Mechanical testing of implant-supported anterior crowns with different implant/abutment connections

International Journal of Oral and Maxillofacial Implants

Volumn 28, Issue 1, 2013, Pages 103-108

  Almeida, Erika O ^a   Freitas, Amilcar C ^a   Bonfante, Estevam A ^b   Marotta, Leonard ^a   Silva, Nelson R F A ^c   Coelho, Paulo G ^a  

^a NEW YORK UNIVERSITY COLLEGE OF DENTISTRY   (United States)

^b Inst Ciencias Exatas e da Natureza   (Brazil)

^c FEDERAL UNIVERSITY OF MINAS GERAIS   (Brazil)

Author keywords

Cementation, dental implants; Fractography; Implant supported prostheses; Reliability; Step stress accelerated life testing

Indexed keywords

TITANIUM; WATER;

CONFIDENCE INTERVAL; DENTAL ABUTMENT; DENTAL PROCEDURE; DENTAL SURGERY; DEVICES; HUMAN; INCISOR; MECHANICAL STRESS; PROCEDURES; REPRODUCIBILITY; TOOTH CROWN; TOOTH IMPLANT; ARTICLE; EQUIPMENT; METHODOLOGY;

CONFIDENCE INTERVALS; CROWNS; DENTAL IMPLANT-ABUTMENT DESIGN; DENTAL IMPLANTS, SINGLE-TOOTH; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; HUMANS; INCISOR; POST AND CORE TECHNIQUE; REPRODUCIBILITY OF RESULTS; STRESS, MECHANICAL; TITANIUM; WATER;

EID: 84886373412     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: 10.11607/jomi.2443     Document Type: Article

References (42)

1. Pjetursson BE, Lang NP. Prosthetic treatment planning on the basis of scientific evidence. J Oral Rehabil 2008; 35(suppl 1):72-79.
2. Albrektsson T. A multicenter report on osseointegrated oral implants. J Prosthet Dent 1988; 60: 75-84.
3. Balshi TJ, Hernandez RE, Pryszlak MC, Rangert B. A comparative study of one implant versus two replacing a single molar. Int J Oral Maxillofac Implants 1996; 11: 372-378.
4. Eckert SE, Wollan PC. Retrospective review of 1170 endosseous implants placed in partially edentulous jaws. J Prosthet Dent 1998; 79: 415-421.
5. Steinebrunner L, Wolfart S, Ludwig K, Kern M. Implant-abutment interface design affects fatigue and fracture strength of implants. Clin Oral Implants Res 2008; 19: 1276-1284.
6. Goodacre CJ, Kan JY, Rungcharassaeng K. Clinical complications of osseointegrated implants. J Prosthet Dent 1999; 81: 537-552.
7. Rangert B, Krogh PH, Langer B, Van Roekel N. Bending overload and implant fracture: A retrospective clinical analysis. Int J Oral Maxillofac Implants 1995; 10: 326-334.
8. Cardoso Lde C, Luvizuto ER, Trevisan CL, Garcia IR Jr, Panzarini SR, Poi WR. Resolution of a titanium implant fracture after a recurrent trauma. Dent Traumatol 2010; 26: 512-515.
9. Akca K, Cehreli MC, Iplikcioglu H. Evaluation of the mechanical characteristics of the implant-abutment complex of a reduced-diameter Morse-taper implant. A nonlinear finite element stress analysis. Clin Oral Implants Res 2003; 14: 444-454.
10. Pessoa RS, Muraru L, Marcantonio E Jr, et al. Influence of implant connection type on the biomechanical environment of immediately placed implants: CT-based nonlinear, three-dimensional finite element analysis. Clin Implant Dent Relat Res 2010; 12: 219-234.
11. Binon PP. Implants and components: Entering the new millennium. Int J Oral Maxillofac Implants 2000; 15: 76-94.
12. Finger IM, Castellon P, Block M, Elian N. The evolution of external and internal implant/abutment connections. Pract Proced Aesthet Dent 2003; 15: 625-632.
13. Jemt T, Laney WR, Harris D, et al. Osseointegrated implants for single tooth replacement: A 1-year report from a multicenter prospective study. Int J Oral Maxillofac Implants 1991; 6: 29-36.
14. Morgan MJ, James DF, Pilliar RM. Fractures of the fixture component of an osseointegrated implant. Int J Oral Maxillofac Implants 1993; 8: 409-414.
15. Belser UC, Mericske-Stern R, Bernard JP, Taylor TD. Prosthetic management of the partially dentate patient with fixed implant restorations. Clin Oral Implants Res 2000; 11(suppl 1):126-145.
16. Levine RA, Clem DS III, Wilson TG Jr, Higginbottom F, Solnit G. Multicenter retrospective analysis of the ITI implant system used for single-tooth replacements: Results of loading for 2 or more years. Int J Oral Maxillofac Implants 1999; 14: 516-520.
17. McGlumphy EA, Mendel DA, Holloway JA. Implant screw mechanics. Dent Clin North Am 1998; 42: 71-89.
18. Merz BR, Hunenbart S, Belser UC. Mechanics of the implantabutment connection: An 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000; 15: 519-526.
19. Haack JE, Sakaguchi RL, Sun T, Coffey JP. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 1995; 10: 529-536.
20. Alkan I, Sertgoz A, Ekici B. Influence of occlusal forces on stress distribution in preloaded dental implant screws. J Prosthet Dent 2004; 91: 319-325.
21. Hecker DM, Eckert SE. Cyclic loading of implant-supported prostheses: Changes in component fit over time. J Prosthet Dent 2003; 89: 346-351.
22. Broggini N, McManus LM, Hermann JS, et al. Peri-implant inflammation defined by the implant-abutment interface. J Dent Res 2006; 85: 473-478.
23. Khraisat A, Stegaroiu R, Nomura S, Miyakawa O. Fatigue resistance of two implant/abutment joint designs. J Prosthet Dent 2002; 88: 604-610.
24. Hellsing G. On the regulation of interincisor bite force in man. J Oral Rehabil 1980; 7: 403-411.
25. Reliasoft. The Weibull Distribution and Beta. Tucson: Reliasoft, 2010.
26. Manda MG, Psyllaki PP, Tsipas DN, Koidis PT. Observations on an invivo failure of a titanium dental implant/abutment screw system: A case report. J Biomed Mater Res B Appl Biomater 2009; 89: 264-273.
27. Nelson W. Accelerated Testing: Statistical Models, Test Plans and Data Analysis. New York: John Wiley & Sons, 1990.
28. Coelho PG, Silva NR, Bonfante EA, Guess PC, Rekow ED, Thompson VP. Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent Mater 2009; 25: 1122-1127.
29. Silva NR, Coelho PG, Fernandes CA, Navarro JM, Dias RA, Thompson VP. Reliability of one-piece ceramic implant. J Biomed Mater Res B Appl Biomater 2009; 88: 419-426.
30. Zhao WE, Elsayed E. A general accelerated life model for step-stress testing. IEEE Trans Reliabil 2005; 37: 1059-1069.
31. Silva NR, Bonfante EA, Zavanelli RA, Thompson VP, Ferencz JL, Coelho PG. Reliability of metalloceramic and zirconia-based ceramic crowns. J Dent Res 2010; 89: 1051-1056.
32. Coelho PG, Bonfante EA, Silva NR, Rekow ED, Thompson VP. Laboratory simulation of Y-TZP all-ceramic crown clinical failures. J Dent Res 2009; 88: 382-386.
33. Bonfante EA, Coelho PG, Navarro JM Jr, et al. Reliability and failure modes of implant-supported Y-TZP and MCR three-unit bridges. Clin Implant Dent Relat Res 2010; 12: 235-243.
34. Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: Comparison of failure modes and reliability after fatigue. Int J Prosthodont 2010; 23: 434-442.
35. Freitas AC Jr, Bonfante EA, Rocha EP, Silva NR, Marotta L, Coelho PG. Effect of implant connection and restoration design (screwed vs. cemented) in reliability and failure modes of anterior crowns. Eur J Oral Sci 2011; 119: 323-330.
36. Freitas AC Jr, Bonfante EA, Silva NR, Marotta L, Coelho PG. Effect of implant-abutment connection design on reliability of crowns:Regular vs. horizontal mismatched platform. Clin Oral Implants Res 2012; 23: 1123-1126.
37. Freitas AC Jr, Bonfante EA, Martins LM, Silva NR, Marotta L, Coelho PG. Effect of implant diameter on reliability and failure modes of molar crowns. Int J Prosthodont 2011; 24: 557-561.
38. Martins LM, Bonfante EA, Zavanelli RA, et al. Fatigue reliability of 3 single-unit implant-abutment designs. Implant Dent 2012; 21: 67-71.
39. Jung RE, Pjetursson BE, Glauser R, Zembic A, Zwahlen M, Lang NP. A systematic review of the 5-year survival and complication rates of implant-supported single crowns. Clin Oral Implants Res 2008; 19: 119-130.
40. Mangano C, Mangano F, Shibli JA, et al. Prospective evaluation of 2,549 Morse taper connection implants: 1- to 6-year data. J Periodontol 2011; 82: 52-61.
41. de Jesus Tavarez RR, Bonachela WC, Xible AA. Effect of cyclic load on vertical misfit of prefabricated and cast implant single abutment. J Appl Oral Sci 2011; 19: 16-21.
42. Parrington RJ. Fractography of Metals and Plastics. Practical Failure Analysis. Materials Park: ASM International, 2002:16-46.