Meshless methods in solid mechanics

Meshless Methods in Solid Mechanics

Volumn , Issue , 2006, Pages 1-200

  Chen, Youping ^a   Lee, James D ^a   Eskandarian, Azim ^a  

^a George Washington University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892277707     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/0-387-33368-1     Document Type: Book

References (201)

1. Cochran,W. (1973) The Dynamics of Atoms in Crystals, Edward Arnold Limited, London.
2. Devonshire, A. F. (1954) "Theory of ferroelectrics," Phil. Mag. Suppl. (Adv. Phys.) 3(10), 85-130.
3. Ginzburg, V. L. (2001) "Phase transitions in ferroelectrics: Some historical remarks," in The 10th International Conference on Ferroelectricity, Phys.-Usp. 44(10), 1037-1043.
4. Haile, J. M. (1992) Molecular Dynamics Simulation, John Wiley & Sons, New York.
5. Hohenberg, H. and Kohn, W. (1964) "Inhomogeneous gas," Phys. Rev. 136, B864-B871.
6. Hoover, W. G. (1986) Molecular Dynamics, Springer-Verlag, Berlin.
7. Hoover, W. G. (1991) Computational Statistical Mechanics, Elsevier, Amsterdam.
8. Huang, K. (1967) Statistical Mechanics, John Wiley & Sons, New York.
9. Kittel, C. (1967) Introduction to Solid State Physics, John Wiley & Sons, New York.
10. Kohn,W. and Sham, L. J. (1965) "Self-consistant equations including exchange and correlation effect," Phys. Rev. 140, A1133-A1138.
11. Parr, R.G. andYang,W. (1989) Density Functional Theory of Atoms and Molecules, Oxford University Press, New York.
12. Tolman, R. C. (1962) The Principle of Statistical Mechanics, Oxford University Press, London.
13. Yu, P.Y. and Cardona, M. (2001) Fundamentals of Semiconductors, Springer-Verlag, Berlin.
14. Collman, B. D. and Noll, W. (1963) "The thermodynamics of elastic materials with heat conduction," Arch. Ration. Mech. Anal. 13, 167.
15. Eringen, A. C. (1989) Mechanics of Continua, Robert E. Krieger Publishing Company, Melbourne.
16. Eringen, A. C. (1999) Microcontinuum Field Theories I: Foundations and Solids, Springer-Verlag, New York.
17. Fung, Y. C. and Tong, P. (2001) Classical and Computational Solid Mechanics, World Scientific Publishing Company, Singapore.
18. Truesdell, C. and Noll, W. (1965) The non-linear field theories of mechanics, Handbuck der Physik, ed. S. Flugge, Vol. III/3 Springer-Verlag, Berlin.
19. Truesdell, C. and Toupin, R. (1960) The classical field theory, Handbuck der Physik, ed. S. Flugge, Vol. III/1 Springer-Verlag, Berlin.
20. Wang, C. C. (1970) "A new representation theorem for isotropic functions, Part I and Part II," Arch. Ration. Mech. Anal. 36, 166-223.
21. Wang, C. C. (1971) "Corrigendum to representations for isotropic functions," Arch. Ration. Mech. Anal. 43, 392-395.
22. Bathe, K. J. (1996) Finite Element Procedures, Prentice-Hall, Englewood Cliffs.
23. Belytschko, T., Liu, W. K. and Moran, B. (2001) Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, Chichester, England.
24. Cook, R. D., Malkus, D. S. and Plesha, M. E. (1989) Concepts and Applications of Finite Element Analysis, John Wiley & Sons, New York.
25. Fung, Y. C. and Tong, P. (2001) Classical and Computational Solid Mechanics, World Scientific Publishing Company, Singapore.
26. Grandin, H., Jr. (1991) Fundamentals of the Finite Element Method, Waveland Press, Prospect Heights.
27. Logan, D. L. (1992) A First Course in the Finite Element Method, PWS-KENT Publishing Company, Boston.
28. Reddy, J. N. (1993) An Introduction to the Finite Element Method, McGraw-Hill, Boston.
29. Washizu, K. (1975) Variational Methods in Elasticity and Plasticity, Pergamon Press, Oxford.
30. Zienkiewicz, O. Z. (1983) The Finite Element Method, Mc-Graw-Hill, London.
31. Zienkiewicz, O. C. and Taylor, R. L. (1989) The Finite Element Method: Volume 1: Basic Formulation and Linear Problems, McGraw-Hill, London.
32. Zienkiewicz, O. C. and Taylor, R. L. (1991) The Finite Element Method: Volume 2: Solid and Fluid Mechanics Dynamics and Non-linearity, McGraw-Hill, London.
33. Aifantis, E. C. (1999) "Strain gradient interpretation of size effect," Int. J. Fract. 95, 299-314.
34. Aluru, N. R. (1999) "A reproducing kernel particle method for meshless analysis of microelectromechanical systems," Comput. Mech. 23, 324-338.
35. Atluri, S. N. and Zhu, T. (2000) "New concept in meshless methods,"Int. J. Numer. Methods Eng. 47, 537-556.
36. Attaway, S. W., Heimsten, M. W. and Swegle, J. W. (1994) "Coupling of smooth particle hydrodynamics with the finite element method," Nucl. Eng. Des. 150, 199-205.
37. Babuska, I. and Melenk, J. M. (1995) "The partition of unity finite element method," Technique Report BN-1185, Institute for Physics, Science, and Technology, University of Maryland, Maryland.
38. Babuska, I. and Melenk, J. M. (1996) "The partition of unity finite element method: Basic theory and applications," Comput. Methods Appl. Mech. Eng. 139, 289-315.
39. Beissel, S. and Belytschko, T. (1996) "Nodal integration of the element-free Galerkin method," Comput. Methods Appl. Mech. Eng. 139, 49-74.
40. Belytschko, T., Lu, Y. Y. and Gu, L. (1994) "Element-free Galerkin methods," Int. J. Numer. Methods Eng.37, 229-256.
41. Belytschko, T., Organ, D. and Krongauz, Y. (1995) "A coupled finite element - Element free Galerkin method," Comput. Mech. 17, 186-195.
42. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M. and Krysl, P. (1996a) "Meshless methods: An overview and recent developments," Comput. Methods Appl. Mech. Eng. 139,3-47.
43. Belytschko, T., Krongauz, Y., Fleming, M., Organ, D. and Liu, W. K. (1996b) "Smoothing and accelerated computations in the element free Galerkin method," J. Comput. Appl. Math. 74, 111-126.
44. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M. and Krysl, P. (1996c) "Meshless methods: An overview and recent developments," Comput. Methods Appl. Mech. Eng. 139, 3-47.
45. Belytschko, T., Krysl, P. and Krongauz, Y. (1997) "A three-dimensional explicit elementfree Galerkin method,"Int. J. Numer. Methods Fluid 24, 1253-1270.
46. Belytschko, T., Guo, Y., Liu, W. K. and Xiao, S. (2000) "A unified stability analysis of meshless particle methods," Int. J. Numer. Methods Eng. 48, 1359-1400.
47. Braun, J. and Sambridge, M. (1995) "A numerical method for solving partial differential equations on highly irregular evolving grids," Nature 376,655-660.
48. Chen, J., Pan, C., Wu, C. and Liu, W. K. (1996) "Reproducing kernel particle methods for large deformation analysis of non-linear structures," Comput. Methods Appl. Mech. Eng. 139, 195-227.
49. Chen, J., Wu, C., Yoon, S. and You, Y. (2001a) "A stabilized conforming nodal integration for Galerkin mesh-free methods," Int. J. Numer. Methods Eng. 50, 435-466.
50. Chen, Y., Lee, J. D. and Eskandarian, A. (2001b) "Meshless particle method for nonlocal continua," in Proceedings of International Conference of Computational Engineering Science, Puerto Vallarta, Mexico.
51. Chen, J., Wu, C. and Belytschko, T. (2002a) "Regularization of material instabilities by meshfree approximations with intrinsic length scales," Int. J. Numer. Methods Eng. 47, 1303-1322.
52. Chen, Y., Lee, J. D. and Eskandarian, A. (2002b) "Dynamic meshless method applied to nonlocal cracked problems," Theor. Appl. Fract. Mech. 38, 293-300.
53. Chu, Y. and Moran, B. (1995) "A computational model for nucleation of solid-solid phase transformation," Model. Simul. Mater. Sci. Eng. 3, 455-471.
54. Cueto, E., Doblare, M. and Gracia, L. (2000) "Imposing essential boundary conditions in natural elment method by means of density-scaled α-shapes," Int. J. Numer. Methods Eng. 48, 519-546.
55. Donning, B. M. and Liu,W. K. (1998) "Meshless methods for shear-deformable beams and plates," Comput. Methods Appl. Mech. Eng. 152, 47-71.
56. Duarte, C. A. M. and Oden, J. T. (1995) "Hp clouds - A meshless method to solve boundary value problems," TICAM Report, 95-05.
57. Duarte, C. A. M. and Oden, J. T. (1996) "An h-p adaptive method using clouds," Comput. Methods Appl. Mech. Eng. 139, 237-262.
58. Dyka, C. (1994) "Addressing tensile instability in SPH methods," Technical Report NRL/MR/6384, NRL.
59. Dyka, C., Randles, P. and Ingel, R. (1997) "Stress points for tension instability in SPH," Int. J. Numer. Methods Eng. 40, 2325-2341.
60. Edelen, D. G. B. (1969) "Protoelastic bodies with large deformation," Arch. Ration. Mech. Anal. 34, 283.
61. Edelen, D. G. B. and Laws, N. (1971) "On the thermodynamics of systems with nonlocality," Arch. Ration. Mech. Anal. 43, 24-35.
62. Eringen, A. C. (1966) "A unified theory of thermomechnical materials," Int. J. Eng. Sci. 4, 179.
63. Eringen, A. C. and Edelen, D. G. B. (1972) "On nonlocal elasticity," Int. J. Eng. Sci. 10, 233-248.
64. Fleck, N. A., Muller, G. M., Ashby, M. F. and Hutchinson, J. W. (1994) "Strain gradient plasticity: Theory and experiment," Acta Metall. Mater. 42, 475-487.
65. Gingold, R. A. and Monaghan, J. J. (1977) "Smoothed particle hydrodynamics: Theory and application to non-spherical stars," Mon. Not. R. Astron. Soc. 181, 375-387.
66. Grindeanu, I., Chang, K. H., Choi, K. K. and Chen, J. (1998) "Design sensitivity analysis of Hyperelastic structures using a meshless method," AIAA J. 36, 618-627.
67. Grindeanu, I., Choi, K. K. and Chen, J. (1999) "Shape design optimization of hyperelastic structures using a meshless method," AIAA J. 37, 990-997.
68. Hoover,W. G. and Hoover, C. G. (1993) "Smoothed-particle hydrodynamics and nonequalibrium molecular dynamics", Advanced Computational Methods for Material Modeling, AMD-Vol. 180/PVP-Vol. 268, ASME, New York, 231-242.
69. Hulbert, G. M. (1996) "Application of reproducing kernel particle methods in electromagnetics," Comput. Methods Appl. Mech. Eng. 139, 229-235.
70. Johnson, G. R. (1994) "Linking Lagrangian particle method to standard finite element method for high velocity impact computations," Nucl. Eng. Des. 150, 265-274.
71. Johnson, G. R. and Beissel, S. R. (1996) "Normalized smoothing functions for SPH impact computations," Int. J. Numer. Methods Eng. 39, 2725-2741.
72. Jun, S., Liu,W. K. and Belytschko, T. (1998) "Explicit reproducing kernel particle methods for large deformation problems," Int. J. Numer. Methods Eng. 41, 137-166.
73. Kim, N. H., Choi, K. K., Chen, J. S. and Park, Y. H. (2000) "Meshless shape design sensitivity analysis and optimization for contact problem with friction," Comput. Mech. 25, 157-168.
74. Krongauz, Y. and Belytschko, T. (1997) "Consistent pseudo-derivatives in meshless methods," Comput. Methods Appl. Mech. Eng. 146, 371-386.
75. Krongauz, Y. and Belytschko, T. (1998) "EFG approximation with discontinuous derivatives," Int. J. Numer. Methods Eng. 41, 1215-1233.
76. Krysl, P. and Belytschko, T. (1996a) "Analysis of thin shells by the element-free Galerkin method," Int. J. Solids Struct. 33, 3057-3080.
77. Krysl, P. and Belytschko, T. (1996b) "Analysis of thin palates by element free Galerkin methods, plates," Comput. Mech. 17, 26-35.
78. Krysl, P. and Belytschko, T. (1996c) "Analysis of thin shells by element free Galerkin methods, plates," Int. J. Solids Struct. 33, 3057-3080.
79. Krysl, P. and Belytschko, T. (1997) "Element-free Galerkin method: Convergence of the continuous and discontinuous shape functions," Comput. Methods Appl. Mech. Eng. 148, 257-277.
80. Krysl, P. and Belytschko, T. (1999) "The element free Galerkin method for dynamic propagation of arbitrary 3-D cracks," Int. J. Numer. Methods Eng. 44, 767-800.
81. Krysl, P. and Belytschko, T. (2000) "An efficient linear-precision partition of unity basis for unstructured meshless methods," Commun. Numer. Methods Eng. 16, 239-255.
82. Lancaster, P. and Salkauskas, K. (1981) "Surface generated by moving least squares methods," Math. Comput. 37, 141-158.
83. Li, S. and Liu, W. K. (1996) "Moving least-square reproducing kernel method Part II: Fourier analysis," Comput. Methods Appl. Mech. Eng. 139, 159-193.
84. Li, S. and Liu,W. K. (2000) "Numerical simulations of strain localization in inelastic solids using mesh-free methods," Int. J. Numer. Methods Eng. 48, 1285-1309.
85. Li, S., Hao, W. and Liu, W. K. (2000) "Numerical simulations of large deformation of thin shell structures using meshfree methods," Comput. Mech. 25, 102-116.
86. Liszka,T. and Orkisz, J. (1980) "The finite difference method for arbitrary meshes," Comput. Struct. 5, 45-58.
87. Liszka, T., Duarte, C. A. M. and Tworzydlo, W. W. (1996) "hp-Meshless cloud method," Comput. Methods Appl. Mech. Eng. 139, 263-288.
88. Liu, W. K. and Chen, Y. (1995) "Wavelet and multiple scale reproducing kernel methods," Int. J. Numer. Methods Fluid 21, 901-931.
89. Liu,W. K., Chen, Y. and Uras, R. A. (1995a) "Enrichment of the finite element method with the reproducing kernel particle method", Current Topics in Computational Mechanics, ed. J. F. Cory, Jr. and J. L. Gordon, PVP-Vol. 305, ASME, New York, 253-258.
90. Liu,W. K., Jun, S. and Zhang, Y. F. (1995b) "Reproducing kernel particle methods," Int. J. Numer. Methods Fluid 20, 1081-1106.
91. Liu,W. K., Chen, Y., Chang, C. T. and Belytschko, T. (1996a) "Advances in multiple scale kernel particle methods," Comput. Mech. 18, 73-111.
92. Liu, W. K., Chen, Y., Uras, R. A. and Chang, C. T. (1996b) "Generalized multiple scale reproducing kernel particle methods," Comput. Methods Appl. Mech. Eng. 139, 91-157.
93. Liu, W. K., Li, S. and Belytschko, T. (1997) "Moving least-square reproducing kernel methods (I) Methodology and convergence," Comput. Methods Appl. Mech. Eng. 143, 113-154.
94. Liu,W. K., Hao, S., Belytschko, T., Li, S. and Chang, C. (2000) "Multi-scale methods," Int. J. Numer. Methods Eng. 47, 1343-1361.
95. Lu, Y. Y., Belytschko, T. and Gu, L. (1994) "A new implementation of the element free Galerkin," Comput. Methods Appl. Mech. Eng. 113, 397-414.
96. Lucy, L. B. (1977) "A numerical approach to the testing of the fission hypothesis," Astron. J. 8(12), 1013-1024.
97. Monaghan, J. J. (1982) "Why particle methods work," SIAM J. Sci. Stat. Comput. 3(4), 422.
98. Monaghan, J. J. (1988) "An introduction to SPH," Comput. Phys. Commun. 48, 89-96.
99. Monaghan, J. J. (1992) "Smooth particle hydrodynamics," Annu. Rev. Astron. Astrophys. 30, 543-574.
100. Nayroles, B., Touzot, G. and Villon, P. (1992) "Generalizing the finite element method: Diffuse approximation and diffuse elements," Comput. Mech. 10, 307-318.
101. Oden, J. T., Duarte, C. A. M. and Zienkiewicz, O. C. (1998) "A new cloud-based hp finite element method," Comput. Methods Appl. Mech. Eng. 153, 117-126.
102. Onate, E., Idelsohn, S., Zienkiewicz, O. C. and Taylor, R. L. (1996a) "Finite point method in computational mechanics. Applications to convective transport and fluid flow," Int. J. Numer. Methods Eng. 39, 3839-3866.
103. Onate, E., Idelsohn, S., Zienkiewicz, O. C., Taylor, R. L. and Sacco, C. (1996b) "Stabilized finite point method for analysis of fluid mechanics problems," Comput. Methods Appl. Mech. Eng. 139, 315-346.
104. Ponthot, J. P. and Belytschko, T. (1998) "Arbitrary Lagrangian-Eulerian formulation for element-free Galerkin method," Comput. Methods Appl. Mech. Eng. 152, 19-46.
105. Qian, S. and Weiss, J. (1993) "Wavelet and the numerical solution of partial differential equations," J. Comput. Phys. 106, 155.
106. Randles, P. and Libersky, L. (1996) "Smoothed particle hydrodynamics: Some recent improvements and applications," Comput. Methods Appl. Mech. Eng. 139, 375-408.
107. Randles, P., Libersky, L. and Petschek, A. (1999) "On neighbors, derivatives, and viscosity in particle codes," in Proceedings of ECCM Conference, Munich, Germany, 31 August to 3 September 1999.
108. Schwer, L. E., Gerlach, C. and Belystchko, T. (2000) "Element-free Galerkin simulations of concrete failure in dynamic uniaxial tension test", J. Eng. Mech. 126(5), 443-454.
109. Senturia, S., Aluru, N. and White, J. (1997) "Simulating the behavior of MEMS devices: Computational methods and needs," IEEE Comput. Sci. Eng. 4(1), 30-43.
110. Sibson, R. (1981) "A brief description of natural neighbor interpolationts," in Interpreting Multivariate Data, ed. V. Barnett, John Wiley & Sons, Chichester, England, pp. 21-36.
111. Sukumar, N. and Moran, B. (July, 1999) "C1 natural neighbor interpolant for partial differential equations," Numer. Methods Partial Differ. Equations 15(4), 417-447.
112. Sukumar, N., Moran, B. and Belytschko, T. (1998) "The natural element method in solid mechanics," Int. J. Numer. Methods Eng. 43, 839-887.
113. Sukumar, N., Moran, B., Semenov, Y. and Belikov, V. V. (2001) "Natural neighbor Galerkin methods," Int. J. Numer. Methods Eng. 50(1), 1-27.
114. Sulsky, D., Chen, Z. and Schhreyer, H. L. (1992) "The application of a material-spatial numerical method to penetration", NewMethods in Transient Analysis, eds. P. Smolinski, W. K. Liu, G. Hulbert and K. Tamma, AMD-Vol. 143/PVP-Vol. 246, ASME, New York, 91-102.
115. Swegle, J. W., Hicks, D. L. and Attaway, S. W. (1995) "Smoothed particle hydrodynamics stability analysis," J. Comput. Phys. 116, 123-134.
116. Traversoni, L. (1994) "Natural neighbor finite elements", International Conference on Hydraulic Engineering Software, Hydrosoft Proceedings, Vol. 2, 291-297, Computational Mechanics Publications, London.
117. Wagner, G. J. and Liu,W. K. (2000) "Application of essential boundary condition in meshfree methods: A corrected collocation method," Int. J. Numer. Methods Eng. 47, 1367-1379.
118. Yagawa, G. and Furukawa, T. (2000) "Recent development of free mesh method," Int. J. Numer. Methods Eng. 47, 1419-1443.
119. Yagawa, G. and Yamada, T. (1996) "A new meshless finite element method," Int. J. Comput. Mech. 18, 383-386.
120. Zhu, T. (1999) "A new meshless regular local boundary integral equation (MRLBIE) approach," Int. J. Numer. Methods Eng. 46, 1237-1252.
121. Atluri, S. N. and Zhu, T. (2000) "Newconcept in meshless methods," Int. J. Numer. Methods Eng. 47, 537-556.
122. Beissel, S. and Belytschko, T. (1996) "Nodal integration of the element-free Galerkin method," Comput. Methods Appl. Mech. Eng. 139, 49-74.
123. Belytschko, T., Lu, Y. Y. and Gu, L. (1994) "Element-free Galerkin methods," Int. J. Numer. Methods Eng. 37, 229-256.
124. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M. and Krysl, P. (1996) "Meshless methods: An overview and recent developments," Comput. Methods Appl. Mech. Eng. 139, 3-47.
125. Belytschko, T., Krysl, P. and Krongauz, Y. (1997) "A three-dimensional explicit elementfree Galerkin method," Int. J. Numer. Methods Fluid 24, 1253-1270.
126. Belytschko, T., Guo, Y., Liu, W. K. and Xiao, S. (2000) "A unified stability analysis of meshless particle methods," Int. J. Numer. Methods Eng. 48, 1359-1400.
127. Chen, Y. P., Lee, J. D. and Eskandarian, A. (2002) "Dynamic meshless method applied to nonlocal crack problems," Theor. Appl. Fract. Mech. 38, 293-300.
128. Krysl, P. and Belytschko, T. (1997) "Element-free Galerkin method: Convergence of the continuous and discontinuous shape functions," Comput. Methods Appl. Mech. Eng. 148, 257-277.
129. Monaghan, J. J. (1992) "Smooth particle hydrodynamics," Annu. Rev. Astron. Astrophys. 30, 543-574.
130. Bathe, K. J. (1982) Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood Cliffs.
131. Bathe, K. J. (1996) Finite Element Procedures, Prentice-Hall, Englewood Cliffs.
132. Belytschko, T., Liu, W. K. and Moran, B. (2001) Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, Chichester, England.
133. Casal, P. (1978) "Interpretation of the rice integral in continuum mechanics," Lett. Appl. Eng. Sci. 16, 335-347.
134. Chen, Y. P. and Lee, J. D. (2005) "Material force for dynamic crack propagation in multiphase micromorphic materials", Theor. Appl. Fract. Mech. 43, 335-341.
135. Eshelby, J. D. (1951) "The force on an elastic singularity", Phil. Trans. R. Soc. Lond. A244, 87-112.
136. Hestenes, M. R. and Stiefel, E. (1952) "Methods of conjugate gradients for solving linear systems," J. Res. Natl Bureau Stand. 49, 409-436.
137. Houbolt, J. C. (1950) "A recurrence matrix solution for the dynamic response of elastic aircraft," J. Aeronaut. Sci. 17, 540-550.
138. Lee, J. D., Chen, Y. and Yin, S. W. (2004) "Material forces in micromorphic fracture mechanics", Journal of the Chinese Institute of Engineers 27(6), 889-896.
139. Lee, J. D. and Chen, Y. (2005) "Material forces in micromorphic thermoelastic solids", Philosophical Magazine 85(33-35), 3897-3910.
140. Maugin, G. A. (1992a) Thermomechanics of Plasticity and Fracture, Cambridge University Press, United Kingdom.
141. Maugin, G. A. (1992b) "Application of an energy-momentum tensor in nonlinear elastodynamics: Pseudomomentum and Eshelby stress in solitonic elastic systems," J. Mech. Phys. Solids 40, 1543-1558.
142. Maugin, G. A. (1993) Material Inhomogeneities in Elasticity, Chapman & Hall, London.
143. Maugin, G. A. (1995) "Material forces: Concepts and applications," Appl. Mech. Rev. 48, 213-245.
144. Newmark, N. M. (1959) "A methods of computation for structural dynamics," ASCE J. Eng. Mech. 85, 67-94.
145. Peach, M. O. and Koehler, J. S. (1950) "Forces exerted on dislocations and the stress field produced by them," Phys. Rev. II-80, 436-439.
146. Rice, J. R. (1968) "Path-independent integral and the approximate analysis of strain concentrations by notches and cracks," Trans. ASME J. Appl. Mech. 33, 379-385.
147. Sih, G. C. and Liebowitz, H. (1968) "Mathematical theories of brittle fracture," in Fracture II, ed. H. Liebowitz, Academic Press, New York.
148. Sneddon, I. N. and Lowengrub, M. (1969) Crack Problems in the Classical Theory of Elasticity, John Wiley & Sons, New York.
149. Tong, P. and Rossettos, J. N. (1977) Finite Element Method Basic Technique and Implementation, The MIT Press, Cambridge.
150. Varga, R. S. (1962) Matrix Iterative Analysis, Prentice-Hall, Englewood Cliffs.
151. Wilson, E. L., Farhoomard, I. and Bathe, K. J. (1973) "Nonlinear dynamic analysis of complex structures," Int. J. Earthq. Eng. Struct. Dyn. 1, 241-252.
152. Aifantis, E. C. (1999) "Strain gradient interpretation of size effect," Int. J. Fract. 95, 299-314.
153. Bazant, Z. P. and Lin, F. (1988) "Non-local yield limit degradation," Int. J. Numer. Methods Eng. 26, 1805-1823.
154. Bazant, Z. P. and Pijaudier-Cabot, G. (1988) "Nonlocal continuum damage, localization instability and convergence," J. Appl. Mech. 55, 287-293.
155. Belytschko, T., Lu, Y. Y. and Gu, L. (1994) "Element-free Galerkin methods," Int. J. Numer. Methods Eng. 37, 229-256.
156. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M., Krysl, P. (1996) "Meshless methods: An overview and recent developments," Comput. Methods Appl. Mech. Eng. 139, 3-47.
157. Belytschko, T., Guo, Y., Liu, W. K. and Xiao, S. P. (2000) "A unified stability analysis of meshless particle methods", Int. J. Numer. Methods Eng. 48, 1359-1400.
158. Charalambakis, N. and Aifantis, E. C. (1991) "Thermoviscoplastic shear instability and higher order strain gradients," Int. J. Eng. Sci. 29, 1639-1650.
159. Chen, J., Wu, C. and Belytschko, T. (2000) "Regularization of material instability by meshfree approximations with intrinsic scales," Int. J. Numer. Methods Eng. 47, 1303-1322.
160. Chen, Y. P., Lee, J. D. and Eskandarian, A. (2002) "Dynamic meshless method applied to nonlocal crack problems," Theor. Appl. Fract. Mech. 38, 293-300.
161. Edelen, D. G. B. (1969) "Protoelastic bodies with large deformation," Arch. Ration. Mech. Anal. 34, 283.
162. Edelen, D. G. B. and Laws, N. (1971) "On the thermodynamics of systems with nonlocality," Arch. Ration. Mech. Anal. 43, 24-35.
163. Edelen, D. G. B., Green, A. E. and Laws, N. (1971) "Nonlocal continuum mechanics," Arch. Ration. Mech. Anal. 43, 36-44.
164. Eringen, A. C. (1966) "A unified theory of thermomechanical materials," Int. J. Eng. Sci. 4, 179.
165. Eringen, A. C. (1976) "Nonlocal polar field theories," in Continuum Physics, ed. A. C. Eringen, Academic Press, New York.
166. Eringen, A. C., Edelen, D. G. B. (1972) "On nonlocal elasticity," Int. J. Eng. Sci. 10, 233-248.
167. Fleck, N. A. and Hutchinson, J.W. (1997) "Strain gradient plasticity," Adv. Appl. Mech. 13, 295-361.
168. Fleck, N. A., Muller, G. M., Ashby, M. F. and Hutchinson, J. W. (1994) "Strain gradient plasticity: Theory and experiment," Acta Metall. Mater. 42, 475-487.
169. Griffel, D. F. (1981) Applied Functional Analysis, John Wiley & Sons, New York.
170. Hoover, W. G. (1986) Molecular Dynamics, Springer-Verlag, Berlin Heidelberg.
171. Hoover,W. G. (1991) Computational Statistical Mechanics, Elsevier, Amsterdam; Oxford, New York, Tokyo.
172. Hoover,W. G. and Hoover, C. G. (1993) "Smoothed-particle hydrodynamics and nonequalibrium molecular dynamics", Advanced Computational Methods for Material Modeling, AMD-Vol. 180/PVP-Vol. 268, ASME, New York, 231-242.
173. Jun, S., Liu,W. K. and Belytschko, T. (1998) "Explicit reproducing kernel particle methods for large deformation problems," Int. J. Numer. Methods Eng. 41, 137-166.
174. Maki-Jaskari, M. (2001) "Simulations of strain relief at the crack tip in silicon," J. Phys. Condens. Matter 13, 1429-1437.
175. Masuda-Jindo, K., Tewary, V. K. and Thomson, R. (1991) "Atomic theory of fracture of brittle materials: Application to covalent semiconductors", Journal of Materials Research 6, 1553-1566.
176. Nilsson, C. (1998) "On nonlocal rate-independent plasticity," Int. J. Plast. 14(6), 551-575.
177. Rudd, R. E. and Broughton, J. Q. (1999) "Atomistic simulation of MEMSresonators through the coupling of length scales," J. Model. Simul. Microsys. 1, 26.
178. Sih, G. C. and Liebowitz, H. (1968) "Mathematical theories of brittle fracture," in Fracture II, ed. H. Liebowitz, Academic Press, New York.
179. Timoshenko, S. and Goodlier, J. N. (1969) Theory of Elasticity, McGraw-Hill, New York.
180. Belytschko, T., Lu, Y. T. and Gu, L. (1994) "Element-free Galerkin methods," Int. J. Numer. Methods Eng. 37, 229-256.
181. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M. and Krysl, P. (1996) "Meshless methods: An overview and recent developments," Comput. Methods Appl. Mech. Eng. 139, 3-47.
182. Belytschko, T., Guo, Y., Liu, W. K. and Xiao, S. P. (2000a) "A unified stability analysis of meshless particle methods," Int. J. Numer. Methods Eng. 48, 1359-1400.
183. Belytschko, T., Liu,W. K. and Moran, M. (2000b) Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons, Chichester, England.
184. Casey, J. (1998) "On elastic-thermo-plastic materials at finite deformations," Int. J. Plast. 14, 173-191.
185. Chen,Y., Eskandarian, A., Oskard, M. and Lee, J. D. (2004) "Meshless analysis of plasticity with application to crack growth problems", Theor. Appl. Fract. Mech. 41, 83-94.
186. Chen, Y., Lee, J. D. and Eskandarian, A. (2002) "Dynamic meshless method applied to nonlocal cracked problems," Theor. Appl. Fract. Mech. 38, 293-300.
187. Green, A. E. and Naghdi, P. M. (1965) "A general theory of an elastic-plastic continuum," Arch. Ration. Mech. Anal. 18, 251-281.
188. Herstein, J. N. (1964) Topics in Algebra, Ginn and Company, Waltham.
189. Hill, R. (1950) The Mathematical Theory of Plasticity, Oxford University Press, Oxford, United Kingdom.
190. Hungerford, T. W. (1974) Algebra, Springer-Verlag, New York.
191. Johnson, C. (1978) "On plasticity with hardening," J. Appl. Math. Anal. 62, 325-336.
192. Jun, S., Liu,W. K. and Belytschko, T. (1998) "Explicit reproducing kernel particle methods for large deformation problems," Int. J. Numer. Methods Eng. 41, 137-166.
193. Krieg, R. D. and Key, S. W. (1976) "Implementation of a time dependent plasticity theory into structural computer programs," in Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects, eds. J. A. Stricklin and K. J. Saczalski AMD-20, ASME, New York.
194. Lee, J. D. and Chen, Y. (2001) "A theory of thermo-visco-elastic- plastic materials: Thermomechanical coupling in simple shear," Theor. Appl. Fract. Mech. 35, 187-209.
195. Lee, J. D., Liebowitz, H. and Lee, K. Y. (1996) "The quest of a universal fracture law governing the process of slow crack growth," Eng. Fract. Mech. 55, 61-83.
196. Lee, K. Y., Liebowitz, H. and Lee, J. D. (1997) "Finite element analysis of the slow crack growth process in mixed mode fracture," Eng. Fract. Mech. 56, 551-577.
197. Lubliner, J. (1984) "Amaximum-dissipation principle in generalized plasticity," Acta Mech. 52, 225-237.
198. Lubliner, J. (1986) "Normality rules in large-deformation plasticity," Mech. Mater. 5, 29-34.
199. Moreau, J. J. (1976) "Application of convex analysis to the treatment of elastoplastic systems," in Applications of Methods of Functional Analysis to Problems in Mechanics, eds. P. Germain and B. Nayroles, Springer-Verlag, Berlin.
200. Simo, J. C. and Hughes, T. R. (1998) Computational Inelasticity, Springer, New York.
201. Simo, J. C., Kennedy, J. G. and Govindjee, S. (1988) "Non-smooth multisurface plasticity and viscoplasticity: Loading/unloading conditions and numerical algorithms," Int. J. Numer. Methods Eng. 26, 2161-2185.