Applications of Turbulent and Multiphase Combustion

Applications of Turbulent and Multiphase Combustion

Volumn , Issue , 2012, Pages

  Kuo, Kenneth K ^a   Acharya, Ragini ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891583646     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118127575     Document Type: Book

References (465)

1. Acharya, R. (2009). Modeling and Numerical Simulation of Interior Ballistics Processes in a 120 mm Mortar Systems. Phd thesis, the Pennsylvania State University, University Park.
2. Acharya, R., and Kuo, K. K. (2007a). Graphite Rocket Nozzle Erosion Rate Reduction by Boundary-Layer Using Ablative Materials. 45th Aerospace Sciences Meeting and Exhibit. Reno, NV. AIAA-2007-0782.
3. Acharya, R., and Kuo, K. K. (2007b). Effect of Chamber Pressure and Propellant Composition on Erosion Rate of Graphite Rocket Nozzle. Journal of Propulsion and Power, 23 (6), 1,242-1,254.
4. Acharya, R., and Kuo, K. K. (2007c). Finite Element Simulation of Interior Ballistic Processes in 120-mm Mortar Systems. Proceedings of International Ballistics Symposium, 1, pp. 343-350.
5. Acharya, R., and Kuo, K. K. (2008a). Effect of Different Flash-tube Vent-hole Patterns on Interior Ballistic Processes of Ignition Cartridge of 120-mm Mortar System. International Journal of Energetic Materials and Chemical Propulsion, 1, 387.
6. Acharya, R., and Kuo, K. K. (2008b). Graphite Rocket Nozzle Erosion Rate Reduction by Boundary-Layer Control Using Ablative Materials at High Pressures. International Journal of Energetic Materials and Chemical Propulsion, 1, 402.
7. Acharya, R., and Kuo, K. K. (2010a). Effect of Reaction Kinetic Schemes on Graphite Rocket Nozzle Erosion Rates. International Journal of Energetic Materials and Chemical Propulsion, 9 (1), 71-90.
8. Acharya, R., and Kuo, K. K. (2010b). Numerical Simulation of Graphite Nozzle Erosion with Parameteric Analysis. 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Nashville, TN.
9. Acharya, R., and Kuo, K. K. (2010c). Implementation of Approximate Riemann Solver to Two-Phase Flows in Mortar Systems. Journal of Applied Mechanics, 77 (5).
10. Acharya, R., Kuo, K. K., Ferrara, P. J., Rand, H. T., and Nimphius, J. R. (2010). Comprehensive Modeling and Numerical Simulation of Interior Ballistics Processes in 120 mm Mortar System with Systematic Experimental Validation. Twenty-Sixth Army Science Conference, Orlando, FL.
11. Acharya, R., Kuo, K. K., Ferrara, P. J., Rand, H. T., and Nimphius, J. R. (2010). Comprehensive Three-Dimensional Mortar Interior Ballistics Model for 120 mm Mortar System with Experimental Validation. 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Denver, CO.
12. Agarwal, J. P. and Hodgson, R. D. (2007). Organic Chemistry of Explosives. Hoboken, NJ: John Wiley and Sons.
13. Ahmad, T. (1978). Investigation of the Combustion Region of Fire-Induced Plumes along Upright Surfaces. Ph.D. thesis, The Pennsylvania State University.
14. Ahmad, T., and Faeth, G. M. (1978). An Investigation of the Laminar Overfire Region along Upright Surfaces. J. Heat Transfer, 100 (1), 112.
15. Ahmad, T., and Faeth, G. M. (1979). Turbulent Wall Fires. 17th Symposium (International) on Combustion, 17, pp. 1149-1160.
16. Alkidas, A. C., Plett, E. G., and Summerfield, M. (1976). A Performance Study of Ballistic Compressor. AIAA Journal, 14 (12), 1752-1758.
17. Allen, M. T., Yetter, R. A., Dryer, F. L. (1995). The Decomposition of Nitrous Oxide at 1.5 < P < 10.5 Atm and 1103 < T < 1173 K, International Journal of Chemical Kinetics, 27, 9, pp. 883-909.
18. Anderson, E. C., and Lewis, C. H. (1971). Laminar or Turbulent Boundary-Layer Flows of Perfect Gases or Reacting Gas Mixtures in Chemical Equilibrium. NASA Technical Report Cr-1893.
19. Anderson, L. W. and Kendall, R. M. (1970). A Nonsimilar Solution for Multicomponent Reacting Laminar and Turbulent Boundary Layer Flows Including Transverse Curvature. AFWL TR-69-106.
20. Anderson, T. B. and Jackson, R. (1967). Fluid Mechanical Description of Fluidized Beds. Equations of Motion. Ind. Eng. Chem. Fundamen., 6 (4), pp. 527-539.
21. Anderson, W. R., and Connor, C. B. (2009). Comparison of Gas-Phase Mechanisms Applied to RDX Combustion Model. Proc. 32nd Int. Symp. Combust., pp. 2,123-2,130.
22. Andersson, K. (1961). Pressure Drop in Ideal Fluidization. Chem. Eng. Sci., 15, 276-297.
23. Aoki, I., and Kubota, N. (1982). Combustion Wave Structures of High-and Low-Energy Double-Base Propellants. AIAA Journal, 20 (1), 100-105.
24. Arora, R., Kuo, K. K., and Razdan, M. K. (1982). Turbulent Boundary-Layer Flow Computations with Special Emphasis on the Near-Wall Region. AIAA Journal, 20 (11), 1,481-1,482.
25. Ashcroft, N., and Mermin, D. (1976). Solid State Physics (Chapter 7). New York, Holt, Rinehart and Winston.
26. Atwood, A. I., Boggs, T. L., Curran, P. O., Parr, T. P., and Hanson-Parr, D. M. (1999). Burning Rate of Solid Propellant Ingredients, Part 1: Pressure and Initial Temperature Effects. Journal of Propulsion and Power, 15 (6), 740.
27. Atwood, A. I., Boggs, T. L., Curran, P. O., Parr, T. P., Hanson-Parr, D. M., Price, C. F., (1999). Burning Rate of Solid Propellant Ingredients. Part 2: Determination of Burning Rate Temperature Sensitivity. Journal of Propulsion and Power, 15 (6), 748-752.
28. Babuk, V. A. (1996). Combustion of Metal Fuel as an Ingredient of Propellant. Book of Lectures of the International Seminar on Intra-Chamber Process, Combustion and Gas Dynamics of Dispersed Systems, pp. 74-85. St. Petersburg, Russia.
29. Babuk, V. A., Belov, V. P., and Khodosov, V. V. (1985). Investigation of Aluminum Particle Agglomeration in Combustion as an Ingredient of Double-Base Condensed Systems. Physics of Combustion and Explosion, 21 (3), 20-25.
30. Babuk, V. A., Belov, V. P., and Khodosov, V. V. (1988). Investigation of Agglomerate Structure in Combustion of Double-Base Condensed System. Physics of Combustion and Explosion, 24 (4), 52-57.
31. Babuk, V. A., Belov, V. P., and Romanov, O. Y. (1989). Surface Layer Structure in Combustion of Condensed System. Proceedings of the IX Symposium on Combustion and Explosion, (pp. 21-25). Inst. of Chemical Physics, Chernogolovka, Moscow.
32. Babuk, V. A., Belov, V. P., and Shelukhin, G. G. (1981). Specific Features of Aluminum Particles Burning as an Ingredient of Double-Base Condensed Systems at Low and High Pressure Levels. Physics of Combustion and Explosion, 17 (3), 26-31.
33. Babuk, V. A., and Sviridov, V. V. (1979). Analysis and Synthesis of Models for CCP Formation Close to Burning Propellant Surface. Proceedings of the International Conference on Combustion, vol. 1, pp. 40-46. Inst. of AppliedMechanics, Ural Branch of Russian Academy of Sciences, Izhevsk, Russia.
34. Babuk, V. A., Vasilyev, V. A., and Malakhov, M. S. (1999). Condensed Combustion Products at the Burning Surface of Aluminized Solid Propellant. Journal of Propulsion and Power, 15 (6), 783-793.
35. Babuk, V. A., Vassiliev, V. A., and Naslednikov, P. A. (2002). Experimental Study of Evolution of Condensed Combustion Products in Gas Phase of Burning Solid Rocket Propellant. Report, Baltic State Technical Unversity, Saint Petersburg, Russia.
36. Babuk, V. A., Vassiliev, V. A., and Sviridov, V. V. (2000). Formation of Condensed Combustion Products at the Burning Surface of Solid Rocket Propellants. In Progress in Astronautics and Aeronautics (p. 21). Reston, VA: AIAA, Inc.
37. Baer, B. J., Oxley, J. C., and Nicol, M. (1990). The Phase Diagram of RDX under Hydrostatic Pressure. High Pressure Reseach, 2, pp. 99.
38. Baer, M., and Nunziato, J. (1986). A Two-Phase Mixture Theory for the Deflagration-to-Detonation Transition (DDT) in Reactive Granular Materials. International Journal of Multiphase Flow, 12 (6), 861-889.
39. Baker, R. J., and Launder, B. E. (1974). The Turbulent Boundary Layer with Foreign Gas Injection II. Predictions and Measurements in Severe Stream-wise Pressure Gradient. Int. J. Heat Mass Transfer, 17, 293-306.
40. Bartlett, E. P. (1967). An Analysis of the Coupled Chemically Reacting Boundary Layer and Charring Ablator. Part 4-A Unified Approximation for Mixture Transport Properties for Multicomponent Boundary-Layer Applications. National Aeronautics and Space Administration (NASA).
41. Bartlett, E. P., Kendall, R. M., and Rindal, R. A. (1967). A Unified Approximation for Mixture Transport Properties for Multicomponent Boundary Layer Applications. Aerotherm Corporation, Final Report 66-7, Part IV.
42. Bartz, D. R. (1957). A Simple Equation for Rapid Estimation of Rocket Nozzle Convective Heat Transfer Coefficient. Journal of Jet Propulsion, 27 (1), 49-51.
43. Bathelt, H., Volk, F., and Weindel, M. (2001). The ICT Database of Thermochemical Values version 3.0. Fraunhofer Institut für Chemische Technologie (ICT), D-76318 Pfinztal.
44. Bazyn, T., Krier, H., and Glumac, N. (2005). Oxidizer and pressure effects on the combustion of 10-μm aluminum particles. Journal of Propulsion and Power, 21 (4), 577-582.
45. Bazyn, T., Krier, H., and Glumac, N. (2006). Combustion of Nanoaluminum at Elevated Pressure and Temperature Behind Reflected Shock Waves. Combustion and Flame, 145 (4), 703-713.
46. Bdzil, J., Menikoff, R., Son, S., Kapila, A., and Stewart, D. (1999). Two-Phase Modeling of Deflagration-to-Detonation Transition in Granular Materials: A Critical Examination of Modeling Issues. Phys. Fluids, 11 (2), 378-402.
47. Beckstead, M. W. (2004). A Summary of Aluminum Combustion. Technical Report published by Ft. Belvoir Defense Technical Information Center.
48. Beckstead, M. W., Liang, Y., and Pudduppakkam, K. V. (2005). Numerical Simulation of Single Aluminum Particle Combustion (Review). Combustion, Explosion, and Shock Waves, 41 (6), 622-638.
49. Beckwith, I. E., and Bushnell, D. M. (1971). Calculation by a Finite-Difference Method of Supersonic Turbulent Boundary Layers with Tangential Slot Injection. NASA TN-D-6221.
50. Behrens, Jr., R. (1990). Thermal Decomposition of HMX and RDX: Decomposition Process and Mechanisms Based on STMBMS and TOF Velocity-Spectra Measurements. In Chemistry and Physics of Energetic Materials, S. N. Bulusu (ed.). NATO Scientific Affairs Division, pp. 347-771.
51. Behrens Jr., R. and Bulusu, S. (1992). Thermal Decomposition of Energetic Materials. 4. Deuterium Isotope. Journal of Physical Chemistry, 96 (22), 8,891-8,897.
52. Belyaev, A. F., Frolov Y. V., and Korotkov A. I. (1968). Combustion and Ignition of Particles of Finely Dispersed Aluminum, Combustion, Explosion and Shock Waves, 4 (3), 323-329.
53. Bhatia, R. and Sirignano, W. A. (1993). Convective Burning of a Droplet Containing a Single Metal Particle. Combustion and Flame, 93 (3), 215-229.
54. Bianchi, D., Nasuti, F., and Martelli, E. (2009). Coupled Analysis of Flow and Surface Ablation in Carbon-Carbon Rocket Nozzles. Journal of Spacecraft and Rockets, 46 (3), 492.
55. Bird, R. B. (1962). Diffusion in Multicomponent Gas Mixtures. Presented at 25th Anniversary Congress Society of Chemical Engineers (Japan). 26, pp. 718-721. Published in abbreviated form in Kagaku Kohaku.
56. Bird, R. B., Stewart, W. E., and Lightfoot, E. N. (1960). Transport Phenomena. New York: John Wiley and Sons.
57. Blackburn, P. E. (1965). Thermodynamics of Condensed and Vapor Phases in the Binary and Ternary Systems of BE-B-O, AL-B-O, SI-O, AL-BE-O AND AL-B-F. Arthur D. Little Final Report, ARPA Project Code No. 9100, ARPA Order No. 315-62.
58. Blackshear, R. L. Jr. and Murty, K. A. (1965). Heat and Mass Transfer to, from, and within Cellulosic Solids Burning in Air. 10th Symposium (International) on Combustion, 10, 911-923.
59. Blottner, F. G., Johnson, M., and Ellis, M. (1971). Chemically Reacting Viscous Flow Program for Multi-Component Gas Mixtures. Technical Report, Sandia Labs, Albuquerque, NM.
60. Boggs, T. L. (1970). Deflagration Rate, Surface Structure, and Subsurface Profile of Self Deflagrating Single Crystals of Ammonium Perchlorate. AIAA Journal, 8 (5), 867-873.
61. Boggs, T. L. (1984). The Thermal Behavior of Cyclotrimethylenetrinitramine (RDX) and Cyclotetramethylenetetranitramine (HMX). In K. K. Kuo, and M. Summerfield (eds.), Fundamentals of Solid-Propellant Combustion, v90, pp. 121-175. AIAA.
62. Bonnetain, L., and Hoynant, G. (1965). Les Carbones. (A. Pacault, ed.) Paris: 2, Masson et Cie.
63. Borie, V., Brulard, J., and Lengelle, G. (1989). Aerothermochemical Analysis of Carbon-Carbon Nozzle Regression in Solid-Propellant Rocket Motors. Journal of Propulsion and Power, 5 (6), 665.
64. Botcher, T. R. and Wight, C. A. (1994). Explosive Thermal Decomposition Mechanism of RDX, 98 (21), pp. 5,441-5,444.
65. Bottaro, J. C., Schmitt, R. J., Penwell, P. E., and Ross, D. S. (1993). Dinitramide Salts and Method of Making Same. US Patent No. 5,254,324.
66. Boyd, E. R., Houim, R. W., and Kuo, K. K. (2010). Ignition and Combustion of Nickel Coated and Uncoated Aluminum Particles in Hot Post-Flame Environment. AIAA-2009-5441.
67. Boyer, E., Lu, Y. C., Desmarais, K., and Kuo, K. K. (1994). Observation and Characterization of Burning Surface Reaction Zones of Solid Propellants. 31st JANNAF Combustion Subcommittee Meeting (Sunnyvale CA), II, ppp. 211-220
68. Bradley, D., Dixon-Lewis, G., Habik, S. E., and Mushi, E. M. (1984). The Oxidation of Graphite Powders in Flame Reaction Zone. 20th Symposium (International) on Combustion, 20, pp. 931-940.
69. Brill, T. B. (1995). Multiphase Chemistry Considerations at the Surface of Burning Nitramine Monopropellants. Journal of Propulsion and Power, 11 (4), pp. 740-751.
70. Brill, T. B., Brush, P. J., James, K. J., Shepherd, J. E., and Pfeiffer, K. J. (1992). T-Jump/FT-IR Spectroscopy: A New Entry into the Rapid, Isothermal Pyrolysis Chemistry of Solids and Liquids. Applied Spectroscopy, 46 (6), 900-911.
71. Brill, T. B., Brush, P. J., Kinloch, S. A. (1992). Condensed Phase Chemistry of Explosives and Propellants at High Temperature: HMX, RDX. Philosophical Transactions: Physical Sciences and Engineering, 339 (1654), pp. 377-385.
72. Brill, T. B., Brush, P. J., and Patil, D. G. (1993). Thermal Decomposition of Energetic Materials. Major Reaction Stages of a Simulated Burning Surface of NH4CIO4. Combustion and Flame, 94, 70-76.
73. Brooks, K. (1995). Characterization of the Flame and Aluminum Particles in a Rijke Burner. Masters thesis, Brigham Young University, Dept. of Chemical Engineering, Provo, UT.
74. Brooks, K. P., and Beckstead, M. W. (1995). Dynamics of Aluminum Combustion. Journal of Propulsion and Power, 11 (4), 769-780.
75. Brossard, C., Ulas, A., Yeh, C. L., and Kuo, K. K. (1997). Ignition and Combustion of Isolated Aluminum Particles in the Post-Flame Region of a Flat-Flame Burner. 16th International Colloquium on the Dynamics of Explosions and Reactive Systems. Krakow, Poland.
76. Brotherton, R. J. (1964). Progress in Boron Chemistry, vol. 1. (H. Steinberg, and A. L. McCloskey, eds.) New York: MacMillan.
77. Brown, R. C., Kolb, C. E., Cho, S. Y., Yetter, R. A., Dryer, F. L., and Rabitz, H. (1994). Kinetic Model for Hydrocarbon-Assisted Particulate Boron Combustion. International Journal of Chemical Kinetics, 26 (3), 319-332.
78. Brown, R. C., Kolb, C. E., Rabitz, H., Cho, S. Y., Yetter, R. A., and Dryer, F. L. (1991). Kinetic Model of Liquid B2O3 Gasification in a Hydrocarbon Combustion Environment: I. Heterogeneous Surface Reactions. International Journal of Chemical Kinetics, 23 (11), 957-970.
79. Brown, R. C., Kolb, C. E., Yetter, R. A., Dryer, F. L., and Rabitz, H. (1995). Kinetic Modeling and Sensitivity Analysis for B/H/O/C/F Combination Systems. Combustion and Flame, 101 (3), 221-238.
80. Brzustowski, T. A., and Glassman, I. (1964). Vapor-Phase Diffusion Flames in the Combustion of Magnesium and Aluminum, I. Analytical Developments. in H. G. Wolfard, I. Glassman, and L. Green (eds.), Heterogeneous, Combustion, AIAA Progress Series in Astronautics and Aeronautics, 15, pp. 75-116. New York: Academic Press.
81. Bucher, P., Yetter, R. A., Dryer, F. L., Parr, T. L., and Hanson-Parr, D. M. (1997). Aluminum Particle Gas-Phase Flame Structure. 34th JANNAF Combustion Subcommittee Meeting.
82. Bucher, P., Yetter, R. A., Dryer, F. L., Parr, T. L., and Hanson-Parr, D. M. (1998). Plif Species and Ratiometric Temperature Measurements of Aluminum Particle Combustion in O2, Co2 and N2o Oxidizers, and Comparison with Model Calculations. Twenty-Seventh Symposium (International) on Combustion, 27 (2), pp. 2,421-2,429. Pittsburgh, PA: The Combustion Institute.
83. Bucher, P., Yetter, R. A., Dryer, F. L., Parr, T. P., Hanson-Parr, D. M., and Viceni, E. P. (1996). Flames Structure Measurement of Single, Isolated Aluminum Particles Burning in Air. Twenty-Sixth Symposium (International) on Combustion, 26, 2, pp. 1,899-1,908. Pittsburgh, PA: The Combustion Institute.
84. Bucher, C., Yetter, R. A., Dryer, F. L., Vicenzi, E. P., Parr, T. P., and Hanson-Parr, D. M. (1996). Observations on Aluminum Particles Burning in Various Oxidizers. The 33rd JANNAF Combustion Subcommittee Meeting, pp. 449-45.
85. Bulusu, S., and Graybush, R. J. (1967). Chemistry and Physics of Energetic Materials, Proceedings of the 36th International Congress on Industrial Chemistry, 32, p. 647. Brussels, Belgium.
86. Burick R. J. and Osborn, J. R. (1967). Erosive Combustion of Double-Base Solid Rocket Propellants, CPIA Publication 162, II, 57-69.
87. Cady, H. H., Lawson, A. C., and Cromer, D. T. (1963). The Crystal Structure of Alpha-HMX and a Refinement of the Structure of Beta-HMX. Acta Crytsallography, 16, pp. 617.
88. Cebeci, T. (1970) A Model for Eddy-Conductivity and Turbulent Prandtl Number, Report MDC-J0747/01, McDonnell-Douglas Corporation.
89. Cebeci, T., and Chang, K. C. (1978). Calculation of Incompressible Rough-Wall Boundary-Layer Flows. AIAA Journal, 16 (7), 730-735.
90. Cebeci, T., and Khattab, A. (1975). Prediction of Turbulent Free Convection from Vertical Surfaces. ASME Trans., Ser. C, J. Heat Transfer, 97, 469-471.
91. Cebeci, T., and Smith, A. M. (1970). A Finite-Difference Method for Calculating Compressible Laminar and Turbulent Bounary Layers. J. Basic Engrg., Paper No. 70-FE-A.
92. Cebeci, T., and Smith, A. M. (1974). Analysis of Turbulent Boundary Layers. New York: Academic Press.
93. Cebeci, T., Smith, A. M., and Mosinskis, G. (1970). Closure to "Discussion of Solution of the Incompressible Turbulent Boundary-Layer Equations with Heat Transfer. ASME J. Heat Transfer, 92 (1), 141.
94. Chakraborty, D., Muller, R. P., Dasgupta, S., and Goddard, W. A. III (2000). The Mechanism for Unimolecular Decomposition of RDX (1,3,5-Trinitro-1,3,5-Triazine), An Ab Initio Study. Journal of Physical Chemistry, 104, pp. 2,261-2,272.
95. Chambers, T. L., and Wilcox, D. C. (1977). Critical Examination of Two-Equation Turbulence Closure Models for Boundary Layers. AIAA Journal, 15 (6), 821-828.
96. Chase, J. M., Davies, C. A., Downey, J. J., Frurip, D. J., McDonald, R. A., and Syverud, A. N. (1985). JANAF Thermochemical Tables. Third edition. I, Al-Co. II, Cr-Zr. (Retroactive Coverage). J. Phys. Chem. Ref. Data, 14.
97. Chelliah, H. K., Makino, A., Kato, I., Araki, N., and Law, C. K. (1996). Modeling of Graphite Oxidation in a Stagnation-Point Flow Field Using Detailed Homogeneous and Semi Global Heterogeneous Mechanisms with Comparisons to Experiments. Combustion and Flame, 104 (4), 469-480.
98. Choi, C. S., and Prince, E. (1972). The Crystal Structure of Cyclotrimethylene-Trinitramine. Acta Crystallography, B28 (9), pp. 2,857-2,862.
99. Chung, P. M. (1965). Chemically Reacting Nonequilibrium Boundary Layers. In T. F. Irvine, and J. P. Hartnett, Advances in Heat Transfer, 2, 109-268.
100. Ciezak, J. A., and Jenkins, T. A. (2008). The Low-Temperature High-Pressure Phase Diagram of Energetic Materials: I. Hexahydro-1,3,5-Trinitro-s-Triazine. Propellants Explos., Pyrotech., 33 (5), pp. 390-395.
101. Cohen, N. S. (1981). A Pocket Model for Aluminum Agglomeration in Composite Propellants. AIAA Journal, 21 (5), 720.
102. Colburn, A. P. (1933). A Method of Correlating Forced Convection Heat Transfer Data and a Comparison with Fluid Friction. Trans. AIChE, 29, 174.
103. Connor, C. B., and Anderson, W. R. (2009). Modeling the Combustion of JA2 and Solid Propellants of Similar Composition. Proceedings of 32nd International Sympoisum on Combustion, 32, pp. 2,131-2,137.
104. Conroy, M. W., Oleynik, I. I., Zybin, S. V., and White, C. T. (2008). Density Functional Theory Calculations of Anisotropic Constitutive Relationships in Alpha-Cyclotrimethylenetrinitramine. Journal of Applied Physics, 104, 113501.
105. Cooper, P. W. (1996). Explosives Engineering. New York: Wiley-VCH.
106. Cosgrove, J. D., and Owen, A. J. (1968). The Thermal Decomposition of 1,3,5=Trinitrohexahydro 1,3,5-triazine. Chemical Communications (London), pp. 286.
107. Culbertson, B., and Brezinsky, K. (2009). High-Pressure Shock Tube Studies on Carbon Oxidation Reactions with Carbon Dioxide and Water. Energy Fuels, 23 (12), 5,806-5,812.
108. Davenas, A. (1993). Solid propellant propulsion technology. Oxford: Pergamon Press.
109. Davenas, A. (2003). Development of Modern Solid Propellants. Journal of Propulsion and Power, 19 (6), 1,108-1,128.
110. Davidson, A. J., Oswald, I. D.H., Francis, D. J., Lennie, A. R., Marshall, W. G., Millar, D. I. A., Pulham, C. R., Warren, J. E., Cumming, A. S., (2008). Explosives under Pressure-The Crystal Structure of Gamma RDX as Determined by High-Pressure X-Ray and Neutron Diffraction. Crystengcomm, 10, pp. 162-165.
111. Davidson, D. F., DiRosa, M. D., Chang, A. Y., and Hanson, R. K. (1992). Shock Tube Measurements of the Major Product Channels of N2O + O. In K. Takayama (ed.), Proceedings of the 18th International Symposium on Shock-Tube Waves, pp. 813-818. Springer-Verlag.
112. De Luca, L., Price, E. W., and Summerfield, M. (eds.). (1992). Nonsteady Burning and Combustion Stability of Solid Propellants (vol. 143). Washington DC: American Institute of Aeronautics and Astronautics, Inc.
113. de Ris, J., Kanury, A. M., and Yuen, M. C. (1973). Pressure Modeling of Fires. Fourteenth Symposium (International) on Combustion, 14, pp. 1,033-1,044.
114. de Ris, J., and Orloff, L. (1974). The Role of Buoyancy, Direction and Radiation in Turbulent Diffusion Flames on Surface. Fifteenth Symposium (International) on Combustion, 15, pp. 175-182. Pittsburgh: The Combustion Institute.
115. Delaney, L. J., Eagleton, L. C., and Jones, W. H. (1964). A Semiquantitative Prediction of the Erosion of Graphite Nozzle Inserts. AIAA Journal, 2 (8), 1428.
116. Denton, W. (1951). General Discussion on Heat Transfer. Institute of Mechanical Engineers and American Society of Mechanical Engineers, 370.
117. Derevyaga, M. E., Stesik, L. N., and Fedorin, E. A. (1979). Ignition and Combustion of High-Melting Metals (Tungsten, Molybdenum, Boron). Combustion, Explosion, and Shock Waves, 15 (4), 438-446.
118. Diaconis, N. S., Gorsuch, P. D., and Sheridan, R. A. (1962). The Ablation of Graphite in Dissociated Air. Part II. Experimental Investigation. IAS Paper No. 62-155.
119. DiGiuseppe, T. G., and Davidovits, P. (1981). Boron Atom Reactions. II. Rate Constants with O2, SO2, CO2, and N2O. J. Chem. Phys., 74 (6), 3,287-3,292.
120. Digiuseppe, T. G., Estes, R., and Davidovits, P. (1982). Boron Atom Reactions. 3. Rate Constants with Water, Hydrogen Peroxide, Alcohols, and Ethers. J. Phys. Chem., 86 (2), 260-262.
121. Dirling, R. B., Heightland, C. N., Loomis, W. C., Ellis, R. A. and Kearney, A. J. (1983). AFWAC-TR-83-4082.
122. Dobartz, B. M. (1981). LLNL Explosives Handbook, Properties of Chemical Explosives and Explosive Simulants. UCRL-52997, Lawrence Livermore National Laboratoy.
123. Doherty, R. M. (2008). Wrestling with New Energetic Ingredients. In K. Hori and K. Kuo (eds.), Advancements in Energetic Materials and Chemical Propulsion, pp. 3-18. Redding, CT: Begell House.
124. Dorrance, W. H. (1962). Viscous Hypersonic Flow. New York: McGraw-Hill.
125. Dreizin, E. L. (1999a). Experimental Study of Aluminum Particle Flame Evolution in Normal and Micro-Gravity. Combustion and Flame, 116, 323-333.
126. Dreizin, E. L. (1999b). On the Mechanism of Asymmetric Aluminum Particle Combustion. Combustion and Flame, 117, 841-850.
127. Dreizin, E., and Calcote, H. (1995). A New Mechanism of Boron Ignition: Through the Formation of a Saturated B-O-Solution. Eastern States Section Meeting, pp. 333-336. Pittsburgh, PA: The Combustion Institute.
128. Drew, D. A., and Passman, S. L. (1998). Theory of Multicomponent Fluids. New York: Springer-Verlag.
129. Eiland, P. L., and Pepinsky, R. (1955). Z. Kristallogr., 106, 273.
130. Elghobashi, S. E., and Pun, W. M. (1974). A Theoretical and Experimental Study of Turbulent Diffusion Flames in Cylindrical Furnaces. 15th Symposium (International) on Combustion, 15, 1,353-1,365.
131. Ermolin, N. E., Korobeinichev, O. P., Kuibida, L. V., and Fomin, V. M. (1987). Study of the Kinetics and Mechanism of Chemical Reactions in Hexogen Flames. Translated from Fizika Goreniya I Vzryva, Plenum Publishing, 22, (5), 544-553.
132. Essel, J. T., Cortopassi, A. C., Kuo, K. K., Adair, J. H., Leh, C. G., Klapoetke, T. M. (2010). Synthesis of Energetic Materials by Rapid Expansion of a Supercritical Solution into Aqueous Solution (RESS-AS) Process, technical report published by DTIC.
133. Evans, B., Kuo, K., Boyd, E., and Cortopassi, A., (2009). Comparison of Nozzle Throat Erosion Behavior in a Solid-Propellant Rocket Motor and a Simulator. 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Denver, Colorado, AIAA-2009-5421.
134. Evans, B., Kuo, K., and Cortopassi, A., (2010). Characterization of Nozzle Erosion Behavior under Rocket Motor Operating Conditions. Accepted for publication in International Journal of Energetic Materials and Chemical Propulsion, 9 (6), 470.
135. Evans, B., Kuo, K. K., Ferrara, P. J., Moore, J. D., Kutzler, P., and Boyd, E. (2008). Nozzle Erosion Characterization in a Non-Metallized Solid-Propellant Rocket Motor Simulator. International Journal of Energetic Materials and Chemical Propulsion, 7 (3), 209-222.
136. Evans, R. M. (1975). Boundary Layer Integral Matrix Procedures, Aerotherm Report UM-75-64, Acurex Corporation, Mountain View, CA.
137. Faeth, G. M. (1984). Status of Boron Combustion Research. Technical report, Air Force Office of Scientific Research, Boiling AFB, Washington DC.
138. Fay, J. A., and Riddell, F. R. (1958). Theory of Stagnation Point Heat Transfer in Dissociated Air. Journal of the Aeronautical Sciences, 25 (2), 73-85.
139. Fifer, R. A. (1984). Nitrate Ester and Nitramine Propellants. In K. K. Kuo, and M. Summerfield (eds.), Fundamentals of Solid Propellant Combustion, 90, 177-237.
140. Finlinson, J. C., and Atwood, A. I. (1997). HNF Burnrate, Temperature Sensitivity, and Laser Recoil Response from 1 to 6 atm (Sanitized). 34th JANNAF Combustion Subcommittee Meeting. West Palm Beach, Fl.
141. Foelsche, R. O., Burton, R. L., and Krier, H. (1999). Boron Particle Ignition and Combustion at 30-150 atm. Combustion and Flame, 117 (1-2), 32-58.
142. Frankle, R. S., and Lebiedzik, J. (1980). A New Technique for Characterizing Surface Roughness. JANNAF Rocket Nozzle Technology Subcommittee Meeting, 415-431. Monterey, CA.
143. Friedman, R., and Maček, A. (1964). A Novel Chemical System for Generation of Electron-Rich Gases. Tenth Symposium (International) on Combustion, 10, pp. 731-741. Pittsburgh, PA: The Combustion Institute.
144. Frolov, Y. V., Pokhil, P. F., and Logachev, V. S. (1972). Ignition and Combustion of Powdered Aluminum in High-Temperature Gaseous Media and in a Composition of Heterogeneous Condensed Systems. Combustion, Explosion and Shockwaves, 8 (2), 168-187.
145. Fry, R. S. (1998). "Solid Rocket Motor Test and Test Techniques, Component Testing and Verification, Solid Propellant Burning Rate," AIAA Solid Rocket Technical Committee Lecture Series, 36th Aerospace Sciences Meeting.
146. Fry, R. S., DeLuca, L., Frederick, R., Gadiot, G., and Strecker, R. (2002). Evaluation of Methods for Solid Propellant Burning Rate Measurement. NATO RTO Technical Report RTO-TR-043, NATO RTO AVT Working Group 016, Johns Hopkins University/CPIA, February.
147. Gany, A., and Caveny, L. H. (1982). Mechanism of Chemical and Physical Gas-Metal Interactions in Very High Shearing Regimes. Nineteenth Symposium (International) on Combustion, 19, 731-740.
148. Gany, A., Caveny, L. H., and Summerfield, M. (1978). Aerothermochemistry of Metal Erosion by Hot Reactive Gases. ASME J. Heat Transfer, 100 (3), 531-536.
149. Gaponenko, L. A., Biunovskii, S. N., Tulupov, Y. I., and Yakovleva, T. A. (1981). A Model for the Ignition of a Single Boron Particle in a Medium Containing Water. Combustion, Explosion, and Shock Waves, 17 (1), 13-19.
150. Gash, A. E., Simpson, R. L., Tillotson, T. M., Satcher, J. H., and Hrubesh, L. W. (2000). Making Nanostructured Pyrotechnics. In A Beaker, Proceedings of the 27th International Pyrotechnics Seminar, pp. 41-53. Grand Junction, CO.
151. Geisler, R. L. (1978). The Relationship between Solid Propellant Formulation Variables and Nozzle Recession Rates. JANNAF Rocket Nozzle Technology Subcommittee Workshops. Lancaster, CA.
152. Geisler, R. L., and Beckman, C. (1998). The History of the Bates Motors at the Air Force Rocket Propulsion Laboratory. AIAA/ASME/SAE/ASEE Joint Propulsion Conference. AIAA.
153. Gibbs, T. R., and Popolato, A. (1980). LASL Explosive Property Data. Berkeley: University of California Press, pp. 141-151.
154. Glassman, I. (1959). Metal Combustion Processes. New York: Amer. Rocket Soc. ARS reprint.
155. Glassman, I. (1960). Combustion of Metals: Physical Considerations. In Ars Progress in Astronautics and Rocketry. Vol. 1. Solid Propellant Rocket Research, pp. 253-258. New York: Academic Press.
156. Glassman, I., Williams, F. A., and Antaki, P. (1982). Aphysical and Chemical Interpretation of Boron Particle Combustion. 19th JANNAF Combustion Meeting, 1, pp. 63-72. CPIA Pub. 366.
157. Glassman, I., Williams, F. A., and Antaki, P. (1984). A Physical and Chemical Interpretation of Boron Particle Combustion. Twentieth Symposium (International) on Combustion, 20, pp. 2,057-2,064. Pittsburgh, PA: The Combustion Institute.
158. Glick, R. L., (1975) Reduction of Solid Rocket Data when Pressure-Time History is Non-Neutral. Journal of Spacecraft and Rockets, 12 (6), pp. 383-384.
159. Glumac, N., and Krier, H. (2009). On the Transition From Classical Diffusion-Limited Combustion Behavior for Fine and Ultrafine Aluminum Particles. Invited paper, University of Illinois, Urbana, IL.
160. Glumac, N., Krier, H., and Bazyn, T. (2005). Temperature Measurements of Aluminum Particles Burning in Carbon. Combust. Sci. Technol., 177, 485.
161. Golovina, E. C. (1980). The Gasification of Carbon by Carbon Dioxide at High Temperatures and Pressures. Carbon, 18 (3), 197-201.
162. Gomez, A., Rosner, D. E., and Zvuloni, R. (1993). Combustion of Boron-Based Propellants and Solid Fuels. (K. K. Kuo, and R. Pein, eds.) Begell House Publishing Co. and CRC Press, Inc..
163. Goroshin, S., Mamen, J., Higgins, A., Bazyn, T., Glumac, N., and Krier, H. (2007). Emission spectroscopy of flame fronts in aluminum suspensions. Proceedings of the Combustion Institute, 31 (2), pp. 2,011-2,019. Pittsburgh: The Combustion Institute.
164. Gosman, A. D., Lockwood, F. C., and Syed, S. A. (1976). Prediction of Horizontal Free Turbulent Diffusion Flame. 16th Symposium (International) on Combustion, 16, pp. 1,543-1,555.
165. Goto, N., Fujihisa, H., Yamawaki, H., Wakabayahi, K., Nakayama, Y., Yoshida, M., et al. (2006). Crystal Structure of the High-Pressure Phase of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Journal of Physical Chemistry, 110 (47), pp. 23,655-23,659.
166. Gough, P., and Zwarts, F. (1979). Modeling Heterogeneous Two-Phase Reacting Flow. AIAA Journal, 17 (1), 17-25.
167. Gowariker, V. R. (1966). Mechanical and Chemical Contributions to the Erosion Rates of Graphite Throats in Rocket Motor Nozzles. Journal of Spacecraft and Rockets, 3, 1,490-1,494.
168. Grella J. J., and Faeth, G. M. (1975). Measurements in a Two-DimensionalThermal Plume along a Vertical Adiabatic Wall. Journal of Fluid Mechanics, 71, 701-710.
169. Gremyachkin, V. M., Istratov, A. G., and Leipunskii, O. I. (1975). Model for the Combustion of Metal Droplets. Combustion, Explosion and Shockwaves, 11 (3), 313-318.
170. Gremyachkin, V. M., Istratov, A. G., and Leipunskii, O. I. (1979). Theory of Combustion of a Boron Particle in Oxygen in High-Temperature Environment. Combustion, Explosion, and Shock Waves, 15 (6), 691-698.
171. Grigoriev, V. G., Zarko, V. E., and Karasev, V. V. (1979). Aluminum Agglomeration in Combustion of Model AP-Based Compositions. Proceedings of the 13th Conference on Evaporation, Combustion and Gas Dynamics of Dispersed Systems, (pp. 42, 43). Odessa, Russia.
172. Grosse, A. V., and Conway, J. B. (1958). Combustion of Metals in Oxygen. Ind. Eng. Chem., 50 (4), 663-672.
173. Guirao, C., and Williams, F. A. (1971). A Model of Ammonium Perchlorate Deflagration between 20 and 100 Atm. AIAA Journal, 9 (7), 1,345-1,356.
174. Gurevich, M. A., Kir'yanov, I. M., and Ozerov, E. S. (1969). Combustion of Individual Boron Particles. Combustion, Explosion, and Shock Waves, 5 (2), 150-153.
175. Hanson-Parr, D., and Parr, T. (1994). RDX Flame Structure. Twenty-Fifth Symposium (International) on Combustion, pp. 1,635-1,643.
176. Heller, C. A., and Gordon, A. S. (1955). Structure of the Gas Phase Combustion Region of a Solid Double Base Propellant. Journal of Physical Chemistry, 59 (8), 773-777.
177. Henderson, U. V., Woods, H. P., and Poplin, G. (1963). The Combustion of Elemental Boron with Fluorine. Final Report, Texaco Experiment, Inc., Richmond, VA.
178. Henson, B. F., Smilowitz, L., Asay, B. W., and Dickson, P. M., (2002). The Beta-Delta Phase Transition in the Energetic Nitramine Octahydro-1,3,5,7-Tetranitro-1,3,5,7-Tetrazocine: Thermodynamics. Journal of Chemical Physics, 117 (8), p. 3,780.
179. Hessler, R. O. and Glick, R. L. (1998). A Ballistic Prediction for Burning Rate Motors with Non-Instantaneous Burnout. Memorandum on IRandD in support of NATO RTO WG 016.
180. Hessler, R. O. and Glick, R. L. (2000). Error Analysis of Burning-Rate Measurement Procedures. Combustion, Explosions and Shock Waves, 36 (1), 96-107.
181. Hiers, R. S. (2000). Critical Behavior in Small Particle Combustion. J. Thermophys. Heat. Transfer, 14, 53-58.
182. Hintz, P. A., Ruatta, S. A., and Anderson, S. L. (1990). Interaction of Boron Cluster Ions with Water: Single Collision Dynamics and Sequential Etching. Journal of Chemical Physics, 92, 292.
183. Hirschfelder, J. O. (1957). Heat Conductivity in Polyatomic, Electronically Excited, or Chemically Reacting Mixtures. 6th Symposium (International) on Combustion, 6, pp. 351-366.
184. Hirschfelder, J. O., Curtiss, C. F., and Bird, R. B. (1964). Molecular Theory of Gases and Liquids. New York: John Wiley and Sons.
185. Holl, J. T., Turns, S. R., Solomon, A. S., and Faeth, G. M. (1986). Ignition and Combustion of Boron Slurry Agglomerates. Combustion Science and Technology, 45 (3-4), 147-166.
186. Homan, B. E., Devynk, D., and Reeves, G. P. (2005). Arl, Rpd-380 Unpublished Experimental Micro-Closed Bomb Burning Rate Results. Private Communication from Homan.
187. Hsieh, W. H., and Yeh, C. L. (1993). Approach to the Measurement of Burning-Surface Temperature of Boron. Journal of Propulsion and Power, 9 (1), 157-160.
188. Inghram, M. G., Porter, R. F., and Chupka, W. A. (1956). Mass Spectrometric Study of Gaseous Species in the B-B2O3 System. J. Chem. Phys., 25 (3), 498-502.
189. Ivanov, G. V., and Tepper, F. (1997). Activated Aluminum as a Stored Energy Source for Propellants. In K. K. Kuo (ed.), Challenges in Propellants and Combustion 100 Years after Nobel, pp. 636-645. New York: Begell House.
190. Jeromin, L. O. (1966). An Experimental Investigation of the Compressible Turbulent Boundary Layer with Air Injection. A.R.C., 28, 549.
191. Jigatch, A. N., Leipunsky, I. O., and Kuskov, M. L. (2002). ATechnique to Prepare Aluminized Nanosized Explosives. Proc. of 29th Int. Pyrotech. Sem. Westminster, Colorado.
192. Jigatch, A. N., Leypunskii, I. O., and Kuskov, M. L. (2002). Synthesis of the Coatings on the Surface of Ultra-Fine Aluminum Particles. Khemicheskaia fizika, 21 (4), 72-78.
193. Jigatch, A. N., Leipunsky, I. O., Kuskov, M. L., Pshechenkov, P. A., Laritchev, M. N., Krasovsky, V. G., et al. (2002). A Technique to Prepare Aluminized Nanosized Energetic Composition. AIAA Paper.
194. Johnson, D. S. (1959). Velocity and Temperature Fluctuations in a Turbulent Boundary Layer Downstream of a Stepwise Disontinuity in Wall Temperature. Journal of Applied Mechanics, 26, 325.
195. Kanda, F. A., King, A. J., Russell, V. A., and Katz, W. (1956). Preparation of Boron Monoxide at High Temperatures. J. Am. Chem. Soc., 78 (7), 1509-1510.
196. Kanury, A. M. (1978). The Science and Engineering of Hostile Fires. NAS/NRC Fire Research Abstracts and Reviews.
197. Karpowicz, R. J., and Brill, T. B. (1982). The Beta-Gama Transformation of HMX: Its Thermal Analysis and Relationship to Propellants. AIAA Journal, 20 (11), pp. 1,586-1,591.
198. Kee, R. J., Grcar, J. F., Smooke, M. D., and Miller, J. (1985). A Fortran Program for Modeling Steady, Laminar, One-Dimensional, Premixed Flames. Rep. SAND85-8240, Sandia National Lab.
199. Keil, D. G., Dreizin, E. D., Calcote, H. F., Feider, W., and Hoffman, V. K. (1995). Magnesium Coating Effects in Boron Combustion. Eastern States Section Meeting, pp. 329-332. Pittsburgh, PA: The Combustion Institute.
200. Keil, D. G., Dreizin, E. L., Hoffman, V. K., and Calcote, H. F. (1997). Enhanced Combustion of Boron Clouds Using Mixed O2/NF3 Oxidizers. JANNAF Meeting. West Palm Beach, FL.
201. Kemenov, K. A., and Menon, S. (2006). Explicit Small-Scale Velocity Simulation for High-Re Turbulent Flows. Journal of Computational Physics, 220 (1), 290-311.
202. Kendall, R. M., Bartlett, E. P., Rindal, R. A., and Moyer, C. B. (1967). An Analysis of the Coupled Chemically Reacting Boundary. Aero Therm Corp., Rept. 66-7.
203. Kendall, R. M., Rubesin, M. W., Dahn, T. J., and Mendenhall, M. R. (1964). Mass, Momentum, and Heat Transfer Within a Turbulent Boundary Layer with Foreign Gas Mass Transfer at the Surface. Part I-Constant Fluid Properties. Final Report, Itek Corporation, Vidya Division.
204. Keswani, S. T., Andiroglu, E., Campbell, J. D., and Kuo, K. K. (1985). Recession Behavior of Graphitic Nozzles in Simulated Rocket Motors. Journal of Spacecraft and Rockets, 22 (4), 396-397.
205. Keswani, S. T., and Kuo, K. K. (1986). Validation of an Aerothermochemical Model for Graphite Nozzle Recession and Heat Transfer Processes. Combustion Science and Technology, 47 (3-4), 177-192.
206. Kim, J. S., de Ris, J., and Kroesser, F. W. (1971). Laminar Free Convective Burning of Fuel Surfaces. Thirteenth Symposium (International) on Combustion, 13, 949-961.
207. Kim, T. J., Yetter, R. A., and Dryer, F. L. (1994). New Results on Moist Co Oxidation: High Pressure, High Temperature Experiments and Comprehensive Kinetic Modeling. Twenty-Fifth Symposium (International) on Combustion, 25, pp. 759-766. Pittsburgh, PA: The Combustion Institute.
208. King, M. K. (1972). Boron Ignition and Combustion in Air-Augmented Rocket Afterburners. Combustion Science and Technology, 5 (1), 155-164.
209. King, M. K. (1974). Boron Particle Ignition in Hot Gas Streams. Combustion Science and Technology, 8 (5 and 6), 255-273.
210. King, M. K. (1979). Modeling of Single Particle Aluminum Combustion in CO2-N2 Atmospheres. Seventeenth Symposium (International) on Combustion, 17, pp. 1,317-1,328. Pittsburgh, PA: The Combustion Institute.
211. King, M. K. (1982a). Single Particle Boron Ignition Modeling. 19th JANNAF Combustion Meeting. CPIA Pub 366 (2), pp. 27-42.
212. King, M. K. (1982b). Ignition and Combustion of Boron Particles and Clouds. Journal of Spacecraft and Rockets, 19, 294-306.
213. King, M. K. (1989). Modification of Boron Ignition Model to Include Recent Liquid Boron Oxide-Water Gas Kinetics. 26th JANNAF Combustion Meeting, pp. 203-207. CPIA Pub 529 (2).
214. King, M. K. (1993a). A Review of Studies of Boron Ignition and Combustion Phenomena at Atlantic Research Corporation Over the Past Decade. International Journal of Energetic Materials and Chemical Propulsion, 2 (1-6), 1-80.
215. King, M. K. (1993b). Combustion of Boron-Based Propellants and Solid Fuels. (K. Kuo and R. Pein, eds.) Boca Raton, FL: Begell-House Publishing Co. and CRC Press, Inc.
216. Klager, K. (1977). The Interaction of the Efflux of Solid Propellants with Nozzle Materials. Propellants and Explosives, 2, 55-63.
217. Klebanoff, P. (1955). Characteristics of Turbulence in a Boundary Layer with Zero Pressure Gradient. NACA Report 1247.
218. Komar, J. J., Taylor, G. L., and King, M. K. (1984). Diagnostics of Single Particle Boron Combustion. AIAA 21st Aerospace Sciences Meeting, pp. 10-13, Reno, NV.
219. Kooker, D. E., and Nelson, C. W. (1977). Numerical Simulation of Solid Propellant Transient Combustion. The Heat Transfer Division of the ASME, 77-HT-17.
220. Kooker, D. E., and Zinn, B. T. (1974). Numerical Investigation of Non-Linear Axial Instabilities in Solid Rocket Motors. BRL Contract Report No. 141.
221. Korkegi, H. (1956). Transition Studies and Skin-Friction Measurements on an Insulated Flat Plate at a Mach Number of 5.8. J. Aeron. Science, 23, 97-107.
222. Korobeinichev O. P. (2000). Flame Structure of Solid Propellants, In Yang, V., Brill T. B., and Ren W. Z. (eds.), Solid Propellant Chemistry, Combustion, and Motor Interior Ballistics, Progress of Astronautics and Aeronautics of AIAA, 185, pp. 335-354.
223. Korobeinichev, O. P., Kuibida, L. V., Orlov, V. N., Tereshchenko, A. G., Kutsenogii, K. P., and Mavliev, R. A., Emel'yanov, I. D., Ermolin, N. E., Fomin, V. M., (1985). Mass Spectrometric Probe Study of the Flame Structure and Kinetics of Chemical Reactions in Flames. In V. L. Tal'roze (ed.), Mass-Spektrom. Khim. Kinet. (in Russian) pp. 73-93.
224. Kosdon, F. J., Williams, F. A., and Buman, C. (1969). Combustion of Vertical Cellulosic Cylinders in Air. Twelfth Symposium (International) on Combustion, 12, 253-264.
225. Krien, G., Licht, H. H., and Zierath, J. (1973). Thermochemische untersuchungen an nitraminen. Thermochimica Acta, 6 (5), 465-472.
226. Krier, H. (1972). Solid Propellant Burning Rate During a Pressure Transient. Combustion Science and Technology, 5, 69-73.
227. Krier, H. and Adams, M. J. (1979). An Introduction to Gun Interior Ballistics and a Simplified Ballistic Code. In Interior Ballistics of Guns, ed. Herman Krier and Martin Summerfield, (eds.), vol. 6 of Progress in Astronautics and Aeronautics, pp. 1-36.
228. Krier, H., Burton, R. L., Pirman, S. R., and Spalding, M. J. (1995). Shock Initiation of Crystalline Boron in Oxygen and Fluorine Compounds. AIAA 95-2120, Thirtieth AIAA Thermophysics Conference. San Diego, CA.
229. Krier, H., Burton, R. L., Pirman, S. R., and Spalding, M. J. (1996). Shock Initiation of Crystalline Boron in Oxygen and Fluorine Compounds. Journal of Propulsion and Power, 12 (4), 672-679.
230. Krier, H., Burton, R. L., Spalding, M. J., and Rood, T. J. (1998). Ignition Dynamics of Boron Particles in a Shock Tube. Journal of Propulsion and Power, 14 (2), 166-172.
231. Krier, H., Rajan, S., and Van Tassell, W. F. (1976). Flame Spreading and Combustion in Packed Beds of Propellant Grains, AIAA J., 14 (3), 301-309.
232. Krier, H., T'ien, J. S., Sirignano, W. A., and Summerfield, M. (1968). Nonsteady Burning Phenomena of Solid Propellants: Theory and Experiments. AIAA Journal, 6 (2), 278-285.
233. Kubota, N. (1984). Survey of Rocket Propellants and Their Combustion Characteristics. In K. K. Kuo, and M. Summerfield (eds.), Fundamentals of Solid-Propellant Combustion (vol. 90, pp. 1-52). New York, NY: AIAA.
234. Kubota, N., Ohlemiller, T. J., Caveny, L., and Summerfield, M. (1974). Site and Mode of Action of Platonizers in Double-Base Propellants. AIAA Journal, 12 (12), 1,709-1,714.
235. Kudryavtsev, V. M., Sukhov A. V., Voronetskii A. V. and Shapara A. P. (1979). High-Pressure Combustion of Metals (Three-Zone Model), Combustion, Explosion and Shock Waves, 15 (6), 731-737.
236. Kuehl, D. K. (1965). Ignition and Combustion of Aluminum and Beryllium. AIAA Journal, 3 (12), 2,239.
237. Kuo, K. K. (2005). Principles of Combustion (2nd ed.). Hoboken, NJ: John Wiley and Sons.
238. Kuo K. K. and Acharya R. (2012). Fundamentals of Turbulent and Multiphase Combustion. Hoboken, NJ: John Wiley and Sons.
239. Kuo, K. K. and Coates, G. R. (1976). Review of Dynamic Burning of Solid Propellants in Gun and Rocket Propulsion Systems. 16th Symposium (International) on Combustion (pp. 1,117-1,192). Pittsburgh, PA: The Combustion Institute.
240. Kuo, K. K., Gore, J. P., and Summerfield, M. (1984). Transient Burning of Solid Propellants. In K. K. Kuo, and M. Summerfield (eds.), Fundamentals of Solid-Propellant Combustion, 90, 599-659.
241. Kuo, K. K. and Keswani, S. T. (1985). A Comprehensive Theoretical Model for Carbon-Carbon Composite Nozzle Recession. Combustion Science and Technology, 42 (3-4), 145-164.
242. Kuo, K. K., Koo, J. H., Davis, T. R., and Coates, G. R. (1976). Transient Combustion in Mobile Gas-Permeable Propellants, ACTA Astronautics, 3 (7), 573-591.
243. Kuo, K. K., Lu, Y. C., and Tseng, Y. S. (1997). Modeling and Numerical Simulation of Physicochemical Processes Occuring in the Two-Phase Foam Layer of Burning RDX. In Challenges in Propellants and Combustion 100 Years after Nobel, pp. 1,133-1,145. Redding, CT: Begell House Inc.
244. Kuo, K. K., Martin, H. T., and Boyer, J. E. (2011). Detailed Ballistic Performance Characterization of 120-mm Mortar System with Different Flash Tube Configurations, Proceedings of 26th International Ballistics Symposium, 1, pp. 794-805.
245. Kuo, K. K. and Pein, R. (eds.). (1993). Combustion of Boron-Based Solid Propellants and Solid Fuels, Boca Raton, FL: CRC Press/Begell House.
246. Kuo, K. K., Risha, G. A., Evans, B. J., and Boyer, E. (2003). Potential Usage of Energetic Nano-sized Powders for Combustion and Rocket Propulsion. Mat. Res. Soc. Symp. Proc., 800, pp. AA1.1.1-AA1.1.12.
247. Kuo, K. K., and Summerfield, M. (1974) Theory of Steady-State Burning of Gas-Permeable Propellants, AIAA Journal, 12 (1), 49-56.
248. Kuo, K. K., and Summerfield, M. (eds.). (1984). Fundamentals of Solid Propellant Combustion. New York: AIAA.
249. Kuo, K. K., and Zhang, B. (2006). Transient Burning Characteristics of Ja2 Propellant Using Experimentally Determined Zeldovich Map. Journal of Propulsion and Power, 22 (2), 455-461.
250. Laderman, A. J. (1978). Effects of Wall Temperature on a Supersonic Turbulent Boundary Layer. AIAA Journal, 16 (7), 723-729.
251. Laderman, A. J., and Demetriades, A. (1979). Turbulent Shear Stresses in Compressible Boundary Layers. AIAA Journal, 17 (7), 736-744.
252. Laidler, K. J. (1987). Chemical Kinetics (3rd ed.). New York: Harper & Row.
253. Landers, A. G., and Brill, T. B. (1980). Pressure-Temperature Dependence of the Beta-Delta Polymorph Interconversion in Octahydro-1,3,5,7-Tetranitro-1,3,5,7-Tetrazocine. Journal of Physical Chemistry, 84 (26), 3573-357.
254. Laufer, J. (1954). The Structure of Turbulence in Fully Developed Pipe Flow. NACA TR 1174.
255. Launder, B. E., and Spalding, D. B. (1972). Mathematical Models of Turbulence. New York: Academic Press.
256. Law, C. K. (1973). A Simplified Theoretical Model for the Vapor-Phase Combustion of Metal Particles. Combustion Science and Technology, 7 (5), 197-212.
257. Lee, Y. J., Tang, C.-J., and Litzinger, T. A. (1999). A Study of the Chemical and Physical Processes Governing CO2 Laser-Induced Pyrolysis and Combustion of RDX. Combustion and Flame, 117, 600-628.
258. Lees, L. (1956). Laminar Heat Transfer Over Blunt-Nosed Bodies at Hypersonic Flight Speeds. Jet Propulsion, 26 (4), 259-269.
259. Lees, L. (1958). Convective Heat Transfer with Mass Addition and Chemical Reactions. Combustion and Propulsion, Third Agard Colloquim (p. 451). London: Pergamon Press.
260. Leibu, I., Gany, A., and Netzer, D. W. (1995). Diffusion Paths in Boron/Titanium Reaction Systems. Proceedings of the 8th international Symposium on Transport Phenomena in Combustion (Istp8), pp. 1,485-1,496. San Francisco, CA.
261. Leider H. R. and Seaton, D. L. (1979). Nitrate Ester Decomposition and Degradation of Molecular Weight in Nitrocellulose from Thermal Decomposition of PBX-9404 Below 100C. UCRL-52776. Lawrence Livermore National Laboratory, Livermore, CA.
262. Lengelle, G., Bizot, A., Duterque, J., and Trubert, J. F. (1984). Steady-State Burning of Homogeneous Propellants. in K. K. Kuo, and M. Summerfield (eds.), Fundamentals of Solid Propellant Combustion, 90, 361-407.
263. Lenoir, J. and Robillard, G. (1957). A Mathematical Method to Predict the Effects of Erosive Burning in Solid-Propellant Rockets. Sixth Symposium (International) on Combustion, pp. 663-667. New York: Reinhold.
264. Levine, J. N., and Culick, F. C. (1974). Nonlinear Analysis of Solid Rocket Combustion Instability. AFRPL Tr-74-45.
265. Levitas V. I., Smilowitz L. B., Henson B. F., Asay B.W. (2006). Interfacial and Volumetric Kinetics of the Phase Transition in the Energetic Nitramine Octahydro-1,3,5,7-Tetranitro-1,3,5,7-Tetrazocine Based on the Virtual Melting Mechanism. Journal of Chemical Physics, 124 (2), 026101.
266. Li, S. C. (1991). Optical Measurement of Size Histories of Boron Particles in Ignition and Combustion Stages. Combustion Science and Technology, 77 (1-3), 149-169.
267. Li, S. C., and Williams, F. A. (1990). Ignition and Combustion of Boron in Wet and Dry Atmosphere. Twenty-third Symposium (International) On Combustion. The Combustion Institute (Pittsburgh, PA), 23, 1,147-1,154.
268. Li, S. C., and Williams, F. A. (1993). Combustion of Boron-Based Propellants and Solid Fuels. (K. K. Kuo, and R. Pein, eds.). Boca Raton, FL: Begell House/CRC Press.
269. Li, S. C., Williams, F. A., and Margolis, S. B. (1990). Effects of Two-Phase Flow in a Model for Nitramine Deflagration. Combustion and Flame, 80 (3-4), 329-349.
270. Li, S. C., Williams, F. A., and Takahashi, F. (1988). An Investigation of Combustion of Boron Suspensions. Twenty-Second Symposium (International) on Combustion, 22 (1), pp. 1,951-1,960. Pittsburgh, PA: The Combustion Institute.
271. Liang, Y. and Beckstead, M. W. (1998) Numerical Simulation of Unsteady, Single Aluminum Particle Combustion in Air. AIAA Paper 98-3825, 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit July 13-15, 1998/Cleveland, OH.
272. Liau, Y.-C., Kim, E. S., and Yang, V. (2001). A Comprehensive Analysis of Laser-Induced Ignition of RDX Monopropellant. Combustion and Flame, 176 (3-4), 1,680-1,698.
273. Liau, Y.-C., and Yang, V. (1995). Analysis of RDX Monopropellant Combustion with Two-Phase Subsurface Reactions. Journal of Propulsion and Power, 11 (4), 729-739.
274. Libby, P. A. (1980). Ignition, Combustion, and Extinction of Carbon Particles. Combustion and Flame. 38 (3), 285-300.
275. Libby, P. A., and Blake, T. R. (1981). Burning Carbon Particles in the Presence of Water Vapor. Combustion and Flame, 41, 123-147.
276. Liburdy, J. A., and Faeth, G. M. (1975). Theory of a Steady Laminar Thermal Plume along a Vertical Adiabatic Wall. Lett. Heat and Mass Transfer, 2, 407-418.
277. Liburdy, J. A., and Faeth, G. M. (1978). Heat Transfer and Mean Structure of a Turbulent Thermal Plume along Vertical Isothermal Wall. ASME Journal of Heat Transfer, 100 (2), 177-183.
278. Liburdy, J. A., Groff, E. G., and Faeth, G. M. (1979). Structure of a Turbulent Thermal Plume Rising along an Isothermal Wall. Trans. ASME, Series C, Journal of Heat Transfer, 101 (2), 249-255.
279. Lin, S. C., and Teare, J. D. (1962). Rate of Ionization Behind Shock Waves in Air. II Theoretical Interpretation. Technical Report, Avco Corp. Avco-Everett Research Lab, Everett, Mass.
280. Liu, T. K., Shyu, I. M., and Hsia, Y. S. (1996). Effect of Fluorinated Graphite on Combustion of Boron and Boron-Based Fuel-Rich Propellants. Journal of Propulsion and Power, 12 (1), 26-33.
281. Llewellyn, I. P., Fontijn, A., and Clyne, M. A. (1981). Kinetics of the Reaction NO + O2 → BO2 + O. Chemical Physics Letters, 84 (3), 504-508.
282. Lobb, R. K., Winkler, E. M., and Persh, J. (1955). Experimental Investigation of Turbulent Boundary Layers in Hypersonic Flow. NOVORD Rept. 3880.
283. Lockwood, F. C. (1977). The Modeling of Turbulent Premixed and Diffusion Combustion in the Computation of Engineering Flows. Combustion and Flame, 29 (2), 111-122.
284. Lockwood, F. C., and Naguib, A. S. (1975). The Prediction of the Fluctuations in the Properties of Free, Round-Jet, Turbulent, Diffusion Flames. Combustion and Flame, 24 (1), 109-124.
285. Lockwood, F. C., and Ong, P. H. (1972). Study of Combined Free and Forced Convection Turbulent Boundary Layer with Variable Fluid Properties and Chemical Reaction. In Z. Z. N. Afgan (ed.), Heat and Mass Transfer in Boundary Layers, 1, 339-340.
286. Louwers, J. (2000). Combustion and Decomposition of Hydrazinium Nitroformate (Hnf) and Hnf Propellants. Ph.D. Thesis, Universiteit Delft, Delft.
287. Louwers, J., and Van Der Heijden, A. E. (1999). Hydrazinium Nitroformate Based High Performance Solid Propellants. Patent No. Wo 99/59940. International Patent.
288. Low, G. M. (1973). Hydrazinium Nitroformate Propellant with Saturared Polymeric Hydrocarbon Binder. U.S. Patent No. 3,708,359.
289. Ludweig, H. (1956). Bestimmung des Verhaltnisses der Austauschkoeffizienten für Wärme und Impuls bei Turbulenten Grenz-schichten. Z. Flugwiss., 5, 73.
290. Maček, A. (1972). Combustion of Boron Particles: Experiment and Theory. Fourteenth Symposium (International) on Combustion, 14, pp. 1,401-1,411. Pittsburgh, PA: The Combustion Institute.
291. Maček, A., and Semple, J. M. (1969). Combustion of Boron Particles at Atmospheric Pressure. Technical rept., Purdue University Lafayette Ind. Project SQUID Headquarters.
292. Maček, A., and Semple, J. M. (1971). Combustion of Boron Particles at Elevated Pressures. Thirteenth Symposium (International) on Combustion, 13, pp. 859-868. Pittsburgh, PA: The Combustion Institute.
293. Maggi, F., Bandera, A., and DeLuca, L. (2010). Approaching Solid Propellant Heterogeneity for Agglomerate Size Prediction, AIAA-2010-6751.
294. Maharrey, S., and Behrens, R. (2005). Thermal Decomposition of Energetic Materials 5. Reaction Processes of 1,3,5-Trinitrohexahydro-S-Triazine below Its Melting Point. Journal of Physical Chemistry, 109 (49), 11,236-11,249.
295. Makino, A., and Law, C. K. (1988). A Simplified Model for the Combustion of Uncoated Boron Particles. Combustion Science and Technology, 61 (4-6), 155-168.
296. Marble, F. E., and Adamson, J. T. (1954). Ignition and Combustion in a Laminar Mixing Zone. Jet Propulsion, 24 (2), 85-94.
297. Marion, M., Chauveau, C., and Gokalp, I. (1995). Studies on the Ignition and Burning of Aluminum Particles, AIAA 95-2861.
298. Marion, M., Chauveau, C., and Gokalp, I. (1996). Studies on the Ignition and Burning of Aluminum Particles. Combustion Sci. and Technology, 116, 369-390.
299. Marklund, T. and Lake, A. (1960). Experimental Investigation of Propellant Erosion. Am. Rocket Soc. J., 3 (2), 173-178.
300. Markstein, G. H., and de Ris, J. (1973). Upward Fire Spread over Textiles. 14th Symposium (International) on Combustion, 14, pp. 1,085-1,097.
301. Marxman, U. A. (1965). Combustion in the Turbulent Boundary Layer on a Vaporizing Surface. Tenth Symposium (International) on Combustion, 10, pp. 1,337-1,349.
302. Mason, H. B. and Spalding, D. B. (1973). Prediction of Reaction Rates in Turbulent Premixed Boundary Layer Flows. First European Symposium, 601-606.
303. Mayberry, J. L., Kordig, J. W., Zeamer, R. J., and Browning, S. C. (1968). Correlation of Graphite Nozzle Throat Erosion in Solid-Rocket Motors. AIAA Journal, 6 (11), 2,222-2,224.
304. McBride, B. J. and Gordon, S. (1996). Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. User's Manual and Program Description. NASA Reference Publication-1311, Lewis Research Center, National Aeronautics and Space Administration, Cleveland, OH.
305. McCloskey, A. L., Brotherton, R. J., and Boone, J. L. (1961). The Preparation of Boron Monoxide and its Conversion to Diboron Tetrachloride. J. Am. Chem. Soc., 83 (23), 4,750-4,754.
306. McCrone, W. C. (1950). Crystallographic Data. 32. RDX (cyclotrimethylenetrinitramine). Analytical Chemistry, 22 (7), 954-955.
307. McDonald, A. J., and Hedman, P. O. (1965). Erosion of Graphite in Solid-Propellant Combustion Gases and Effects on Heat Transfer. AIAA Journal, 3 (7), 1,250-1,257.
308. Meinköhn, D. (1985). The Ignition of Boron Particles. Combustion and Flame, 59 (3), 225-232.
309. Melcher, J. C., Burton R. L. and Krier H. (1999). Combustion of Aluminum Particles in Solid Rocket Motor Flows. 36th JANNAF Combustion Meeting, vol. I, CPIA #691, 249-258.
310. Melcher, J. C., Krier, H., and Burton R. L. (2002). Burning Aluminum Particles inside a Laboratory-Scale Solid Rocket Motor. Journal of Propulsion and Power, 18, 631-640.
311. Melius, C. F. (1988). The Gas-Phase Flame Chemistry of Nitramine Combustion. 25th JANNAF Combustion Meeting. Publication 498, Vol. II, pp. 155-161, Huntsville, AL: CPIA.
312. Melius, C. F. (1990). Thermochemical Modeling II. Application to Ignition and Combustion of Energetic Materials. In S. Bulusu (ed.), Chemistry and Physics of Energetic Materials, pp. 51-78.
313. Melius, C., and Binkley, J. (1986). Thermochemistry of the Decomposition of Nitramines in the Gas Phase. Twenty-First Symposium (International) on Combustion, 1,953-1,963.
314. Mench, M. M., Kuo, K. K., Yeh, C. L., and Lu, Y. C. (1998). Comparison of Thermal Behavior of Regular and Ultra-fine Aluminum Powders (Alex) Made from Plasma Explosion Process, Combustion Science and Technology, 135 (1-6), 269-292.
315. Meyer, G. H. (1973). Initial Value Methods for Boundary Value Problems. In R. Bellman (ed.), Theory and Application of Invariant Imbedding, vol. 100. New York: Academic Press.
316. Miller, P. J., Block, S., and Piermarini, G. J. (1991). Effects of Pressure on the Thermal Decomposition Kinetics, Chemical Reactivity and Phase Behavior of RDX. Combustion and Flame, 83 (1-2), 174-184.
317. Miller, M. S. (1996). Combustion Model Development for Interior Ballistic Applications. Aro Combustion Modeling Workshop.
318. Miller, M. S., and Anderson, W. R. (2000). Energetic Material Combustion Modeling with Elementary Gas-Phase Reactions: a Practical Approach. In V. Yang, T. B. Brill, and W. Z. Ren (eds.), Solid Propellant Combustion Chemistry, Combustion, and Motor Interior Ballistics, 185, 501-531. Reston, VA: AIAA.
319. Miller, M. S., and Anderson, W. R. (2004). Burning-Rate Predictor for Multi-Ingredient Propellants: Nitrate-Ester Propellants. Journal of Propulsion and Power, 20 (3), 440-454.
320. Miller, W. H., and Barrington, D. K. (1970). A Review of Contemporary Solid Rocket Motor Performance Prediction Techniques. Journal of Spacecraft and Rockets, 7, 225.
321. Miziolek, A. (2002). Nanoenergetics: An Emerging Technology Area of National Importance. Amptiac Quarterly, 6 (1), 43-48.
322. Mohan, G., and Williams, F. A. (1972). Ignition and Combustion of Boron in O2/Inert Atmospheres. AIAA Journal, 10 (6), 776-783.
323. Morgan, C. U., and Beyer, R. A. (1979). Electron Spin Resonance Studies of HMX Pyrolysis Products. Combustion and Flame, 36, 99-101.
324. Mueller, D. C., Scott, M. J., and Turns, S. R. (1991). Secondary Atomization of Aluminum/RP-1 Liquid Rocket Slurry Fuels. AIAA/NASA/OAI Conference on Advanced SEI Technologies. Cleveland, OH.
325. Neoh, K. D., Howard, J. D., and Sarofim, A. F. (1981). Soot Oxidation in Flames. In D. C. Siegla, and G. W. Smith (eds.), Particulate Carbon Formation During Combustion, 162-282. New York: Plenum Press.
326. Nielsen, A. (1988). Caged Nitramine Compound. Patent No. U.S. Patent 5693794.
327. Nies, N. P., and Campbell, G. W. (1964). Boron, Metallo-Baron Compounds and Boranes. (R. M. Adams, ed.) New York: John Wiley and Sons.
328. Novozhilov, B. V. (1992). Theory of Nonsteady Burning and Combustion Stability of Solid Propellants by the Zeldovich-Novozhilov Method. in L. De Luca, E. W. Price, and M. Summerfield (eds.), Nonsteady Burning and Combustion Stability of Solid Propellants, AIAA, 143, 601-641.
329. Nunner, W. (1956). Heat transfer and pressure drop in rough pipes. VDI-Forschungsheft, 455, 5-39.
330. Nusca, M. (1999). Computational Fluid Dynamics Model of Multiphase Flows Applied to Solid Propellant Combustion in Gun Systems. Proceedings of the 18th International Symposium on Ballistics, pp. 252-261. San Antonio, TX.
331. Nusca, M., and Gough, P. (July 1998). Numerical Model of Multiphase Flows Applied to Solid Propellant Combustion in Gun Systems. AIAA Paper No. 1998-3695.
332. Nusca, M., and Horst, A. (2003). Progress in Multidimensional Two-Phase Simulations of Notional Telescoped-Ammunition Propelling Charge. Proceedings of the 39th JANNAF Combustion Subcommittee Meeting. Colorado Springs, CO: CPIA Publ. JSC CD-25.
333. Oberle, W. F. and Kooker, D. E. (1993). BRLCB: a Closed-Chamber Data Analysis Program Part I--Theory and User's Manual. ARL-TR-36, Army Research Lab.
334. Olsen, S. E. and Beckstead M. W. (1996). Burn Time Measurements of Single Aluminum Particles in Steam and Carbon Dioxide Mixtures. J. of Propulsion and Power, 12 (4), 662-671.
335. Orloff, L., de Ris, J., and Markstein, G. H. (1974). Upward Turbulent Fire Spread and Burning of Fuel Surface. Fifteenth Symposium (International) on Combustion, 15, 183-192.
336. Orloff, L., Modak, A. T., and Alpert, R. L. (1977). Burning of Large-Scale Vertical Surfaces. Sixteenth Symposium (International) on Combustion, 16, 1345-1354.
337. Pagni, P. J., and Shih, T. M. (1976). Excess Pyrolyzate., h Symposium (International) on Combustion, 16, 1,329-1,343.
338. Pagni, P. J., and Shih, T. M. (1977). Wake Turbulent Flames. ASME Paper 77-HT-97, ASME/AIChE 17th National Heat Transfer Conference, Salt Lake City, Utah.
339. Papalexandris, M. V. (2004). Numerical Simulations of Detonations in Mixtures of Gases and Solid Particles. J. Fluid Mech. 507, pp. 95-142
340. Parr, T., Johnson, C., Hanson-Parr, D., Higa, K., and Wilson, K. (2003). Evaluation of Advanced Fuels for Underwater Propulsion. 39th JANNAF Combustion Subcommittee Meeting.
341. Pasternack, L. (1992). Gas-Phase Modeling of Homogeneous Boron/Oxygen/Hydrogen/Carbon Combustion. Combustion and Flame, 90 (3-4), 259-268.
342. Patankar, S. V. (1980). Numerical Heat Transfer and Fluid Flow. Washington, DC: Hemisphere Publishing Corporation.
343. Patankar, S. V., and Spalding, D. B. (1970). Heat and Mass Transfer in Boundary Layer (2nd ed.). London: Morgan-Grampian.
344. Paul, B. E., Levine, R. L., and Fong, L. Y. (1964). A Realistic Explanation of the Ignition Pressure Peak. AIAA Paper No. 64-121.
345. Peterson, J. B., McRee, J. D., Adcock, J. B., and Braslow, A. L. (1966). Further Investigation of Effect of Air Injection Through Slots and Porous Surfaces on Flat-Plate Turbulent Skin Friction at Mach 3. NASA TN-D-331.
346. Plett, F. G., Alkidas, A. C., Shrader, R. E., and Summerfield, M. (1975). Erosion of Metals by High Pressure Combustion Gases: Inert and Reactive Erosion. ASME J. Heat Transfer, 97 (1), 110-115.
347. Plumb, O. A., and Kennedy, L. A. (1976). Prediction of Buoyancy Controlled Turbulent Wall Diffusion Flames. 16th Symposium (International) on Combustion, 16, 1699-1707.
348. Pokhil, P. M., Logachev, V. S., and Maltsev, V. M. (1972). Combustion of Metallized Condensed Systems. Inst. of Chemical Physics of USSR Academy, Moscow.
349. Powers, J. M., Stewart, D. S, and Krier, H. K. (1990). Theory of Two-Phase Detonation-Part II: Modeling. Combust. Flame 80, 264-279.
350. Prasad, K., Yetter, R. A. and Smooke, M. D. (1997). An Eigenvalue Method for Computing the Burning Rates of RDX Propellants. Combustion Science and Technology,. 124, 3,582.
351. Preckel, R. F. (1948). Ballistics of Catalyst-Modified Propellants. Bulletin of Fourth Meeting of the Army-Navy Solid Propellant Group, pp. 67-71. Illinois Institute of Technology, Chicago: Armour Research Foundation.
352. Preckel, R. F. (1965). Plateau ballistics in nitrocellulose propellants. AIAA Journal, 3, 346-347.
353. Prentice, J. L. (1974). Combustion of Laser-Ignited Aluminum Droplets in Wet and Dry Oxidizers, AIAA 12th Aerospace Sciences Meeting, AIAA Paper No. 74-146.
354. Price, E. W. (1984). Fundamentals of Solid-Propellant Combustion. In K. K. Kuo, and M. Summerfield (eds.), Progress in Astronautics and Aeronautics. New York: American Institute of Aeronautics and Astronautics.
355. Price, E. W., Christensen, H. C., Knipe, R. H., Drew, C. M., Prentice, J. L., and Gordon, A. S. (1966). Aluminum Particle Combustion Progress Report, NOTS-TP-3916, Naval Ordnance Test Station, China Lake, CA.
356. Radford, A. T. (2003). Data on RPD-380 and RPD-351, 1995. Private communication from D.A. Worrell, ATK Radford, to A.L. Brant, ARL.
357. Ray H.S. (1982). The Kinetic Compensation Effect in the Decomposition of Calcium Carbonate. Journal of Thermal Analysis, 24, 35-41.
358. Razdan, M. K., and Kuo, K. K. (1979). Erosive Burning Study of Composite Solid Propellants by Turbulent Boundary-Layer Approach. AIAA Journal, 17 (11), 1225.
359. Razdan, M. K., and Kuo, K. K. (1980). Measurements and Model Validation for Composite Propellants Burning under Cross Flow of Gases. AIAA Journal, 18 (6), 669-677.
360. Reid, R. C., Prausnitz, J. M., and Poling, B. E. (eds.). (1986). The Properties of Gases and Liquids (4th ed.). New York: McGraw-Hill.
361. Risha, G. A., Son, S. F., Yetter, R. A., Yang, V., and Tappan, B. (2007), Combustion of Nano-Aluminum and Liquid Water. Proceedings of the Combustion Institute, 31 (2), 2,029-2,036.
362. Risha, G. A., Harting, G. C., Kuo, K. K., Peretz, A., Koch, D. E., Jones, H. S., Arves, J. P. (2002), Surface Heat Release of HTPB-based Fuels in Oxygen Rich Environments. In Combustion of Energetic Materials (De Luca and Kuo, eds.), pp. 101-115. New York: Begell House.
363. Roache, P. (1982). Computational Fluid Dynamics. Hermosa Publishers.
364. Roberts, T. A., Burton R. L. and Krier H. (1993). Ignition and Combustion of Aluminum/Magnesium Alloy Particles in O2 at High Pressures, Combustion and Flame, 92, 125-143.
365. Robertson A. J. B. (1949). The Thermal Decomposition of Explosives. Trans. Faraday Soc. 45, 85-93.
366. Rosenband, V., and Gany, A. (2009). Activated metal powders as potential energetic materials. International Journal of Energetic Materials and Chemical Propulsion, 8 (4), 291-307.
367. Rosenband, V., Natan, B., and Gany, A. (1995). Ignition of Boron Particles Coated by a Thin Titanium Film. Journal of Propulsion and Power, 11 (6), 1,125-1,131.
368. Rotta, J. C. (1964). Temperaturverteilungen in der Turbulenten Grenzschicht an der Ebenen Platte. Int. J. Heat and Mass Transfer, 7, 215-228.
369. Rowe, P., and Claxton, K. (1965). Heat and Mass Transfer from a Single Sphere to Fluid Flowing through an Array. Trans. Instr. Chem. Engrs., 43, 321-331.
370. Sandborn, V. A. (1974). A Review of Turbulence Measurements in Compressible Flow. NASA TMX-62.
371. Saurel, R., and Abgrall, R., 1999, "A Multiphase Godunov Method for Compressible Multifluid and Multiphase Flows," J. Compt. Phys. 150, pp. 425-467.
372. Scheer, M. D. (1958). The Molecular Weight and Vapor Pressure of Gaseous Boron Suboxide. J. Phys. Chem., 62 (4), 490-493.
373. Schlichting, H. (1968). Boundary-Layer Theory (6th ed). New York: McGraw-Hill.
374. Schlichting, H., and Gersten, K. (2000). Boundary-Layer Theory (8th ed.). New York: Springer.
375. Schmotolocha, S. N., and Edelman, R. B. (1972). The Effect of Additives on High Speed Ignition and Combustion Characteristics of Storable Fuels. AFOSR-TR-73-1082.
376. Schroeder, M. A. (1985). Critical Analysis of Nitramines Decomposition Data: Product Distributions from HMX and RDX Decomposition. Report No. 2659, Ballistics Research Lab, Aberdeen Proving Ground, MD.
377. Shoshin, Y. L., Trunov, M. A., Zhu, X., Schoenitz, M., Dreizin, E. L. (2006). Ignition of Aluminum-Rich Al-Ti Mechanical Alloys in Air. Combustion and Flame, 144 (4), 688-697.
378. Simpson, R. L., Kays, W. M., and Moffat, R. J. (1967). The Turbulent Boundary Layer on a Porous Plate: An Experimental Study of Fluid Dynamics with Injection and Suction. Report HMT-2, Stanford University, Stanford, Calif.
379. Simpson, R. L., Urtiew, P. A., Ornellas, D. L., Moody, G. L., Scribner, K. J., and Hoffman, D. M. (1997). CL-20 Performance Exceeds that of HMX and Its Sensitivity is Moderate. Propellants, Explosives, Pyrotechnics, 22 (5), 249-255.
380. Sinditskii, V. P., Egorshev, V. Y., Tomasi, D., and DeLuca, L. T. (2008). Combustion Mechanism of Ammonium-Nitrate-Based Propellants. Journal of Propulsion and Power, 24 (5), 1068.
381. Sinditskii, V. P., Vu, M. C., Sheremetev, A. B., and Alexandrova, N. S. (2008). Study on Thermal Decomposition and Combustion of Insensitive Explosive 3,3'-diamino-4,4-azofurazan (DAAzF). Thermochimica Acta, 473 (1-2), 25-31.
382. Smilowitz, L., Henson, B.F., Asay, B.W., Dickson, P. M. (2002). A Model of the β-δ Phase Transition in PBX9501. Proceedings of International Detonation Symposium.
383. Smith, R. R. (1972). Characteristics of Turbulence in Free Convection Flow Past a Vertical Plate. Ph.D. thesis, Queen Mary College, University of London.
384. Smolanoff, J., Lapicki, A., Kline, N., and Anderson, S. L. (1995). Effects of Composition, Structure, and H Atom Addition on the Chemistry of Boron Oxide Cluster Ions with HF. J. Phys. Chem., 99 (44), 16276-16283.
385. Smolanoff, J., Sowa-Resat, M., Lapicki, A., Hanley, L., Ruatta, S., Hintz, P., et al. (1996). Kinetic Parameters for Heterogenous Boron Combustion Reactions Via the Cluster Beam Approach. Combustion and Flame, 105 (1-2), 68-79.
386. Sod, G. (1985). Numerical Methods in Fluid Dynamics. New York: Cambridge University Press.
387. Soto, M. R. (1995b). Rate Constant Determinations for HBO + F Channels from ab Initio Reaction Path Calculations. J. Phys. Chem., 99 (17), 6540-6547.
388. Soulen, J. R., Sthapitanonda, P., and Margrave, J. L. (1955). Vaporization of Inorganic Substances: B2O3, TeO2 and Mg3N2. J. Phys. Chem., 59 (2), 132-136.
389. Spalding, D. B. (1971a). Mixing and Chemical Reaction in Steady Confined Turbulent Flames, Thirteenth Symposium (International) on Combustion, 649-657.
390. Spalding, D. B. (1971b). Concentration Fluctuations in a Round Turbulent Free Jet. Chem. Engrg. Sci., 26, 95-107.
391. Spalding, M. J., Krier, H., and Burton, R. L. (1998). Chemical Kinetics of Boron Combustion in High Pressure Ar/F/O2 Mixtures. 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA-1998-3823
392. Sparrow, E. M., and Yu, M. S. (1971). Local Non-similarity Thermal Boundary Layer Solutions. Trans. ASME, J. Heat Transfer, 328-334.
393. Speiser, R., Naiditch, S., and Johnston, H. L. (1950). The Vapor Pressure of Inorganic Substances. II. B2O3. J. Am. Chem. Soc., 72 (6), 2,578-2,580.
394. Stanton, C. T., Garland, N. L., and Nelson, H. H. (1991). Temperature dependence of the kinetics of the reaction boron monoxide + oxygen. J. Phys. Chem., 95 (22), 8,741-8,744.
395. Steinberger, R. (1952). Plateau Propellants; Mechanism of the Plateau Effect. Bulletin of the 8th Meeting of the JANNAF Solid Propellants Group, pp. 157-172.
396. Summerfield, M., and Krier, H. (1969). Errors in Non-Steady Combustion Theory in the Past Decade (A Review). AIAA Paper 69-178.
397. Summerfield, M., Parker, K. H., and Most, W. J. (1969). The Ignition Transient in Solid Propellant Rocket Motors. Report 769, Princeton University, Aerospace and Mechanical Sciences, Princeton NJ.
398. Summerfield, M., Sutherland, G. S.,Webb, W. J., and Taback, H. J. (1960). Burning Mechanism of Ammonium Perchlorate Propellants. Progress in Astronautics and Rocketry, 1, 141-182.
399. Sutton, G. P. (1992). Rocket Propulsion Elements: An Introduction to the Engineering of Rockets. New York: Wiley Interscience.
400. Sutton, G. P., and Biblarz, O. (2001). Rocket Propulsion Elements, An Introduction to the Engineering of Rockets (7th Edition ed.). New York: John Wiley and Sons.
401. Sutton, G. P., and Biblarz, O. (2007). Rocket Propulsion Elements (8th ed.). New York: John Wiley and Sons.
402. Talley, C. P. (1959). Mechanical Properties of Glassy Boron. J. Appl. Phys., 30 (7), 1,114-1,116.
403. Taylor, J., Hall, C., and Thomas, H. (1947). The thermochemistry of propellant explosives. Journal of Physical and Colloid Chemistry, 51 (2), 580-592.
404. Thakre, P., and Yang, V. (2008). Chemical Erosion of Carbon-Carbon/Graphite Nozzles in Solid-Propellant Rocket Motors. Journal of Propulsion and Power, 24 (4), 822-833.
405. T'ien, J. S. (1972). Oscillatory Burning of Solid Propellants Including Gas Phase Time Lag. Combustion Science and Technology, 5, 47-54.
406. Todd, J., and Glasser, W. G. (1996). NMR Spectroscopy of Nitrocellulose Samples. Contract report to Alliant Tech Systems, Inc., Radford, VA. Glasser, W.G. and Audrey, G. Zink, A. G., Final report on Cellulose and Cellulose Nitrate Characterization, Section IV. Virginia Polytechnic Institute and State University, Blacksburg, VA.
407. Toro, E. (1997). Riemann Solvers and Numerical Methods for Fluid Dynamics. Heidelberg: Springer.
408. Tsang, W. (1992). Chemical Kinetic Data Base for Propellant Combustion II. Reactions Involving CN, NCO, and HNCO. Journal of Physical Chemistry, Reference Data, 21 (4), 753-791.
409. Tsang, W., and Herron, J. T. (1991). Chemical Kinetic Data Base for Propellant Combustion I. Reactions Involving NO, NO2, HNO, HNO2, HCN and N2O. Journal of Physical Chemistry, Reference Data, 20 (4), 609-664.
410. Turns, S. R. (1995). An Introduction to Combustion: Concepts and Applications. New York: McGraw-Hill.
411. Turns, S. A., Holl, J. T., Solomon, A. S., and Faeth, G. M. (1985). Gasification of Boron Oxide Drops in Combustion Gases. Combustion Science and Technology, 43 (5 and 6), 287-300.
412. Uda, R. T. (1968). A Shock-Tube Study of the Ignition Limit of Boron Particles. G.A./M.E. thesis, Air Force Institute of Technology, Wright-Patterson Air Force Base, Dayton, OH.
413. Ulas, A. (2000). Ignition and Combustion of Boron Particles in Fluorine-Containing Environments. Ph.D Thesis, the Pennsylvania State University.
414. Ulas, A., Kuo, K. K., and Gotzmer, C. (2001). Ignition and Combustion of Boron Particles in Fluorine-Containing Environments. Combustion and Flame, 127 (1-2), 1,935-1,957.
415. Van Driest, E. G. (1956). On Turbulent Flow Near a Wall. J. Aeron. Sci., 23, 1,007.
416. Vanderhoff, J. A., Anderson, W. R., and Kotlar, A. J. (1992). Dark Zone Modeling of Solid Propellant Flames. Proceedings of the 29th JANNAF Combustion Subcommittee Meeting, 2, pp. 225-237. Columbia, MD: CPIA Publ. 593.
417. Vilyunov, V. N., and Zarko, V. E. (1989). Ignition of Solids. New York, USA: Elsevier Science Publishers.
418. von Grosse, A. and Conway, J. B. (1958). Combustion of Metals in Oxygen, Ind. Eng. Chem., 50 (4), 663-672.
419. Von Elbe G. (1966). Solid Propellant Ignition and Response of Combustion to Pressure Transient. AIAA Paper No. 66-668.
420. Vovchuk, Y. I., Zolotko, A. N., Klyachko, L. A., and Polushchuk, D. A. (1975). High-Temperature Combustion of an Immobile Boron Particle in an Oxygen-Bearing Medium. Combustion, Explosion, and Shock Waves, 11 (4), 471-476.
421. Vovchuk, Y. I., Zolotko, A. N., Klyachko, L. A., Polishchuk, D. I., and Shevchuk, V. G. (1974). Gasification of boron oxide. Combustion, Explosion, and Shock Waves, 10 (4), 538-540.
422. Walker, P. L., Rusinko, F., and Austin, L. G. (1959). Adv. Catalysis (vol. 11). New York: Academic Press.
423. Wartik, T., and Apple, E. F. (1955). A New Modification of Boron Monoxide. J. Am. Chem. Soc., 77 (23), 6,400-6,401.
424. Watson, T. J. (1994). The Assessment of Dynamic Burning Behavior for JA2 Propellant Rods. 31st JANNAF Combustion Sub-Committee Meeting, 2, pp. 247-258. CPIA No. 620.
425. Welsh, J. W. (1963). Experimental Results on the Combustion Rate of Graphite Exposed to a Plasma-Arc Flow. Aerospace Corp., SSD-TDR-63-193.
426. Welsh, J. W., and Chung, P. M. (1963). Proc. Heat Transfer Fluid Mech. Inst. Stanford, CA: Stanford University Press.
427. White, F. M. (1974). Viscous Fluid Flow. New York: McGraw-Hill.
428. Whitten, D. G., Kays, W. M., and Moffat, R. J. (1967). The Turbulent Boundary Layer on a Porous Plate: Experimental Heat Transfer with Variable Suction, Blowing, and Surface Temperature. Report HMT-3, Stanford University, Stanford, CA.
429. Widener, J. F. and Beckstead M. W. (1998). Aluminum Combustion Modeling in Solid Propellant Combustion Products, AIAA 98-3824.
430. Widener, J.F., Liang, Y and Beckstead, M.W. (1999). Aluminum Combustion Modeling In Solid Propellant Environments, AIAA-99-0449, Los Angeles, CA.
431. Wight C. A. and Botcher T. R. (1994). Explosive Thermal Decomposition Mechanism of RDX. The American Chemical Society, 98 (21), 5,441-5,444.
432. Williams, F. A. (1965). Combustion Theory. Reading, MA: Addison-Wesley.
433. Williams, F. A. (1997). Some Aspects of Metal Particle Combustion, Physical and Chemical Aspects of Combustion: A Tribute to Irv Glassman. (F. L. Dryer, and R. F. Sawyer, eds.) The Netherlands: Gordon and Breach.
434. Wu, X., Arora, R., Kumar, M. and Kuo, K. K. (1982). An Aero-thermo-chemical Model for Erosive Burning of Double-Base Propellants in Turbulent Shear Flow. Proceedings of 13th Aerospace Technology and Science Meeting, Tokyo, Japan, June 26-July 3, 1982.
435. Xu, S. C., Irle, S., Musaev, D. G., and Lin, M. C. (2007). Quantum Chemical Study of the Dissociative Adsorption of OH and H2O on Pristine and Defective Graphite (0001) Surfaces: Reaction Mechanisms and Kinetics, Journal of Physical Chemistry. 111, 1,355-1,365.
436. Yang, K. T. (1964). Laminar Free-Convection Wake above a Heated Vertical Plate. ASME Trans. Ser. E, J. Appl. Mech., 68, 131-138.
437. Yang, V., Brill, T. B., and Ren, W.-Z. (eds.). (2000). Solid Propellant Chemistry, Combustion, and Motor Interior Ballistics, vol. 185. Reston, VA.: American Institute of Aeronautics and Astronautics, Inc.
438. Yanta, W. J., and Lee, R. E. (1976). Measurements of Mach 3 Turbulence Transport Properties on a Nozzle Wall. AIAA Journal, 14 (6), 725-734.
439. Yeh, C. L. (1995). Ignition and Combustion of Boron Particles. Ph.D. thesis, Pennsylvania State University.
440. Yeh, C. L., and Kuo, K. K. (1996a). Theoretical Model Development and Verification of Diffusion/Reaction Mechanisms of Boron Paricle Combustion. Transport Phenomena in Combustion, 1, 45-63.
441. Yeh, C. L., and Kuo, K. K. (1996b). Experimental Studies of Boron Particle Combustion. Transport Phenomena in Combustion, 2, 1,461-1,472.
442. Yeh, C. L., and Kuo, K. K. (1997). Ignition and Combustion of Boron Particles. Prog. Energy Combust. Sci., 22, 511-541.
443. Yeh, C. L., Hsieh, W. H., Kuo, K. K., and Felder, W. (1994). Non-Intrusive Combustion Diagnostics (vol. 3). (K. K. Kuo, and T. P. Parr, eds.) Begell House, Inc.
444. Yetter, R. A., Cho, S. Y., Rabitz, H., Dryer, F. L., Brown, R. C., and Kolb, C. E. (1988). Chemical Kinetic Modeling and Sensitivity Analyses for Boron Assisted Hydrocarbon Combustion. Twenty-Second Symposium (International) on Combustion, 22, pp. 919-929. Pittsburgh, PA: The Combustion Institute.
445. Yetter R.A., Dryer, F. L., Alien, M. T., and Gatto, J. L. (1995). Development of Gas-Phase Reaction Mechanisms for Nitramine Combustion. Journal of Propulsion and Power, 11 (4), 683-697.
446. Yetter, R., Dryer, F., Alien, M., and Gatto, J. (1995). Development of Gas-Phase Reaction Mechanisms for Nitramine Combustion. Journal of Propulsion and Power, 11 (4), 683-697.
447. Yetter, R. A., Dryer, F. L., Rabitz, H., Brown, R. C., and Kolb, C. E. (1998). Effect of Fluorine on the Gasification Rate of Liquid Boron Oxide Droplets. Combustion and Flame, 112 (3), 387-403.
448. Yetter, R. A., Rabitz, H., Dryer, F. L., Brown, R. C., and Kolb, C. E. (1991). Kinetics of High-Temperature B/O/H/C Chemistry. Combustion and Flame, 83 (1-2), 43-62.
449. Yetter, R. A., Risha, G. A., and Son, S. F. (2009). Metal Particle Combustion and Nanotechnology. Proceedings of the Combustion Institute, 32, 1,819-1,838.
450. Yin, C., Ziru, L., Ganghe, W., and Chengyun, W. (1991). Determination of Heat Capacity of Explosives and Related Materials by DSC. Proc. Int. Pyrotech. Semin. 17th, 1, pp. 515-521.
451. Yuasa, S., and Isoda, H. (1991). Ignition and Combustion of Small Boron Lumps in an Oxygen Stream. Combustion and Flame, 86 (3), 219-222.
452. Zarko, V., and Kuo, K. K. (1994). Critical Review of Methods for Regression Rate Measurements of Condensed Phase Systems. International Journal of Energetic Materials and Chemical Propulsion, 3 (1-6), 600-623.
453. Zel'dovich, Ya. B. (1942). On the Theory of Combustion of Gun Powders and Explosives. Zhurnal Eksperimental' Noi I Theoreticheskoi Fiziki, 12 (11-12), 498-524.
454. Zenin, A. A. (1980). The Processes in Ballistite Powder Combustion Zones. Physical Processes in Combustion and Explosion [in Russian], 68-105.
455. Zenin, A. A. Thermophysics of Stable Combustion Waves of Solid Propellants. in L. De Luca, E. W. Price, and M. Summerfield (eds.), Nonsteady Burning and Combustion Stability of Solid Propellants, 143, 197-228.
456. Zenin, A. A. HMX and RDX: Combustion Mechanism and Influence on Modern Double-Base Propellant Combustion. Journal of Propulsion and Power, 11 (4), 752.
457. Zenin, A. A., and Nefedova, O. I. (1967). Burning of ballistite powder over a broad range of initial temepratures. Fizika Goreniya i Vzryva, 3 (1), 45-63.
458. Zenin, A. A., Kusnezov G., and Kolesnikov V. (1999). Physics of Aluminum Particle Combustion at Zero-Gravity, AIAA-99-0696.
459. Zenin, A. A., Kusnezov G., and Kolesnikov V. (2000). Physics of Aluminum Particle Combustion at Convection, AIAA-2000-0849.
460. Zhao, X., Hintsa, E. J., and Lee, Y. T. (1988). Infrared Multiphoton Dissociation of RDX in a Molecular Beam. Journal of Chemical Physics, 2 (15), 801-810.
461. Zhou, W. (1998). Numerical Study of Multi-Phase Combustion: Ignition and Combustion of an Isolated Boron Particle in Fluorinated Environments. Ph.D. thesis, Princeton University, Department of Mechanical and Aerospace Engineering.
462. Zhou, W., Yetter, R. A., Dryer, F. L., Rabitz, H., Brown, R. C., and Kolb, C. E. (1998). Effect of Fluorine on the Combustion of "Clean" Surface Boron Particles. Combustion and Flame, 112 (4), 507-521.
463. Zhou, W., Yetter, R. A., Dryer, F. L., Rabitz, H., Brown, R. C., and Kolb, C. E. (1999). Multi-Phase Model for Ignition and Combustion of Boron Particles. Combustion and Flame, 117 (1-2), 227-243.
464. Zimmer-Galler, R. (1968). Correlations Between Deflagration Characteristics and Surface Properties of Nitramine-Based Propellants. AIAA Journal, 6 (11), 2,107-2,110.
465. Zvuloni, R., Gomez, A., and Rosner, D. E. (1991). High Temperature Kinetics of Solid Boron Gasification by B2O3(g)-Chemical Propulsion Implications. Journal of Propulsion and Power, 7, 9-13.