State-of-the-art review on selective laser melting of ceramics

High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013

Volumn , Issue , 2014, Pages 65-70

  Yeong, W Y ^a   Yap, C Y ^a   Mapar, M ^a   Chua, C K ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIVE MANUFACTURING; FORMING TECHNIQUES; LAYER DEPOSITION; MELTING MECHANISM; POWDER PARTICLES; RESEARCH COMMUNITIES; SELECTIVE LASER MELTING; STATE-OF-THE-ART REVIEWS;

3D PRINTERS; CERAMIC MATERIALS; MANUFACTURE; MELTING; RAPID PROTOTYPING; ZIRCONIA;

INDUSTRIAL RESEARCH;

EID: 84892179694     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (43)

1. Ahmad, M., G. Ali, E. Ahmed, M. A. Haq and J. I. Akhter (2011). "Novel microstructural growth in the surface of Inconel 625 by the addition of SiC under electron beam melting.," Applied Surface Science 257(17): 7405-7410.
2. Ang, K. C., K. F. Leong, C. K. Chua and M. Chandrasekaran (2007). "Compressive properties and degradabilityofpoly(epsilon-caprolatone)/ hydroxyapatite composites under accelerated hydrolytic degradation," Journal of Biomedical Materials Research Part A 80A(3): 655-660.
3. Averyanova, M., P. Bertrand and B. Verquin (2011). "Manufacture of Co-Cr dental crowns and bridges by selective laser Melting technology.," Virtual and Physical Prototyping 6(3): 179-185.
4. Bae, C.-J. and J. W. Halloran (2011). "Integrally Cored Ceramic Mold Fabricated by Ceramic Stereolithography.," International Journal of Applied Ceramic Technology 8(6): 1255-1262.
5. Bengisu, M. (2001). Engineering Ceramics. Germany, Springer.
6. Bernard, S. A., V. K. Balla, S. Bose and A. Bandyopadhyay (2010). "Direct laser processing of bulk lead zirconate titanate ceramics.," Materials Science and Engineering B-Advanced Functional Solid-State Materials 172(1): 85-88.
7. Bertrand, P., F. Bayle, C. Combe, P. Goeuriot and I. Smurov (2007). "Ceramic components manufacturing by selective laser sintering.," Applied Surface Science 254(4): 989-992.
8. Chua, C. K., K. F. Leong and C. S. Lim (2010). Rapid Prototyping: Principles and Applications. Singapore, World Scientific Publishing Co. Pte. Ltd.
9. Dalgarno, K. W. and T. D. Stewart (2001). "Manufacture of production injection mould tooling incorporating conformal cooling channels via indirect selective laser sintering.," Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 215(10): 1323-1332.
10. Das, M., S. Bysakh, D. Basu, T. S. S. Kumar, V. K. Balla, S. Bose and A. Bandyopadhyay (2011). "Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium.," Surface & Coatings Technology 205(19): 4366-4373.
11. Delgado, J., J. Ciurana and L. Serenó (2011). "Comparison of forming manufacturing processes and selective laser melting technology based on the mechanical properties of products.," Virtual and Physical Prototyping 6(3): 167-178.
12. Deliormanli, A. M. and M. N. Rahaman (2013). In vitro evaluation of silicate and borate bioactive glass scaffolds prepared by robocasting of organic-based suspensions.
13. Ebert, J., E. Özkol, A. Zeichner, K. Uibel, Ö. Weiss, U. Koops, R. Telle and H. Fischer (2009). "Direct inkjet printing of dental prostheses made of zirconia.," Journal of Dental Research 88(7): 673-676.
14. Gomes, C. M., A. P. N. Oliveira, D. Hotza, N. Travitzky and P. Greil (2008). "LZSA glass-ceramic laminates: Fabrication and mechanical properties.," Journal of Materials Processing Technology 206(1-3): 194-201.
15. Hagedorn, Y.-C., J. Wilkes, W. Meiners, K. Wissenbach and R. Poprawe (2010). "Net shaped high performance oxide ceramic parts by selective laser melting.," Physics Procedia 5: 587-594.
16. Hagedorn, Y. C., N. Balachandron, W. Meiners, K. Wissenbach and R. Poprawe (2011). SLM of net-shaped high strength ceramics: new opportunities for producing dental restorations. SFF Symposium, Austin, Texas, USA.
17. Jandin, G., J. M. Bertin, L. Dembinski and C. Coddet (2005). Manufacture of stainless steel parts by selective laser melting process. London, Taylor & Francis Ltd.
18. Jhabvala, J., E. Boillat, T. Antignac and R. Glardon (2010). "On the effect of scanning strategies in the selective laser melting process.," Virtual and Physical Prototyping 5(2): 99-109.
19. Li, J. F., L. Li and F. H. Stott (2004). "Comparison of volumetric and surface heating sources in the modeling of laser melting of ceramic materials.," International Journal of Heat and Mass Transfer 47(6-7): 1159-1174.
20. Li, J. F., L. Li and F. H. Stott (2004). "A three-dimensional numerical model for a convection-diffusion phase change process during laser melting of ceramic materials.," International Journal of Heat and Mass Transfer 47(25): 5523-5539.
21. Liu, A., C. K. Chua and K. F. Leong (2010). "Properties of Test Coupons Fabricated by Selective Laser Melting.," Key Engineering Materials 447-448: 780-784.
22. Liu, F.-H. (2012). "Synthesisofbioceramic scaffolds for bone tissue engineering by rapid prototyping technique.," Journal of Sol-Gel Science and Technology 64(3): 704-710.
23. Liu, F. R., J. J. Zhao, Q. Zhang, C. He and J. M. Chen (2012). "Processing and characterizations of 2%PF/silica sand core-shell composite powders by selective laser sintering with a higher transmittance fiber laser," International Journal of Machine Tools and Manufacture 60: 52-58.
24. Liu, Z. H., C. K. Chua, K. F. Leong, K. Kempen, L. Thijs, E. Yasa, J. Van-Humbeeck and J. P. Kruth (2012). "A preliminary investigation on Selective Laser Melting of M2 High Speed Steel.," Innovative Developments in Virtual and Physical Prototyping - Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping: 339-346.
25. Liu, Z.H., C.K. Chua, K.F. Leong, L. Thijs, J. Van-Humbeeck and J. P. Kruth (2012). Microstructural Investigation of M2 High Speed Steel Produced by Selective Laser Melting. Symposium on Photonics and Optoelectronics, Shanghai, China.
26. Louvis, E., P. Fox and C. J. Sutcliffe (2011). "Selective laser melting of aluminium components.," Journal of Materials Processing Technology 211(2): 275-284.
27. Marcu, T., M. Todea, I. Gligor, P. Berce and C. Popa (2012). "Effect of surface conditioning on the flowability of Ti6Al7Nb powder for selective laser melting applications.," Applied Surface Science 258(7): 3276-3282.
28. NASA (2006). Orbiter Thermal Protection System. NASA Facts. N. A. a. S. Administration.
29. Novakova-Marcincinova, L., J. Novak-Marcincin, J. Barna and J. Torok (2012). Special materials used in FDM rapid prototyping technology application.
30. Ojovan, M. I. (2004). "Glass Formation in Amorphous SiO2 as a Percolation Phase Transition in a System of Network Defects.," JETP Letters 79(12): 632-634.
31. Sasaki, H., M. Suzuki, S. Otoshi, A. Kajimura and M. Ippommatsu (1992). "HIGH-POWER-DENSITY-SOLID-OXIDE-ELECTROLYTE FUEL-CELLS.," Journal of the Electrochemical Society 139(1): L12-L13.
32. Shah, R. B., M. A. Tawakkul and M. A. Khan (2008). "Comparative evaluation of flow for pharmaceutical powders and granules.," Aaps Pharmscitech 9(1): 250-258.
33. Shishkovsky, I., I. Yadroitsev, P. Bertrand and I. Smurov (2007). "Alumina-zirconium ceramics synthesis by selective laser sintering/melting.," Applied Surface Science 254(4): 966-970.
34. Tan, K. H., C. K. Chua, K. F. Leong, C. M. Cheah, P. Cheang, M. S. Abu Bakar and S. W. Cha (2003). "Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends.," Biomaterials 24(18): 3115-3123.
35. Tang, Y., J.Y. H. Fuh, H.T. Loh, Y. S. Wong and L. Lu (2003). "Direct laser sintering of a silica sand.," Materials and Design 24: 623-629.
36. Tian, X., B. Sun, J. G. Heinrich and D. Li (2012). "Scan pattern, stress and mechanical strength of laser directly sintered ceramics.," The International Journal of Advanced Manufacturing Technology 64(1-4): 239-246.
37. Tolochko, N. K., Y. V. Khlopkov, S. E. Mozzharov, M. B. Ignatiev, T. Laoui and V. I. Titov (2000). "Absorptance of powder materials suitable for laser sintering.," Rapid Prototyping Journal 6(3): 155-161.
38. Wang, X. H., J.Y. H. Fuh, Y. S. Wong and Y. X. Tang (2003). "Laser Sintering of Silica Sand - Mechanism and Application to Sand Casting Mould.," International Journal of Advanced Manufacturing Technology 21: 1015-1020.
39. Wang, X. H., J.Y. H. Fuh, Y. S. Wong and Y. X. Yang (2003). "Laser sintering of silica sand - mechanism and application to sand casting mould.," International Journal of Advanced Manufacturing Technology 21: 1015-1020.
40. Wilkes, J. and K. Wissenbach (2006). Rapid Manufacturign of Ceramic Components for Medical and Technical Applications via Seletive Laser Melting, Fraunhofer Institute for Laser Technology ITL: 6.
41. Wiria, F. E., C. K. Chua, K. F. Leong, Z. Y. Quah, M. Chandrasekaran and M. W. Lee (2008). "Improved biocomposite development of poly(vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering," Journal of Materials Science-Materials in Medicine 19(3): 989-996.
42. Yeong, W. Y., N. Sudarmadji, H. Y. Yu, C. K. Chua, K. F. Leong, S. S. Venkatraman, Y. C. F. Boey and L. P. Tan (2010). "Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering.," Acta Biomaterialia 6(6): 2028-2034.
43. Zocca, A., C. M. Gomes, E. Bernardo, R. Müller, J. Günster and P. Colombo (2013). "LAS glass-ceramic scaffolds by three-dimensional printing.," Journal of the European Ceramic Society 33(9): 1525-1533.