A novel plasma-sprayed durable thermal barrier coating with a well-bonded YSZ interlayer between porous YSZ and bond coat

Journal of Thermal Spray Technology

Volumn 21, Issue 3-4, 2012, Pages 383-390

  Li, Chang Jiu ^a   Li, Yong ^a,b   Yang, Guan Jun ^a   Li, Cheng Xin ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

^b XI AN THERMAL POWER RESEARCH INSTITUTE CO   (China)

Author keywords

Atmospheric plasma spray (APS); Cold spray bond coat; Thermal barrier coatings (TBCs); Thermal cyclic properties; Zirconia

Indexed keywords

ATMOSPHERIC PLASMA SPRAY; BOND COATS; COATING SURFACE; CONTROLLED TRANSITIONS; CRACKING PATH; CYCLIC PROPERTY; INDUSTRIAL GAS TURBINES; INTERLAYER THICKNESS; SUPERALLOY BLADES; TOP-COATS;

INORGANIC COATINGS; THERMAL BARRIER COATINGS; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

PLASMA SPRAYING;

EID: 84862820473     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-012-9771-0     Document Type: Conference Paper

References (30)

1. M.S. Ali, S.H. Song, and P. Xiao, Degradation of Thermal Barrier Coatings Due to Thermal Cycling Up to 1150°C, J. Mater. Sci., 2002, 37, p 2097-2102 (Pubitemid 34605887)
2. W.J. Brindley, Thermal Barrier Coatings, J. Therm. Spray Technol., 1996, 5, p 379-380
3. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46, p 505-553 (Pubitemid 32536036)
4. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 12, p 280-284 (Pubitemid 34308457)
5. I. Gurrappa and A. Sambasiva Rao, Thermal Barrier Coatings for Enhanced Efficiency of Gas Turbine Engines, surf. Coat. Technol., 2006, 201, p 3016-3029 (Pubitemid 44780593)
6. C.-J. Li and A. Ohmori, Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits, J. Therm. Spray Technol., 2002, 11, p 365-374 (Pubitemid 35227994)
7. G.-X. Wang, R. Goswami, S. Sampath, and V. Prasad, Understanding the Heat Transfer and Solidification of Plasma-Sprayed Yttria-Partially Stabilized Zirconia Coatings, Mater. Manuf. Process., 2004, 19, p 259-272
8. K.W. Schlichting, N.P. Padture, E.H. Jordan, and M. Gell, Failure Modes in Plasma-Sprayed Thermal Barrier Coatings, Mater. Sci. Eng. A, 2003, A342, p 120-130 (Pubitemid 35442381)
9. J.A. Haynes, M.K. Ferber, W.D. Porter, and E.D. Rigney, Characterization of Alumina Scales Formed During Isothermal and Cyclic oxidation of Plasma-Sprayed TBC Systems at 1150°C, Oxid. Met., 1999, 52, p 31-76
10. Y. Li, C.-J. Li, Q. Zhang, G.-J. Yang, and C.-X. Li, Influence of TGO Composition on the Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-Sprayed MCrAlY Bond Coat, J. Therm. Spray Technol., 2010, 19, p 168-177
11. C.H. Hsueh and E.R. Fuller, Jr., Analytical Modeling of Oxide Thickness Effects on Stresses in Thermal Barrier Coatings, Scr. Mater., 2000, 42, p 781-787
12. D.R. Clarke and W. Pompe, Critical Radius for Interface Separation of a Compressively Stressed Film from a Rough Surface, Acta Mater., 1999, 47, p 1749-1756
13. B.G. Nair, J.P. Singh, and M. Grimsditch, Stress Analysis in Thermal Barrier Coatings Subjected to Long-Term Exposure in Simulated Turbine Conditions, J. Mater. Sci., 2004, 39, p 2043-2051
14. Q.L. Wei, H.B. Guo, and S.K. Gong, Novel Microstructure of EB-PVD Double Ceramic Layered Thermal Barrier Coatings, Thin Solid Films, 2008, 516, p 5736-5739
15. K.V. Niessen, M. Gindrat, and R. Refke, Vapor Phase Deposition Using LPPS Thin Film, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, Ed. B.R. Marple, M.M. Hyland, Y.-C Lau, C.-J. Li, R.S. Lima and G. Montavon, Pub. ASM International, Materials Park, OH, USA, 2009, CD-ROM, 729-736
16. H.B. Guo, R. Vaßen, and D. Stöver, Atmospheric Plasma Sprayed Thick Thermal Barrier Coatings with High Segmentation Crack Density, Surf. Coat. Technol., 2004, 186, p 353-363 (Pubitemid 39033161)
17. H.B. Guo, S. Kuroda, and H. Murakami, Segmented Thermal Barrier Coatings Produced by Atmospheric Plasma Spraying Hollow Powders, Thin Solid Films, 2006, 506-507, p 136-139
18. M. Gell, L.D. Xie, E.H. Jordan, and N.P. Padture, Mechanisms of Spallation of Solution Precursor Plasma Spray Thermal Barrier Coatings, surf. Coat. Technol., 2004, 188-189, p 101-106 (Pubitemid 40318281)
19. L.D. Xie, D.Y. Chen, E.H. Jordan et al., Formation of Vertical Cracks in Solution-Precursor Plasma-Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2006, 201, p 1058-1064 (Pubitemid 44340806)
20. A.D. Jadhav, N.P. Padture, E.H. Jordan, A. Ozturk, F. Wu, X.Q. Ma, B.M. Cetegen, and M. Gell, Low-Thermal-Conductivity Plasma-Sprayed Thermal Barrier Coatings with Engineered Microstructures, Acta Mater., 2006, 54, p 3343-3349 (Pubitemid 43928796)
21. Q. Zhang, C.-J. Li, Y. Li et al., Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured NiCrAlY Bond Coat, J. Therm. Spray Technol., 2008, 17, p 838-845
22. C.-J. Li and W.-Z. Wang, Quantitative Characterization ofLamellar Microstructure of Plasma-Sprayed Ceramic Coatings Through Visualization of Void Distribution, Mater. Sci. Eng. A, 2004, A386, p 10-19 (Pubitemid 39379232)
23. 3 Coatings, Trans. Jpn. Weld. Res. Inst., 1990, 19, p 259-270
24. 3 Coating by Using Copper Electroplating, Thin Solid Films, 1991, 201, p 241-252 (Pubitemid 21698138)
25. Y.Z. Xing, C.-J. Li, Q. Zhang, C.-X. Li, and G.-J. Yang, Influence of Microstructure on the Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits, J. Am. Ceram. Soc., 2008, 91, p 3931-3936
26. D.M. Gray, Y.C. Lau, C.A. Johnson, M.P. Borom, and W.A. Nelson, Thermal Barrier Coatings Having an Improved Columnar Microstructure, U.S. Patent 5,830,586, 1998
27. M.P. Borom, D.M. Gray, and C.A. Johnson, Directionally Solidified Thermal Barrier Coating, U.S. Patent, 5,897,921, 1999
28. M.P. Borom, D.M. Gray, and C.A. Johnson, Directionally Solidified Thermal Barrier Coating, U.S. Patent, 5,989,343, 1999
29. 2 Coatings, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, CD-ROM, B.R. Marple, M.M. Hyland, Y.-C Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed. (Materials Park, OH, USA), ASM International, 2009, p 939-944
30. Y. Li, C.-J. Li, Y.-Z. Xing, G.-J. Yang, and C.-X. Li, Influence of Microstructure on Thermal Conductivity of Plasma-Sprayed YSZ Coating, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, CD-ROM, B.R. Marple, M.M. Hyland, Y.-C Lau, C.-J. Li, R.S. Lima, and G. Montavon (Materials Park, OH, USA), ASM International, 2009,p 51-55