Introduction to Finite Element Analysis: Formulation, Verification and Validation

Introduction to Finite Element Analysis: Formulation, Verification and Validation

Volumn , Issue , 2011, Pages

  Szabó, Barna ^a   Babuška, Ivo ^b  

^a WASHINGTON UNIVERSITY   (United States)

^b UNIVERSITY OF TEXAS AT AUSTIN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891580217     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119993834     Document Type: Book

References (102)

1. Actis R, Szabó BA and Schwab C. Hierarchic models for laminated plates and shells. Comput. Methods Appl. Mech. Eng. 172 (1999) 79-107.
2. Ainsworth M and Oden JT. A Posteriori Error Estimation in Fiinite Element Analysis. John Wiley & Sons, Inc., New York, 2000.
3. ASTM E 1049-85 (Reapproved 1997). Standard Practices for Cycle Counting in Fatigue Analysis. In: Annual Book of ASTM Standards, Vol. 03.01 Philadelphia, 1999, pp. 710-718.
4. Babuška I, d'Harcourt JM and Schwab C. Optimal shear correction factors in hierarchical plate modelling. Math. Modelling Sci. Comput. 1 (1993) 1-30.
5. Babuška I, Szabó BA and Katz IN. The p-version of the finite element method. SIAM J. Numer. Anal. 18 (1981) 515-545.
6. Babuška I and Miller A. The post-processing approach in the finite element method - Part 1: Calculation of displacements, stresses and other higher derivatives of the displacements. Int. J. Numer. Meth. Eng. 20 (1984) 1085-1109.
7. Babuška I and Oden JT. Verification and validation in computational engineering and science: basic concepts. Comput. Methods Appl. Mech. Eng. 193 (2004) 4057-4066.
8. Babuška I and Oden JT. Reliability of computer predictions: can they be trusted? Int. J. Numer. Anal. Modeling 3 (2006) 255-272.
9. Babuška I and Osborn J. Eigenvalue problems. In: Handbook of Numerical Analysis, P. G. Ciarlet and J. L. Lions, editors. Elsevier, North-Holland, Amsterdam, Vol. II, 1991, 642-787.
10. Babuška I and Rheinboldt WC. A posteriori error estimates for adaptive finite element computations. SIAM J. Numer. Anal. 15 (1978) 736-754.
11. Babuška I and Scapolla T. Benchmark computation and performance evaluation for a rhombic plate bending problem. Int. J. Numer. Meth. Eng. 28 (1989) 155-179.
12. Babuška I and Silva RS. Numerical treatment of engineering problems with uncertainties. The fuzzy set approach and its application to the heat exchanger problem. Int. J. Numer. Meth. Eng. Published in electronic form in 2010. To appear in 2011.
13. Babuška I and Strouboulis T. The Finite Element Method and its Reliability. Oxford University Press, Oxford, 2001.
14. Babuška I and Suri M. The p-and hp-versions of the finite element method: an overview. Comput. Methods: Appl. Mech. Eng. 80 (1990) 5-26.
15. Babuška I and Szabó B. On the generalized plane strain problem in thermoelasticity. Comput. Methods Appl. Mech. Eng. 195 (2006) 5390-5402.
16. Babuška I and Tempone R. Static frame challenge problem: summary. Comput. Methods Appl. Mech. Eng. 197 (2008) 2572-2577.
17. Babuška I, Whiteman JR and Strouboulis T. Finite Elements: An Introduction to the Method and Error Estimation. Oxford University Press, Oxford, 2010.
18. Bathias C and Paris PC. Gigacycle Fatigue in Mechanical Practice. Marcel Dekker, New York, 2005.
19. Brezzi F and Fortin M. Mixed and Hybrid Finite Element Methods. Springer-Verlag, New York, 1991.
20. Chen Q and Babuška I. Approximate optimal points for polynomial interpolation of real functions in an interval and in a triangle. Comput. Methods Appl. Mech. Eng. 128 (1995) 405-417.
21. Ciarlet PG. The Finite Element Method for Elliptic Problems. SIAM, Philadelphia, 2002.
22. Clough RW and Tocher JL. Finite element stiffness matrices for analysis of plate bending. In: Proceedings of Conference on Matrix Methods in Structural Mechanics, Report AFFDL-TR-66-80, Wright-Patterson Air Force Base, Ohio (1966) 515-545.
23. Corum JM, Bolt SE, Greenstreet WL and Gwaltney RC. Theoretical and experimental stress analysis of ORNL thin-shell cylinder-to-cylinder model No. 1. Oak Ridge National Laboratory Report ORNL 4553, Oak Ridge, TN, (October 1972).
24. Costabel M, Dauge M and Suri M. Numerical approximation of a singularly perturbed contact problem. Comput. Methods Appl. Mech. Eng. 157 (1998) 349-363.
25. Cowper GR. The shear coefficient in Timoshenko's beam theory. J. App. Mech. 33 (June 1966) 335-340.
26. Demkowicz L. Computing with hp-adaptive finite elements. Vol. 1: One and two-dimensional elliptic and Maxwell problems. Chapman & Hall/CRC Boca Raton 2007.
27. Demmel JW. Applied Numerical Linear Algebra. SIAM, Philadelphia, 1997.
28. Düster A. High order finite elements for three-dimensional thin-walled nonlinear continua. Dissertation. Technische Universität München, 2002.
29. Düster A and Rank E. The p-version of the finite element method compared to an adaptive hversion for the deformation theory of plasticity. Comput. Methods Appl. Mech. Eng. 190 (2001) 1925-1935.
30. Ferson S, Oberkampf WL and Ginzburg L. Model validation and predictive capability for the thermal challenge problem. Comput. Methods Appl. Mech. Eng. 197 (2008) 2408-2430.
31. Fung YC. Foundations of Solid Mechanics. Prentice Hall, Englewood Cliffs, NJ, 1965.
32. Girkmann K. Flächentragwerke, 4th edition. Springer-Verlag, Vienna, 1956.
33. Golub GH and Van Loan CF. Matrix Computations. The Johns Hopkins University Press, Baltimore, MD, 1989.
34. Gui B and Babuška I. The h-, p- and hp-versions of the FEM in 1 dimension. Parts I, II, and III. Num. Math. 80 (1986) 577-683.
35. Guide for Verification and Validation in Computational Solid Mechanics. ASME V&V 10-2006, American Society of Mechanical Engineers, New York (2006).
36. Gwaltney RC, Corum JM, Bolt SE and Bryson JW. Experimental stress analysis of cylinder-tocylinder shell models and comparisons with theoretical predictions. J. Pressure Vessel Technol. (1976) 283-290.
37. Hu S and Pagano NJ. On the use of a plane strain model to solve generalized plane strain problems. J. Appl. Mech. 64 (1997) 236-238.
38. Kanninen MF and Popelar CH. Advanced Fracture Mechanics. Oxford University Press, New York, 1985.
39. Karniadakis GE and Sherwin SJ. Spectral/hp ElementMethods for CFD. Oxford University Press, Oxford, 1999.
40. Királyfalvi G. and Szabó B. Quasi-regional mapping for the p-version of the finite element method. Finite Elem. Anal. Des. 27 (1997) 85-97.
41. Kleindorfer GB, O'Neill R and Ganeshan R. Validation in Simulation: Various Positions in the Philosophy of Science. Management Science. 44 (1998) 1087-1099.
42. Kozlov VA, Mazia VG and Rossmann J. Spectral Problems Associated with Corner Singularities of Solutions of Elliptic Equations. American Mathematical Society, Providence, RI, 2000.
43. Kuhn P and Hardrath HF. An engineering method for estimating notch-size effect in fatigue tests of steel. NACA Technical Note 2805 (1952).
44. Lazzeri L and Mariani U. Application of damage tolerance principles to the design of helicopters. Int. J. Fatigue 31 (2009) 1039-1045.
45. Mikhlin SG. The Numerical Performance of Variational Methods. Wolters-Noordhoff, Groningen, 1971.
46. Military Handbook MIL-HDBK-5H: Metallic Materials and Elements for Aerospace Vehicle Structures. US Department of Defense, December 1, 1998.
47. Morley LSD. Skew Plates and Structures. Macmillan, New York, 1963.
48. Muskhelishvili NI. Some Basic Problems of the Mathematical Theory of Elasticity, 3rd edition Published in Russian in 1949. English translation by J. R. M. Radok. Noordhoff, Groningen, 1953.
49. Naghdi PM. Foundations of elastic shell theory. In: Progress in Solid Mechanics, Vol. 4. North-Holland, Amsterdam, 1963.
50. Nazarov SA and Plamenevsky BA. Elliptic Problems in Domains with Piecewise Smooth Boundaries. Walter de Gruyter & Co. Berlin 1994.
51. Nervi S and Szabó BA. On the estimation of residual stresses by the crack compliance method. Comput. Methods Appl. Mech. Eng. 196 (2007) 3577-3584.
52. Nervi S, Szabó BA and Young KA. Prediction of distortion of airframe components made from aluminum plates. AIAA J. 47 (2009) 1635-1641.
53. Neuber H. Kerbspannungslehre. Springer-Verlag, Berlin, 1937.
54. Novozhilov VV. Thin Shell Theory. Noordhoff, Groningen, 1964.
55. Oberkampf WL and Roy CJ. Verification and Validation in Scientific Computing. Cambridge University Press, Cambridge, 2010.
56. Oberkampf WL and Trucano TG. Verification and validation benchmarks. Sandia Report SAND2007-0853 (February 2007).
57. Oreskes N, Shrader-Frechette K and Belitz K. Verification, validation and confirmation of numerical models in the earth sciences. Nature 263 (1994) 641-646.
58. Osgood CC. Fatigue Design. John Wiley & Sons, Inc., New York, 1970.
59. Overgaard V and Hutchinson JW. Effect of T-stress on mode I crack growth resistance in a ductile solid. Int. J. Solids Struct. 31 (1994) 823-833.
60. Páczelt I and Mróz Z. Optimal shape of contact interfaces due to wear in the steady relative motion. Int. J. Solids Struct. 44 (2006) 1-30.
61. Páczelt I, Szabó BA and Szabó T. Solution of contact problem using the hp-version of the finite element method. Comput. Math. App. 38 (1999) 49-69.
62. Papadakis PJ and Babuška I. A numerical procedure for the determination of certain quantities related to the stress intensity factors in two-dimensional elasticity. Comput. Methods Appl. Mech. Eng. 122 (1995) 69-92.
63. Paris PC, Gomez MP and Anderson WE. A rational analytic theory of fatigue. Trend Eng. 13 (1961) 9-14.
64. Peterson RE. Stress Concentration Factors. John Wiley & Sons, Inc., New York, 1974.
65. Petroski H. To Engineer is Human. Vintage, New York, 1992.
66. Petroski H. Design Paradigms: Case Histories of Error and Judgment in Engineering. Cambridge University Press, New York, 1994.
67. Pitkäranta J, Matache A-M and Schwab C. Fourier mode analysis of layers in shallow shell deformation. Comput. Methods Appl. Mech. Eng. 190 (2001) 2943-2975.
68. Polyanin AD. Linear Partial Differential Equations for Engineers and Scientists. Chapman & Hall/CRC Press, Boca Raton, FL, 2002.
69. Rank E and Babuška I. An expert system for the optimal mesh design in the hp-version of the finite element method. Int. J. Numer. Meth. Eng. 24 (1987) 2087-2106.
70. Reddy JN. An Introduction to Nonlinear Finite Element Analysis. Oxford University Press, Oxford, 2004.
71. Rektorys K. Variational Methods in Mathematics, Science and Engineering, 2nd edition, Reidel, Dordrecht 1980.
72. Roache PJ. Verification and Validation in Computational Science and Engineering. Hermosa, Socorro, NM, 1998, pp. 403-412.
73. Schijve J. Fatigue of Structures and Material, 2nd edition. Springer-Verlag, Berlin, 2009.
74. Schwab C. p-and hp-Finite Element Methods: Theory and Applications in Solid and Fluid Mechanics. Clarendon Press, Oxford, 1998.
75. Schwab C, Suri M and Xenophontos C. The hp finite element method for problems in mechanics with boundary layers. Comput. Methods Appl. Mech. Eng. 157 (1998) 311-333.
76. Simo JC and Hughes TJR. Computational Inelasticity. Springer-Verlag, New York, 1998.
77. Simo JC and Laursen TA. An augmented Lagrangian treatment of contact problems involving friction. Comput. Struct. 42 (1992) 97-116.
78. Sivia DS. Data Analysis: A Bayesian Tutorial. Oxford University Press, Oxford, 1996.
79. Sokolnikoff IS. Mathematical Theory of Elasticity, 2nd edition. McGraw-Hill, New York, 1956.
80. Suresh S. Fatigue of Materials, 2nd edition. Cambridge University Press, Cambridge, 1998.
81. Szabó B and Actis R. On the importance and uses of feedback information in FEA. Appl. Numer. Math. 52 (2005) 219-234.
82. Szabó B and Actis R. On the role of hierarchic spaces and models in verification and validation. Comput. Methods Appl. Mech. Eng. 198 (2009) 1273-1280.
83. Szabó BA and Babuška I. Computation of the amplitude of stress singular terms for cracks and reentrant corners. In: Fracture Mechanics: Nineteenth Symposium ASTM STP 969, T. A. Cruse, editor, American Society for Testing and Materials, Philadelphia, 1988, pp. 101-124.
84. Szabó B and Babuška I. Finite Element Analysis. John Wiley & Sons, Inc., New York, 1991.
85. Szabó B, Babuška I, Pitkäranta J and Nervi S. The problem of verification with reference to the Girkmann problem. Eng. Comput. 26 (2010) 171-183. doi: 10.1007/s00366-009-0155-0.
86. Szabó B, Düster A and Rank E. The p-version of the Finite Element Method. In: Encyclopedia of Computational Mechanics. Volume 1: Fundamentals, E. Stein, R. de Borst and T. J. R. Hughes, editors. John Wiley & Sons, Ltd, Chichester, 2004, Chapter 5.
87. Szabó BA and Muntges DE. Procedures for the verification and validation of working models for structural shells. J. Appl. Mech. 72 (2005) 907-915.
88. Szabó BA and Sahrmann GJ. Hierarchic plate and shell models based on p-extension. Int. J. Numer. Meth. Eng. 26 (1988) 1855-1881.
89. Szabó BA and Yosibash Z. Numerical analysis of singularities in two dimension. Part 2: Computation of generalized flux/stress intensity factors. Int. J. Numer. Meth. Eng. 39 (1996) 409-434.
90. Taylor D. The Theory of Critical Distance: A New Perspective in Fracture Mechanics. Elsevier, Amsterdam, 2007.
91. Timoshenko S and Goodier JN. Theory of Elasticity, 2nd edition. McGraw-Hill, New York, 1951.
92. Timoshenko S and Woinowsky-Krieger S. Theory of Plates and Shells, 2nd edition. McGraw-Hill, New York, 1959.
93. Vasilopoulos D. On the determination of higher order terms of singular elastic stress fields near corners. Numer. Math. 53 (1998) 51-95.
94. Vigilante VN, Underwood JH and Crayon D. Use of instrumented bolt and constant displacement bolt-loaded specimen to measure in-situ hydrogen crack growth in high-strength steels. In: Fatigue and In: Fracture Mechanics: 30th Volume, ASTM STP 1360, P. C. Paris and K. L. Jerina, editors, American Society for Testing and Material, West Conshohocken, PA, 2000, pp. 377-387.
95. Walker K. The effect of stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 aluminum. ASTM STP 462. American Society for Testing and Materials, Philadelphia, 1970.
96. Wriggers P. Computational Contact Mechanic, 2nd edition. Springer-Verlag, Berlin and Heidelberg, 2006.
97. Yosibash Z and Szabó BA. Generalized stress intensity factors in linear elastostatics. Int. J. Fract. 72 (1995) 223-240.
98. Yosibash Z and Szabó BA. Numerical analysis of singularities in two dimension. Part 1: Computation of eigenpairs. Int. J. Numer. Meth. Eng. 38 (1995) 2055-2082.
99. Young WC and Budynas RG. Roark's Formulas for Stress and Strain, 7th edition. McGraw-Hill, New York, 2002.
100. Zienkiewicz OC and Zhu JZ. The superconvergent patch recovery and a posteriori error estimates. Part 1: The recovery technique. Int. J. Numer. Meth. Eng. 33 (1992) 1331-1364.
101. Zienkiewicz OC and Zhu JZ. The superconvergent patch recovery and a posteriori error estimates. Part 2: Error estimates and adaptivity. Int. J. Numer. Meth. Eng. 33 (1992) 1365-1382.
102. Zienkiewicz OC and Zhu JZ. The superconvergent patch recovery (SPR) and adaptive finite element refinement. Comput. Meth. Appl. Mech. Eng. 101 (1992) 207-224.