Engineered nanoparticle release, exposure pathway and dose, measures and measuring techniques for nanoparticle exposure in air

Safety Aspects of Engineered Nanomaterials

Volumn , Issue , 2013, Pages 99-134

  Fißan, Heinz ^a,b   Horn, Hans Georg ^c  

^a Institute of Energy and Environmental Technology   (Germany)

^b UNIVERSITY OF DUISBURG ESSEN   (Germany)

^c TSI GmbH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ENGINEERED NANOPARTICLES; EXPOSURE PATHWAYS; MEASURING TECHNIQUE; NANOPARTICLE EXPOSURES;

NANOPARTICLES;

EID: 84887023251     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.4032/9789814364867     Document Type: Chapter

References (49)

1. Paur, H.-R.; Cassee, F. R., Teeguarden, J., Fissan, H., Diabate, S., Aufderheide, M., Kreyling, W. G., Hänninen, O., Kasper, G., Riediker, M., Rothen-Rutishauser, B., and Schmid, O. (2011). In-vitro cell exposure studies for the assessment of nanoparticle toxicity in the lung-a dialog between aerosol science and biology, J. Aerosol Sci., 42, pp. 668-692.
2. Poland, C. A., Duffin, R., Kinloch, I., Maynard, A., Wallace, W. A., Seaton, A., Macnee, W., and Donaldson, K. (2008). Carbon nanotubes introduced into the abdominal cavity of mice show asbestos-like pathogenicity in a pilot study. Nat. Nanotechnol., 3, pp 423-428.
3. Oberdörster, G. (1996). Significance of particle parameters in the evaluation of exposure-dose response relationships of inhaled particles. Particulate Sci. Technol., 14, pp. 135-151.
4. Kuhlbusch, T. A. J., Asbach, C., Fissan, H., Göhler, D., and Stintz, M. (2011). Nanoparticle exposure at nanotechnology workplaces: A review. Particle Fibre Toxicol., 16, pp. 8-22.
5. ISO (2008). ISO/TS 27687: Nanotechnologies-Terminology and definitions for nano-objects-Nanoparticle, nanofibre and nanoplates.
6. ISO (2013). ISO/NP TS 12921: Nanotechnologies-Terminology and definitions for nanostructured materials. In preparation, Feb 2013: still not published.
7. Schneider, T., Brouwer, D. H., Koponen, I. K., Jensen, K. A., Fransmann, W., van Duuren-Stuurman, B., van Tongeren, M., Tielemans and E. (2011). Conceptual model for assessment of inhalation exposure to manufactured nanoparticles. J. Exp. Sci. Environ. Epidem., 21, pp. 1-14.
8. ISO (2010). ISO/DIS 12025: Nanomaterials-Quantification of nanoobject release from powders by generation of aerosols.
9. Kuhlbusch, T. A. J., Rating, U., van der Zwaag, T., Fissan, H., and Asbach, C. (2008). Modelling of physical processes during dispersion of nanoparticles from a leak. Proc. Eur. Aerosol Conf., Thessaloniki. Abstract T01A023O.
10. 2 nanoparticles in hairless mice and porcine skin after subchronic dermal exposure. Toxicol. Lett., 191(1), pp. 1-8.
11. Zvyagin, A. V., Zhao, X., Gierden, A., Sanchez, W., Ross, J. A., and Roberts, M. S. (2008). Imaging of zinc oxide nanoparticle penetration in human skin in vitro and in vivo. J. Biomed. Opt., 13, p. 64031.
12. ICRP (1994). Publication 66-Human respiratory tract model for radiological protection. Ann. ICRP, 24. Pergamon.
13. Waters, K. M., Masiello, L. M., Zangar, R. C., Tarasevich, B. J., Karin, N. J., Quesenberry, R. D., Bandyopadhyay, S., Teeguarden, J. G., Pounds, J. G., and Thrall, B. D. (2009). Macrophage responses to silica nanoparticles are highly conserved across particle sizes. Toxicol. Sci., 107, pp. 553-569.
14. 2 and carbonaceous particles scales best with BET surface area. Environ. Health Perspect., 115, pp. 187-194.
15. Ferron, G. A., Kreyling, W. G., and Haider, B. (1988). Inhalation of salt aerosol particles-II. Growth and deposition in the human respiratory tract. J. Aerosol Sci., 19, pp. 611-631.
16. Hofmann, W. (1996). Modelling techniques for inhaled particle deposition: the state of the art. J. Aerosol Med., 9, pp. 369-388.
17. Asbach, C., Fissan, H., Stahlmecke, B., Kuhlbusch, T. A. J., and Pui., D.Y.H. (2009). Conceptual limitations and extensions of lung-deposited nanoparticle surface area monitor (NSAM). J. Nanoparticle Res., 11, pp. 101-109.
18. Fissan, H., Neumann, S., Trampe, A., Pui, D. Y. H., and Shin, W.G. (2007). Rationale and principle of an instrument measuring lung deposited nanoparticle surface area. J. Nanoparticle Res., 9, pp. 53-59.
19. Shin, W. G., Pui, D. Y. H., Fissan, H., Neumann, S., and Trampe, A. (2007). Calibration and numerical simulation of the nanoparticle surface area monitor (TSI Model 3550 NSAM). J. Nanoparticle Res., 9, pp. 61-69.
20. Deppert, K., Dixkens, J., Fissan, H., Schmidt, F., and Krinke, T. (1996). Electrostatic precipitator for homogeneous deposition of ultrafine particles to create quantum-dot structures, J. Aerosol Sci., 27, pp. 151-152.
21. Azong-Wara, N., Asbach C., Stahlmecke B., Fissan, H., Kaminski, H., Plitzko, S., and Kuhlbusch, T. K. J. (2009). Optimisation of a thermophoretic personal sampler for nanoparticle exposure studies. J. Nanoparticle Res., 11, pp. 1611-1624.
22. VDI (2008). Guideline 3867: Measurement of particulate matter in ambient air: Methods for characterizing test aerosols-Determination of the particle number concentration and particle size distribution. Part 2: Condensation Particle Counter (CPC).
23. Jung, H., and Kittelson D. B. (2005). Characterization of aerosol surface instruments in transition regime. Aerosol Sci. Technol., 39, pp. 902-911.
24. Li, L., Chen, D.-R., and Tsai, P.-J. (2009). Evaluation of an electrical aerosol detector (EAD) for the aerosol integral parameter measurement. J. Electrostatics, pp. 765-773.
25. Burtscher, H., and Schmidt-Ott, A. (2004). Method and Device for Measurement of the Number Concentration and Mean Diameter of Particles Suspended in a Carrier Gas, European Patent EP 1655595, filed 3.11.2004, granted 2009.
26. Fierz, M., Houle, C., Steigmeier, P., and Burtscher, H. (2010). Design, calibration and field performance of a miniature diffusion size classifier. Aerosol Sci. Technol., 45, pp. 1-10.
27. ISO (2009). ISO 15900: Determination of particle size distributions-Differential electrical mobility analysis for aerosol particles.
28. Wang, J., Shin, W. G., Mertler, M., Sachweh, B., Fissan, H., and Pui, D. Y. H. (2010). Measurement of nanoparticle agglomerates by combined measurement of electrical mobility and unipolar charging properties. Aerosol Sci. Technol., 44, pp. 97-108.
29. Ehara, K., Hagwood, R. C., and Coakley, K. J (1996). Novel method to classify aerosol particles according to their mass-to-charge ratio. J. Aerosol Sci., 27, pp. 217-234.
30. Maynard, A. D., Ku, B. K, Emery, M., Stolzenburg, M., and McMurry, P. H. (2006). Measuring particle size-dependent physiochemical structure in airborne single walled carbon nanotubes agglomerates. J. Nanoparticle Res., 9, pp. 85-92.
31. Hinds, W.C. (1999). Aerosol Technology. 2nd ed. (John Wiley and Sons, New York, USA).
32. Cheng, Y.S., and Yeh, H.C. (1983). Performance of a screen-type diffusion battery. In Aerosols in the Mining and Industrial Work Environments (V.A. Marple, B.Y.H. Liu, ed.), Ann Arbor Science Publishers, Ann Arbor, Michigan, pp. 1077-1094.
33. Fierz, M., Weimer, S., and Burtscher, H. (2008). Design and performance of an optimized electrical diffusion battery. J. Aerosol Sci., 40, pp. 152-163.
34. Keskinen J., Pietarinen, K., and Lehtimäki, M. (1992). Electrical low pressure impactor. J. Aerosol Sci., 23, pp. 353-360.
35. Jayne, J. T., Leard, D. C., Zhang, X., Davidovits, P., Smith, K. A., Kolb, C. E., and Worsnop, D. R. (2000). Development of an aerosol mass spectrometer for size and composition analysis of submicron particles. Aerosol Sci. Technol., 34, pp 33-49.
36. Wood, S. H., Prather, K. A. (1998). Time-of-flight mass spectrometry methods for real time analysis of individual aerosol particles. Trends Anal. Chem., 17, pp. 346-356.
37. Wang, X., and McMurry, P. H., (2006). A Design Tool for Aerodynamic Lens Systems, Aerosol Sci. Technol., 40, pp. 320-334.
38. Drewnick, F., Hings, S. S., DeCarlo, P., Jayne, J. T., Gonin, M., Fuhrer, K., Weimer, S., Jimenez, J. L., Demerjia, K. L., Borrmann, S., and Worsnop, D. R. (2005). A new time-of-flight aerosol mass spectrometer (TOFAMS)-instrument description and first field deployment, Aerosol Sci. Technol., 39, pp. 637-658.
39. Fissan, H., Kaminski, H., Asbach, C., Pui, D. and Wang, J. (2013). Rationale for data evaluation for size distribution measurements of agglomerates and aggregates in gases with extended SMPS-technology. J. Aerosol and Air Quality Research, submitted.
40. Fissan, H., Asbach, C., Kaminski, H., and Kuhlbusch, T. K. Y. (2012). Total surface area concentration measurements of nanoparticles in gases with an electrical sensor. Chemische Ingenieur Technik (CIT) 84(3), pp. 365-372.
41. ISO (2010). ISO/DIS 13138: Air quality-Sampling conventions for airborne particle deposition in the human respiratory system.
42. Kuhlbusch, T. A. J., Neumann, S., and Fissan, H. (2004). Number size distribution, mass concentration and particle composition of PM1, PM2.5, PM10 in bag filling areas of carbon black production. J. Occup. Environ. Hyg., 1, pp. 660-671.
43. Kuhlbusch, T. A. J., Fissan, H. (2006). Particle characteristics in the reactor and pelletizing area of carbon black production. J. Occup. Environ. Hyg., 3, pp. 558-567.
44. Maynard, A. D., Baron, P. A., Foley, M., Shvedova, A. A., Kisin, E. R., and Castranova, V. (2004). Exposure to carbon nanotube material: Aerosol release during the handling of unrefined single walled carbon nanotube material. J. Toxic Environ. Health, 67, pp. 87-107.
45. ISO (2007). ISO/TR 27628: Workplace atmospheres-Ultrafine, nanoparticle and nanostructured aerosols-Inhalation exposure characterization and Assessment.
46. BAuA, BGRCI, IFA, IUTA and VCI (2011). Consent Report: Tiered approach to an exposure measurement and assessment of nanoscale aerosols released from engineered nanomaterials in workplace operations.
47. Methner, M., Hodson, L., Dames, A., and Geraci, C. (2010). Nanoparticle emission assessment technique (NEAT) part B, J. Occup. Environ. Hyg., 7, pp. 163-176.
48. Maynard, A. D., and Aitken, R. J. (2007). Assessing exposure to airborne nanomaterials: Current abilities and future requirements. Nanotoxicology, 1, pp. 26-41.
49. Kuhlbusch, T. A. J., Fissan, H., and Asbach, C. (2008). Measurement and detection of nanoparticles within the environment. In Nanotechnology, Volume 2: Environmental Aspects (H. Krug, ed), Wiley-VCH, Weinheim, Germany, pp. 229-266.