 7: Loading Guide for Oil-Immersed Power Transformers, IEC 60076-7, Dec. 2005.
2. G. Stone, E. Boulter, I. Culbert, and H. Dhirani, "Design, evaluation, aging, testing, and repair," in Electrical Insulation for Rotating Machines. Wiley-IEEE Press, Jan. 2004.
3. G. C. Montanari, "A comparative investigation of electrothermal endurance models for insulating materials and systems characterization," IEEE Electr. Insul. Mag., vol. 13, no. 3, pp. 13-25, May-Jun. 1997. (Pubitemid 127563926)
4. S. Jiancheng, Y. Bo, and X. Hengkun, "New estimating techniques for multi-stress aging test of large generator stator winding insulation," in Conference on Properties and Applications of Dielectric Materials, vol. 2, 2000, pp. 951-956.
5. S. R. Chalise, S. Grzybowski, and C. D. Taylor, "Accelerated electrical degradation of machine winding insulation," in Electric Ship Technologies Symposium, Apr. 2009, pp. 533-538.
6. T. S. Ramu, "On the estimation of life of power apparatus insulation under combined electrical and thermal stress," IEEE Trans. Electr. Insul., vol. 20, no. 1, pp. 70-78, Feb. 1985. (Pubitemid 15451907)
7. R. J. Van Brunt, "Stochastic properties of partial-discharge phenomena," in IEEE Trans. Electr. Insul., vol. 26, no. 5, pp. 902-948, Oct. 1991.
8. G. C. Montanari, G. Mazzanti, and L. Simoni, "Progress in electrothermal life modeling of electrical insulation during the last decades," IEEE Trans. Dielectr. Electr. Insul., vol. 9, no. 5, pp. 730-745, Oct. 2002. (Pubitemid 35458110)
9. V. M. Montsinger, "Loading transformers by temperature," Trans. Am. Inst. Electr. Eng., vol. 49, no. 2, pp. 776-790, Apr. 1930.
10. J. Zhidong, "The degradation assessment of epoxy/mica insulation under multi-stresses aging," IEEE Trans. Dielectr. Electr. Insul., vol. 13, no. 2, pp. 415-422, Apr. 2006.
11. J.-P. Crine and E. David. "Influence of mechanical stresses on some electrical properties of polymers," in Conference on Electrical Insulation and Dielectric Phenomena, 2005, pp. 71-74. (Pubitemid 46016139)
12. J.-P. Crine, J.-L. Parpal, and C. Dang, "A new approach to the electric aging of dielectrics," in Conference on Electrical Insulation and Dielectric Phenomena, Oct.-Nov. 1989, pp. 161-167. (Pubitemid 20712288)
13. J.-L. Parpal, J.-P. Crine, and C. Dang, "Electrical aging of extruded dielectric cables, A physical model," IEEE Trans. Dielectr. Electr. Insul., vol. 4, no. 3, pp. 197-209, Apr. 1997. (Pubitemid 127768575)
14. L. Simoni, G. Mazzanti, G. C. Montanari, and L. Lefebre, "A general multi-stress life model for insulating materials with or without evidence for thresholds," IEEE Trans. Electr. Insul., vol. 28, no. 3, pp. 349-364, Jun. 1993. (Pubitemid 23712017)
15. D. J. Groebel, A. Mettas, and F.-B. Sun; "Determination and interpretation of activation energy using accelerated-test data," in Reliability and Maintainability Symposium, 2001, pp. 58-63. (Pubitemid 32470612)
16. IEEE Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings, IEEE Std C57.119-2001, Mar. 2002.
17. IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators, IEEE Std C57.91-2011 (Revision of IEEE Std C57.91-1995), pp. 1-123, Mar. 2012.
18. A. Elmoudi, M. Lehtonen, and H. Nordman, "Thermal model for power transformers dynamic loading," in IEEE Conference Symposium on Electrical Insulation, Jun. 2006, pp. 214-217.
19. P. A. A. F. Wouters, A. van Schijndel, and J. M. Wetzer, "Remaining lifetime modeling of power transformers: Individual assets and fleets," IEEE Electr. Insul. Mag., vol. 27, no. 3, pp. 45-51, May-Jun. 2011.
20. A. Al-Nadabi and H. Al-Riyami, "Design a simulation model to estimate the hot spot temperature in power transformers," in Conference on Systems, Signals and Devices, Mar. 2009, pp. 1-5.
21. M. T. Askari, M. Z. A. A. Kadir, and J. Jasni, "A numerical method for calculating the loss of life of power transformers," in Conference on Power Engineering and Optimization, Jun. 2012, pp. 29-34.
22. T. Weekes, T. Molinski, Xin Li, and G. Swift, "Risk assessment using transformer loss of life data," IEEE Electr. Insul. Mag., vol. 20, no. 2, pp. 27-31, Mar.-Apr. 2004.
23. Y. Li, M. Tang, J. Deng, G. Zhang, and S. Wang, "An approach to aging assessment of power transformer based on multi-parameters," in IEEE Conference on Condition Monitoring and Diagnosis, Sep. 2012, pp. 357-360.
24. D. Zhou, C. Li, and Z. Wang, "Power transformer lifetime modeling," in IEEE Conference on Prognostics and System Health Management (PHM), May 2012, pp. 1-7.
25. B. Gorgan, P. V. Notingher, J. M. Wetzer, H. F. A. Verhaart, P. A. A. F. Wouters, A. van Schijndel, and G. Tanasescu, "Calculation of the remaining lifetime of power transformers paper insulation," in Conference on Optimization of Electrical and Electronic Equipment (OPTIM), May 2012, pp. 293-300.
26. A. S. Azizov, A. M. Andreev, A. M. Kostel'ov, and Y. A. Polonskii, "The improvement of the electrical insulation of high voltage electrical machines," Russian Electrical Engineering, vol. 78, pp. 102-112, Mar. 2007.
27. A. Anton, "New developments in resin rich insulating systems for high voltage rotating machines," in Conference on Electrical Insulation and Electrical Manufacturing and Coil Winding, Sep. 1997, pp. 607-618.
28. K. Younsi, P. Neti, M. Shah, J. Y. Zhou, J. Krahn, K. Weeber, and C. D. Whitefield, "On-line capacitance and dissipation factor monitoring of AC stator insulation," IEEE Trans. Dielectr. Electr. Insul., vol. 17, no. 5, pp. 1441-1452, Oct. 2010.
29. S. B. Lee, K. Younsi, and G. B. Kliman, "An on-line technique for monitoring the insulation condition of AC machine stator windings," in IEEE Conference on Electric Machines and Drives, May 2005, pp. 286-294. (Pubitemid 44461320)
30. A. C. Gj?de, "Multifactor ageing models-Origin and similarities," IEEE Electr. Insul. Mag., vol. 13, no. 1, 1997.
31. G. C. Montanari and M. Cacciari, "A probabilistic life model for insulating materials showing electrical thresholds," IEEE Trans. Electr. Insul., vol. 24, no. 1, pp. 127-134, Feb. 1989
32. Electrical Insulating Materials-Thermal Endurance Properties, IEC 60216, Jan. 2006.
33. Recommended Methods for the Determination of the Permittivity and Dielectric Dissipation Factor of Electrical Insulating Materials at Power, Audio and Radio Frequencies Including Metre Wavelengths, IEC 60250, Jan. 1969.