Low consistency refining of eucalyptus pulp: Effects on surface chemistry and interaction with FWAs

BioResources

Volumn 8, Issue 4, 2013, Pages 5995-6013

  Mou, Hong yan ^a,b   Li, Bin ^c   Heikkilä, Elina ^a   Iamazaki, Eduardo ^a   Zhan, Huai yu ^b   Fardim, Pedro ^a,d  

^a ÅBO AKADEMI UNIVERSITY   (Finland)

^b SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^c QINGDAO INSTITUTE OF BIOENERGY AND BIOPROCESS TECHNOLOGY   (China)

^d KING ABDULAZIZ UNIVERSITY   (Saudi Arabia)

Author keywords

Calcium sulfate; Fluorescent whitening agents; Low consistency refining; ToF SIMS; XPS

Indexed keywords

ADSORPTION; CALCIUM; CHEMICAL ANALYSIS; FLUORESCENCE; HYDROPHOBICITY; OPTICAL PROPERTIES; REFINING; SECONDARY ION MASS SPECTROMETRY; SURFACE ANALYSIS; SURFACE CHEMISTRY; X RAY PHOTOELECTRON SPECTROSCOPY;

CALCIUM SULFATE; FLUORESCENT WHITENING AGENTS; HYDROPHOBIC INTERACTIONS; LABORATORY REFINING; LOW CONSISTENCY; SURFACE ANALYSIS TECHNIQUES; SURFACE CHEMICAL COMPOSITION; TOF SIMS;

PULP REFINING;

ADSORPTION; CALCIUM SULFATE; CHEMISTRY; ESCA; FLUORESCENCE; REFINING; SURFACE PROPERTIES; X RAY SPECTROSCOPY;

EUCALYPTUS;

EID: 84887198154     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.8.4.5995-6013     Document Type: Article

References (34)

1. Alén, R. (2007). Papermaking Chemistry, Finnish Paper Engineers Association, Espoo, Finland.
2. Asikainen, S., Fuhrmann, A., Ranua, M., Robertsén, L.(2010). "Effect of birch kraft pulp primary fines on bleaching and sheet properties" BioResources 5(4), 2173-2183.
3. Bäckström, M., Kolar, M. C., and Htun, M. (2008). "Characterisation of fines from unbleached kraft pulps and their impact on sheet properties" Holzforschung 62(5), 546-552.
4. Berthold, J., and Salmén, L. (1997). "Effects of mechanical and chemical treatments on the pore-size distribution in wood pulps examined by inverse size-exclusion chromatography"J. Pulp Pap. Sci. 23(6), 245-253.
5. Buchanan, J. G., and Washburn, O. V. (1962). "The surface and tensile fractures of chemical fiber handsheets as observed with the scanning electron microscope" Pulp. Paper Mag. Can. 63(10), T485-T493.
6. El-Sharkawy, K., Koskenhely, K., and Paulapuro, H. (2008). "The fractionation and refining of eucalyptus kraft pulps" Nord. Pulp Pap. Res. J. 23(2), 172-180.
7. Fardim, P., and Durán, N. (2000). "Surface characterisation of unbleached eucalyptus kraft pulp using XPS and TOF-SIMS" Proc. 6th European Workshop Lignocellulosics Pulp, Bordeaux, September 3-6, p. 307.
8. Fardim, P., Gustafsson, J., and Schoultz, S. (2005). "Extractives on fiber surfaces investigated by XPS, ToF-SIMS, and AFM" Colloids Surf. A. 255(1-3), 91-103.
9. Hubbe, M.A., and Rojas, O.J. (2008). "Colloidal stability and aggregation of lignocellulosic materials in aqueous suspension: A review" BioResources 3(4), 1419-1491.
10. Iamazaki, E., and Atvars, D. Z. (2007). "Sorption of a fluorescent whitening agent (tinopal CBS) onto modified cellulose fibers in the presence of surfactants and salt" Langmuir 23(26), 12886-12892
11. Kangas, H. (2007). "Surface chemical and morphological properties of mechanical pulps, fibers and fines" PhD Thesis, 1.12. Helsinki University of Technology, Finland.
12. Kleen, M. (2000) "Surface chemistry of kraft pulp fibers during TCF bleaching studied by ToF-SIMS" Proc. 6th European Workshop Lignocellulosics Pulp, Bordeaux, September 3-6, p. 41-44.
13. Krässig, H. A. (1993). Cellulose-Structure, Accessibility and Reactivity, Gordon and Breach Science Publishers, Yverdon.
14. Laine, C., Wang, X., Tenkanen, M., and Varhimo, A. (2004). "Change in the fiber wall during refining of bleached pine kraft pulp" Holzforschung 58(3), 233-240.
15. Laine, J., Stenius, P., Carlsson, G., and Ström, G. (1994). "Surface characterization of unbleached kraft pulps by means of ESCA" Cellulose 1(2), 145-160.
16. Laine, J., Stenius, P., Carlsson, G., and Ström, G. (1996) "The effect of ECF and TCF bleaching on the surface chemical composition of kraft pulp as determined by ESCA" Nord. Pulp Pap. Res. J. 11(3), 201-210.
17. Li, B., Bandekar, R., Zha, Q., Alsaggaf, A., and Ni, Y. (2011a). "Fiber quality analysis: OpTest fiber quality analyzer versus L&W fiber tester" Industrial & Engineering Chemistry Research 50(22), 12572-12578.
18. Li, B., Li, H., Zha, Q., Bandekar, R., Alsaggaf, A., and Ni, Y. (2011b). "Review: Effects of wood quality and refining process on TMP pulp and paper quality" BioResources 6(3), 3569-3584.
19. Mohlin, U.-B., and Miller, J. (1992). "Influence of industrial beating on fiber swelling and fiber shape" AICELCA, May 19-22, Bologna, Italy.
20. Mohlin, U.-B., and Miller, J. (1995). "Industrial refining: Effects of refining conditions on fiber properties" 3rd International Refining Conference and Exhibition, March, 20-22, Atlanta, Paper 4.
21. Mou, H. Y., Iamazaki, E., Zhan, Y., Orblin, E., and Fardim, P. (2013). "Softwood fiber topochemistry" BioResources 8(2), 2325-2336.
22. Orblin, E., and Fardim, P. (2010)."Surface chemistry of deinked pulps as analysed by XPS and ToF-SIMS" Surf. Interface Anal. 42, 1712-1722.
23. Orblin, E., and Fardim, P. (2011). "Interactions between cationic polyelectrolyte and pulp fines" BioResources 6(3), 2340-2355.
24. Page, D. H., Baker, C.F., and Punton, V. W. (1989). Fundamentals of Papermaking, Mechanical Engineering Publications, London.
25. Roberts, J. C. (1992). Paper Chemistry, Blackie Academic and Professional, London.
26. Shen, Y. J. (2004). Fluorescent Whitening Agent, Chemical Industrial Press, Beijing.
27. Shi, H., Liu, H., Ni, Y., Yuan, Z., Zou, X., and Zhou, Y. (2012). "Review: Use of optical brightening agents (OBAs) in the production of paper containing high-yield pulps" BioResources 7(2), 2582-2591.
28. Stana, K. K., Pohar, C., and Ribitsch, V. (1995). "Adsorption of whitening agents on cellulose fibers monitored by streaming potential measurements, calorimetry and fluorescence" Colloid Polym Sci. 273(12), 1174-1178.
29. Ström, G., and Carlsson, J. (1992). "Wettability of kraft pulps: Effects of surface composition and oxygen plasma treatment" Adhes. Sci. Technol. 6(6), 745-761.
30. Touzinsky, G. F., Baker, F. L., Cunningham, R. L., and Bagby, M. O. (1977). "Scanning electron microscopy of kenaf paper structures" J. Agric. Food Chem. 25(4), 734-738.
31. Wang, F., Tanaka, H., Kitaoka, T., and Hubbe, M. A. (2000). "Distribution characteristics of rosin size and their effect on the internal sizing of paper" Nord. Pulp Paper Res. J. 15(5), 416-421.
32. Yamaki, S. B., Barros, D. S., Garcia, C. M., Socoloski, P., Oliveira, O. N., and Atvars, T. D. Z. (2005). "Spectroscopic studies of the intermolecular interactions of Congo red and tinopal CBS with modified cellulose fibers" Langmuir 21(2), 5414-5420.
33. Zhang, H., He, Z., Ni, Y., Hu, H., and Zhou, Y. (2009). "Using optical brightening agents (OBA) for improving the optical properties of HYP-Containing paper sheets" Pulp and paper Canada 110 (8), 20-24.
34. Zhang, H., Hui, L., and Ni, Y. (2010). "Adsorption behaviors of optical brightening agents and precipitated calcium carbonate onto pulp fibers" Industrial & Engineering Chemistry Research 49(19), 9407-9412.