Development of particle interface bonding in thermal spray coatings: A review

Journal of Thermal Spray Technology

Volumn 22, Issue 2-3, 2013, Pages 192-206

  Li, Chang Jiu ^a   Yang, Guan Jun ^a   Li, Cheng Xin ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

coating; lamellar interface bonding; microstructure; thermal spraying

Indexed keywords

DEPOSITION CONDITIONS; DEPOSITION TEMPERATURES; HIGH CATALYTIC PERFORMANCE; HIGH SPECIFIC SURFACE AREA; INTERFACE BONDING RATIO; LAMELLAR INTERFACES; MICROSTRUCTURES AND PROPERTIES; THERMAL SPRAY COATINGS;

ATMOSPHERIC TEMPERATURE; CERAMIC COATINGS; CERAMIC MATERIALS; COATINGS; DEPOSITS; GRAIN GROWTH; INTERFACES (MATERIALS); MICROSTRUCTURE; POROUS MATERIALS; THERMAL SPRAYING;

BONDING;

EID: 84885660798     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-012-9864-9     Document Type: Conference Paper

References (76)

1. J. Bisson, C. Moreau, M. Dorfman, C. Dambra, and J. Mallon, Influence of Hydrogen on the Microstructure of Plasma-Sprayed Yttria-Stabilized Zirconia Coatings, J. Therm. Spray Technol., 2005, 14, p 85-90
2. C.-J. Li and A. Ohmori, Relationship between the Structure and Properties of Thermally Sprayed Deposits, J. Thermal Spray Technol., 2002, 11, p 365-374
3. R. McPherson, A Model for the Thermal Conductivity of Plasma-Sprayed Ceramic Coatings, Thin Solid Films, 1984, 112, p 89-95
4. Y. Li, C.-J. Li, G.-J. Yang, and C.-X. Li, Relation Between Microstructure and Thermal Conductivity of Plasma-Sprayed 8YSZ Coating, Int. J. Mod. Phys. B, 2010, 24(15-16), p 3017-3022
5. 3 Coating for the Cathode of SOFCs, Surf. Coat. Technol., 2005, 198, p 278-282
6. Y.Z. Xing, C.-J. Li, Q. Zhang, C.-X. Li, and G.-J. Yang, Influence of Microstructure on the Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits, J. Am. Ceram. Soc., 2008, 91(12), p 3931-3936
7. R. McPherson and B.V. Shafer, Interlamellar Contact within Plasma-Sprayed Coatings, Thin Solid Films, 1982, 97, p 201-204
8. C.-J. Li, A. Ohmori, and R. McPherson, The Relationship Between Microstructure and Young's Modulus of Thermally Sprayed Ceramic Coatings, J. Mater. Sci., 1997, 32, p 997-1004
9. 2 Coatings, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Materials Park, OH, USA, 2009 CD-ROM, p 939-944
10. 3 Coatings, J. Therm. Spray Technol., 2011, 20, p 160-169
11. C.C. Berndt and R. McPherson, A Fracture Mechanics Approach to the Adhesion of Flame and Plasma Sprayed Coatings, Proceedings of the 9th International Thermal Spraying Conference, Hague, 1980, Nederland Inst. Voor Lastetechnik, 1980, p 310-316
12. 3 Coatings on Lamellar Structure, J. Therm. Spray Technol., 2004, 13, p 425-431
13. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, John Wiley & Sons Ltd., Chichester, 1995
14. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park, OH, 2004
15. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 12, p 280-284
16. R. Henne, Solid Oxide Fuel Cells: A Challenge for Plasma Deposition Processes, J. Therm. Spray Technol., 2007, 16, p 381-403
17. R. Hui, Z. Wang, O. Kesler, L. Rose, J. Jankovic, S. Yick, R. Maric, and D. Ghosh, Thermal Plasma Spraying for SOFCs: Applications, Potential Advantages, and Challenges, J. Power Sources, 2007, 170, p 308-323
18. C.-J. Li, X.-J. Ning, and C.-X. Li, Effect of Densification Process on the Properties of Plasma-Sprayed YSZ Electrolyte coatings for Solid Oxide Fuel Cell, Surf. Coat. Technol., 2005, 190, p 60-64
19. C.-J. Li, Y. Li, G.-J. Yang, and C.-X. Li, A Novel Plasma-Sprayed Durable Thermal Barrier Coating with the Well-Bonded YSZ Interlayer between Porous YSZ and Bond Coat, J. Therm. Spray Technol., 2012, 21(3-4), p 383-390
20. Y.Z. Xing, Y. Li, C.-J. Li, C.X. Li, and G.J. Yang, Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats, Key Eng. Mater., 2008, 373-374, p 69-72
21. 3 Coatings," Thesis, 2010, Xi'an Jiaotong University (in Chinese)
22. Y.-Z. Xing, C.-J. Li, C.-X. Li, and G.-J. Yang, Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria Stabilized Zirconia as an Electrolyte in Solid Oxide Fuel Cells, J. Power Sources, 2008, 176, p 31-38
23. Y. Arata, A. Ohmori, and C.-J. Li, Study on the Structure of Plasma Sprayed Ceramic Coating by Using Copper Electroplating, Proceedings of International Symposium on Advanced Thermal Spraying Technology and Allied Coatings (ATTAC'88), Japan High Temperature Society, Osaka, 1988, p 205-210
24. 3 Coating by Using Copper Electroplating, Thin Solid Films, 1991, 201, p 241-252
25. Y. Arata, A. Ohmori, and C.-J. Li, Characteristics of Metal Electroplating to Plasma Sprayed Ceramic Coatings, Trans. Jpn. Weld. Res. Inst., 1987, 16, p 259-265
26. Y. Arata, A. Ohmori, and C.-J. Li, Electrochemical Method to Evaluate the Connected Porosity in Ceramic Coatings, Thin Solid Films, 1988, 56, p 315-325
27. 3 Coatings on Microstructure, J. Jpn. High Temp. Soc., 1990, 16(Suppl), p 332-340 (in Japanese)
28. P. Bengtsson and T. Johannesson, Characterization of Microstructural Defects in Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Technol., 1995, 4(3), p 245-251
29. K. Niemi, P. Vuoristo, E.K. Kumpulainen, P. Sorsa, and T. Mäntylä, Recent Developments in the Characteristics of Thermally Sprayed Oxide Coatings, Proceedings of the 14th ITSC, A. Ohmori, Ed., Japan High Temperature Society, Kobe, 1995, p 687-692
30. K. Moriya, W. Zhao, and A. Ohmori, Improvement of Plasma-sprayed Ceramic Coatings, Proceedings of the 14th ITSC, A. Ohmori, Ed., Japan High Temperature Society, Kobe, 1995, p 1017-1021
31. K. Miyajima, N. Nomura, Y. Harada, and H. Nakahira, Refining of Sprayed Oxide Coating by Chemically Densifying Method, J. Jpn. High Temp. Soc., 1992, 18(Suppl), p 307-313 (in Japanese)
32. B.R. Marple, J. Voyer, and P. Béchard, Sol Infiltration and Heat Treatment of Alumina-Chromia Plasma-Sprayed Coatings, J. Eur. Ceram. Soc., 2001, 21(7), p 861-868
33. 3 Coating by Adhesives Impregnation, J. Mater. Sci. Lett., 2003, 22, p 1499-1501
34. G.-J. Yang, C.-J. Li, C.-X. Li, A. Ohmori, and K. Kondoh, Improvement of Adhesion and Cohesion in Plasma sprayed Ceramic Coatings by Heterogeneous Modification of Nonbonded Interface through High Strength Adhesive Infiltration, J. Therm. Spray Technol., 2012, doi: 10.1007/s11666-012-9831-5
35. C.-J. Li and W.-Z. Wang, Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Alumina Coating by Visualization of Voids Distribution, Mater. Sci. Eng. A, 2004, 386, p 10-19
36. C.-J. Li, G.-J. Yang, and A. Ohmori, Relationship Between Particle Erosion and Lamellar Microstructure for Plasma Sprayed Alumina Coatings, Wear, 2006, 260, p 1166-1172
37. 3 Coatings, Trans. Jpn. Weld. Res. Inst., 1990, 19, p 259-270
38. 3 Coatings, Tagungsband Conference Proceedings (2005 Int. Thermal Spray Conf.), E. Lugscheider, Ed., May 2-5 (Bussel, Switzerland), German Welding Research Institute, Germany, 2005, p 1506-1510
39. 3 Coatings, Thermal Spray, Current Status and Future Trends, A. Ohmori, Ed., Japan High Temperature Society, 1995, p 501-506
40. 3 Coating, Surf. Coat. Technol., 1996, 82, p 254-258
41. A. Ohmori, C.-J. Li and Y. Arata, Structure of Plasma-Sprayed Alumina Coatings Revealed by Using Copper Electroplating, Proceedings of 4th National Thermal Spray Conference, 12-16 May 1991 (Pittsburgh, USA), ASM International, 1992, p 105-113
42. W.Z. Wang, "Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Coatings and Relationship Between Lamellar Microstructure and Properties of Coatings," Ph.D Thesis, 2004, Xi'an Jiaotong University (In Chinese)
43. P. Fauchais, M. Vardelle, A. Vardelle, and J.F. Coudert, Plasma Spraying of Ceramic Particles in Argon-Hydrogen D.C. Plasma Jets: Modeling and Measurements of Particles in Flight Correlation with Thermophysical Properties of Sprayed Layer, Metall. Trans., 1989, 20B, p 263-276
44. R. McPherson and P. Cheang, Microstructural Analysis of Ni-Al Plasma-Sprayed Coating, Proceedings of the 12th ITSC, British Welding Society, 1989, p 17-1
45. S. Kuroda and S. Kitahara, Effect of Spray Conditions on the Pore Structure and Quenching Stress in Plasma Sprayed Coating, Thermal Spray, Current Status and Future Trends, A. Ohmori, Ed., Japan High Temperature Society, 1995, p 489-494
46. C. Takahashi and T. Senda, On the Pore Structure of Plasma Sprayed Films, Thermal Spray, Current Status and Future Trends, A. Ohmori, Ed., Japan High Temperature Society, 1995, p 921-926
47. S. Boire-Lavigne, C. Moreau, and R.G. Saint-Jacques, The Relationship Between the Microstructure and Thermal Diffusivity of Plasma-Sprayed Tungsten Coating, J. Therm. Spray Technol., 1995, 4(3), p 261-267
48. J. M. Houben, Remarks Concerning a Rational Plasma for Thermal Spraying, In General Aspects of Thermal Spraying, Preprints of 9th International Thermal Spray Conference, 19-23 May 1980 (Hague), Nederlands Institut voor Lastechniek, 1980, p 143-154
49. A. Kulkarni, J. Gutleber, S. Sampath, A. Goland, W.B. Lindquist, H. Herman, A.J. Allen, and B. Dowd, Studies of the Microstructure and Properties of Dense Ceramic Coatings Produced by High-Velocity Oxygen-Fuel Combustion Spraying, Mater. Sci. Eng., A, 2004, 369, p 124-137
50. C.-J. Li and G.-J. Yang, Relationships Between Feedstock Structure, Particle Parameter, Coating Deposition, Microstructure and Properties in Thermally Sprayed Conventional and Nanostructured WC-Co, Int. J. Refrig. Met. Hard Mater., 2012, doi: 10.1016/j.ijrmhm.2012.03.014
51. A. Vardelle, M. Vardelle, R. McPherson, and P. Fauchais, Study of the Influence of Particle Temperature and Velocity Distribution within a Plasma Jet Coating Formation, Proceedings of the 9th International Thermal Spraying Conference, Hague, 1980, Nederland Inst. Voor Lastetechnik, 1980, p 55-61
52. M. Vardelle, A. Vardelle, and P. Fauchais, Study of the Trajectories and Temperatures of Powders in a D.C. Plasma Jet - Correlation with Alumina Sprayed Coatings, Proceedings of the 10th International Thermal Spraying Conference, Essen, May 1983, German Welding Society, 1983, p 88-92
53. H.-D. Steffens, K.-H. Busse, and M. Schneider, Spray Particle Behavior in a Low Pressure Plasma Jet, Advances in Thermal Spraying, Proceedings of the 11th International Thermal Spray Conference, Canada, Welding Institute of Canada, 1986, p 49-59
54. R. Kawase, H. Nakajima, K. Maehara, M. Korama, and H. Abe, Influence of Spray Parameters on Detonation Coating Properties, Proceedings of International Symposium on Advanced Thermal Spraying Technology and Allied Coatings (ATTAC'88), Japan High Temperature Society, Osaka, 1988, p 55-60
55. 2 Coatings through Deposition Temperature, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Materials Park, OH, USA, 2009, CD-ROM, p 957-962
56. 3 Splats, 2013 (to be published)
57. D.M. Gray, Y.C. Lau, C.A. Johnson, M.P. Borom, and W.A. Nelson, Thermal Barrier Coatings Having an Improved Columnar Microstructure, US Patent, 5830586, 1998
58. I.-H. Jung, K.-K. Bae, M.-S. Yang, and S.-K. Ihm, A Study of the Microstructure of Yttria-Stabilized Zirconia Deposited by Inductively Coupled Plasma Spraying, J. Therm. Spray Technol., 2000, 9(4), p 463-477
59. H.B. Guo, R. Vaßen, and D. Stöver, Atmospheric Plasma Sprayed Thick Thermal Barrier Coatings with High Segmentation Crack Density, Surf. Coat. Technol., 2004, 186, p 353-363
60. H.B. Guo, S. Kuroda, and H. Murakami, Segmented Thermal Barrier Coatings Produced by Atmospheric Plasma Spraying Hollow Powders, Thin Solid Films, 2006, 506-507, p 136-139
61. H.B. Guo, H. Murakami, and S. Kuroda, Effect of Hollow Spherical Powder Size Distribution on Porosity and Segmentation Cracks in Thermal Barrier Coatings, J. Am. Ceram. Soc., 2006, 89(12), p 3797-3804
62. A. Tricoire, A. Vardelle, P. Fauchais, F. Braillard, A. Malie, and P. Bengtsson, Macrocrack Formation in Plasma-sprayed YSZ TBCs When Spraying Thick Passes, High Temp. Mater. Process., 2005, 9, p 401-413
63. M. Karger, R. Vassen, and D. Stover, Atmospheric Plasma Sprayed Thermal Barrier Coatings with High Segmentation Crack Densities: Spraying Process, Microstructure and Thermal Cycling Behavior, Surf. Coat. Technol., 2011, 206, p 16-23
64. 3 Coatings, Surf. Coat. Technol., 1992, 50, p 213-222
65. G.-J. Yang, X.-H. Kang, C.-X. Li, and C.-J. Li, Influence of Deposition Temperature on the Splat Bonding and Mechanical Properties of Plasma-Sprayed Tungsten Coatings, Rare Met. Mater. Eng., 2012, 41(S1), p 394-398
66. E.-J. Yang, G.-J. Yang, X.-T. Luo, C.-J. Li, and M. Takahashi, Epitaxial Grain Growth during Splat Cooling of Alumina Droplets Produced by Atmospheric Plasma Spraying, J. Therm. Spray Technol., 2013, 22(2), doi: 10.1007/s11666-012-9862-y
67. T. Chraska and A.H. King, Transmission Electron Microscopy Study of Rapid Solidification of Plasma Sprayed Zirconia - Part I. First Splat Solidification, Thin Solid Films, 2001, 397, p 30-39
68. X.-M. Wang, C.-J. Li, C.-X. Li, and G.-J. Yang, Microstructure and Electrochemical Behavior of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying for Solid Oxide Fuel Cell Application, J. Therm. Spray Technol., 2010, 19(1-2), p 311-316
69. E. Ivers-Tiffe, A. Weber, and D. Herbstritt, Materials and Technologies for SOFC-Components, J. Eur. Ceram. Soc., 2001, 21, p 1805-1811
70. C.-J. Li, X.-M. Wang, C.-X. Li, and G.-J. Yang, Deposition of Surface-Melted YSZ Particles by Flame Spraying, Proceedings of ITSC2011, DVS, Hamburg, 2011, CD-ROM
71. C.-X. Li, Z.-H. Song, Y. Zhang, C.-J. Li, and G.-J. Yang, Enhancement of SOFC Cathode Performance through Structured Electrolyte/Cathode Interface with ScSZ Convex Particle of High Electrical Conductivity, Presented as 18th International Conference on Solid State Ionics, Sept. 4-8, 2011, Warsaw, Poland
72. B. Bhushan and Y. Chae Jung, Natural and Biomimetic Artificial Surfaces for Superhydrophobicity, Self-Cleaning, Low Adhesion, and Drag Reduction, Prog. Mater. Sci., 2011, 56, p 1-108
73. B. Chen, C.-J. Li, T. Guo, and J.-T. Yao, Structured Surface with Super-Hydrophobicity through Surface-Molten Particle Deposition by Flame Spraying Assisted with Modification (to be published)
74. B. Chen, C.-J. Li, G.-J. Yang, J.-T. Yao, H.-B. Huo, and C.-X. Li, Fabrication of Porous Molybdenum by Controlling Spray Particle State, J. Therm. Spray Technol., 2012, 21, p 1032-1045
75. J. Zou, C.-J. Li, H.-B. Huo, B. Chen, C.-X. Li, and G.-J. Yang, Formation of Abradable Ceramic Coatings through Deposition of Semi-Molten Ceramic Particles by Flame Spray, Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition, R.S. Lima, A. Agarwal, M.M. Hyland, Y.-C. Lau, C.-J. Li, A. McDonald, and F.-L. Toma, Ed., May 21-24, 2012 (Houston, Texas, USA), ASM International, 2012, p 126-130
76. J.-T. Yao, C.-J. Li, G.-J. Yang, and C.-X. Li, Fabrication of Porous Stainless Steel Through Semi-Molten Spray Particles Deposition by Flame Spraying, Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition, R.S. Lima, A. Agarwal, M.M. Hyland, Y.-C. Lau, C.-J. Li, A. McDonald, and F.-L. Toma, Ed., May 21-24, 2012 (Houston, Texas, USA), ASM International, 2012, p 681-685