Effects of fuel properties on combustion and emissions under both conventional and low temperature combustion mode fueling 2,5-dimethylfuran/diesel blends

Energy

Volumn 62, Issue , 2013, Pages 215-223

  Liu, Haifeng ^a   Xu, Jia ^a   Zheng, Zunqing ^a   Li, Shanju ^a   Yao, Mingfa ^a  

^a TIANJIN UNIVERSITY   (China)

Author keywords

Diesel engines; DMF (2,5 dimethylfuran); Fuel properties; Low temperature combustion; Soot

Indexed keywords

BLENDING; CARBON MONOXIDE; DIESEL ENGINES; DIESEL FUELS; FUELS; HEPTANE; MIXTURES; OXYGEN; POLYOLS; SOOT; TEMPERATURE;

2-ETHYLHEXYL NITRATE; CONTROL COMBUSTION PROCESS; DMF (2,5-DIMETHYLFURAN); FUEL PROPERTIES; LOW TEMPERATURE COMBUSTION; PHYSICAL AND CHEMICAL PROPERTIES; PREMIXED COMBUSTION; TOTAL HYDROCARBONS;

COMBUSTION;

CARBON MONOXIDE; COMBUSTION; DIESEL ENGINE; EMISSION INVENTORY; HYDROCARBON; LOW TEMPERATURE; OXYGEN; SOOT;

EID: 84886631198     PISSN: 03605442     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.energy.2013.09.057     Document Type: Article

References (50)

1. Yilmaz N. Comparative analysis of biodiesel-ethanol-diesel and biodiesel-methanol-diesel blends in a diesel engine. Energy 2012, 40(1):210-213.
2. Qi D.H., Chen H., Geng L.M., Bian Y.Z., Ren C.X. Performance and combustion characteristics of biodiesel-diesel-methanol blend fuelled engine. Appl Energy 2010, 87:1679-1686.
3. Kannan G.R., Anand R. Experimental investigation on diesel engine with diestrol-water micro emulsions. Energy 2011, 36(3):1680-1687.
4. Hansen A.C., Zhang Q., Lyne P.W.L. Ethanol-diesel fuel blends - a review. Bioresour Technol 2005, 96:277-285.
5. Hansen A.C., Gratton M.R., Yuan W. Diesel engine performance and NOx emissions from oxygenated biofuels and blends with diesel fuel. Trans ASABE 2006, 49:589-595.
6. Yoon S.H., Park S.H., Suh H.K., Lee C.S. Effect of biodiesel-ethanol blended fuel spray characteristics on the reduction of exhaust emissions in a common-rail diesel engine. JEnergy Resour Technol-Trans ASME 2010, 132:042201-1-042201-7.
7. Park S.H., Suh H.K., Lee C.S. Effect of bioethanol-biodiesel blending ratio on fuel spray behavior and atomization characteristics. Energy Fuels 2009, 23:4092-4098.
8. Zhang Q.C., Yao M.F., Zheng Z.Q., Liu H.F., Xu J. Experimental study of n-butanol addition on performance and emissions with diesel low temperature combustion. Energy 2012, 47(1):515-521.
9. Liu H.F., Lee C.F., Huo M., Yao M.F. Combustion characteristics and soot distributions of neat butanol and neat soybean biodiesel. Energy Fuels 2011, 25(7):3192-3203.
10. Liu H.F., Lee C.F., Huo M., Yao M.F. Comparison of ethanol and butanol as additives in soybean biodiesel using a constant volume combustion chamber. Energy Fuels 2011, 25(4):1837-1846.
11. Sukjit E., Herreros J.M., Dearn K.D., Garcia-Contreras R., Tsolakis A. The effect of the addition of individual methyl esters on the combustion and emissions of ethanol and butanol-diesel blends. Energy 2012, 42(1):364-374.
12. Qi D.H., Geng L.M., Chen H., Bian Y.Z., Liu J., Ren C.X. Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil. Renew Energy 2009, 34:2706-2713.
13. Qi D.H., Chen H., Matthews R.D., Bian Y.Z. Combustion and emission characteristics of ethanol-biodiesel-water micro-emulsions used in a direct injection compression ignition engine. Fuel 2010, 89:958-964.
14. Tan P.Q., Hu Z.Y., Lou D.M., Li Z.J. Exhaust emissions from a light-duty diesel engine with Jatropha biodiesel fuel. Energy 2012, 39:356-362.
15. Bueno A.V., Velásquez J.A., Milanez L.F. Heat release and engine performance effects of soybean oil ethyl ester blending into diesel fuel. Energy 2011, 36:3907-3916.
16. Roman-Leshkov Y., Barrett C.J., Liu Z.Y., Dumesic J.A. Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates. Nature 2007, 447:982-986.
17. Zhao H., Holladay J.E., Brown H., Zhang Z.C. Metal chlorides in ionic liquid solvents convert sugars to 5-hydroxymethylfurfural. Science 2007, 316:1597-1600.
18. Mascal M., Nikitin E.B. Direct, high-yield conversion of cellulose into biofuel. Angew Chem 2008, 120:8042-8044.
19. Wu X.S., Huang Z.H., Yuan T., Zhang K., Wei L.X. Identification of combustion intermediates in a low-pressure premixed laminar 2,5-dimethylfuran-oxygenargon flame with tunable synchrotron photoionization. Combust Flame 2009, 156:1365-1376.
20. Wu X.S., Huang Z.H., Yuan T., Jin C., Wang X., Zheng B., et al. Measurements of laminar burning velocities and markstein lengths of 2,5-dimethylfuran-airdiluent premixed flames. Energy Fuels 2009, 23:4355-4362.
21. Wu X.S., Li Q.Q., Fu J., Tang C.L., Huang Z.H., Daniel R., et al. Laminar burning characteristics of 2,5-dimethylfuran and iso-octane blend at elevated temperatures and pressures. Fuel 2012, 95(1):234-240.
22. Zhong S.H., Daniel R., Xu H.M., Zhang J., Turner D. Combustion and emissions of 2,5-dimethylfuran in a direct-injection spark-ignition engine. Energy Fuels 2010, 24:2891-2899.
23. Daniel R., Tian G., Xu H.M., Wyszynski M.L., Wu X.S. Effects of spark timing and load on a DISI engine fuelled with 2,5-dimethylfuran. Fuel 2011, 90:449-458.
24. Daniel R., Xu H.M., Wang C.M., Richardson D., Shuai S.J. Combustion performance of 2,5-dimethylfuran blends using dual-injection compared to direct-injection in a SI engine. Appl Energy 2012, 98:59-68.
25. Zhang Q.C., Chen G.S., Zheng Z.Q., Liu H.F., Xu J., Yao M.F. Combustion and emissions of 2,5-dimethylfuran addition on a diesel engine with low temperature combustion. Fuel 2013, 103:730-735.
26. Chen G.S., Shen Y.G., Zhang Q.C., Yao M.F., Zheng Z.Q., Liu H.F. Experimental study on combustion and emission characteristics of a diesel engine fueled with 2,5-dimethylfuran-diesel, n-butanol-diesel and gasoline-diesel blends. Energy 2013, 54:333-342.
27. Zhang Q.C., Yao M.F., Luo J., Chen H., Zhang X.Y. Diesel engine combustion and emissions of 2,5-dimethylfuran-diesel blends with 2-ethylhexyl nitrate addition. Fuel 2013, 10.1016/j.fuel.2013.04.009.
28. Donkerbroek A.J., Boot M.D., Luijten C.C.M., Dam N.J., ter Meulen J.J. Flame lift-off length and soot production of oxygenated fuels in relation with ignition delay in a DI heavy-duty diesel engine. Combust Flame 2011, 158:525-538.
29. Boot M.D., Frijters P.J.M., Luijten C.C.M., Somers L.M.T., Baert R.S.G., Donkerbroek A.J., et al. Cyclic oxygenates: a new class of second-generation biofuels for diesel engines?. Energy Fuels 2009, 23:1808-1817.
30. Song K.H., Litzinger T.A. Effects of dimethoxymethane blending into diesel fuel on soot in an optically assessable DI diesel engine. Combust Sci Technol 2006, 178:2249-2280.
31. Liu H.F., Bi X.J., Huo M., Lee C.F., Yao M.F. Soot emissions of various oxygenated biofuels in conventional diesel combustion and low temperature combustion conditions. Energy Fuels 2012, 26:1900-1911.
32. Park S.H., Suh H.K., Lee C.S. Nozzle flow and atomization characteristics of ethanol blended biodiesel fuel. Renew Energy 2010, 35:144-150.
33. Pepiot-Desjardins P., Pitsch H., Malhotra R., Kirby S.R., Boehman A.L. Structural group analysis for soot reduction tendency of oxygenated fuels. Combust Flame 2008, 154:191-205.
34. Kimura S, Aoki O, Ogawa H, Muranaka S. New combustion concept for ultraclean and high-efficiency small DI diesel engines. SAE Paper 1999-01-3681.
35. Han D., Ickes A.M., Bohac S.V., Huang Z., Assanis D.N. Premixed low-temperature combustion of blends of diesel and gasoline in a high speed compression ignition engine. Proc Combust Ins 2011, 33:3039-3046.
36. Han D., Ickes A.M., Assanis D.N., Huang Z., Bohac S.V. Attainment and load extension of high-efficiency premixed low-temperature combustion with dieseline in a compression ignition engine. Energy Fuels 2010, 24:3517-3525.
37. Zheng M., Asad U., Reader G.T., Tan Y.Y., Wang M.P. Energy efficiency improvement strategies for a diesel engine in low-temperature combustion. Int J Energy Res 2009, 33(1):8-28.
38. Asad U., Zheng M. Tightened intake oxygen control for improving diesel low-temperature combustion. Proc Inst Mech Eng Pt D-J Automobile Eng 2011, 225(D4):513-530.
39. Asad U, Zheng M. Evaluation of diesel low temperature combustion fuel-injection strategies at different engine load. Proceedings of the ASME Internal Combustion Engine Division Fall Technical Conference 2010; 479-489.
40. Yao MF, Zhang QC, Liu HF, Zheng ZQ, Zhang P. Diesel engine combustion control: medium or heavy EGR? SAE Paper 2010-01-1125.
41. Liu H.F., Yao M.F., Zhang B., Zheng Z.Q. Influence of fuel and operating conditions on combustion characteristics of a homogeneous charge compression ignition engine. Energy Fuels 2009, 23:1422-1430.
42. Liu H.F., Yao M.F., Zhang B., Zheng Z.Q. Effects of inlet pressure and octane numbers on combustion and emissions of a homogeneous charge compression ignition (HCCI) engine. Energy Fuels 2008, 22:2207-2215.
43. Mueller CJ, Martin GC. Effects of oxygenated compounds on combustion and soot evolution in a DI diesel engine: Broadband natural luminosity imaging. SAE Paper 2002-01-1631.
44. Song J.H., Zello V., Boehman A.L. Comparison of the impact of intake oxygen enrichment and fuel oxygenation on diesel combustion and emissions. Energy Fuels 2004, 18:1282-1290.
45. Figliola R.S., Beasley D.E. Theory and design for mechanical measurements 2000, John Wiley & Sons, New York, USA.
46. Heywood J.B. Internal combustion engine fundamentals 1988, 541. McGraw-Hill Book Company, New York.
47. Akihama K, Takatori Y, Inagaki K, etal. Mechanism of the smokeless rich diesel combustion by reducing temperature. SAE Paper 2001-01-0655.
48. Mancaruso E., Vaglieco B.M. An experimental comparison of n-Heptane, RME and diesel fuel on combustion characteristics in a compression ignition engine. Fuel Process Technol 2013, 107:44-49.
49. Liu H.F., Li S.J., Zheng Z.Q., Xu J., Yao M.F. Effects of n-butanol, 2-butanol, and methyl octynoate addition to diesel fuel on combustion and emissions over a wide range of exhaust gas recirculation (EGR) rates. Appl Energy 2013, 112:246-256.
50. Hiskey M.A., Brower K.R., Oxley J.C. Thermal decomposition of nitrate esters. JPhys Chem 1991, 95:3955-3960.