Assurance Technologies Principles and Practices: A Product, Process, and System Safety Perspective: Second Edition

Assurance Technologies Principles and Practices: A Product, Process, and System Safety Perspective: Second Edition

Volumn , Issue , 2005, Pages 1-472

  Raheja, Dev G ^a   Allocco, Michael ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84889382194     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/047000942X     Document Type: Book

References (355)

1. M. B. Darch, Design Review. In: Reliability and Maintainability of Electronic Systems, J. E. Avsenault and J. A. Roberts (Eds.), Computer Science Press, Potomac, MD, 1980.
2. H. Geenan, Managing, Doubleday, New York, 1984.
3. Ireson, G. W., and C. F. Coombs, Jr., Handbook of Reliability Engineering and Management, McGraw-Hill, New York, 1988.
4. Ohmae, K., The Mind of the Strategist, McGraw-Hill, New York, 1982.
5. Raheja, D., There Is a Lot More to Reliability than Reliability, Society of Automotive Engineers World Congress, Paper 2004-866, 2004.
6. G. J. Hahn and S.S. Shapiro, Statistical Models in Engineering, John Wiley & Sons, Hoboken, NJ, 1967.
7. H. M. Wadsworth, Handbook of Statistical Methods for Scientists and Engineers, McGraw-Hill, New York, 1990.
8. W. Nelson, Applied Life Data Analysis, John Wiley & Sons, Hoboken, NJ, 1982.
9. S. S. Shapiro, How to Test Normality and Other Distributional Assumptions, American Society for Quality Control, Milwaukee, 1980.
10. H. Matsumura, N. Maki, and I. Matsumoto, Strategic Performance of Reliability Evaluation for New Sophisticated VLSI Product. In: Proceedings of International Conference on Quality Control, Union of Japanese Scientists and Engineers, Tokyo, 1987, pp. 649-650.
11. W. Weibull, A Statistical Distribution Function of Wide Applicability, Journal of Applied Mechanics, September 1951, pp. 293-297.
12. C. Lipson and N. Sheth, Statistical Design and Analysis of Engineering Experiments, McGraw-Hill, New York, 1973.
13. L. G. Johnson, The Statistical Treatment of Fatigue Experiment, Elsevier, New York, 1964.
14. M. O. Locks, Reliability, Maintainability, and Availability Assessment, Hayden, Rochelle Park, NJ, 1973.
15. Dixon, W. J., and F. J. Massey, Jr., Introduction to Statistical Analysis, 4th ed., McGraw-Hill, New York, 1983.
16. Gross, A. J., and V. A. Clark, Survival Distributions: Reliability Applications in the Biomedical Sciences, John Wiley & Sons, Hoboken, NJ, 1976.
17. Kapur, K. C., and L. R. Lamberson, Reliability in Engineering Design, John Wiley & Sons, Hoboken, NJ, 1977.
18. Lewis, E. E., Introduction to Reliability Engineering, John Wiley & Sons, Hoboken, NJ, 1987.
19. Nelson, W., Accelerated Life Testing, John Wiley & Sons, Hoboken, NJ, 1990.
20. O'Connor, P. D. T., Practical Reliability Engineering, 2nd ed., John Wiley & Sons, Hoboken, NJ, 1985.
21. M. B. Darch, Chapter 3, in Reliability and Maintainability of Electronic Systems, J. E. Arsenault, and J. A. Roberts (Eds.), Computer Science Press, Potomac, MD, 1980.
22. USAF R&M 2000 Process, Handbook SAF/AQ, U.S. Air Force, Washington, DC, 1987.
23. Reliability Prediction of Electronic Equipment, Mil-Hdbk-217.
24. Specification for Capacitor, fixed, Tentalum, Mil-C-39003.
25. Handbook of Reliability Prediction Procedures for Mechanical Equipment, Eagle Technology for Logistics Division, David Taylor Research Center, Carderock, MD, and Product Assurance and Engineering Directorate, Belvoir Research Development and Engineering Center, Fort Belvoir, VA, 1995.
26. Procedures for Performing a Failure Mode, Effects, and Criticality Analysis, Mil-Std-1629.
27. D. Raheja, Failure Mode and Effects Analysis-Uses and Misuses, ASQC Quality Congress Transactions, 1981.
28. J. T. Duane, Learning Curve Approach to Reliability Monitoring. IEEE Transactions on Aerospace, April 1964.
29. Reliability Growth Management, Mil-Hdbk-189, 1988.
30. C. R. Lipson, and N. Sheth, Statistical Design and Analysis of Engineering Experiments, McGraw-Hill, New York, 1979.
31. P. D. T. O'Connor, Practical Reliability Engineering, John Wiley & Sons, Hoboken, NJ, 1986.
32. Low Cycle Fatigue, Special Technical Publication 942, ASTM, Philadelphia, 1988.
33. Standard General Requirements for Electronics Equipment, Mil-Std-454, Naval Publications and Forms Center, Philadelphia, 1984.
34. Sampling Procedures and Tables for Life and Reliability Testing, Mil-Hdbk-H108, Naval Publications and Forms Center, Philadelphia, 1960.
35. Reliability Testing for Engineering Development, Qualification, and Production, Mil-Std-781D, 1996.
36. Dev G. Raheja, Assurance Technologies-Principles and Practices, McGraw-Hill, New York, 1991.
37. Willie Hammer, Handbook of System and Product Safety, Prentice-Hall, Englewood Cliffs, NJ, 1972.
38. T. B. Sheridan, Humans and Automation: System Design and Research Issues, John Wiley & Sons, Hoboken, NJ, 2002.
39. K. Wong, The Roller-Coaster Curve Is In, Quality and Reliability International, January-March 1989.
40. Arsenault, J. E., and J. A. Roberts, Reliability and Maintainability of Electronic Systems, Computer Science Press, Potomac, MD, 1980.
41. Automated Electronics Reliability Handbook, Publication AE-9, SAE, Warrandale, PA, 1987.
42. Bazovsky, I., Reliability Theory and Practice, Prentice-Hall, Englewood Cliffs, NJ, 1961.
43. Carter, A. D. S., Mechanical Reliability, Macmillan, New York, 1986.
44. Definition of Terms for Reliability and Maintainability, Mil-Std-721; Reliability Design Qualification and Production Acceptance Tests, Mil-Std-781; Reliability Program for Systems and Equipment Development and Production, Mil-Std-785.
45. Fuqua, N. B., Reliability Engineering for Electronic Design, Marcel Dekker, New York, 1987.
46. Ireson, G. W., and C. F. Coombs, Handbook of Reliability Engineering and Management, McGraw-Hill, New York, 1988.
47. Jensen, Finn, and N. E. Petersen, Burn-In, John Wiley & Sons, Hoboken, NJ, 1982.
48. Johnson, L. G., Theory and Technique of Variation Research, Elsevier, Amsterdam, 1964.
49. Johnson, L. G., The Statistical Treatment of Fatigue Experiments, Elsevier, Amsterdam, 1964.
50. Kapur, K. C., and L. R. Lamberson, Reliability in Engineering Design, John Wiley & Sons, Hoboken, NJ, 1977.
51. Lewis, E. E., Introduction to Reliability Engineering, John Wiley & Sons, Hoboken, NJ, 1987.
52. Lipson, C., and N. J. Sheth, Statistical Design and Analysis of Engineering Experiments, McGraw-Hill, New York, 1979.
53. Murphy, R. W., Endurance Testing of Heavy Duty Vehicles, Reliability Assurance Program, Mil-Std-790, Publication SP-506, SAE, Warrandale, PA, 1982.
54. Nelson, W., Applied Life Data Analysis, Wiley-Interscience, New York, 1982.
55. Shooman, M., Probabilistic Reliability: An Engineering Approach, McGraw-Hill, New York, 1968.
56. Singpurwalla, N. D., Inference from Accelerated Life Tests and When Observations Are Obtained from Censored Samples, Technometrics, February 1971, pp. 161-170.
57. Maintainability Prediction, Mil-Hdbk-472, Naval Publications and Forms Center, Philadelphia, 1984.
58. Electronic Reliability Design Handbook, Mil-Hdbk-338, Naval Publications and Forms Center, Philadelphia, 1988.
59. C. S. Pillar, Maintainability in Power Plant Design. In: Proceedings of the Sixth Reliability Engineering Conference for Electric Power Industry, American Society for Quality Control, Milwaukee, 1979.
60. H. Fujiwara, Logic Testing and Design for Testability, MIT Press, Cambridge, MA, 1985.
61. P. K. Lala, Fault Tolerance and Fault Testable Designs, Prentice-Hall, Englewood Cliffs, NJ, 1985.
62. Engineering Design Handbook, Pamphlet AMCP 706-134, Headquarters, U.S. Army Materiel Command, 1970.
63. USAF R&M 2000 Process Handbook SAF/AQ, U.S. Air Force, Washington, DC, 1987.
64. Mil-Std-2165, Testability Program for Electronic Systems and Equipments, 1985.
65. O. E. Ebeling, Reliability and Maintainability Engineering, McGraw-Hill, New York, 1997.
66. D. G. Raheja, Assurance Technologies-Principles and Practices, McGraw-Hill, New York, 1991.
67. W. E. Tarrents, The Measurement of Safety Performance, Garland STPM Press, 1980.
68. M. Allocco, Consideration of the Psychology of a System Accident and the Use of Fuzzy Logic in the Determination of System Risk Ranking. In: Proceedings of the 19th International System Safety Conference, System Safety Society, September 2001.
69. Arsenault, J. E., and J. A. Roberts, Reliability and Maintainability of Electronic Systems, Computer Science Press, Potomac, MD, 1980.
70. Blanchard, B. S., and E. E. Lowery, Maintainability Engineering, Principles and Practices, McGraw-Hill, New York, 1969.
71. Patton, J. D., Maintainability and Maintenance Management, 4th edn., ISA: Instrumentation Systems and Automation Society, Research Triangle Park, North Carolina.
72. Goldman, A. S., and T. B. Slattery, Maintainability, A Major Element of System Effectiveness, John Wiley & Sons, Inc., Hopoken, NJ, 1967.
73. Mil-Std-47IA, Maintainability Verification/Demonstration/Evaluation, 27 March 1973, Superseding Mil-Std-471.
74. Mil-Std-470B, Maintainability Program for Systems and Equipment (current version). System Safety Program Requirement, Mil-Std-882, 1984.
75. D. Raheja, A Different Approach to Design Review. In: Reliability Review, American Society for Quality Assurance, June 1982.
76. System Safety Engineering Guidelines, NAVORD-OD 44942, Naval Ordnance Systems Command, 1992.
77. R. E. Barlow, and F. Proechan, Statistical Theory of Reliability and Lifting (Gordon Pledger, 1142 Hornell Dr., Silver Spring, MD 20904), 1981.
78. W. Hammer, Product Safety Management and Engineering, Prentice-Hall, Englewood Cliffs, NJ, 1980.
79. R. C. Clardy, Sneak Analysis: An Integrated Approach. In: International System Safety Conference Proceedings, 1977.
80. D. Raheja, Testing for Safety. In: Products Liability: Design and Manufacturing Defeat, Lewis Bass (Ed.), McGraw-Hill, New York, 1986.
81. Automatic Sprinkler Performance Tables, Fire Journal, National Fire Protection Association, Boston, July 1970.
82. W. Johnson, MORT Safety Assurance Systems, Marcel Dekker, New York, 1980.
83. W. Hammer, Handbook of System and Product Safety, Prentice-Hall, Englewood Cliffs, NJ, 1972, pp. 63-64.
84. American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, PA 19103.
85. Department of the Air Force, Software Technology Support Center, Guidelines for Successful Acquisition and Management of Software-Intensive Systems: Weapon Systems, Command and Control Systems, Management Information Systems, Version 2, June 1996, Volumes 1 and 2 AFISC SSH 1-1, Software System Safety Handbook, September 5, 1985.
86. Department of Defense, AF Inspections and Safety Center (now the AF Safety Agency), Software System Safety, AFIC SSH 1-1, September 1985.
87. Department of Defense, Standard Practice for System Safety,Mil-Std-882E, Draft, March 2005.
88. Department of Labor, Compliance Guidelines and Enforcement Procedures, OSHA Instructions CPL 2-2.45A, September 1992.
89. Department of Labor, OSHA Regulations for Construction Industry, 29 CFR 1926, July 1992.
90. Department of Labor, OSHA Regulations for General Industry, 29 CFR 1910, July 1992.
91. Department of Labor, Process Safety Management Guidelines for Compliance, OSHA 3133, 1992.
92. Department of Labor, Process Safety Management of Highly Hazardous Chemicals, 29 CFR 1910.119, Federal Register, 24 February 1992.
93. Department of Transportation, Emergency Response Guidebook, DOT P 5800.5, 1990.
94. Electronic Industries Association, System Safety Engineering in Software, EIA-6B, G-48.
95. Environmental Protection Agency, Exposure Factors Handbook, EPA/600/8-89/043, Office of Health and Environmental Assessment, Washington DC, 1989.
96. Environmental Protection Agency, Guidance for Data Usability in Risk Assessment, EPA/540/G-90/008, Office of Emergency and Remedial Response, Washington DC, 1990.
97. Ericson, C. A. II, Hazard Analysis Techniques for System Safety, Wiley-Interscience, Hoboken, NJ, 2005.
98. FAA Safety Risk Management, FAA Order 8040.4.
99. FAA System Safety Handbook: Guidelines and Practices in System Safety Engineering and Management, 2001.
100. Fire Risk Assessment, ASTM STP762, American Society for Testing Materials, Philadelphia, 1980.
101. Human Engineering Design Criteria for Military Systems, Equipment and Facilities, Mil-Std-1472D, 14 March 1989.
102. Institute of Electrical and Electronics Engineers, Standard for Software Safety Plans, IEEE STD 1228, 1994.
103. Interim Software Safety Standard, NSS 1740.13, June 1994.
104. International Electrotechnical Commission, Functional Safety of Electrical/Electronic/ Programmable Electronic Safety-Related Systems, IEC 61508, December 1997.
105. Malasky, S. W., System Safety: Technology and Applications, Garland STPM Press, New York, 1982.
106. NASA, Methodology for Conduct of NSTS Hazard Analyses, NSTS 22254, May 1987.
107. National Fire Protection Association, Properties of Flammable Liquids, Gases and Solids.
108. National Fire Protection Association, Flammable and Combustible Liquids Code.
109. National Fire Protection Association, Hazardous Chemical Handbook.
110. Peters, G. A., and B. J. Peters, Automotive Engineering and Litigation, Garland Press, New York, 1984.
111. Procedures for Performing a Failure Mode, Effects and Criticality Analysis, Mil-Std-1629A, November 1980.
112. Process Safety Management, 29 CFR 1910.119, U.S. Government Printing Office, July 1992.
113. Reliability Prediction of Electronic Equipment, Mil-Hdbk-217A, 1982.
114. Roland, H. E., and B. M. Moriarty, System Safety Engineering and Management, John Wiley & Sons, Hoboken, NJ, 1986.
115. Software Development and Documentation, Mil-Std 498, December 5, 1994.
116. System Safety Program Requirements, Mil-Std 882D, February 10, 2000.
117. Weinstein, A. S., et al., Product Liability and the Reasonably Safe Product, Wiley-Interscience, Hoboken, NJ, 1978.
118. Yellman, T. W., Event-Sequence Analysis. In: Proceedings of the Annual Reliability and Maintainability Symposium, 1975.
119. Total Quality Management: A Guide for Implementation, DoD 6000.51-6 (draft), U.S. Department of Defense, Washington, DC, March 23, 1989.
120. H. E. Vannoy and J. A. Davis, Test Development Using the QFD Approach, Technical Paper 89080, SAE, Warrandale, PA, 1989.
121. J. R. Mauser and D. Clausing, The House of Quality, Harvard Business Review, May-June 1988.
122. R. N. Kackar, Taguchi's Quality Philosophy: Analysis and Commentary, Quality Progress, 1986.
123. D. Shainin, Better than Taguchi Orthogonal Tables, ASQC Quality Congress Transaction, 1986.
124. G. Taguchi, System of Experimental Design, Vols. 1 and 2, D. Clausing (Ed.), Unipub-Kraus International Publications, White Plains, NY, 1987.
125. C. R. Hicks, Fundamental Concepts in the Design of Experiments, McGraw-Hill, New York, 1973.
126. K. R. Bhote, World Class Quality, American Management Association, New York, 1988.
127. G. Taguchi, Development of Quality Engineering, ASI Journal, vol. 1, no. 1, 1988.
128. C. J. Wang, Taguchi's Robust Design Methodology in Quality Engineering, unpublished training booklet, Chrysler Corp., 1989.
129. M. Phadke, Quality Engineering Using Robust Design, Prentice-Hall, Englewood Cliffs, NJ, 1989.
130. R. V. Leon, A. C. Shoemaker, and R. N. Kackar, Performance Measures Independent of Adjustment, Technometrics, vol. 29, no. 3, 1987.
131. G. Taguchi and M. S. Phadke, Quality Engineering Through Design Optimization, Conference Record, IEEE GLOBECOM '84 Meeting, IEEE Communications Society, Atlanta, November 1984.
132. Y. Wu, Reliability Study Using Taguchi Methods, ASI Journal, vol. 2, no. 1, 1989.
133. G. E. P. Box, W. P. Hunter, and J. S. Hunter, Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building, John Wiley & Sons, Hoboken, NJ, 1978.
134. Continuing Process Control and Process Capability Improvement, Ford Motor Co., Dearborn, MI, 1985.
135. J. M. Juran, and F. M. Gryna (Eds.), Quality Control Handbook, McGraw-Hill, New York, 1988.
136. Sampling Procedures and Tables for Inspection by Attributes, Mil-Std-105E, Naval Publications and Forms Center, Philadelphia, 1989. This standard was cancelled. The current preferred standard is Mil-Std-1916.
137. Anderson, V. L., and R. A. McLean, Design of Experiments, Marcel Dekker, New York, 1974.
138. Besterfield, D. H., Quality Control: A Practical Approach, Prentice-Hall, Englewood Cliffs, NJ, 1979.
139. Continuing Process Control and Process Capability Improvement, Ford Motor Co., Dearborn, MI, 1985.
140. Control Chart Methods of Analyzing Data, ASQC Standard B2/ANSI 21.2, American National Standards Institute, New York, 19XX.
141. Deming, W. E., Out of the Crisis, Massachusetts Institute of Technology, Center for Advanced Engineering Study, Cambridge, MA, 1986.
142. Diamond, W. J., Practical Experiment Designs, Van Nostrand Reinhold, New York, 1981.
143. Feigenbaum, A. V., Total Quality Control, 3rd ed., McGraw-Hill, New York, 1983.
144. Grant, E. L., and R. S. Leavenworth, Statistical Quality Control, 5th ed., McGraw-Hill, New York, 19XX.
145. Guide for Quality Control Charts, ASQC Standard Bl/ANSI 21.2, American National Standards Institute, New York, 19XX.
146. Ishikawa, K., Guide to Quality Control, rev. ed., Asian Productivity Organization, 1976.
147. Juran, J. M., Juran on Planning for Qualify, ASQC Quality Press, Milwaukee, 1988.
148. Juran, J. M., and F.M. Gyrna, Jr., Quality Planning and Analysis, McGraw-Hill, New York, 1970.
149. Kearns, D. T., Chasing a Moving Target, Quality Progress, October 1989, pp. 29-31.
150. Ostle, B., and L. C. Malone, Statistics in Research, 4th ed., Iowa State University Press, Ames, 1988.
151. Ott, E. R., An Introduction to Statistical Methods and Data Analysis, Duxbury Press, North Scituate, MA, 1977.
152. Process Qualify Management and Improvement Guidelines, Code No. 500-049, AT&T, Indianapolis, 1988.
153. Sampling Procedures and Tables of Inspection for Variables for Percent Defective, Mil-Std-414.
154. Scherkenbach, W. W., The Deming Route to Quality and Productivity, Roadmaps and Roadblocks, Ceepress Books, Washington, DC, 1986.
155. Schilling, E., Acceptance Sampling in Quality Control, Marcel Dekker, New York, 1982.
156. Shoenberger, R., Japanese Manufacturing Techniques, The Free Press, New York, 1982.
157. Taguchi, G., Introduction to Quality Engineering, Asian Productivity Organization, Unipub-Kraus International Publications, White Plains, NY, 1986.
158. W. Finkelstein, The New Concept and Emerging View of Logistics. In: Logistics in Manufacturing, John Mortimer (Ed.), IPS Publications, Kempston, Bedford, UK, 1988, pp. 201-205.
159. E. J. Lerner, Designing for Supportability, Aerospace America, June 1989.
160. C. O. Coogan, A Systems Approach to Logistics Engineering, Logistic Spectrum, Winter 1985, p. 22.
161. B. Blanchard, Logistics Engineering and Management, Prentice-Hall, Englewood Cliffs, NJ, 1974.
162. Logistic Support Analysis, Naval Forms and Publications Center, Philadelphia, PA 1987, Mil-Std-1388
163. Maintenance Engineering, Planning, and Analysis for Aeronautical Systems, Subsystems, Equipment, and Support Equipment, Mil-Std-2080A(AS).
164. Procedures for Performing a Failure Mode, Effects, and Criticality Analysis, Mil-Std-1629.
165. Level of Repair Analysis, Naval Publications and Forms Center, Philadelphia, PA, Mil-Std-1390.
166. Hanns-Ulrich Pretzch, BMW Logistics: A Step in the Future. In: Logistics in Manufacturing, John Mortimer (Ed.), IFS Publications, Kempston, Bedford, UK, 1988, pp. 145-149.
167. Reliability Centered Maintenance Requirements for Naval Aircraft, Weapon Systems and Support Equipment, Mil-Std-2173(AS).
168. Blanchard, B. S., and E. E. Lowery, Maintainability: Principles and Practices, McGraw-Hill, New York, 1969.
169. Definition of Effectiveness, Terms for Reliability, Maintainability, Human Factors and Safety, Mil-Std-721, Naval Publications and Forms Center, Philadelphia.
170. DoD Requirements for a Logistic Support Analysis Record, Mil-Std-1388-2A, Naval Publications and Forms Center, Philadelphia.
171. Human Engineering Design Criteria for Military Systems, Equipments and Facilities, Mil-Hdbk-1472. Naval Publications and Forms Center, Philadelphia.
172. J. V. McConnell, Understanding Human Behavior, Holt Rinehart Winston, New York, 1980.
173. B. S. Dhillon, Human Reliability with Human Factors, Pergamon Press, New York, 1986.
174. J. W. Gibble and B. H. Moriarty, Human Factors in Accident Causation, lecture notes at University of Southern California, 1981.
175. J.M. Juran and F. M. Gryna, Quality Planning and Analysis, McGraw-Hill, New York, 1980.
176. D. H. Harris and F. B. Chaney, Human Factors in Quality Assurance, John Wiley & Sons, Hoboken, NJ, 1969.
177. A. B. Leslie, Jr. The Human Factor: Implications for Engineers and Managers, Professional Safety, November 1989, pp. 16-18.
178. K. H. E. Kroemer, H. J. Kroemer, and K. E. Kroemer-Elbert, Engineering Physiology-Bases of Human Factors/Ergonomics, 2nd ed., Van Nostrand Reinhold, New York, 1990, p. 1.
179. T. B. Sheridan, Humans and Automation: System Design and Research Issues, John Wiley & Sons, Hoboken, NJ, 2002.
180. W. W. Lowrance, Of Acceptable Risk-Science and the Determination of Safety, William Kaufmann, San Francisco, 1943 and 1976.
181. A. Chapanis, Human Factors in Systems Engineering, John Wiley & Son, Hoboken, NJ, 1996.
182. W. E. Tarrants, The Measurement of Safety Performance, Garland STPM Press, New York, 1980.
183. M. Modarres, What Every Engineer Should Know About Reliability and Risk Analysis, Marcel Dekker, New York, 1993.
184. R. A. Bari and A. Mosleh, Probabilistic Safety Assessment and Management, PSAM 4. In: Proceedings of the 4th International Conference on Probabilistic Safety Assessments and Management, Volume 1, Springer-Verlag, London, 1998.
185. J. A. Forester, K. Kiper, and A. Ramey-Smith, Application of a New Technique for Human Event Analysis (ATHEANA) at a Pressurized Water Reactor. In: Proceedings of the 4th International Conference on Probabilistic Safety Assessments and Management, Springer-Verlag, London, 1998.
186. F. J. Hyu and Y. H. Huang, Human Error Criticality Analysis of Igniter Assembly Behavior.
187. Bass, L., Products Liability: Design and Manufacturing Defects, Shepard's/McGraw-Hill, New York, 1986.
188. Hammer, W., Product Safety Management and Engineering, Prentice-Hall, Englewood Cliffs, NJ, 1980.
189. Johnson, W. G., MORT Safety Assurance Systems, Marcel Dekker, New York, 1980.
190. Joint Army-Navy-Air Force Entering Committee, Human Engineering Guide to Equipment Design, John Wiley & Sons, Hoboken, NJ, 1972.
191. Juran, J. M., Quality Control Handbook, McGraw-Hill, New York, 1987.
192. Kolb, J., and B. S. Boss, Product Safety and Liability, McGraw-Hill, New York, 1980.
193. Lupton, T. (Ed.), Proceedings of First International Conference on Human Factors in Manufacturing, IPS Publications, Kempston, Bedford, UK, 1984.
194. Sanders, M. S., and E. J. McCormick, Human Factors in Engineering and Design, McGraw-Hill, New York, 1987.
195. Swain, A, and H. Guttman, Handbook of Human Reliability Analysis with Emphasis on Nuclear Power Plant Applications, NUREG/CR 1278, Nuclear Regulatory Commission, Washington, DC, 1983.
196. U.S. Army Solicitation No. DAH CO6-85-R-0018.
197. E. C. Soistman and K. B. Ragsdale, Impact of Hardware/Software Faults on System Reliability, Report No. OR 18,173, Griffiths Air Force Base, Rome Air Development Center, Rome, NY, 1985.
198. Defense System Software Development, DoD-Std-2167A, 1986.
199. System Safety Program Requirements, Mil-Std-882B, Naval Publications and Forms Center, Philadelphia. Mil-Std-882E is in the process.
200. General Electric Co., Software Engineering Handbook, McGraw-Hill, New York, 1986.
201. F. Brooks, No Silver Bullet: Essence and Accidents of Software Engineering, Computer, April 1987.
202. A Standard Classification for Software Errors, Faults and Failures, IEEE Draft Standard No. P1044/D3, IEEE, New York, December 1987.
203. D. Raheja, Software FMEA: A Missing Link in Design for Robustness, SAE World Congress Conference, 2005.
204. R. C. Clardy, Sneak Analysis: An Integrated Approach. In: International System Safety Conference Proceedings, 1977.
205. W.L. Chenoweth, Oral Presentation, In: IEEE Conference on Computer Assurance, IEEE Computer Software Assurance Conference, COMPSAC 86, Washington, DC, 1986.
206. Software System Safety Handbook, AFISC SSH 1-1, U.S. Air Force Inspection and Safety Center, Norton Air Force Base, Calif., 1985.
207. N. Leveson, Safety Analysis Using Petri Nets, IEEE Transactions on Software Engineering, 1986.
208. S. Mattern, Confessions of a Modern-Day Software Safety Analysis. In: Proceedings of the Ninth International System Safety Conference, Long Beach, California, 1989. Group Meeting, June 1989.
209. A. L. Goel and K. Okumoto, A Time Dependent Error Rate Model for Software Reliability and Other Performance Measures, IEEE Transactions on Reliability, no. R-28, pp. 206-211, 1979.
210. G. Sagols and J. L. Albin, Reliability Models and Software Development, A Practical Approach. In: Software Engineering: Practice and Experience, E. Girard (Ed.), Oxford Publishing, Oxford, UK, 1984.
211. Reliability Qualification and Production Approval Tests, Mil-Std-781, Naval Publications and Forms Center, Philadelphia.
212. G. Myers, Software Reliability: Principles and Practice, John Wiley & Sons, Hoboken, NJ, 1976.
213. Mil-Std-882C.
214. P. P. Howley, Jr., A Comprehensive Software Testing Methodology. In: IEES Workshop on Software Engineering Standards, San Francisco, 1983.
215. R. P. Morton, The Application of Software Development Standards to Software Maintenance Tasks. In: IEEE Workshop on Software Engineering Standards, 1983.
216. D. H. Longstreet, Software Maintenance and Computers, IEEE Computer Society Press, New York, 1990.
217. Definitions of Effectiveness Terms for Reliability, Maintainability, Human Factors, and Safety, Mil-Std-721.
218. DoD Directive 5000.51-G.
219. F. A. Tillman, C. L. Hwang, and Way Kuo, System Effectiveness Models: An Annotated Bibliography, IEEE Transactions on Reliability, no. R-29, October 1980.
220. ARINC Research Corp., Reliability Engineering, Prentice-Hall, Englewood Cliffs, NJ, 1964.
221. Weapon Systems Effectiveness Industry Advisory Committee, AFSC-TR-65, vols. I, II, and III, U.S. Air Force Systems Command, Andrews Air Force Base, MD, 1966.
222. Naval System Effectiveness Manual, Technical Document 251 (NBLC/TD261), Naval Electronics Laboratory Center, San Diego, 1973.
223. Product Assurance-Army Materiel Reliability, Availability, and Maintainability, AR 702-3, Department of the Army, Washington DC, 1973, revised 1976.
224. Reliability Program for Systems and Equipment Development and Production, Mil-Std-785.
225. Maintainability Program Requirements, Mil-Std-470.
226. Quality Program Requirements, Mil-Q-9858.
227. Logistic Support Analysis, Mil-Std-1388; and Logistic Support Analytic Records, Mil-Std-1388-2A.
228. L. Benner and K. Hendrich, Investigating Accidents with STEP, Marcel Dekker, New York, 1987.
229. W. Hammer, Handbook of System and Product Safety, Prentice-Hall, Englewood Cliffs, NJ, 1972.
230. Suh Pyo Nam, Axiomatic Design: Advances and Applications, Oxford University Press, New York, 2001.
231. E. C. Ebeling, An Introduction to Reliability and Maintainability Engineering, McGraw-Hill, New York, 1997.
232. Anenault, J. L., and J. A. Roberts (Eds.), Reliability and Maintainability of Electronic Systems, Computer Science Press, Potomac, MD, 1980.
233. Booth, G. M., The Design of Complex Information Systems, McGraw-Hill, New York, 1983.
234. Chapanis, A., Human Factors in System Engineering, John Wiley & Sons, Hoboken, NJ, 1996.
235. Electronic Reliability Design Handbook, Mil-Hdbk-338.
236. Farry, K. A., and I. F. Hooks, Customer-Centered Products: Creating Successful Products Through Smart Requirements Management, AMACOM, American Management Association, 2001.
237. Hammer, W., Handbook of System and Product Safety, Prentice-Hall, Englewood Cliffs, NJ, 1972.
238. Johnson, W., MORT Safety Assurance Systems, Marcel Dekker, New York, 1980.
239. Proceedings of the Reliability and Maintainability Conference, annual publication, IEEE, New York.
240. Sheridan, T. B., Humans and Automation: System Design and Research Issues, John Wiley & Sons, Hoboken, NJ, 2002.
241. Suh Pyo Nam, Axiomatic Design: Advances and Applications, Oxford University Press, New York, 2001.
242. Yourdon, E. Modern Structured Analysis, P.T.R. Prentice-Hall, Englewood Cliffs, NJ, 1998.
243. J. V. Grimaldi and R. H. Simonds, Safety Management, 3rd ed., Richard D. Irwin, Inc., Homewood, IL, 1975.
244. J. Stephenson, System Safety 2000, A Practical Guide for Planning, Managing, and Conducting System Safety Programs, Van Nostrand Reinhold, New York, 1991.
245. System Safety Society, System Safety Analysis Handbook, Unionville, Virginia, July 1997.
246. Allocco, M., Automation, System Risks and System Accidents. In: Proceedings of the 17th International System Safety Conference, System Safety Society, August 1999.
247. Allocco, M., Computer and Software Safety Considerations in Support of System Hazard Analysis. In: Proceedings of the 21st International System Safety Conference, System Safety Society, August 2003.
248. Allocco, M., W. E. Rice, and R. P. Thornburgh. System Hazard Analysis Utilizing a Scenario-Driven Technique. In: Proceedings of the 20th International System Safety Conference, System Safety Society, September 2001.
249. Anderson, D. R., D. J. Sweeney, and T. A. Williams, An Introduction to Management Science Quantitative Approaches to Decision Making, West Publishing, Belmont, CA, 1976.
250. American Society for Testing Materials, Fire Risk Assessment, ASTM STP762, 1980.
251. Bahr, N. J., System Safety Engineering and Risk Assessment: A Practical Approach, Taylor and Francis, Philadelphia, PA, 1997.
252. Chapanis, A., Human Factors in Systems Engineering, John Wiley & Son, Hoboken, NJ, 1996.
253. Clemens, P. L., A Compendium of Hazard Identification and Evaluation Techniques for System Safety Application, Hazard Prevention, March/April, 1982.
254. Cooper, J. A., Fuzzy-Algebra Uncertainty Analysis, Journal of Intelligent and Fuzzy Systems, vol. 2, no. 4, 1994.
255. DEF(AUST) 5679, Army Standardization (ASA), The Procurement of Computer-Based Safety Critical Systems, May 1999.
256. Department of Labor, OSHA Regulations for General Industry, 29 CFR 1910, July 1992.
257. Department of Labor, Process Safety Management of Highly Hazardous Chemicals, 29 CFR 1910.119, Federal Register, 24 February 1992.
258. Department of Labor, OSHA Regulations for Construction Industry, 29 CFR 1926, July 1992.
259. Department of Labor, Process Safety Management Guidelines for Compliance, OSHA 3133, 1992.
260. Ebeling, C. E., An Introduction to Reliability and Maintainability Engineering, McGraw-Hill, New York, 1997.
261. Electronic Industries Association, EIA-6B, G-48, System Safety Engineering in Software Electrical/Electronic/Programmable Electronic Safety-Related Systems, Draft 61508-2 Ed 1.0, 1998.
262. Endsley, M. R., Situation Awareness and Human Error: Designing to Support Human Performance. In: Proceedings of the High Consequence Systems Surety Conference, Albuquerque, NM, 1999.
263. Environmental Protection Agency, Exposure Factors Handbook, EPA/600/8-89/043, Office of Health and Environmental Assessment, Washington DC, 1989.
264. Environmental Protection Agency, Guidance for Data Usability in Risk Assessment, EPA/540/G-90/008, Office of Emergency and Remedial Response, Washington DC, 1990.
265. Everdij, M. H. C., and H. A. P. Blom, Safety Assessment Techniques Database, Version 0.3, March 2005.
266. FAA Safety Risk Management, FAA Order 8040.4.
267. FAA, System Safety Handbook: Practices and Guidelines for Conducting System Safety Engineering and Management, Revised: September 30, 2001.
268. Hammer, W., Occupational Safety Management and Engineering, 2nd ed., Prentice-Hall, Englewood Cliffs, NJ, 1981.
269. Heinrich, H. W., D. Petersen, and N. Roos, Industrial Accident Prevention: A Safety Management Approach, 5th ed., McGraw-Hill, New York, 1980.
270. Institute for Electrical and Electronic Engineers, Standard for Software Safety Plans, IEEE Std 1228, 1994.
271. International System Safety Conference, Proceedings through 23rd.
272. Johnson, W. G., MORT-The Management Oversight and Risk Tree, SAN 821-2, U.S. Atomic Energy Commission, 12 February 1973.
273. Joint Services Computer Resources Management Group, Software System Safety Handbook: A Technical and Managerial Team Approach, Published on Compact Disc, December 1999.
274. Leveson, N., SAFEWARE: System Safety and Computers, A Guide to Preventing Accidents and Losses Caused by Technology, Addison Wesley, Boston, 1995.
275. Martin, L., and J. Orasanu, Errors in Aviation Decision Making: A Factor in Accidents and Incidents, HESSD, 1998.
276. Modarres, M., What Every Engineer Should Know About Reliability and Risk Analysis, Marcel Dekker, New York, 1993.
277. Moriarty, B., and H. E. Roland, System Safety Engineering and Management, 2nd ed., John Wiley & Sons, Hoboken, NJ, 1990.
278. NASA Dryden Policy Directive, DPD-8740.1A, Range Safety Policy for Dryden Flight Research Center (DFRC), July 2000.
279. NASA NSTS 22254, Methodology for Conduct of NSTS Hazard Analyses, May 1987.
280. Nguyen, L., Unmanned Aircraft System Safety and Operational Safety Assessments Considerations, White Paper, RTCA SC-203 Safety Assessment Subgroup, March 15, 2005.
281. Nuclear Regulatory Commission (NRC), Safety/Risk Analysis Methodology, April 12, 1993.
282. Process Safety Management, 29 CFR 1910.119, U.S. Government Printing Office, Washington DC, July 1992.
283. Radio Technical Commission for Aeronautics (RTCA) DO-264, Operational Safety Assessment for the Approval of the Provision and Use of Air Traffic Services Supported by Data Communications.
284. Raheja, D. G., Assurance Technologies: Principles and Practices, McGraw-Hill, New York, 1991.
285. RTCA-DO 178B, Software Considerations in Airborne Systems and Equipment Certification, December 1, 1992; COMDTINST M411502D, System Acquisition Manual, December 27, 1994; DODD 5000.1, Defense Acquisition, March 15, 1996.
286. Sheridan, T. B., Humans and Automation: System Design and Research Issues, John Wiley & Sons, Hoboken, NJ, 2002.
287. Society of Automotive Engineers, Aerospace Recommended Practice 4754: Certification Considerations for Highly Integrated or Complex Aircraft Systems, November 1996.
288. Society of Automotive Engineers, Aerospace Recommended Practice 4761: Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment, December 1996.
289. System Safety Program Requirements, Mil-Std 882D, February 10, 2000.
290. Tarrants, W. E., The Measurement of Safety Performance, Garland STPM Press, New York, 1980.
291. U.K. Ministry of Defense, Defense Standard 00-55: Requirements for Safety Related Software in Defense Equipment, Issue 2, 1997.
292. U.K. Ministry of Defense, Defense Standard 00-56: Safety Management Requirements for Defense Systems, Issue 2, 1996.
293. U.K. Ministry of Defense, Interim DEF STAN 00-54: Requirements for Safety Related Electronic Hardware in Defense Equipment, April 1999.
294. C. E. Ebeling, An Introduction to Reliability and Maintainability Engineering, McGraw-Hill, New York, 1997.
295. T. B. Sheridan, Humans and Automation: System Design and Research Issues, John Wiley & Sons, Hoboken, NJ, 2002.
296. K. Ishikawa, Guide to Quality Control, Asian Productivity Organization, 1982.
297. W. E. Tarrants, The Measurement of Safety Performance, Garland Publishing, 1980.
298. K. Ishikawa, Guide to Quality Control, JUSE Press Ltd., Tokyo, 1994.
299. R. L. Brauer, Safety and Health for Engineers, Van Nostrand Reinhold, New York, 1990.
300. M. Brassard, The Memory Jogger, A Pocket Guide of Tools for Continuous Improvement, 2nd ed., GOAL/QPC, Methuen, MA, 1988.
301. E. Kreyszig, Advanced Engineering Mathematics, 7th ed., John Wiley & Sons, Hoboken, NJ, 1993.
302. J. O. Accrocco, The MSDS Pocket Dictionary, Genium Publishing, Schenectady, NY, 1991.
303. American Conference of Governmental Industrial Hygienists (ACGIH) Handbook, current version of: Documentation of the TLVs and BEIs with Worldwide Occupational Exposure Values CD-ROM-2005, Single User Version, 2005. ACGIH, 1330 Kemper Meadow Drive, Cincinnati, Ohio.
304. 29 CFR Part 1910.106 OSHA Flammable/Combustible Liquid Classification.
305. 29 CFR Part 1910, Subpart Z, Toxic and Hazardous Substances (the Z list).
306. 29 CFR Part 1910.1030, OSHA Blood borne Pathogens Standard, 1991.
307. W. Hammer, Handbook of System and Product Safety, Prentice-Hall, Englewood Cliffs, NJ, 1972.
308. Allocco, M., Hazards in Context with System Risks. In: Proceedings of the 23rd International System Safety Conference, System Safety Society, April 2005.
309. Allocco, M., and J. F. Shortle, Applying Qualitative Hazard Analysis to Support Quantitative Safety Analysis for Proposed Reduce Wake Separation CONOPS. In: Proceedings of the NASA/FAA ATM (Air Traffic Management) Workshop, Baltimore, MD, June 2005.
310. Allocco, M., Key Concepts and Observations Associated with a Safety Management System. In: Proceedings of the 22nd International System Safety Conference, System Safety Society, August 2004.
311. Allocco, M., Computer and Software Safety Considerations in Support of System Hazard Analysis. In: Proceedings of the 21st International System Safety Conference, System Safety Society, August 2003.
312. Allocco, M., and R. P. Thornburgh, A Systemized Approach Toward System Safety Training with Recommended Learning Objectives. In: Proceedings of the 20th International System Safety Conference, System Safety Society, August 2002.
313. Allocco, M., W. E. Rice, and R. P. Thornburgh, System Hazard Analysis Utilizing a Scenario Driven Technique. In: Proceedings of the 20th International System Safety Conference, System Safety Society, August 2002.
314. Allocco, M., Consideration of the Psychology of a System Accident and the Use of Fuzzy Logic in the Determination of System Risk Ranking. In: Proceedings of the 19th International System Safety Conference, System Safety Society, September 2001.
315. Allocco, M., Appropriate Applications Within System Reliability Which Are in Concert with System Safety; The Consideration of Complex Reliability and Safety-Related Risks Within Risk Assessment. In: Proceedings of the 17th International System Safety Conference, System Safety Society, August 1999.
316. Allocco, M., Automation, System Risks and System Accidents. In: Proceedings of the 17th International System Safety Conference, System Safety Society, August 1999.
317. Allocco, M., Development and Applications of the Comprehensive Safety Analysis Technique, Professional Safety, December 1997.
318. Allocco, M., Hazard Control Considerations in Computer Complex Designs, Professional Safety, March 1990.
319. Allocco, M., Focus on Risk, Safety & Health, September 1988.
320. Allocco, M., Chemical Risk Assessment and Hazard Control Techniques, National Safety News, April 1985.
321. Allocco, M., Hazard Recognition for the Newcomer, National Safety News, December 1983.
322. Suh Pyo Nam, Axiomatic Design: Advances and Applications, Oxford University Press, New York, 2001.
323. Raheja, D.G., assurance Technologies Principles and Practices, First Edition, McGraw-Hill, Inc., New York, 1991.
324. A. T. Lee, T. Gunn, T. Pham, and R. Ricaldi. NASA Technical Memorandum 104799, Software Analysis Handbook: Software Complexity Analysis and Software Reliability Estimation and Prediction, August 1994.
325. Adrian, W. R., M. A. Brans, and J. C. Cherniavaky, Validation, Verification, and Testing of Computer Software, Special Publication 500-75, National Bureau of Standards, Gaithersburg, MD, February 1981.
326. Allocco, M., Computer and Software Safety Considerations in Support of System Hazard Analysis. In: Proceedings of the 21st International System Safety Conference, System Safety Society, August 2003.
327. ANSI/IEEE STD 1002-1992, IEEE Standard Taxonomy for Software Engineering Standards.
328. Chikofsky, E. J., Computer-Aided Software Engineering, IEEE Computer Society Press, New York, 1988.
329. Chow, T. S., Software Quality Assurance: A Practical Approach, IEEE Computer Society Press, New York, 1985.
330. Curtis, B., Human Factors in Software Development, IEEE Computer Society Press, New York, 1986.
331. Defense System Software Development Handbook, DoD-Hdbk-287, Naval Publications and Forms Centers, Philadelphia, February 29, 1988.
332. Department of Defense, Military Standard Defense System Software Development, DoD-Std 2167 A, February 29, 1988.
333. Donahoo, J. D., and D. Swearinger. A Review of Software Maintenance Technology, Report RADC-TR-80-13, Rome Air Development Center, Rome, NY, 1980.
334. Dunn, R., and R. Ullman. Quality Assurance for Computer Software, McGraw-Hill, New York, 1981.
335. Electronic Industries Association, EIA-6B, G-48, System Safety Engineering in Software Development, 1990.
336. Freeman, P., Software Reusability, IEEE Computer Society Press, New York, 1987.
337. Glass, R. L., Checkout Techniques, Software Reliability Guidebook, Prentice-Hall, Englewood Cliffs, NJ, 1979.
338. Handbook for Software in Safety-Critical Applications, English edition, Swedish Armed Forces, Defense Material Administration, March 15, 2005.
339. Herrmann, D. S., Software Safety and Reliability, IEEE Computer Society Press, Los Alamitos, 1999.
340. IEEE Standard Dictionary of Measures to Product Reliable Software, IEEE Standard 982.1-1988, IEEE, New York, 1988.
341. IEEE Standard for Software Reviews and Audits, IEEE Standard 1028-1988, IEEE, New York, 1988.
342. IEEE Standard for Software Safety Plans, IEEE Standard 1228, IEEE, New York, 1994.
343. IEEE Standard for Software Test Documentation, IEEE Standard 829, IEEE New York, 1983.
344. IEEE Guide to Software Requirements Specification, IEEE Standard 830, IEEE, New York, 1984.
345. Leveson, N., Safeware: System Safety and Computers, Addison-Wesley, Boston, 1995.
346. Musa, J. D., A. Lannine, and K. Okumotoko, Software Reliability: Measurement, Prediction, Application, McGraw-Hill, New York, 1987.
347. Myers, G. J., The Art of Software Testing, John Wiley & Sons, Hoboken, NJ, 1979.
348. NASA-Std-8719.13A, Software Safety, September 1997.
349. Reviews and Audits for Systems, Equipment, and Computer Programs, Mil-Std-1521B, Naval Publications and Forms Center, Philadelphia.
350. RTCA-DO 178B, Software Considerations in Airborne Systems and Equipment Certification, December 1, 1992.
351. RTCA-DO 278B, Guidelines foe Communication, Surveillance, Air Traffic Management (CNS/ATM) System Software Integrity Assurance, 2004.
352. Shooman, M., Software Engineering-Design, Reliability, Management, McGraw-Hill, New York, 1983.
353. Software Qualify Evaluation, DoD-Std-2168, Naval Publications and Forms Center, Philadelphia.
354. Storey, N., Safety-Critical Computer Systems. Addison-Wesley, Boston, 1996.
355. System Safety Program Requirements, Mil-Std-882, Naval Publications and Forms Center, Philadelphia, 1984.