The micro-structure of bone trabecular fracture: An inter-site study

Bone

Volumn 60, Issue , 2014, Pages 78-86

  Tassani, Simone ^a   Matsopoulos, George K ^b  

^a INSTITUTE OF COMMUNICATION AND COMPUTER SYSTEMS   (Greece)

^b NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

Bone fracture; Classification; Local analysis; Micro CT; Prediction; Trabecular bone

Indexed keywords

ARTICLE; BIOMECHANICS; BONE STRUCTURE; BONE TISSUE; CLASSIFIER; COMPRESSION; COMPUTED TOMOGRAPHY SCANNER; CONTROLLED STUDY; DATA BASE; DIAGNOSTIC TEST ACCURACY STUDY; DISEASE CLASSIFICATION; FEMUR; FRACTURE; HISTOPATHOLOGY; HUMAN; MICRO-COMPUTED TOMOGRAPHY; MORPHOMETRICS; MUSCULOSKELETAL SYSTEM PARAMETERS; PREDICTION; RISK ASSESSMENT; SENSITIVITY AND SPECIFICITY; TIBIA; TRABECULAR BONE;

BONE FRACTURE; CLASSIFICATION; LOCAL ANALYSIS; MICRO-CT; PREDICTION; TRABECULAR BONE;

COMPRESSIVE STRENGTH; FEMUR; FRACTURES, BONE; HUMANS; ORGAN SIZE; TIBIA; X-RAY MICROTOMOGRAPHY;

EID: 84891060375     PISSN: 87563282     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.bone.2013.12.007     Document Type: Article

References (63)

1. Kanis J.A., Johnell O. Requirements for DXA for the management of osteoporosis in Europe. Osteoporos Int 2005, 16:229-238.
2. International Osteoporosis Foundation SCOPE: A scorecard for osteoporosis in Europe http://www.iofbonehealth.org/scope-scorecard-osteoporosis-europe.
3. Nazarian A., Stauber M., Zurakowski D., Snyder B.D., Muller R. The interaction of microstructure and volume fraction in predicting failure in cancellous bone. Bone 2006, 39:1196-1202.
4. Perilli E., Baleani M., Ohman C., Fognani R., Baruffaldi F., Viceconti M. Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur. J Biomech 2008, 41:438-446.
5. Tassani S., Ohman C., Baleani M., Baruffaldi F., Viceconti M. Anisotropy and inhomogeneity of the trabecular structure can describe the mechanical strength of osteoarthritic cancellous bone. J Biomech 2010, 43:1160-1166.
6. Nazarian A., von Stechow D., Zurakowski D., Muller R., Snyder B.D. Bone volume fraction explains the variation in strength and stiffness of cancellous bone affected by metastatic cancer and osteoporosis. Calcif Tissue Int 2008, 83:368-379.
7. Tassani S., Matsopoulos G.K., Baruffaldi F. 3D identification of trabecular bone fracture zone using an automatic image registration scheme: A validation study. J Biomech 2012, 45:2035-2040.
8. Marshall D., Johnell O., Wedel H. Meta-analysis of how well measures of bone mineral density predict occurrence of osteoporotic fractures. BMJ 1996, 312:1254-1259.
9. McCreadie B.R., Goldstein S.A. Biomechanics of fracture: is bone mineral density sufficient to assess risk?. J Bone Miner Res 2000, 15:2305-2308.
10. Siris E., Delmas P.D. Assessment of 10-year absolute fracture risk: a new paradigm with worldwide application. Osteoporos Int 2008, 19:383-384.
11. Donaldson M.G., Palermo L., Schousboe J.T., Ensrud K.E., Hochberg M.C., Cummings S.R. FRAX and Risk of Vertebral Fractures: The Fracture Intervention Trial (FIT). J Bone Miner Res 2009, 24:1793-1799.
12. Lippuner K., Johansson H., Kanis J.A., Rizzoli R. FRAX(R) assessment of osteoporotic fracture probability in Switzerland. Osteoporos Int 2009, 21:381-389.
13. Watts N.B., Ettinger B., LeBoff M.S. FRAX facts. J Bone Miner Res 2009, 24:975-979.
14. Tassani S., Ohman C., Baruffaldi F., Baleani M., Viceconti M. Volume to density relation in adult human bone tissue. J Biomech 2011, 44:103-108.
15. Gibson L.J. Biomechanics of cellular solids. J Biomech 2005, 38:377-399.
16. Goulet R.W., Goldstein S.A., Ciarelli M.J., Kuhn J.L., Brown M.B., Feldkamp L.A. The relationship between the structural and orthogonal compressive properties of trabecular bone. J Biomech 1994, 27:375-389.
17. Snyder B.D., Piazza S., Edwards W.T., Hayes W.C. Role of trabecular morphology in the etiology of age-related vertebral fractures. Calcif Tissue Int 1993, 53(Suppl. 1):S14-S22.
18. Helgason B., Perilli E., Schileo E., Taddei F., Brynjolfsson S., Viceconti M. Mathematical relationships between bone density and mechanical properties: a literature review. Clin Biomech (Bristol, Avon) 2008, 23:135-146.
19. Jin H., Lu Y., Harris S.T., Black D.M., Stone K., Hochberg M.C., et al. Classification algorithms for hip fracture prediction based on recursive partitioning methods. Med Decis Making 2004, 24:386-398.
20. Christopher J.J., Ramakrishnan S. Assessment and classification of mechanical strength components of human femur trabecular bone using texture analysis and neural network. J Med Syst 2008, 32:117-122.
21. Gibson L.J. The mechanical behaviour of cancellous bone. J Biomech 1985, 18:317-328.
22. Mulder L., van Rietbergen B., Noordhoek N.J., Ito K. Determination of vertebral and femoral trabecular morphology and stiffness using a flat-panel C-arm-based CT approach. Bone 2012, 50:200-208.
23. Day J.S., Ding M., van der Linden J.C., Hvid I., Sumner D.R., Weinans H. A decreased subchondral trabecular bone tissue elastic modulus is associated with pre-arthritic cartilage damage. J Orthop Res 2001, 19:914-918.
24. Ding M., Odgaard A., Hvid I. Changes in the three-dimensional microstructure of human tibial cancellous bone in early osteoarthritis. J Bone Joint Surg Br 2003, 85:906-912.
25. Nagele E., Kuhn V., Vogt H., Link T.M., Muller R., Lochmuller E.M., et al. Technical considerations for microstructural analysis of human trabecular bone from specimens excised from various skeletal sites. Calcif Tissue Int 2004, 75:15-22.
26. Stoico R., Tassani S., Perilli E., Baruffaldi F., Viceconti M. Quality control protocol for in vitro micro-computed tomography. J Microsc 2010, 238:162-172.
27. Muller R., Ruegsegger P. Micro-tomographic imaging for the nondestructive evaluation of trabecular bone architecture. Stud Health Technol Inform 1997, 40:61-79.
28. Sasov A., Van Dyck D. Desktop X-ray microscopy and microtomography. J Microsc 1998, 191:151-158.
29. Nazarian A., Snyder B.D., Zurakowski D., Muller R. Quantitative micro-computed tomography: A non-invasive method to assess equivalent bone mineral density. Bone 2008, 43:302-311.
30. Schweizer S., Hattendorf B., Schneider P., Aeschlimann B., Gauckler L., Muller R., et al. Preparation and characterization of calibration standards for bone density determination by micro-computed tomography. Analyst 2007, 132:1040-1045.
31. Goldstein S.A., Goulet R., McCubbrey D. Measurement and significance of three-dimensional architecture to the mechanical integrity of trabecular bone. Calcif Tissue Int 1993, 53(Suppl. 1):S127-S132. [discussion S132-3].
32. Kuhn J.L., Goldstein S.A., Feldkamp L.A., Goulet R.W., Jesion G. Evaluation of a microcomputed tomography system to study trabecular bone structure. J Orthop Res 1990, 8:833-842.
33. Ding M., Hvid I. Quantification of age-related changes in the structure model type and trabecular thickness of human tibial cancellous bone. Bone 2000, 26:291-295.
34. Turner C.H. On Wolff's law of trabecular architecture. J Biomech 1992, 25:1-9.
35. Majumdar S., Kothari M., Augat P., Newitt D.C., Link T.M., Lin J.C., et al. High-resolution magnetic resonance imaging: three-dimensional trabecular bone architecture and biomechanical properties. Bone 1998, 22:445-454.
36. Matsuura M., Eckstein F., Lochmuller E.M., Zysset P.K. The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations. Biomech Model Mechanobiol 2007, 7:27-42.
37. Lochmuller E.M., Kristin J., Matsuura M., Kuhn V., Hudelmaier M., Link T.M., et al. Measurement of trabecular bone microstructure does not improve prediction of mechanical failure loads at the distal radius compared with bone mass alone. Calcif Tissue Int 2008, 83:293-299.
38. Kim D.G., Hunt C.A., Zauel R., Fyhrie D.P., Yeni Y.N. The effect of regional variations of the trabecular bone properties on the compressive strength of human vertebral bodies. Ann Biomed Eng 2007, 35:1907-1913.
39. Lee S.B., Kim H.J., Chun J.M., Lee C.S., Kim S.Y., Kim P.T., et al. Osseous microarchitecture of the scaphoid: Cadaveric study of regional variations and clinical implications. Clin Anat 2012, 25:203-211.
40. Stauber M., Nazarian A., Muller R. Limitations of global morphometry in predicting trabecular bone failure. J Bone Miner Res 2013, (Epub ahead of print).
41. van Lenthe G.H., Huiskes R. How morphology predicts mechanical properties of trabecular structures depends on intra-specimen trabecular thickness variations. J Biomech 2002, 35:1191-1197.
42. Van Sint Jan S., Rooze M. The thenar muscles. New findings. Surg Radiol Anat 1992, 14:325-329.
43. Ohman C., Dall'Ara E., Baleani M., Van Sint Jan S., Viceconti M. The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone. Clin Biomech (Bristol, Avon) 2008, 23:1294-1298.
44. Perilli E., Baleani M., Ohman C., Baruffaldi F., Viceconti M. Structural parameters and mechanical strength of cancellous bone in the femoral head in osteoarthritis do not depend on age. Bone 2007, 41:760-768.
45. Perilli E., Baruffaldi F., Visentin M., Bordini B., Traina F., Cappello A., et al. MicroCT examination of human bone specimens: effects of polymethylmethacrylate embedding on structural parameters. J Microsc 2007, 225:192-200.
46. Ohman C., Baleani M., Perilli E., Dall'Ara E., Tassani S., Baruffaldi F., et al. Mechanical testing of cancellous bone from the femoral head: experimental errors due to off-axis measurements. J Biomech 2007, 40:2426-2433.
47. Serra J. Image Analysis and Mathematical Morphology 1982, Academic Press, London.
48. Ulrich D., van Rietbergen B., Laib A., Ruegsegger P. The ability of three-dimensional structural indices to reflect mechanical aspects of trabecular bone. Bone 1999, 25:55-60.
49. Tassani S., Perilli E. On local micro-architecture analysis of trabecular bone in three dimensions. Int Orthop 2013, 37:1645-1646.
50. Parfitt A.M., Drezner M.K., Glorieux F.H., Kanis J.A., Malluche H., Meunier P.J., et al. Bone histomorphometry: standardization of nomenclature, symbols, and units. Report of the ASBMR Histomorphometry Nomenclature Committee. J Bone Miner Res 1987, 2:595-610.
51. Hildebrand T., Ruegsegger P. A new method for the model-independent assessment of thickness in three-dimensional images. J Microsc 1997, 185:67.
52. Hildebrand T., Ruegsegger P. Quantification of Bone Microarchitecture with the Structure Model Index. Comput Methods Biomech Biomed Engin 1997, 1:15-23.
53. Odgaard A., Gundersen H.J. Quantification of connectivity in cancellous bone, with special emphasis on 3-D reconstructions. Bone 1993, 14:173-182.
54. Harrigan T.P., Mann R.W. Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor. J Mater Sci 1984, 19:761.
55. Whitehouse W.J. The quantitative morphology of anisotropic trabecular bone. J Microsc 1974, 101:153-168.
56. Turner C.H., Cowin S.C., Rho J.Y., Ashman R.B., Rice J.C. The fabric dependence of the orthotropic elastic constants of cancellous bone. J Biomech 1990, 23:549-561.
57. Armitage P., Berry G. Logistic Regression. Statistical methods in medical research 1994, 488-496. Blackwell Scientific Publications, Oxford. B.S. Publications (Ed.).
58. Chapman Hall Predictive Inference: An Introduction 1993, Chapman and Hall/CRC. 1 ed.
59. Nagelkerke N.J.D. A note on the general definition of the coefficient of determination. Biometrika 1991, 78:691-692.
60. Harrigan T.P., Jasty M., Mann R.W., Harris W.H. Limitations of the continuum assumption in cancellous bone. J Biomech 1988, 21:269-275.
61. Silva M.J., Gibson L.J. Modeling the mechanical behavior of vertebral trabecular bone: effects of age-related changes in microstructure. Bone 1997, 21:191-199.
62. Nazarian A., Muller R. Time-lapsed microstructural imaging of bone failure behavior. J Biomech 2004, 37:55-65.
63. Kazakia G.J., Burghardt A.J., Link T.M., Majumdar S. Variations in morphological and biomechanical indices at the distal radius in subjects with identical BMD. J Biomech 2011, 44:257-266.