Palladium Electroplating

Modern Electroplating: Fifth Edition

Volumn , Issue , 2011, Pages 327-368

  Abys, Joseph A ^a  

^a Cookson Electronics Enthone Inc ^*  (United States)

Author keywords

Palladium electrodeposition palladium, plating from a wide variety of electrolytes; Palladium electroplating; Platinum group metals (PGMs), platinum group metal reaction with oxygen attack of platinum group metals by mineral acids

Indexed keywords

EID: 84885806547     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470602638.ch12     Document Type: Chapter

References (188)

1. Encyclopedia Americana, International Edition, Grolier Education, Danbury, CT, 1829-present.
2. Compton's Interactive Encyclopedia, 1993; 94 Compton's News Media, Inc.
3. I. E. Cottington, Platinum Met. Rev., 35 (3), 141-151 (1991).
4. J. H. Crockett, "Platinum," in Handbook of Geochemistry, Vol. 2, H. H. Wedepohl, Ed., Springer-Veiloy, New York, 1969, Sections B-G, K, M, 0.
5. T. L. Wright and M. Fleischer, "Geochemistry of the Platinum Metals," in Geological Survey Bulletin, 1214-A, U.S. Government Printing Office, Washington, DC, 1965, p. 24.
6. B. Mason, Principles of Geochemistry, 2nd ed., Wiley, New York, 1951, p. 310.
7. Platinum, Johnson Matthey, 1996-2009.
8. J. A. Abys, "A Unique Palladium Electrochemistry-Characteristics and Film Properties," paper presented at Second American Electroplaters Society Symposium on Economic Use of and Substitution for Precious Metals in the Electronics Industry, Danvers, MA, Sept. 1980.
9. H. K. Straschil, I. Kadija, J. J. Maisano, and J. A. Abys, PCIF Circuit World, 17 (2), 9-15, (1991).
10. E. J. Kudrak, J. A. Abys, I. Kadija, and J. J. Maisano, "Wear Reliability of GFPd vs. Hard Gold on a High Speed Digital Connector System," in Proc. 4th Annual Conf. American Electroplaters and Surfacee Finishers Society,Vol. II, Boston, MA, July 1990, p. 739.
11. H. K. Straschil, I. Kadija, J. J. Maisano, and J. A. Abys, "Electroplating of Thick and Ductile Palladium Nickel Alloys," in Proc. 4th Annual Conf. American Electroplaters and Surface Finishers Society,Vol. II, Boston, MA, July 1990, p. 1003.
12. I. Kadija, J. A. Abys, V. Chinchankar, and H. K. Straschil, "Electroplating of Thick and Ductile Palladium: A New Electroplating Technology," in Proc. 4th Annual Conf. American Electroplaters and Surface Finishers Society Vol. II, Boston, MA, July 1990, p. 759.
13. J. A. Abys, H. K. Straschil, I. Kadija, E. J. Kudrak, and J. Blee, Met. Finish., 89, 43 (1991).
14. J. Stevenson and L. Mayer, paper presented at IICIT Annual Symp., Philadelphia, PA, 1989.
15. J. A. Abys, J. J. Masisano, C.Wolowodiuk, and H. K. Straschil, "Palladium Nickel Alloy Electroplating," Proc. Connectors '89 Conf., Coventry, England, The Institute of Metal Finishing, March 1989, p. 19.
16. M. Antler, Platinum Met. Rev., 31 (1), 13-19 (1987).
17. W. A. Fairweather, Trans. Inst. Met. Finish., 64 (3), 1 (1986).
18. A. Graham and S. Updegraff, "Properties of Palladium-Nickel Alloy and Pure Palladium for Connector Applications," in Proc. NEPCON Conf., Anaheim, CA, 1984.
19. American Electroplaters Society Symp. on Economic Use of and Substitution for Precious Metals in the Electronics Industry, Danvers, MA, 1982.
20. American Electroplaters Society Symp. on Substitution for Gold, Milwaukee, WI, 1980.
21. D. Gravitz, Electronic Packaging Prod. (Feb. 1982).
22. I. H. Brockman et al., in Proc. Holm Conf., 1988, pp. 73-83.
23. H. Grossman et al., in Proc. Holm Conf., 1984, pp. 551-560.
24. D. Ruhlicke et al., in Proc. Holm Conf., 1984, pp. 83-88.
25. S. W. Updegraff, in Proc. ICEC, 1986, pp. 399-403.
26. A. H. Graham, in Proc. Holm Conf., 1984, pp. 61-67.
27. G. J. Russ, IEEE Trans. Component Hybrid Manuf. Tech., CHMT 6 (4), 389-395 (Dec. 1983).
28. E. J. Kudrak, J. A. Abys, I. Kadija, and J. J. Maisano, in Proc. Annual Conf. American Electroplaters and Surface Finishers Society, Boston, MA, July 1990.
29. E. J. Kudrak et al., in Proc. of the 78th Annual Conference of the American Electroplaters and Surface Finishing Society, July 1991.
30. H. K. Straschil et al., Metal Finish. (Jan. 1992).
31. E. J. Kudrak et al. , Plating Surf. Finish. (Feb. 1992).
32. T. Sato et al., in Proc. 26th Annual Holm Conf. on Electrical Contacts, 1980, pp. 41-47.
33. A. H. Graham, in Proc. 30th Annual Holm Conf. on Electrical Contacts, 1980, pp. 61-67.
34. T. Sato, Plating Surf. Finish., 74, 55-59 (1987).
35. M. Antler, ASLE Trans., 26 (3), 376-380 (1983).
36. W. O. Freitag, in Proc. of Holm Seminar on Electrical Contacts, Chicago, 1975, pp. 17-23.
37. R. H. Atkinson and A. R. Raper, J. Electrodep. Tech. Soc., 8 (10), 1 (1933).
38. F. H. Reid, Plating, 52, 531 (1965).
39. H. D. Hedrich and C. J. Raub, Metalloberflache, 311 (11), 512-520 (1977).
40. R. Weil, Plating, 60, 1231 (1970); 61, 50, 127 (1971).
41. H. D. Hedrich and C. J. Raub, Gaivanotechnik, 70 (10), 934-939 (1979).
42. H. D. Hedrich and C. J. Raub, Surface Technol., 8, 347-362 (1979).
43. F. H. Reid, Metall. Rev., 8 (30), 167-211 (1963).
44. Periodic Table of the Elements, Sargent-Welsh Scientific Company, Skokie, IL.
45. Platinum Group Metals, Printing and Publishing Office, National Academy of Science, Washington, DC.
46. A. R. Powell, "The Platinum Metals in the Periodic System: A Comparative Study of the Transition Metals," Platinum Met. Rev., 4, 144-149 (1960).
47. E. M. Wise, Palladium Recovery, Projection and Use, Academic, New York, 1968, p. 187.
48. W. Hume-Rothery, "The Platinum Metals and Their Alloys: A Review of Their Electronic Structure and Constitution," Platinum Met. Rev., 10, 94-100 (1966).
49. F. A. Lewis, The Palladium-Hydrogen System, Academic, New York, 1967, p. 178.
50. F. A. Cotton and G. Wilkinson, Advanced Inorganic Chemistry, 4th ed., Wiley, New York, 1980.
51. F. R. Hartley, The Chemistry of Platinum and Palladium, Wiley, New York, 1973, p. 544.
52. S. Otsuka, S. Y. Tatsuno, and K. Ataka, "Univalent Palladium Complexes," J. Am. Chem. Soc., 93, 6705-6706 (1971).
53. R. A. Reinhardt and W.W. Monk, Inorg. Chem., 9, 2026-2030 (1970).
54. F. Bosolo and R. G. Pearson, Proc. Inorg. Chem., 4, 381-453 (1962).
55. N. V. Sidgwick, The Electronic Theory of Valency, Oxford University Press, London, 1929, p. 163.
56. F. Basolo and R. O. Pearson, Mechanisms of Inorganic Reactions, Wiley, New York, 1967, p. 526.
57. G. E. Coates, M. L. H. Green, and K. Wade, Organometallic Compounds, Vol. 2, The Transition Elements, Methuen, London, 1968, p. 6.
58. A. F. Bard, R. Parsons, and J. Jordan, Eds., Standard Potentials in Aqueous Solutions, Marcel Dekker, New York, 1988.
59. R. M. Izatt, R. Eatough, and J. J. Christensen, J. Chem. Soc. A, 1301 (1967).
60. D. H. Templeton, G.W.Watt, and C. S. Garner, J. Am. Chem. Soc., 65, 1608 (1943).
61. R. N. Goldberg and L. H. Hepler, Chem. Rev., 68, 229 (1968).
62. R. M. Izatt et al., J. Chem. Soc. A, 2514 (1970).
63. E. Jackson and D. A. Pantony, J. Appl. Electrochem., 1, 283 (1971).
64. M. Pourboix, Ed., Atlas Dequilibres Electrochimiques @ 25'C, Gothier-Villars, Paris, 1963, p. 359.
65. A. B. Fasman, G. G. Kutyyukov, and D. V. Sokalski, Zh. Neorg. Khim., 10, 1338 (1965).
66. V. L. Kravstov and M. I. Zelenski, Elektrokimiya, 2, 1138 (1966).
67. T. Ryhl, Acta. Chem. Scand., 26, 2961 (1972).
68. A. V. Babaeva and E. Y. Khananova, Zh. Neorg. Khim., 10, 2579 (1965).
69. H. K. Birnbaum, "Hydrogen Embrittlement," in Encyclopedia of Material Science and Engineering, M. B. Bever, Ed., Pergamon, New York, 1986.
70. J.W. Dini, Electrodeposits, The Material Science of Coatings and Substrates, Noyes Publication 367, Noyes, Park Ridge, NJ, 1993.
71. S. Nakahara and Y. Okinaka, "Microstructure and Ductility of Electroless Copper Deposits," Acta Metall., 31, 713 (1983).
72. L. J. Durney, "Hydrogen Embrittlement: Baking Prevents Breaking," Prod. Finish., 49, 90 (1995).
73. H. Geduld, Zinc Plating, ASM International, Columbus, OH, 1988, p. 203.
74. M. Fleischmann, S. Pons, and M. Hawkins, J. Electroanal. Chem., 261, 301 (1989).
75. S. E. Jones et al., Nature, 338, 737 (1989).
76. J. M. Rosamilia, J. A. Abys, and B. Miller, Electrochimica Acta, 36 (7), 1203-1208 (1991).
77. J. R. Lacher, Proc. Roy. Soc., A161, 525 (1937).
78. L. J. Gillespie and L. S. Galstoun, J. Am. Chem. Soc., 58, 2565 (1935).
79. L. J. Gillespie andW. R. Downs, J. Am. Chem. Soc., 61, 2496 (1939).
80. J. W. Simons and T. B. Flanagan, J. Phys. Chem., 69, 3581, 3773 (1965).
81. A. N. Frumkin and N. Aladjalowa, Acta Physiochem. USSR, 19, I (1944).
82. T. P. Hoan and D. F. Arrowsmith, Electroplat. Met. Finish., 10, 5, 1 (1957).
83. M. Baidouf and D. M. Kolb, Electrochim. Acta, 38 (15), 2145-2153 (1994).
84. V. D. Jovic et al., J. Serb. Chem. Soc., 57 (12), 951-962 (1993).
85. M. Enyo and P. C. Biswas, J. Electroanal. Chem., 335 (1-2), 309-319 (1993).
86. L. J. Vracar and M. Stojanovic, J. Serb. Chem. Soc., 61 (7), 567-575 (1996).
87. B. I. Podlovchenko, E. A.Kolyadko, and S. Lu, J. Electroanal. Chem., 399 (1-2), 21-27 (1995).
88. I.-Y. Wei and J. Brewer, in Proc. Annual Technical Conf. on American Electroplaters and Surface Finishers Society, 1995, pp. 321-332.
89. A. V. Smolin, Y. M. Maksimov, and B. F. Podlovchenko, Russ. J. Electrochem, 31 (6), 520-525 (1995).
90. J. O. M. Bockris and A. K. N. Reddy, Modern Electrochemistry, Plenum, New York, 1970, pp. 1223, 1227, 1053.
91. P. H. Rieger, Electrochemistry, 2nd ed., Chapman and Hall, London, 1984, pp. 183-194.
92. A. J. Bard and L. R. Faulkner, Electrochemical Methods, Wiley, New York, 1980.
93. R. J. Morrisey, Metal Finishing Guidebook-Directory 97, p. 288.
94. USSR Patent 519,497 (June 30, 1976).
95. F. A. Lowenheim, Electroplating, McGraw-Hill, New York, 1978, p. 299.
96. J. M. Stevens, Trans. Inst. Met. Fin., 46, 26 (1968).
97. H. L. Grube, Metalloberflache, B5 (4), 61 (1953).
98. W. Keitel and H. Zschiegner, Trans. Electrochem. Soc., 59, 273 (1931).
99. T. F. Davis, U.S. Patent 4,092,225 (May 30, 1978).
100. H. J. Schuster and K. D. Heppner, U.S. Patent 4,144,141 (Mar. 3, 1979).
101. J. A. Abys, U.S. Patent 4,486,274 (Dec. 4, 1984).
102. R. LePenven, W. Levanson, and W. Pletcher, J. Appl. Electrochem., 22 (51), 421-424 (1992).
103. L. A. Heathcote, Platinum Met. Rev., 9 (3), 80-82 (1965).
104. J. A. Abys, The Electrodeposition of Pure Palladium with a Palladium Hydroxide Replenishment System, American Electroplaters Society Symposium, AESF Week, Orlando, FL, 1991.
105. J. A. Abys and Y. Okinaka, U.S. Patent 4,468,296 (Aug. 28, 1984).
106. J. A. Abys and Y. Okinaka, U.S. Patent 5,135,622 (Aug. 4, 1992).
107. S. Nakhara et al., J. Testing Eval., 5, 178 (1977).
108. J. J. Caricchio and E. R. York, U.S. Patent 4,076,599 (Feb. 28, 1978).
109. J. M. Deuber, U.S. Patent 4,098,656 (July 4, 1978).
110. J. A. Abys, V. Chinchankar, V. T. Eckert, I. Kadija, E. J. Kudrak, J. J. Maisano, and H. K. Straschil, U.S. Patent 4,911,799 (Mar. 27, 1990).
111. U.S. Patent 2,457,021 (1948).
112. F. Simon and W. Zilske, Plating Surf. Finish., 69, 86 (1982).
113. J. A. Abys and H. K. Straschil, U.S. Patent 5,178,745 (Jan. 12, 1993).
114. H. K. Straschil, J. A. Abys, E. J. Kudrak, J. J. Maisano, and S. Nakahara, "New Palladium Strike Improves Adhesion and Porosity," Met. Finish., 90, 42-47 (1992).
115. P. K. Gallagher, Thermochimica Acta, 41, 323-327 (1980).
116. J. A. Abys, unpublished data.
117. H. P. Hedrich and Ch. J. Raub, Metalloberflache, 33 (8), 308-315 (1979).
118. F. I. Nobel et al., Plating Surf. Finish., 73 (6), 88-93 (1986).
119. U. Cohen and R. Sard, U.S. Patent 4,269,671 (May 26, 1981).
120. U. Cohen, F. Kohn, and R. Sard, J. Electrochem. Soc., 130, 1987 (1983).
121. D. Walz and Ch. J. Raub, Metalloberflache, 40, 162-166, 199-203 (1986).
122. T. Hirano and M. Tsukemato, U.S. Patent 5,342,504 (Aug. 30, 1994).
123. K. S. Berge, U.K. Patent Application 2,115,440A (Sept. 22, 1982).
124. K. S. Berge, U.S. Patent 4,416,740 (Nov. 22, 1983).
125. K. S. Berge, U.S. Patent 4,430,172 (Feb. 7, 1984).
126. P. Wilkinson, U.K. Patent Application 2,115,440A (Sept. 7, 1983).
127. D. Walz and Ch. J. Raub, Metalloberflache, 40 (6), 239-241 (1986).
128. I. Boguslavsky, J. A. Abys, H. K. Straschil, M. Tsuruta, J. J. Maisano, and V. T. Eckert, in Proc. Annual Conference American Electroplaters and Surface Finishers Society, Detroit, MI, June 1997.
129. M. Kume, paper presented at 76th Technical Conf. of the Metal Finishing Society of Japan, Paper 3OC-7, 1987.
130. G. T. Rado and H. Suhl, Magnetism, Vol. 5, Academic, New York, 1973.
131. Platinum Met. Rev., 37 (2), 120 (1993).
132. P. Juzkis, M. U. Kittel, and Ch. J. Raub, private communication, Research Institute for Precious Metals.
133. P. Stevens, U.S. Patent 4,048,023 (Sept. 13, 1977).
134. S. N. Vinogradow and P. Yu, Perelygin, Zashch. Met., 16 (4), 507 (1980).
135. A. A. Tikhonov, P. M. Vyacheslavov, G. K. Burkat, and V. P. Bursin, Modern Methods of Deposition of Electrolytic and Chemical Coatings (in Russian), lzd. Mosk. Doma Nauchn.-Tekhn. Propagandy Im. F. E. Dzerzhinskogo, 1979, p. 79.
136. E. M. Savitskii et al., Metallic Single Crystals (in Russian), lzd. Nauka, Moscow, 1976, p. 127.
137. E. M. Savitskii et al., Alloys of Noble Metals (in Russian), lzd. Nauka, Moscow, 1977, p. 224.
138. L. M. Nomerovannaya et al., Dokl. Akad. Nauk SSSR, 246 (3), 585 (1979).
139. A. M. Meretskii et al., Metally, 5, 193 (1976).
140. N. F. Reshetnikova and K. S. Pedan, Zh. Prikladoni Khimii, 55 (9), 1966-1999 (1982).
141. F. M. Dzhandubaeva, P. M. Vyacheslavov, and G. K. Burkat, Zashchita Metallov, 18 (3), 427-430 (1982).
142. R. Long and K. F. Bradform, in Proc. 8th International Conf. on Electrical Contact Phenomena, Tokyo, Japan, 1970.
143. W. A. Crossland and E. Knight, in Proc. Seminar on Electrical Contacts, Chicago, 1973, p. 247.
144. U. Cohen and R. Sard, U.S. Patent 4,269,671 (May 26, 1981).
145. U. Cohen, F. Kohn, and R. Sard, J. Electrochem. Soc., 130, 1987 (1983).
146. U. Cohen, K. R. Walton, and R. Sard, J. Electrochem. Soc., 131 (11), 2489 (1988).
147. F. I. Nobel, IEEE Trans. Components, Hybrids Manuf. Technol., 9 (1), (1985).
148. F. I. Nobel et al., Plating Surf. Finish., 73, 88 (1986).
149. P. L. Cavallotti et al., Proc. Electrochem. Soc., 6, 261-276 (1994).
150. M. Kume and U. Tadeo, Hyomen Gijutsu, 46 (17), 663-666 (1995).
151. S. N. Vinogradov and S. V. Plokohov, Gai'venotekh Obrab. Poverkhn, 1 (1-2), 32-34 (1992).
152. M. Noro et al., Kagaku to Kogoyo, 69 (3), 89-94 (1995).
153. J. A. Abys and H. K. Straschil, U.S. Patent 5,024,733 (June 18, 1991).
154. L. Wang, Cailiao Baohu, 27 (5), 24-25 (1994).
155. Soviet Union Patent 535,378 (Nov. 26, 1976).
156. Platinum 1998, Johnson Matthey.
157. U.S. Geological Survey, Mineral Commodity Summaries, Jan. 1999.
158. M. Lovatt, Bridge News, Feb. 16, 2000.
159. C. Fan et al., in Proc. Annual Conference American Electroplaters and Surface Finishers Society, Chicago, IL, June 2000.
160. E. J. Kudrak et al., Proc. 32nd IICIT Connector and Interconnection Technology Symposium, Anaheim, CA, Sept. 1999.
161. J. A. Abys et al., Trans. Inst. Metal Finish., (July 1999).
162. J. A. Abys et al., Connector Specifier, Feb. 1999, p. 12.
163. J. Abys, paper presented at Fleck Materials Conf., Indian Wells, CA, Sept. 1998.
164. I. Boguslavsky et al., in Proc. Annual Conference American Electroplaters and Surface Finishers Society, Session L, Minneapolis, MN, June 1998.
165. J. A. Abys et al., Plating Surf. Finish., 86, 108 (Jan. 1999).
166. M. Clarke, in "Properties of Electrodeposits," R. Sard, H. Leidheiser, and F. Ogburn, Eds., The Electrochemical Society, Princeton, NJ, 1975, p. 122.
167. Standard 17000, Sect. 1275,Western Electric Manufacturing, 1982, based on ASTM B-799.
168. G. C. Munie et al., J. SMT, Jan. 2000, p. 15.
169. P. Wilkinson and B. O'Hara, IPC PC World Convention, May 1984.
170. L. J. Mayer et al., in Proc. IPC-Fall Session, Sept. 1986.
171. I. Kadija et al., in Proc. Annual Conference American Electroplaters and Surface Finishers Society, June 1993.
172. I. Kadija et al., Plating Surf. Finish., 82 (2), 56 (Feb. 1995).
173. T. Mc Guiggan and E. E. Benedetto, "Impact of Palladium Leadframes on PCA Manufacturing,"Circuits Assembly, Nov. 1997, pp. 32-36.
174. C. Fan et al., in Proc. Symposium on Environmental Aspects of Electrochemical Technology: Applications in Electronics, M. Datta, J. M. Fenton, and E. W. Brooman, Eds., PV 96-21, The Electrochemical Society, Pennington, NJ, 1997, p. 188.
175. European Patent Application 87305080.1 by Texas Instruments (1987).
176. European Patent Application 89302939.7 by Texas Instruments (1989).
177. D. C. Abbott et al., IEEE Trans. Components Hybrids Manufacturing Technol., 14 (3), 567 (Sept. 1991).
178. C. A. Dullaghan et al., in Proc. Annual Conference American Electroplaters and Surface Finishers Society, Session 1, Chicago, IL, June 2000.
179. M. E. Baugartner and D. R. Gabe, Trans. IMF, 78 (1), 11; 78 (2), 79 (2000).
180. E. Von Gunther et al., Galvanotechnik, 1, 206 (2007).
181. S. V. Kabanov et al., Russian J. Appl. Chem., 74 (11), 1895 (2001).
182. I. Bougslavsky and J. A. Abys, in Proc. 29th Annual Conference and Interconnection Symposium, Oct. 1996.
183. M. Zhong, L. He, K. Xia and Z. Z. Chen, J. Mater. Protection (Chinese), 39 (6), 26 (June 2006).
184. S. N. Vinogradov et al., Russian Electrochem., 37 (7), 838-840 (2001).
185. H. H. Nowsky et al., Russian J. of Electrochem., 42 (3), 264-271 (2006).
186. I. Gadschov and R. Mantcheva, Galvanotechnik, 97 (8), 1850-1854 (2006).
187. F.Y. Su, I.W. Sun, and C. C. Tai, Meeting Abstracts, presented at 207th Electrochemistry Society Meeting, Quebec, Canada, Mar. 2005.
188. J. A. Abys, in Proceeding of the Symposium on Surface Engineering For Electronics, Singapore, Dec. 2006; Proceedings of EUROMAT, Nuremberg, Germany, Sept. 2007.