Syngas: The Basis of Fischer-Tropsch

Greener Fischer-Tropsch Processes for Fuels and Feedstocks

Volumn , Issue , 2013, Pages 17-51

  Zennaro, Roberto ^a   Ricci, Marco ^b   Bua, Letizia ^b   Querci, Cecilia ^b   Carnelli, Lino ^b   D'Arminio Monforte, Alessandra ^b  

^a ENI S P A   (Italy)

^b Istituto Guido Donegani SpA   (Italy)

Author keywords

Autothermal reforming; Fixed bed gasifier; Noncatalytic partial oxidation; Syngas; Tail gas; Water gas shift reaction

Indexed keywords

EID: 84886338038     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527656837.ch2     Document Type: Chapter

References (48)

1. Paggini, A., Sanfilippo, D., Pecci, G., and Dybkjaer, I. (1986) Implementation of the methanol plus higher alcohols process by Snamprogetti, Enichem, H.Topsoe A/S "MAS Technology". Proceedings of the VII Symposium on Alcohols Fuels, October 20-23, Paris, Editions Technip, pp. 62-67.
2. Fattore, V., Notari, B., Paggini, A., and Laganä, V. (1985) Catalytic system for producing mixture of methanol and higher alcohols. US Patent 4,513,100, filed October 28, 1982 and issued April 23, 1985.
3. Tijmensen, M.J.A., Faaij, A.P.C., Hamelinck, C.N., and van Hardeveld, M. R.M. (2002) Biomass Bioenergy, 23, 129-152.
4. Iandoli, C.L. and Kielstrup, S. (2007) Energy Fuels, 21, 2317-2324.
5. Bakkerund, P.K., Gol, J.N., Aasberg- Petersen, K., and Dybkjaer, I. (2004) Stud. Surf. Sci. Catal., 147, 13-18.
6. Basini, L., Aasberg-Petersen, K., Guarinoni, A., and Østberg, M. (2001) Catal. Today, 64 (1-2), 9-20.
7. Wilhelm, D.J., Simbeck, D.R., Karp, A.D., and Dickenson, R.L. (2001) Fuel Process. Technol., 71, 139-148.
8. Prins, M.J., Ptasinski, K.J., and Janssen, F.J.J.G. (2007) Energy, 32, 1248-1259.
9. McKendry, P. (2002) Bioresour. Technol., 83, 55-63.
10. Olofsson, I., Nordin, A., and Soderlind, U. (2005) Initial Review and Evaluation of Process Technologies and Systems Suitable for Cost-Efficient Medium-Scale Gasification for Biomass to Liquid Fuels. Report 05-02, ISSN 1653-0551 ETPC Report.
11. Higman, C. and van der Burgt, M. (eds) (2008) Gasification, Elsevier.
12. International Energy Agency (2007) Fossil fuel-fired power generation: case studies of recently constructed coal- and gas-fired power plants.
13. Ratnasamy, C. and Wagner, J.P. (2009) Catal. Rev., 51, 325-440.
14. Graaf, G.H., Sijtsema, P.J.J.M., Stamhuis, E.J., and Joosten, G.E.H. (1996) Chem. Eng. Sci., 41, 2883.
15. van der Laan, G.P. and Beenackers, A.A.C. M. (1999) Catal. Rev. Sci. Eng., 41, 255.
16. Zhang, R.Q., Cummer, K., Suby, A., and Brown, R.C. (2005) Fuel Process. Technol., 86, 861.
17. National Energy Technology Laboratory (2007) Industrial size gasification for syngas, substitute natural gas and power production. DOE/NETL 401/040607.
18. Echt, W.I. (1997) Chemical solvent-based processes for acid gas removal in gasification application. Presented at the IchemE Conference on Gasification Technology in Practice, February 1997, Milan, Italy.
19. Ranke, G. (1972) Chem. Econ. Eng. Rev., 4, 25-31.
20. Hassan, K.H. (2010) Eur. J. Sci. Res., 39, 289.
21. Boerrigter, H., Den Uil, H., and Clis, H. (2002) Green diesel from biomass via Fischer-Tropsch synthesis: new insights in gas cleaning and process data. Presented at the Expert Meeting on Pyrolysis and Gasification of Biomass and Waste, September 30-October 1, 2002, Strasbourg, France.
22. Rankin, J. (1982) Investigation of sulfurtolerant catalysts for selective synthesis of hydrocarbon liquids from coal-derived gases. Proceedings of the DOE Contractors Conference on Indirect Liquefaction, September 8-9, 1982, Pittsburgh, PA.
23. Visconti, C.G., Lietti, L., Forzatti, P., and Zennaro, R. (2007) Appl. Catal. A: General, 330, 49.
24. Visconti, C.G., Lietti, L., Forzatti, P., Zennaro, R., and Rossini, S. (2010) Catal. Today, 154, 202-209.
25. Dry, M.E. (2004) (eds J.R. Anderson and M. Boudart), Catalysis Science and Technology, vol. 1, Springer, New York.
26. Rowley, R.L., Wilding, W.V., Oscarson, J.L., Yang, Y., Daubert, T.E., and Danner, R.P. (2006) DIPPR1 Data Compilation of Pure Chemical Properties, Design Institute for Physical Properties, AIChE, New York, NY.
27. Bodke, A.S., Bharadwaj, S.S., and Schmidt, L.D. (1998) J. Catal., 179 (1), 138-149.
28. Aasberg-Petersen, K., Christensen, T.S., Nielsen, C.S., and Dybkjaer, I. (2003) Fuel Process. Technol., 83, 253-261.
29. Aasberg-Petersen, K., Bak Hansen, J.H., Christensen, T.S., Dybkjaer, I., Seier Christensen, P., Stub Nielsen, C., Winter Madsen, S.E.L., and Rostrup-Nielsen, J.R. (2001) Appl. Catal. A: General, 221 (1-2), 379-387.
30. van Vliet, O.P.R., Faaij, A.P.C., and Turkenburg, W.C. (2009) Energy Convers. Manage., 50 (4), 855-876.
31. Molina, A. and Mondragön, F. (1998) Fuel, 77 (15), 1831-1839.
32. Ge-wen, Yu, Yuan-yuan, Xu, Xu, Hao, Yong-wang, Li, and Guang-qi, Liu, (2010) Fuel, 89 (5), 1070-1076.
33. Hofmockel, J., Liebner, W., and Ulber, D., Lurgi's multi purpose gasification (mpg) application and further development. Proceedings of the IChemE Conference, Gasification for the Future, 4 April 2000, Noordwijk, The Netherlands.
34. Buragohain, B., Mahanta, P., and Moholkar, V.S. (2010) Energy, 35, 2557- 2579.
35. Dry, M.E. (2004) Chemical concepts used for engineering purposes, in Fischer Tropsch Technology (eds A. Steynberg and M. Dry), Studies in Surface Science and Catalysis, Elsevier, Amsterdam, pp. 196-257.
36. Dry, M.E. (1982) Chem. Technol., 744-750.
37. Dry, M.E. and Steynberg, A. (2004) Commercial FTprocess application, in Fischer Tropsch Technology (eds A. Steynberg and M. Dry), Studies in Surface Science and Catalysis, Elsevier, Amsterdam, pp. 406-481.
38. Dry, M.E. (1980) Hydrocarb. Process., 59 (2), 92-94.
39. Perego, C., Bortolo, R., and Zennaro, R. (2007) Catal. Today, 142, 9-16.
40. Winter-Madsen, S. and Olsson, H. (2007) Hydrocarb. Process., 12 (7), 37-40.
41. Maitlis, P.M. and Zanotti, V. (2009) Chem. Commun., 1619-1634.
42. Krishnamoorthy, S., Li, A., and Iglesia, E. (2002) Catal. Lett., 80, 77.
43. Riedel, T., Clayes, M., Schulz, H., Schaub, G., Nam, S.S., Jun, K.W., Choi, M.J., Kishan, G., and Lee, K.W. (1999) Appl. Catal. A, 186, 201.
44. Visconti, C.G., Lietti, L., Tronconi, E., Forzatti, P., Zennaro, R., and Finocchio, E. (2009) Appl. Catal. A, 355 (1-2), 61-68
45. Zhang, Y., Jacobs, G., Sparks, D.E., Dry, M.E., and Davis, B.H. (2002) Catal. Today, 71, 411.
46. Hall,W.K., Kokes, R.J., and Emmett, P.H. (1957) J. Am. Chem. Soc., 79, 2983.
47. Proskurowski, G., Lilley, M.D., Seewald, J.S., Früh-Green, G.L., Olson, E.J., Lupton, J.E., Sylva, S.P., and Kelley, D.S. (2008) Science, 319, 604.
48. Rohde, M.P., Unruh, D., and Schaub, G. (2005) Ind. Eng. Chem. Res., 44, 9653.