The influence of paper coating content on room temperature sintering of silver nanoparticle ink

Nanotechnology

Volumn 24, Issue 45, 2013, Pages

  Andersson, H ^a   Manuilskiy, A ^a   Lidenmark, C ^a   Gao, J ^a   Ohlund T ^b   Forsberg, S ^a   Ortegren J ^b   Schmidt, W ^c   Nilsson, H E ^a  

^a MID SWEDEN UNIVERSITY   (Sweden)

^b Digital Printing Center   (Sweden)

^c Burg Gretesch   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

HIGH RESISTIVITY; HIGH SOLUBILITY; PRINTED STRUCTURES; ROOM TEMPERATURE; SENSOR APPLICATIONS; SILICA-BASED COATINGS; SILVER NANOPARTICLES; SILVER NITRATES;

CHLORINE COMPOUNDS; COATINGS; METAL IONS; NANOPARTICLES; PAPER; PRECIPITATION (CHEMICAL); SALTS; SENSORS; SILICA; SILVER; SINTERING; SUBSTRATES;

INK;

CHLORINE COMPOUNDS; COATINGS; INK; INORGANIC SALTS; PAPER; PRECIPITATION; SENSORS; SILICA; SILVER; SINTERING; SUBSTRATES;

EID: 84886301058     PISSN: 09574484     EISSN: 13616528     Source Type: Journal    
DOI: 10.1088/0957-4484/24/45/455203     Document Type: Article

References (39)

1. Subramanian V, Frechet J M J, Chang P C, Huang D C, Lee J B, Molesa S E, Murphy A R, Redinger D R and Volkman S K 2005 Progress toward development of all-printed RFID tags: materials, processes, and devices Proc. IEEE 93 1330-8 (Pubitemid 41084578)
2. Subramanian V, Chang P C, Lee J B, Molesa S E and Volkman S K 2005 Printed organic transistors for ultra-low-cost RFID applications IEEE Trans. Compon. Packag. Technol. 28 742-7 (Pubitemid 41825214)
3. Allen M L, Jaakkola K, Nummila K and Seppa H 2009 Applicability of metallic nanoparticle inks in RFID applications IEEE Trans. Compon. Packag. Technol. 32 325-32
4. Virtanen J, Björninen T, Ukkonen L, Kaija K, Joutsenoja T, Sydänheimo L and Elsherbeni A Z 2010 The effect of conductor thickness in passive inkjet printed RFID tags Proc. Antennas and Propagation Society Int. Symp. (Toronto,) pp 1-4
5. Sidén J and Nilsson H-E 2007 Line width limitations of flexographic screen and inkjet printed RFID antennas Proc. IEEE Antennas Propag. Soc. Int. Symp. (Hawaii,) pp 1745-8
6. Noh J, Yeom D, Lim C, Cha H, Han J, Kim J, Park Y and Subramanian V 2010 Scalability of roll-to-roll gravure printed electrodes on plastic foils IEEE Trans. Electron. Packag. Manuf. 33 275-83
7. Arenas O J, de la Jarrige E L and Boone F 2010 Creating screen-printed passive components for microwave applications Microelectron. Int. 27 84-92
8. Ko S-H, Chung J, Pan H, Grigoropoulos C P and Poulikakos D 2007 Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing Sensors Actuators A 134 161-8
9. Bidoki S M, Lewis D M, Clark M, Vakorov A, Millner P A and McGorman D 2007 Ink-jet fabrication of electronic components J. Micromech. Microeng. 17 109-11 (Pubitemid 46656150)
10. Andersson H, Manuilskiy A, Unander T, Lidenmark C, Forsberg S and Nilsson H-E 2012 Inkjet printed silver nanoparticle humidity sensor with memory effect on paper IEEE Sensors J. 12 1901-5
11. Unander T, Nilsson H-E and Oelmann B 2007 Printed touch sensor for interactive packaging and display 6th Int. Conf. on Polymers and Adhesives in Microelectronics and Photonics (Tokyo,) pp 12-7
12. Subramanian V et al 2008 Printed electronics for low-cost electronic systems: technology status and application development Proc. 38th Eur. Solid-State Device Res. Conf. ESSDERC (Edinburgh,)
13. Nilsson H-E, Unander T, Siden J, Andersson H, Manuilskiy A, Hummelgård M and Gulliksson M 2012 System integration of electronic functions in smart packaging applications IEEE Trans. Compon. Packag. Manuf. Technol. 2 1723-34
14. Alastalo A et al 2010 Printable WORM and FRAM memories and their applications Proc. LOPE-C (Frankfurt,) pp 8-12
15. Nilsson H-E, Andersson H, Manuilskiy A, Unander T, Hammarling K, Siden J and Gulliksson M 2011 Printed write once and read many sensor memories in smart packaging applications IEEE Sensors J. 11 1759-67
16. Tobjörk D and Österbacka R 2011 Paper electronics Adv. Mater. 23 1935-61
17. Wu J-T, Hsu S L-C, Tsai M-H and Hwang W-S 2010 Direct inkjet printing of silver nitrate/poly(n-vinyl-2-pyrrolidone) inks to fabricate silver conductive lines J. Phys. Chem. C 114 4659-62
18. Kim D and Moon J 2005 Highly conductive ink jet printed films of nanosilver particles for printable electronics Electrochem. Solid-State Lett. 8 30-3 (Pubitemid 41609831)
19. Perelaer J, de Gans B-J and Schubert U S 2006 Ink-jet printing and microwave sintering of conductive silver tracks Adv. Mater. 18 2101-4 (Pubitemid 44325298)
20. Malina D, Sobczak-Kupiec A, Wzorek Z and Kowalski Z 2012 Silver nanoparticles synthesis with different concentrations of Polyvinylpyrrolidone Dig. J. Nanomater. Biostruct. 7 1527-34
21. Li S, Liu P and Wang Q 2012 Study on the effect of surface modifier on self-aggregation behavior of Ag nano-particle Appl. Surf. Sci. 263 613-8
22. Wang H, Qiao X, Chen J, Wang X and Ding S 2005 Mechanisms of PVP in the preparation of silver nanoparticles Mater. Chem. Phys. 94 449-53 (Pubitemid 41508797)
23. Öhlund T, Örtegren J, Andersson H and Nilsson H-E 2009 Sintering methods for metal nanoparticle inks on flexible substrates 25th Int. Conf. on Digital Printing Technologies (Louisville,) pp 614-7
24. Allen M L, Aronniemi M, Mattila T, Alastalo A, Ojanpera K, Suhonen M and Seppa H 2008 Electrical sintering of nanoparticle structures Nanotechnology 19 175201 (Pubitemid 351588206)
25. Greer J R and Street R A 2007 Thermal cure effects on electrical performance of nanoparticle silver inks Acta Mater. 55 6345-9 (Pubitemid 47539251)
26. Perelaer J, de Laat A W M, Hendriks C E and Schubert U S 2008 Inkjet-printed silver tracks: low temperature curing and thermal stability investigation J. Mater. Chem. 18 3209-15
27. Öhlund T, Örtegren J, Forsberg S and Nilsson H-E 2012 Paper surfaces for metal nanoparticle inkjet printing Appl. Surf. Sci. 259 731-9
28. Öhlund T, Örtegren J, Andersson H and Nilsson H-E 2010 The importance of surface characteristics for structure definition of silver nanoparticle ink patterns on paper surfaces NIP26: Int. Conf. on Digital Printing Technologies and Digital Fabrication (Austin,) pp 309-13
29. Xie L, Mäntysalo M, López Cabezas A, Feng Y, Jonsson F and Zheng L-R 2012 Electrical performance and reliability evaluation of inkjet-printed Ag interconnections on paper substrates Mater. Lett. 88 68-72
30. Allen M, Leppäniemi J, Vilkman M, Alastalo A and Mattila T 2010 Substrate-facilitated nanoparticle sintering and component interconnection procedure Nanotechnology 21 475204
31. Wakuda D, Chang-Jae K, Keun-Soo K and Suganuma K 2008 Room temperature sintering mechanism of Ag nanoparticle paste Electronics System-Integration Technology Conf. ESTC (Greenwich,) pp 909-14
32. Magdassi S, Grouchko M, Berezin O and Kamyshny A 2010 Triggering the sintering of silver nanoparticles at room temperature ACS Nano 4 1943-8
33. Zapka W, Voit W, Loderer C and Lang P 2008 Low temperature chemical post-treatment of inkjet printed nano-particle silver inks Proc. 24th Int. Conf. on Digital Print. Technol./Digital Fabricat. (Pittsburgh,) pp 906-11
34. Tang Y, He W, Zhou G, Wang S, Yang X, Tao Z and Zhou J 2012 A new approach causing the patterns fabricated by silver nanoparticles to be conductive without sintering Nanotechnology 23 355304
35. Grouchko M, Kamyshny A, Mihailescu C F, Anghel D F and Magdassi S 2011 Conductive inks with a 'built-in' mechanism that enables sintering at room temperature ACS Nano 5 3354-9
36. Advanced Nano Products www.anapro.com
37. Dransmann G, Jünger C and Westfal H 1999 Printing material for ink-jet printing methods US Patent Specification 5,911,855
38. Tkunaga Y, Ashida T and Sugita H 2002 Silica dispersion, method for preparing the same and method for making ink-jet recording material using the same US Patent Specification 6,403,162
39. El Badawy A M, Luxton T P, Silva R G, Scheckel K G, Suidan M T and Tolyamat T M 2010 Impact of environmental conditions (pH, ionic strength, and electrolyte type) on the surface charge and aggregation of silver nanoparticles suspensions Environ. Sci. Technol. 44 1260-6