Electropolymerized Films of π-Conjugated Polymers. a Tool for Surface Functionalization: A Brief Historical Evolution and Recent Trends

Electropolymerization: Concepts, Materials and Applications

Volumn , Issue , 2010, Pages 1-26

  Bidan, Gérard ^a  

^a CEA GRENOBLE   (France)

Author keywords

Actuators; Conducting polymers; Conjugated architectures; Electropolymerized films; Functionalization; Metallated structures; Sensors

Indexed keywords

EID: 84885511331     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527630592.ch1     Document Type: Chapter

References (260)

1. Murray, R.W. (1980) Chemically modified electrodes. Acc. Chem. Res., 13, 135-141.
2. Murray, R.W., Ewing, A.G., and Durst, R.A. (1987) Chemically modified electrodes: molecular design for electrocatalysis. Anal. Chem., 59, 379-390.
3. Anson, F.C., Ni, C.-L., and Saveant, J.-M. (1985) Electrocatalysis at redox polymer electrodes with separation of the catalytic and charge propagation roles. Reduction of O2 to H2O2 as Catalyzed by Cobalt(I1) Tetrakis (4-N-methylpyridyl)porphyrin. J. Am. Chem. Soc., 107, 3442-3450.
4. Skotheim, T.A. and Reynolds, J. (eds) (2007) Handbook of Conducting Polymers, vols 1 and 2, 3rd edn, CRC Press.
5. Natta, G., Mazzanti, G., and Corrandini, P. (1958) Atti Accad. Naz. Lincei, 8, 25.
6. Shirakawa, H., Louis, E.J., MacDiarmid, A.G., Chiang, C.K., and Heeger, A.J. (1977) Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x. J. Chem. Soc. Chem. Commun., 578.
7. Chiang, C.K., Fincher, C.R., Park, Y.W., Heeger, A.J., Shirakawa, H., Louis, E.J., Gau, S.C., and MacDiarmid, A.G. (1977) Electrical conductivity in doped polyacetylene. Phys. Rev. Lett., 39, 1098.
8. Hatchett, D.W. and Josowicz, M. (2008) Composites of intrinsically conducting polymers as sensing nanomaterials. Chem. Rev., 108, 746-769.
9. Zhou, Q.-X., Miller, L.L., and Valentine, J.R. (1989) Electrochemically controlled binding and release of protonated dimethyldopamine and other cations from poly(N-methylpyrrole)/polyanion composite redox polymers. J. Electroanal. Chem., 261, 147-164.
10. Ateh, D.D., Navsaria, H.A., and Vadgama, P. (2006) Polypyrrole-based conducting polymers and interactions with biological tissues. J. R. Soc. Interface, 3, 741-752.
11. Fauvarque, J.-P., Petit, M., Pfluger, F., Jutand, A., and Chevrot, C. (1983) Preparation of poly(1,4-phenylene) by nickel(0) complex catalyzed electropolymerization. Makromol. Chem. Rapid Commun., 4, 455-457.
12. Torrance, J. (1979) The difference between metallic and insulating salts of tetracyanoquinodimethane (TCNQ): how to design an organic metal. Acc. Chem. Res., 12, 79-86.
13. -TCNQ to superconducting (TMTSF)2PF6. Chem. Rev., 104, 5565-5591.
14. Walatka, V.V., Labes, M.M., and Perlstein, J.H. (1973) Polysulfurnitride, a one-dimensional chain with a metallic ground state. Phys. Rev. Lett., 31, 1139.
15. Greene, R.L., Street, G.B., and Suter, L.J. (1975) Superconductivity in poly(sulfur nitride) (SN)x. Phys. Rev. Lett., 34, 57.
16. Chiang, G.K., Cohen, M.J., Peebles, D.L., Heeger, A.J., Akhtar, M., Kleppinger, J., MacDiarmid, A.G., Milliken, J., and Moran, M.J. (1977) Transport and optical properties of polythiazyl bromides: (SNBr0.4)x . Solid State. Commun., 23, 607-612.
17. Shirakawa, H. and Ikeda, S. (1971) Infrared spectra of poly(acetylene). Polymer J., 2, 231-244.
18. Chiang, G.K., Druy, M.A., Gau, S.C., Heeger, A.J., Louis, E.J., MacDiarmid, A.G., Park, Y.W., and Shirakawa, H. (1978) Synthesis of highly conductive films of derivatives of polyacetylene, (CH)x. J. Am. Chem. Soc., 100, 1013-1015.
19. Nigrey, P.J., MacDiarmid, A.G., and Heeger, A.J. (1979) Electrochemistry of polyacetylene, (CH)x : electrochemical doping of (CH)x films to the metallic state. J. Chem. Soc., Chem. Commun., 594.
20. Ivory, D.M., Miller, G.G., Sowa, J.M., Shacklette, L.W., Chance, R.R., and Baughman, R.H. (1979) Highly conducting charge-transfer complexes of poly-(p-phenylene). J. Chem. Phys., 71, 1506.
21. Angeli, A. (1916) Sopra i neri di pirrolo. Gazz. Chim. Ital., 46, 279.
22. Pratesi, P. (1937) Sui neri di pirrolo. Gazz. Chim. Ital., 67, 188-207.
23. Messina, R., Sarazin, C., Yu, L.-T., and Buvet, R. (1976) Propriétés de membranes constituées de polyméres semi-conducteurs échangeurs redox: polyaniline et polypyrrole. J. Chim. Phys., 73, 919.
24. de Surville, R., Jozefowicz, M., Yu, L.T., Perichon, J., and Buvet, R. (1968) Electrochemical chains using protolytic organic semiconductors. Electrochim. Acta, 13, 1451.
25. Hautiére Christofini, F. (1973) Préparation et étude des propriétés d'échange et de conductivité en courant continu des produits d'oxydation du pyrrole, Thése de 3i éme cycle de l'Université de Paris 6, 6 mars.
26. Dall'olio, A., Dascola, G., Vacara, V., and Bocchi, V. (1968) Resonance paramagnetique electronique et conductivité d'un noir d'oxypyrrole électrolytique. CR Acad. Sci. C, Paris, 267, 433-435.
27. Diaz, A.F., Castillo, J.I., Logan, J.A., and Lee, W.-Y. (1981) Electrochemistry of conducting polypyrrole films. J. Electrochem. Soc., 129, 115.
28. Diaz, A.F. and Logan, J.A. (1980) Electroactive polyaniline films. J. Electroanal. Chem., 111, 111-114.
29. Geniés, E.M. and Tsintavis, C. (1985) Redox mechanism and electrochemical behaviour or polyaniline deposits. J. Electroanal. Chem., 195, 109-128.
30. Carlin, C.M., Kepley, L.J., and Bard, A.J. (1985) Polymer films on electrodes. XVI. In Situ ellipsometric measurements of polybipyrazine, polyaniline, and polyvinylferrocene films. J. Electrochem. Soc., 132, 353-359.
31. Satoh, M., Kaneto, K., and Yoshino, K. (1985) Electrochemical preparation of high quality poly(p-phenylene) films. J. Chem. Soc., Chem. Commun., 1629.
32. Tourillon, G. and Garnier, F. (1982) New electrochemically generated organic conducting polymers. J. Electroanal. Chem., 135, 173.
33. Kaneto, K., Kohno, Y., Yoshino, K., and Inuishi, Y. (1983) Electrochemical preparation of a metallic polythiophene film. J. Chem. Soc., Chem. Commun., 382-383.
34. Rault-Berthelot, J. and Simonet, J. (1985) The anodic oxidation of fluorene and some of its derivatives. Conditions of the formation of a new conductive polymer. J. Electroanal. Chem., 182, 187.
35. Cattarin, S., Mengoli, G., Musiani, M.M., and Schreck, B. (1988) Synthesis and properties of film electrodes from n-substituted carbazoles in acid medium. J. Electroanal. Chem., 246, 87-100.
36. Bidan, G. (1987) Electrochemical preparation of electroconductive polymers. Mater. Sci. Forum, 21, 21-30.
37. Genoud, F., Guglielmi, M., Nechtschein, M., Geniés, E., and Salmon, M. (1985) ESR study of electrochemical doping in the conducting polymer polypyrrole. Phys. Rev. Lett., 55, 118-121.
38. Geniés, E. and Lapkowski, M. (1987) Spectroelectrochemical study of polyaniline versus potential in equilibrium state. J. Electroanal. Chem., 220, 67.
39. Sariciftci, N.S., Kuzmany, H., Neugebauer, H., and Neckel, A. (1990) Structural and electronic transitions in polyaniline: a Fourier transform infrared spectroscopic study. J. Chem. Phys., 92, 4530-4539.
40. Hamnett, A. and Hillman, A.R. (1988) An ellipsometric study of the nucleation and growth of polythiophene film. J. Electrochem. Soc., 135, 2517-2524.
41. Lang, P., Chao, F., Costa, M., Lheritier, E., and Garnier, F. (1988) Electrochemical grafting of poly-3-methylthiophene on platinum in acetonitrile studied by in situ ellipsometry and electrochemistry. Ber. Bunsen-Ges.: Phys. Chem., 92, 1528-1536.
42. Abrantes, L.M., Correia, J.P., and Jin, G. (2001) The heterogeneous growth of P(3MeTh)-an ellipsometric study. Electrochim. Acta, 46, 3993-3999.
43. Servagent, S. and Vieil, E. (1990) In situ quartz microbalance study of the electrosynthesis of poly(3-methylthiophene). J. Electroanal. Chem., 280, 227-232.
44. Vieil, E., Meerholz, K., Matencio, T., and Heinze, J. (1994) Mass-transfer and convolution. 2. In-situ optical beam deflection study of ionic exchanges between polypolyphenylene films and a 1-1 electrolyte. J. Electroanal. Chem., 368, 183-191.
45. Bidan, G., Blohorn, B., Ehui, B., Lapkowski, M., Kern, J.-M., and Sauvage, J.-P. (1989) Electrochemical behaviour of some hybridized conducting polymers: recent developments. Mater. Sci. Forum, 42, 51-62.
46. Deronzier, A. and Moutet, J.-C. (1989) Functionalized polypyrroles. New molecular materials for electrocatalysis and related applications. Acc. Chem. Res., 22, 249-255.
47. Nylander, C., Armgarth, M., and Lundstrom, I. (1983) An ammonia detector based on a conducting polymer. Anal. Chem. Symp. Ser., 17, 203.
48. Miasik, J., Hooper, A., and Tofield, B. (1986) Conducting polymer gas sensors. J. Chem. Soc., Faraday Trans. I, 82, 1117.
49. Josowicz, M. and Janata, J. (1986) Suspended gate field effect transistor modified with polypyrrole as alcohol sensor. Anal. Chem., 58, 514.
50. Thackeray, J. and Wrighton, M. (1986) Chemically responsive microelectrochemical devices based on platinised poly(3-methyl thiophen): variation in conductivity with variation in hydrogen, oxygen or pH in aqueous solution. J. Phys. Chem., 90, 6674.
51. Gu, H.B., Takiguchi, T., Hayashi, S., Kaneto, K., and Yoshino, K. (1987). Effects of Ammonia Gas on Properties of Poly(p-phenylene vinylene). J. Phys. Soc. Jpn., 56, 3997-4002.
52. Hanawa, T. and Yoneyama, H. (1988) Gas sensitivity of polypyrrole films to NO2. J. Chem. Soc., Faraday Trans. I, 84, 1587.
53. Geniés, E., Hany, P., and Santier, C. (1981) A rechargeable battery of the type polyaniline/propylene carbonate-LiClO4/Li-Al. 18, 751.
54. Nigrey, P., MacInnes, D., Nairns, D., MacDiarmid, A.G., and Heeger, A.J. (1981) Lightweight rechargeable storage batteries using polyacetylene (CH)x as the cathode active materials. J. Electrochem. Soc., 128, 1651.
55. Mastragostino, M., Marinangeli, A., Corradini, A., and Arbizzani, C. (1987) Polythienothiophene as cathode active materials. A comparative study with polythiophene and polydithienothiophene. Electrochim. Acta, 32, 1589.
56. Somasiri, N.L.D. and MacDiarmid, A.G. (1988) Polyaniline: characterization as a cathode active material in rechargeable batteries in aqueous electrolytes. J. Appl. Electrochem., 18, 92-95.
57. Jow, T. and Shacklette, L. (1989) A rechargeable cell based on a conductive polymer/metal alloy composite electrode. J. Electrochem. Soc., 136, 1.
58. Huang, S.-C., Huang, S.-M., Ng, H., and Kaner, R. (1993) Polyaniline capacitors. Synth. Met., 55-57, 4047.
59. Kudoh, Y., Tsuchiya, S., Kojima, T., Fukuyama, M., and Yoshimura, S. (1991) An aluminium solid electrolytic capacitor with an electroconducting-polymer electrolyte. Synth. Met., 41, 1133.
60. Troch-Nagels, G., Winand, R., Weymeeersch, A., and Renard, L. (1992) Electron conducting organic coating of mild stell by electropolymerization. J. Appl. Electrochem., 22, 756.
61. Aeiyach, S., Zaid, B., and Lacaze, P.C. (1999) A one-step electrosynthesis of PPy films on zinc substrates by anodic polymerization of pyrrole in aqueous solution. Electrochim. Acta, 44, 2889-2898.
62. Meneguzzi, A., Ferreira, C.A., Pham, M.C., Delamar, M., and Lacaze, P.C. (1999) Electrochemical synthesis and characterization of poly(5-amino-1-naphthol) on mild steel electrodes for corrosion protection. Electrochim. Acta, 44, 2149-2156.
63. Fan, F.-R., Wheeler, B., Bard, A.J., and Noufi, R. (1981) Semiconductor electrodes. XXXIX. Techniques for in aqueous solution photo-electrochemical cells. J. Electrochem. Soc., 128, 2043.
64. Skotheim, T., Lunstrom, I., and Prejza, J. (1981) Stabilization of n-Si photoanodes to surface corrosion in aqueous electrolyte with a thin film of polypyrrole. J. Electrochem. Soc., 128, 1625.
65. Frank, A. (1982) Photoelectrochemical solar cells: stabilisation of small band gap semiconductor in aqueous solution by surface-attached organic conducting polymer. Mol. Cryst. Liq. Cryst., 83, 341.
66. Simon, R., Ricco, A., and Wrighton, M. (1982) Synthesis and characterization of a new surface derivatizing reagent to promote the adhesion of polypyrrole films to n-type silicon photoanodes: N-(3-(trimethoxysilyl)propyl)pyrrole. J. Am. Chem. Soc., 104, 2031.
67. Dyer, A.L. and Reynolds, J.R. (2007) in Handbook of Conducting Polymers, vol. 1, (eds T.A. Skotheim and J. Reynolds), Chapter 20, 3rd edn, CRC Press, pp. 1-63.
68. Colaneri, N., Kobayashi, M., Heeger, A., and Wudl, F. (1986) Electrochemical and optoelectrochemical properties of poly-(isothianaphtene). Synth. Met., 14, 45.
69. Gazard, M. (1986) in Handbook of Conducting Polymers (eds T. Skotheim et al.), vol. 1, M. Dekko, Inc., New York, p. 673.
70. Kaneto, K., Agawa, H., and Yoshino, K. (1987) Cycle life, stability and characteristics of color switching cells utilizing polythiophene films. J. Appl. Phys., 61, 1197.
71. Audebert, A., Bidan, G., Lapkowski, M., and Limosin, D. (1987) in Electronic Properties of Conjugated Polymers, Springer Series in solid State Sciences, vol. 76, Proceedings of an International Winter School, March 14-21, Kichberg, Tirol (ed. H. Kuzmany), Springer, Berlin, pp. 366-384.
72. Shimidzu, T. (1989) Derivatization of conducting polymers with functional molecules directed via molecular structural control towards a molecular device. React. Polym., 11, 177-189.
73. Garnier, F. (1989) Functionalized conducting polymers-towards intelligent materials. Angew. Chem. Int. Ed. Engl., 28, 513-517.
74. Roncali, J. (1992) Conjugated poly(thiophenes): synthesis, functionalization, and applications. Chem. Rev., 92, 711-738.
75. Yamamoto, T., Sanechika, K., and Yamamoto, A. (1980) Preparation of thermostable and electric-conducting poly(2,5-thienylene). J. Polym. Sci.: Polym. Lett. Ed., 18, 9-12.
76. Rasmussen, S.C. and Pomerantz, M. (2007) in Handbook of Conducting Polymers, vol. 1, 3rd edn (eds T.A. Skotheim and J. Reynolds), Chapter 12, CRC Press, pp. 1-34.
77. Ajayaghosh, A. (2003) Donor-acceptor type low band gap polymers: polysquaraines and related systems. Chem. Soc. Rev., 32, 181-191.
78. Wudl, F., Kobayashi, M., and Heeger, A.J. (1984) Poly(isothianathene). J. Org. Chem., 49, 3382.
79. Danieli, R., Taliani, C., Zamboni, R., Giro, G., Biserni, M., Mastragostino, M., and Testoni, A. (1986) Optical, electrical and electrochemical characterization of electrosynthetized polythieno(3,2-B)thiophene. Synth. Met., 13, 325-328.
80. Bolognesi, A., Catelanni, M., Destri, S., Zamboni, R., and Taliani, C. (1988) Poly(dithieno[3,4-b:3,4-d]thiophene): a new transparent conducting polymer. J. Chem. Soc., Chem. Commun., 246-247.
81. Roncali, J. (1997) Synthetic principles for bandgap control in linear p-conjugated systems. Chem. Rev., 97, 273.
82. Dietrich, M., Heinze, J., Heywang, G., and Jonas, F. (1994) Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenes. J. Electroanal. Chem., 369, 87.
83. Sotzing, G.A., Reynolds, J.R., and Steel, P.J. (1996) Electrochromic conducting polymers via electrochemical polymerization of Bis(2-(3,4 ethylenedioxy) thienyl) monomers. Chem. Mater., 8, 882-889.
84. Jen, K.-Y., Miller, G.G., and Elsenbaumer, R.L. (1986) Highly conducting, soluble and environmentally-stable poly(3-alkylthiophenes). J. Chem. Soc. Chem. Commun., 1246-1347.
85. McCullough, R.D., Lowe, R.D., Jayaraman, M., and Anderson, D.L. (1993) Design, synthesis, and control of conducting polymer architectures-structurally homogeneous poly(3-alkylthiophenes). J. Org. Chem., 58, 904-912.
86. Jeffries-El, M. and McCullough, R.D. (2007) in Handbook of Conducting Polymers, vol. 1, 3rd edn (eds T.A. Skotheim and J. Reynolds), Chapter 9, pp. 9-1-9-39, CRC Press.
87. Skotheim, T.A. and Reynolds, J. (eds) (2007) Processing of conducting polymers, Handbook of Conducting Polymers, 3rd edn, vol. 2, Chapters 1-4, pp. 1-3-1-23, 2-1-2-63, 3-1-3-20, 4-1-4-24, CRC Press.
88. Trouillet, L., De Nicola, A., and Guillerez, S. (2000) Synthesis and characterization of a new soluble, structurally well-defined conjugated polymer alternating regioregularly alkylated thiophene oligomer and 2,2-bipyridine units: metal-free form and Ru(II) complex. Chem. Mater., 12, 1611-1621.
89. Garnier, F., Horowitz, G., and Fichou, D. (1989) Conjugated polymers and oligomers as active material for electronic devices. Synth. Met., 28, 705-714.
90. Mishra, A., Ma, C.-Q., and Bäuerle, P. (2009) Functional oligothiophenes: molecular design for multidimensional nanoarchitectures and their applications. Chem. Rev., 109, 1141-1276.
91. Burroughes, J., Bradley, D., Brown, A., Marks, R., Mackay, K., Friend, R., Burns, P., and Holmes, A. (1990) light emitting diodes based on conjugated polymers. Nature, 347, 539.
92. Perepichka, I.F., Perepichka, D.F., Meng, H., and Wudl, F. (2005) Light-emitting polythiophenes. Adv. Mater., 17, 2281-2305.
93. Brabec, C.J., Sariciftci, N.S., and Hummelen, J.C. (2001) Recent developments in conjugated-polymer-based photovoltaic elements. Adv. Funct. Mater., 11, 15-26.
94. Sariciftci, N.S., Smilowitz, L., Heeger, A.J., and Wudl, F. (1992) Photoinduced electron transfer from a conducting polymer to buckminsterfullerene. Science, 258, 1474-1476.
95. Morita, S., Zakhidov, A.A., and Yoshino, K. (1992) Doping effect of buckminsterfullerene in conducting polymer: change of absorption spectrum and quenching of luminescence. Solid State Commun., 82, 249-252.
96. Iwasaki, K., Kimoto, A., Naya, S.-I., Iwahori, F., and Abe, J. (2009) Synthesis and properties of optically functionalized polythiophene having porphyrin side-chain. Synth. Met., 159, 880-884.
97. Akiyama, T., Fukuyama, T., Sugawa, K., Yoneda, H., and Yamada, S. (2009) Photocurrent generation properties of electrochemically polymerized terthiophene-linked fullerene film. Synth. Met., 159, 965-968.
98. Hergu, N., Mallet, C., Frére, P., Allain, M., and Roncali, J. (2009) Electrogenerated low band gap polymers based on the 3-Cyano-4-methoxythiophene building block. Macromolecules, 42, 5593-5599.
99. Sakmeche, N., Bazzaoui, E.A., Fall, M., Aeiyach, S., Jouini, M., Lacroix, J.C., Aaron, J.J., and Lacaze, P.C. (1997) Application of sodium dodecylsulfate (SDS) micellar solution as an organized medium for electropolymerization of thiophene derivatives in water. Synth. Met., 84, 191-192.
100. Tamburri, E., Orlanducci, S., Toshi, F., Terranova, M.L., and Passeri, D. (2009) Growth mechanisms, morphology, and electroactivity of PEDOT layers produced by electrochemical routes in aqueous medium. Synth. Met., 159, 406-414, and references therein.
101. Kone, A., Dieng, M.M., Aaron, J.J., Lazerges, M., Jouini, M., Aeiyach, S., and Lacaze, P.C. (2005) AOT reverse micelle, a new organized medium for the electrosynthesis of polyaromatic hydrocarbons; application to the electropolymerization of biphenyl. Synth. Met., 150, 227-239.
102. Diaz, A.F., Kanazawa, K.K., and Gardini, G.G. (1979) Electrochemical polymerization of pyrrole. J. Chem. Soc., Chem. Commun., 635-636.
103. Street, G.B. and Clarke, T.C. (1981) Conducting polymers: a review of recent works. IBM J. Res. Develop., 25, 51-57.
104. Tourillon, G. and Garnier, F. (1984) Morphology of organic conducting polymers-polythiophene and poly(3-methyl thiophene). J. Polym. Sci., Part B: Polym. Phys., 22, 33-39.
105. Waltman, R.J., Diaz, A.F., and Bargon, J. (1984) Electroactive properties of polyaromatic molecules. J. Electrochem. Soc., 131, 1452-1456.
106. Taoudi, H., Bernede, J.C., Del Valle, M.A., Bonnet, A., Molinie, P., Morsli, M., Diaz, F., Tregouet, Y., and Bareau, A. (2000) Polycarbazole obtained by electrochemical polymerization of monomers either in solution or in thin film form. J. Appl. Electrochem., 75, 1561-1568.
107. Clergereaux, R., Séguy, I., Jolinat, P., Farenc, J., and Destruel, P. (2000) Electronic conduction in electropolymerized carbazole thin films. J. Phys. D: Appl. Phys., 33, 1947-1952.
108. Ates, M., Castillo, J., Sezai Sarac, A., and Schuhmann, W. (2008) Carbon fiber microelectrodes electrocoated with polycarbazole and poly(carbazole-co-p-tolylsulfonyl pyrrole) films for the detection of dopamine in presence of ascorbic acid. Microchim. Acta, 160, 247-251.
109. Simonet, J. and Rault-Berthelot, J. (1991) Electrochemistry: a technique to form, to modify and to characterize organic conducting polymers. Prog. Solid State Chem., 21, 1-48, and references therein.
110. Aydemir, K., Tarkuc, S., Durmus, A., Gunbas, G.E., and Toppare, L. (2008) Synthesis, characterization and electrochromic properties of a near infrared active conducting polymer of 1,4-di(selenophen-2-yl)-benzene. Polymer, 49, 2029-2032.
111. Sankaran, B. and Reynolds, J.R. (1997) High-contrast electrochromic polymers from alkyl-derivatized poly(3,4-ethylenedioxythiophenes). Macromolecules, 30, 2582-2588.
112. MacDiarmid, A.G., Chiang, J.C., Halpern, M., Huang, W.S., Mu, S.L., Somarisi, N.L.D., Wu, W.Q., and Yaniger, S.I. (1985) Polyaniline-interconversion of metallic and insulating forms. Mol. Cryst. Liq. Cryst., 121, 173-180.
113. Geniés, E.M., Lapkowski, M., and Penneau, J.F. (1988) Cyclic voltammetry of polyaniline: interpretation of the middle peak. J. Electroanal. Chem., 249, 97-107.
114. MacDiarmid, A.G., Chiang, J.C., Halpern, M., Huang, W.S., Somarisi, N.L.D., Wu, W.Q., and Yaniger, S.I. (1984) Polyaniline-A cathode active materials for rechargeable aqueous batteries. J. Electrochem. Soc., 131, C328.
115. Wessling, B. (1993) Dissipative structure formation in colloidal systems. Adv. Mater., 5, 300.
116. Bidan, G., Geniés, E., and Penneau, J.F. (1989) Poly(2-propylaniline) : an electroactive polymer soluble in organic medium in the reduced state. J. Electroanal. Chem., 271, 59.
117. Blomquist, M., Lindforsa, T., Latonena, R.-M., and Bobacka, J. (2009) Electropolymerization of N-methylanthranilic acid and spectroelectrochemical characterization of the formed film. Synth. Met., 159, 96-102.
118. Shimidzu, T. (1987) Functionalized conducting polymers for development of new polymeric reagents. Reactive Polym., 6, 221.
119. Miller, L., Zinger, B., and Zhou, Q.-Z. (1987) Electrically controlled release of Fe(CN)4-6 on polypyrrole. J. Am. Chem. Soc., 109, 2267-2272.
120. Li, Y.J. and Dong, S.J. (1992) Electrochemically controlled release of adenosine 5-triphosphate from polypyrrole film. J. Chem. Soc., Chem. Commun., 827-828.
121. Pernaut, J.-M. and Reynolds, J.R. (2000) Use of conducting electroactive polymers for drug delivery and sensing of bioactive molecules. A redox chemistry approach. J. Phys. Chem. B, 104, 4080-4090.
122. Coche-Guerente, L., Deronzier, A., Galland, B., Labbe, P., Moutet, J.-C., and Reverdy, G. (1991) Immobilization of redox anions in poly(amphiphilic pyrrolylalkylammonium) using a simple and monomer saving one-step procedure in pure water electrolyte. J. Chem. Soc., Chem. Commun., 386.
123. Cosnier, S. and Innocent, C. (1992) A novel biosensor elaboration by electropolymerization of an adsorbed amphiphilic pyrrole-tyrosinase layer. J. Electroanal. Chem., 328, 361.
124. Bull, R., Fan, F.-R., and Bard, A. (1984) Polymer films on electrodes. 13. Incorporation of catalyst into electronically conductive polymers: iron phthalocyanines in polypyrrole. J. Electrochem. Soc., 131, 687-690.
125. Skotheim, T., Rosenthal, M.V., and Linkous, C.A. (1985) Polypyrrole complexed with cobalt phthalocyanine-A conducting polymer which is stable to air and moisture. J. Chem. Soc., Chem. Commun., 612-613.
126. Elzing, A., Van Der Putten, A., Visscher, W., and Barendrecht, E. (1987) The mechanism of oxygen reduction at iron tetrasulfonato-phthalocyanine incorporated in polypyrrole. J. Electroanal. Chem., 233, 113.
127. Choi, C. and Tachikawa, H. (1990) Electrochemical behaviour and characterization of polypyrrole-copper phthalocyanine tetrasulfonate thin film: cyclic voltammetry and ''in situ'' Raman spectroscopic investigation. J. Am. Chem. Soc., 112, 1757.
128. Bidan, G., Geniés, E., and Lapkowski, M. (1989) One step electrochemical immobilization of keggin-type heteropolyanions in poly (3-methylthiophene) film at an electrode surface: electrochemical and electrocatalytic properties. Synth. Met., 31, 327.
129. Dong, S.J. and Jin, W. (1993) Study of a 1/12 phosphomolybdic anion doped polypyrrole film electrode and its electrocatalysis. J. Electroanal. Chem., 354, 87-97.
130. Umana, M. and Waller, J. (1986) Protein-modified electrodes. The glucose oxidase/polypyrrole system. Anal. Chem., 58, 2979.
131. Foulds, N. and Lowe, C. (1986) Enzyme entrapment in electrically conducting polymers: immobilization of glucose oxidase-polypyrrole and its application in amperometric glucose sensors. J. Chem. Soc. Faraday Trans. 1, 82, 1259.
132. Bartlett, P. and Whitaker, G. (1987) Electrochemical immobilization of enzymes. Part II: glucose oxidase immobilized in poly-N-methylpyrrole. J. Electroanal. Chem., 224, 37.
133. Wang, J., Jiang, M., and Mukherjee, B. (1999) Flow detection of nucleic acids at a conducting polymer-modified electrode. Anal. Chem., 71, 4095-4099.
134. Wang, J. (1999) Towards genoelectronics: electrochemical biosensing of DNA hybridization. Chem. Eur. J., 5, 1681-1685.
135. Shimidzu, T., Ohtani, A., and Honda, K. (1988) Dual-mode behaviour in doping-undoping of polypyrrole with alkanesulfonate. Bull. Soc. Jap., 61, 2885.
136. 4 Electrochim. Acta, 53, 3836-3843.
137. Bidan, G., Ehui, B., and Lapkowski, M. (1988) Conductive polymers with immobilized dopants: ionomer composites and auto-doped polymers-A review and recent advances. J. Phys. D: Appl. Phys., 21, 1043.
138. Reynolds, J., Sundaresan, N., Pomerantz, M., Basak, S., and Baker, C. (1988) Self doped conducting polymers: a charge and mass transport study of poly[pyrrole-Co(3-pyrrole-1-yl)propanesulfonate)]. J. Electroanal. Chem., 250, 355.
139. -doped conducting polymers: verification of the ''cation-popping'' doping mechanism. Synth. Met., 30, 305.
140. -doped 3-substituted polypyrrole. Chem. Mat., 1, 650.
141. Ren, X. and Pickup, P. (1992) Ionic and electronic conductivity of poly-(3-methylpyrrole-4-carboxylic acid). J. Electrochem. Soc., 139, 2097.
142. Bauerle, P., Gaudl, K., Wurthner, F., Sariciftci, S., Neugebauer, H., Mehring, M., Zhong, C.J., and Doblhofer, K. (1990) Thiophene 3. Communication synthesis and properties of carboxy-functionalized poly(3-alkylthienylenes). Adv. Mater., 2, 490-494.
143. Lopez, C., Mendes Viegas, M.-F., Bidan, G., and Vieil, E. (1994) Comparison of ion exchange properties of polypyrrole with and without immobilized dopants by optical beam deflection. Synth. Met., 63, 73-78.
144. Penner, R. and Martin, C. (1986) Electronically conductive polymer membranes. J. Electrochem. Soc., 133, 311.
145. Bidan, G. and Ehui, B. (1989) One-step electrosynthesis and characterization of poly(aniline)-Nafion and poly(3-methylthiophene)-Nafion composite film. J. Chem. Soc., Chem. Commun., 1568.
146. Bates, N., Cross, M., Lines, R., and Walton, D. (1985) Flexible and heat processable conductive films of polypyrrole. J. Chem. Soc., Chem. Commun., 871.
147. Zhong, C. and Doblhofer, K. (1990) Polypyrrole-based electrode coatings switchable electrochemically between the anion- and cation-exchanger states. Electrochim. Acta, 35, 1971-1976.
148. Miller, L. and Zhou, Q.-X. (1987) Poly(N-methylpyrrolylium) poly(styrenesulfonate): a conductive electrically switchable cation exchanger that cathodically bind and anodically releases dopamine. Macromolecules, 20, 1594.
149. Bidan, G., Gadelle, A., Lopez, C., Mendes Viegas, M.-F., and Vieil, E. (1994) Incorporation of sulfonated cyclodextrins into polypyrrole : an approach for the electrocontrolled delivering of neutral drugs. Biosens. Bioelectron., 9, 219.
150. Kaneto, K. and Bidan, G. (1998) Electrochemical recognition and immobilization of uranyl ions by polypyrrole film doped with calix[6]arenes. Thin Solids Films, 331, 272-278.
151. Velazquez-Rosenthal, M., Skotheim, T., and Warren, J. (1985) Ferrocene-functionalized polypyrrole films. J. Chem. Soc., Chem. Commun., 342-343.
152. Godillot, P., Korri-Youssoufi, H., Srivastava, P., El Kassmi, A., and Gamier, F. (1996) Direct chemical functionalization of as-grown electroactive polypyrrole film containing leaving groups. Synth. Met., 33, 117-123.
153. Cosnier, S., Galland, B., Gondran, C., and Le Pellec, A. (1998) Electrogeneration of biotinylated functionalized polypyrroles for the simple immobilization of enzymes. Electroanalysis, 10, 808-813.
154. Dupont-Filliard, A., Billon, M., Livache, T., and Guillerez, S. (2004) Biotin/avidin system for the generation of fully renewable DNA sensor based on biotinylated polypyrrole film. Anal. Chim. Acta, 515, 271-277.
155. Garnier, F., Korri-Youssoufi, H., Srivastava, P., Mandrand, B., and Delair, T. (1999) Toward intelligent polymers: DNA sensors based on oligonucleotides-functionalized polypyrroles. Synth. Met., 100, 89-94.
156. Peng, H., Soeller, C., and Travas-Sejdic, J. (2007) Novel conducting polymers for DNA sensing. Macromolecules, 40, 909-914.
157. Li, Y., Zhang, W., Chang, J., Chen, J., Li, G., and Ju, Y. (2008) ''Click'' on conducting polymer coated electrode: a versatile platform to the modification of electrode surfaces. Macromol. Chem. Phys., 209, 322-329.
158. Diaz, A.F., Castillo, J., Kanazawa, K.K., Logan, J.A., Salmon, M., and Fajardo, O. (1982) Conducting poly-N-alkylpyrrole polymer films. J. Electroanal. Chem., 133, 233-239.
159. Salmon, M., Carbajal, M.E., Juérez, J.C., Diaz, A., and Rock, M.C. (1984) Substituent effect on para-substituted N-phenylpyrrole monomers and their polyheterocyclic conductors. J. Electrochem. Soc., 131, 1802-1804.
160. Velazquez-Rosenthal, M., Skotheim, T., Melo, A., and Flort, M. (1985) Electrochemical synthesis of polypyrrole/poly-N-(p-nitrophenyl) pyrrole co-polymer. J. Electroanal. Chem., 185, 297.
161. Bidan, G. and Guglielmi, M. (1986) Electrochemical characteristics of some N-(hydroxyalkyl) and N-(tosylalkyl)pyrroles; electrochemical behaviour of the corresponding polymers. Synth. Met., 15, 49-58.
162. Bidan, G., Divisia-Blohorn, B., Lakkowski, M., Kern, J.-M., and Sauvage, J.-P. (1992) Electroactive film of polypyrroles containing complexing cavities preformed by entwining ligands on metallic centers. J. Am. Chem. Soc., 114, 5986-5994.
163. Bidan, G., Deronzier, A., and Moutet, J.C. (1984) Electrochemical coating of an electrode by a poly(pyrrole) film containing the viologen (4,4-bipyridinium) system. J. Chem. Soc., Chem. Commun., 1185-1186.
164. Lapkowski, M. and Bidan, G. (1993) Electrochemical, spectroelectrochemical and EPR properties of poly(pyrrole-viologens). J. Electroanal. Chem., 362, 249-256.
165. Bidan, G., Deronzier, A., and Moutet, J.C. (1984) Redox polymeric film electrode by electropolymerization of a pyrrole-containing complex of ruthenium( II). Nouv. J. Chem., 8, 501-503.
166. Deronzier, A. and Moutet, J.-C. (1996) Polypyrrole films containing metal complexes: syntheses and applications. Coord. Chem. Rev., 147, 339-371.
167. Bidan, G. (1985) Functionalization of pyrrole conducting polymer: application in preparing modified electrodes. Spring Meeting Electrochemical Society, May 12-17, Abstr. 73, Toronto, pp. 105-106.
168. Bidan, G. and Limosin, D. (1986) Electrochemical synthesis and behaviour of a polypyrrole film containing a nitroxide group. Ann. Phys., 11, 5-16.
169. Audebert, P., Bidan, G., and Lapkowski, M. (1987) Behaviour of some poly(pyrrole-anthraquinone) films in DMSO electrolyte. J. Electroanal. Chem., 219, 165-181.
170. Salmon, M. and Bidan, G. (1985) Chiral polypyrrole films from optically active pyrrole monomers. J. Electrochem. Soc., 132, 1897-1899.
171. Bedioui, F., Bongars, C., and Devynck, J. (1986) Metalloporphyrin-polypyrrole film electrode: characterization and catalytic application. J. Electroanal. Chem., 207, 87.
172. Deronzier, A., Essakali, M., and Moutet, J.C. (1987) Poly(pyrrole-phenothiazine) modified electrodes-application as photoelectrodes via a charge transfer complex. J. Chem. Soc., Chem. Commun., 773-775.
173. Yon-Lin, B., Smolander, M., Cromton, T., and Lowe, C. (1993) Covalent electropolymerization of glucose oxydase in polypyrrole. Evaluation of methods of pyrrole attachment to glucose oxidase on the performance of electropolymerized glucose sensors. Anal. Chem., 65, 2067.
174. Buffenoir, A., Bidan, G., Chalumeau, L., and Soury-Lavergne, I. (1998) Immobilisation at an electrode of calix[4]arenes bearing electropolymerisable pyrrole moieties at the upper ring. J. Electroanal. Chem., 451, 261-266.
175. Rault-Berthelot, J., Massaoudi, M., and Rozé, C. (1995) Anodic oxidation of the 1-(pyrrol-1-yl)-5-(fluoren-9-yl)-3-oxapentane: synthesis of a conducting poly(pyrrole-fluorene). J. Electroanal. Chem., 388, 187-193.
176. Cosnier, S. (2000) Biosensors based on immobilization of biomolecules by electrogenerated polymer films. Appl. Biochem. Biotechnol., 89, 127-137, and references therein.
177. Bidan, G., Billon, B., Galasso, K., Livache, T., Mathis, G., Roget, A., Torres-Rodriguez, L.-M., and Vieil, E. (2000) Electropolymerization as a versatile route for immobilizing biological species onto surface. Appl. Biochem. Biotechnol., 89, 183-193, and references therein.
178. Bidan, G. (1992) Electroconducting conjugated polymers: new sensitive matrices to build up chemical or electrochemical sensors. A review. Sens. Actuators, B, 6, 45-56, and references therein.
179. Audebert, P. and Andrieux, C. (1989) First electrochemical study of a modified electrode obtained from a 3-functionalized pyrrole derivative. J. Electroanal. Chem., 261, 443-448.
180. Lemaire, M., Garreau, R., Roncali, J., Delabouglise, D., Korri-Youssoufi, H., and Garnier, F. (1989) Design of poly(thiophene) containing oxyalkyl substituents. New J. Chem., 13, 863-871.
181. Roncali, J., Garreau, R., Yassar, A., Marque, P., Garnier, F., and Lemaire, M. (1987) Effects of steric factors on the electrosynthesis and properties of conducting poly(3-alkylthiophenes). J. Phys. Chem., 91, 6706-6714.
182. Roncali, J., Garreau, R., Delabouglise, D., Garnier, F., and Lemaire, M. (1989) A molecular approach of poly(thiophene) functionalisation. Synth. Met., 28, C341-C348.
183. B̈auerle, P. and Gaudl, K.-U. (1991) New functionalized polythiophenes. Synth. Met., 13, 3037-3042.
184. Youssoufi, H.-K., Yassar, A., Baiteche, S., and Garnier, F. (1994) Designing polypyrrole-based sensors-selective electrochemical cation in aza-crown ethers. Synth. Met., 67, 251-254.
185. Mishra, A., Ma, C.-Q., and B̈auerle, P. (2009) Functional oligothiophenes: Molecular design for multidimensional nanoarchitectures and their applications. Chem. Rev., 109, 1141-1276, and references therein.
186. Bauerle, P. and Scheib, S. (1993) Molecular recognition of alkali-ions by crown-ether functionalized poly(alkylthiophenes). Adv. Mater., 5, 848-853.
187. Roncali, J. (1992) Conjugated polythiophenes): synthesis, functionalization, and applications. Chem. Soc. Rev., 92, 711-738, and references therein.
188. McQuade, T., Pullen, A., and Swager, T. (2000) Conjugated polymer-based chemical sensors. Chem. Rev., 100, 2537-2574.
189. - with a boronic ester-functionalized polypyrrole. J. Electroanal. Chem., 509, 73-79.
190. Garnier, F., Korri-Youssoufi, H., Srivastava, P., and Yassar, A. (1994) Enzyme recognition by polypyrrole functionalized with bioactive peptides. J. Am. Chem. Soc., 116, 8813-8814.
191. Bettelheim, A., White, A., Raybuck, S., and Murray, R. (1987) Electrochemical polymerization of amino-, pyrrole-, and hydroxy-substituted tetraphenylporphyrins. Inorg. Chem., 26, 1009-1017.
192. Huang, S.-S., Tang, H., and Li, B.-F. (1998) Electrochemistry of electropolymerized tetra (p-aminophenyl)porphyrin nickel film electrode and catalytic oxidation of acetaminophen. Mikrochim. Acta, 128, 37-42.
193. Badawy, W.M., Ismail, K., and Medany, S. (2006) Optimization of the electropolymerization of 1-amino-9,10-anthraquinone conducting films from aqueous media. Electrochim. Acta, 51, 6353-6360.
194. Meneguzzi, A., Ferreira, C.A., Pham, M.C., Delamar, M., and Lacaze, P.-C. (1999) Electrochemical synthesis and characterization of poly(5-amino-1-naphthol) on mild steel electrodes for corrosion protection. Electrochim. Acta, 44, 2149-2156.
195. Acevedo, D.F., Reisberg, S., Piro, B., Peralta, D.O., Miras, M.C., Pham, M.-C., and Barbero, C.A. (2008) Fabrication of an interpenetrated network of carbon nanotubes and electroactive polymers to be used in oligonucletide biosensing. Electrochim. Acta, 53, 4001-4006.
196. Bidan, G., Divisia-Blohorn, B., Billon, M., Kern, J.-M., and Sauvage, J.-P. (1993) Tangled 3-functionalized polypyrrole derivatives built around Cu(dpp)+ 2 (dpp = 2,9-diphenyl-1,10-phenanthroline). J. Electroanal. Chem., 360, 189.
197. Bidan, G., Billon, M., Divisia-Blohorn, B., Kern, J.-M., Raehm, L., and Sauvage, J.-P. (1998) Electrode-deposited films of polyrotaxanes : electrochemically induced gliding motion. New J. Chem., 22, 1139-1141.
198. Ikeda, T., Higuchi, M., and Kurth, D. (2009) From thiophene [2]rotaxane to polythiophene polyrotaxane. J. Am. Chem. Soc., 131, 9158-9159.
199. Goldenberg, L., Bryce, M., and Petty, M. (1999) Chemosensor devices: voltammetric molecular recognition at solid interfaces. J. Mater. Chem., 9, 1957-1974.
200. McQuade, T., Pullen, A., and Swager, T. (2000) Conjugated polymer-based chemical sensors. Chem. Rev., 100, 2537-2574.
201. Bidan, G. (1992) Electroconducting conjugated polymers: new sensitive matrices to build up chemical or electrochemical sensors. A review. Sens. Actuators, B, 6, 45-56.
202. Cosnier, S. (2000) Biosensors based on immobilization of biomolecules by electrogenerated polymer films. Appl. Biochem. Biotechol., 89, 127-138.
203. Barisci, J., Wallace, G., Andrews, M., Partridge, A., and Harris, P. (2002) Conducting polymer sensors for monitoring aromatic hydrocarbons using an electronic nose. Sens. Actuators. B, 84, 252-257.
204. Lange, U., Roznyatouskaya, N., and Mirsky, V. (2008) Conducting polymers in chemical sensors and arrays. Anal. Chem. Acta, 614, 1-26.
205. Bobacka, J., Ivaska, A., and Lewenstam, A. (2008) Potentiometric ion sensors. Chem. Rev., 108, 329-351.
206. Hatchett, D. and Josowicz, M. (2008) Composites of intrinsically conducting polymers as sensing nanomaterials. Chem. Rev., 108, 746-769.
207. Singh, R. and Choi, J.-W. (2009) Biosensors development based on potential target of conducting polymers. Sens. Transduc. J., 104, 1-18, and references therein.
208. Renaud Demadrille, R., Zagorska, M., Billon, M., Louarn, G., Lefrant, S., and Pron, A. (2007) Solution versus solid-state electropolymerization of regioregular conjugated fluorenone-thienylene vinylene macromonomers-voltammetric and spectroelectrochemical investigations. J Solid State Electrochem., 11, 1051-1058.
209. Roncali, J., Blanchard, P., and Frère, P. (2005) 3,4-Ethylenedioxythiophene (EDOT) as a versatile building block for advanced functional p-conjugated systems. J. Mater. Chem., 15, 1589-1610.
210. Sotzing, G. and Reynolds, J. (1996) Electrochromic conducting polymers via electrochemical polymerization of bis(2-(3,4-ethylenedioxy)thienyl) monomers. Chem. Mater., 8, 882-889.
211. Audebert, P., Sadki, S., Miomandre, F., and Clavier, G. (2004) First example of an electroactive polymer issued from an oligothiophene substituted tetrazine. Electrochem. Commun., 6, 144-147.
212. Pickup, P. (1999) Conjugated metallopolymers. Redox polymers with interacting metal based redox sites. J. Mater. Chem., 9, 1641-1653.
213. Wolf, M. (2001) Transition-metalpolythiophene based hybrid materials. Adv. Mater., 13, 545-553.
214. Kern, J.-M., Sauvage, J.-P., Bidan, G., and Divisia-Blohorn, B. (2003) Transition-metal-templated synthesis of rotaxanes and catenanes: from small molecules to polymers. J. Polym. Sci.: Part A: Polym. Chem., 41, 3470-3477.
215. Hmyene, M., Yassar, A., Escorne, M., Percheron-Guegan, A., and Garnier, F. (1994) Magnetic properties of ferrocene-based conjugated polymers. Adv. Mater., 6, 564-568.
216. Shimidzu, T., Segawa, H., Wu, F., and Nakayama, N. (1995) Approaches to conducting polymer devices with nanostructures: photoelectrochemical function of one-dimensional and two-dimensional porphyrin polymers with oligothienyl molecular wire. J. Photochem. Photobiol. A: Chem., 92, 121-127.
217. Harriman, A. and Ziessel, R. (1998) Building photoactive molecular-scale wires. Coord. Chem. Rev., 171, 331-339.
218. Yamamoto, T., Maruyama, T., Zhou, Z.-H., Ito, T., Fukuda, T., Yoneda, Y., Begum, F., Ikeda, T., Sasaki, S., Takezoe, H., Fukuda, A., and Kubotall, K. (1994) p-conjugated poly(pyridine-2,5-diyl), poly(2,2-bipyridine-5,5-diyl), and their alkyl derivatives. Preparation, linear structure, function as a ligand to form their transition metal complexes, catalytic reactions, n-type electrically conducting properties, optical properties, and alignment on substrates. J. Am. Chem. Soc., 116, 4832-4845.
219. Wolf, M. and Wrighton, M. (1994) Tunable electron density at a rhenium carbonyl complex coordinated to the conducting polymer poly [5,5-(2-thienyl)-2,2-bithiazole]. Chem. Mat., 6, 1526-1533.
220. Zotti, G., Zecchin, S., and Schiavon, G. (1995) Conductivity in redox modified conducting polymers.2. Enhanced redox conductivity in ferrocene-substituted polypyrroles and polythiophenes. Chem. Mater., 7, 2309-2315.
221. Zhu, S. and Swager, T. (1996) Design of conducting redox polymers: a polythiophene- Ru(bipy)3 n+ hybrid material. Adv. Mater., 8, 497-500.
222. Zhu, S. and Swager, T. (1997) Conducting polymetallorotaxanes: metal ion mediated enhancements in conductivity and charge localization. J. Am. Chem. Soc, 119, 12568-12577.
223. Vidal, P.-L., Billon, M., Divisia-Blohorn, B., Bidan, G., Kern, J.-M., and Sauvage, J.-P. (1998) p-conjugated polyrotaxanes containing coordinating units: reversible copper (I) metallation-demetallation using lithium as intermediate scaffolding. Chem. Commun., 629-630.
224. Vidal, P.-L., Divisia-Blohorn, B., Bidan, G., Hazemann, J.-L., Kern, J.-M., and Sauvage, J.-P. (2000) p-conjugated ligand polymers entwined around copper centres. Chem.: Eur. J., 6, 1663-1673.
225. Buey, J. and Swager, T. (2000) Three-strand conducting ladder polymers: two-step electropolymerization of metallorotaxanes. Angew. Chem. Int. Ed., 39, 608-612.
226. Reddinger, J. and Reynolds, J. (1998) Site specific electropolymerization to form transition-metal-containing, electroactive polythiophenes. Chem. Mater., 10, 1236-1243.
227. Aubert, P.-H., Audebert, P., Capdevielle, P., Maumy, M., and Roche, M. (1999) Electrochemical oxidative polymerization of binuclear. anil and salen-type complexes and tetrahydro derivatives. New J. Chem., 23, 297-301.
228. Clot, O., Wolf, M., and Patrick, B. (2001) Electropolymerization of Pd(II) complexes containing phosphinoterthiophene ligands. J. Am. Chem. Soc., 123, 9963-9973.
229. Kean, C. and Pickup, P. (2001) A low band gap conjugated metallopolymer with nickel bis(dithiolene) Crosslinks. Chem. Commun., 815-816.
230. Pozo-Gonzalo, C., Berridge, R., Skabara, P.J., Cerrada, E., Laguna, M., Coles, S., and Hursthouse, M.B. (2002) A new family of conjugated metallopolymers from electropolymerised bis[(terthiophene)dithiolene] complexes. Chem. Commun., 2408-2409.
231. Frampton, M. and Anderson, H. (2007) Insulated molecular wires. Angew. Chem. Int. Ed., 46, 1028-1064.
232. Liu, Y., Li, Y., and Schanze, K. (2002) Photophysics of p-conjugated oligomers and polymers that contain transition metal complexes. J. Photochem. Photobiol. C: Photochem. Rev., 3, 1-23.
233. Weder, C. (2005) Synthesis, processing and properties of conjugated polymer networks. Chem. Commun., 5378-5389.
234. Zulauf, A., Mellah, M., and Schulz, E. (2009) Original use of the same heterogeneous chiral catalyst batch to promote different asymmetric reactions. Chem. Commun., 6574-6576.
235. Powell, A., Bielawski, C., and Cowley, A. (2009) Electropolymerization of an N-heterocyclic carben-gold(I)complex. J. Am. Chem. Soc., ASAP, doi: 10.1021/ja908969q.
236. Park, S.H., Roy, A., Beaupre, S., Cho, S., Coates, N., Moon, J.S., Moses, D., Leclerc, M., Lee, K., and Heeger, A. (2009) Bulk heterojunction solar cells with internal quantum efficiency approaching 100%. Nature Phot., 3, 297-303.
237. Segura, J., Martin, N., and Guldi, D. (2005) Materials for organic solar cells: the C60/p-conjugated oligomer approach. Chem. Soc. Rev., 34, 31-47.
238. Jousselme, B., Blanchard, P., Levillain, E., de Bettignies, R., and Roncali, J. (2003) Electrochemical synthesis of C60-derivatized poly(thiophene)s from tailored precursors. Macromolecules, 36, 3020-3025.
239. Cravino, A. and Sariciftci, N.S. (2003) Molecules as bipolar conductors. Nat. Mater., 2, 360-361.
240. Roncali, J. (2005) Linear p-conjugated systems derivatized with C60-fullerene as molecular heterojunctions for organic photovoltaics. Chem. Soc. Rev., 34, 483-495.
241. Akiyama, T., Fukuyama, T., Sugawab, K., Yonedab, H., and Yamada, S. (2009) Photocurrent generation properties of electrochemically polymerized terthiophene-linked fullerene film. Synth. Met., 159, 965-968.
242. Khama, K., Sadki, S., and Chevrot, C. (2004) Oxidative electropolymerizations of carbazole derivatives in the presence of bithiophene. Synth. Met., 145, 135-140.
243. Tran-Van, F., Henri, T., and Chevrot, C. (2002) Synthesis and electrochemical properties of mixed ionic and electronic modified polycarbazole. Electrochim. Acta, 47, 2927-2936.
244. Berton, N., Fabre-Francke, I., Bourrat, D., Chandezon, F., and Sadki, S. (2009) Poly(bisthiophene-carbazole-fullerene) double-cable polymer as new donoracceptor material: preparation and electrochemical and spectroscopic characterization. J. Phys. Chem., 113, 14087-14093.
245. Audebert, P. and Hapiot, P. (1995) Fast electrochemical studies of the polymerization mechanisms of pyrroles and thiophenes. Identification of the first steps. Existence of p-dimers in solution. Synth. Met., 75, 95-102.
246. Audebert, P. and Miomandre, F. (2006) Electrochemistry of conducting polymers, in Handbook of Conducting Polymers, vol. 3, (eds T. Skotheim and J.R. Reynolds), Chapter 18, pp. 18-1-18-29, CRC Press.
247. Genies, E., Bidan, G., and Diaz, F. (1983) Spectroelectrochemical study of polypyrrole films. J. Electroanal. Chem., 149, 101-113.
248. Sadki, S., Schottland, P., Brodie, N., and Sabouraud, G. (2000) The mechanisms of pyrrole electropolymerization. Chem. Soc. Rev., 29, 283-293.
249. Otero, T. and Ariza, M. (2003) Revisiting the electrochemical and polymeric behavior of a polypyrrole free-standing electrode in aqueous solution. J. Phys. Chem. B, 107, 13954-13961.
250. Yoshida, J.I., Kataoka, K., Horcajada, R., and Aiichiro Nagaki, A. (2008) Modern strategies in electroorganic synthesis. Chem. Rev., 108, 2265-2299.
251. Dong, B., Zhang, S., Liqiang Zheng, L., and Jingkun Xu, J. (2008) Ionic liquid microemulsions: a new medium for electropolymerization. J Electroanal. Chem., 619-620, 193-196.
252. Keke Liu, K., Zhenglong Hu, Z., Rong Xue, R., Jianrong Zhang, J., and Junjie Zhu, J. (2008) Electropolymerization of high stable poly(3,4-ethylenedioxythiophene) in ionic liquids and its potential applications in electrochemical capacitor. J. Power Sources, 179, 858-862.
253. Yamato, K., Tominaga, T., Takashima, W., and Kaneto, K. (2009) Stability of electrochemo-mechanical strains in polypyrrole films using ionic liquids. Synth. Met., 159, 839-842.
254. Dong, B., Song, D., Zheng, L., Xu, J., and Li, N. (2009) Electrosynthesis of polyfluorene in an ionic liquid and characterization of its stable electrocatalytic activity for formic acid oxidation. J. Electroanal. Chem., 633, 63-70.
255. Zhang, A., Chen, J., Niu, D., Wallace, G., and Lu, J. (2009) Electrochemical polymerization of pyrrole in BMIMPF6 ionic liquid and its electrochemical response to dopamine in the presence of ascorbic acid. Synth. Met., 159, 1542-1545.
256. Yin, Z.-H., Long, Y.-Z., Gu, C.-Z., Wang, M.-X., and Duvail, J.-L. (2009) current-voltage characteristics in individual polypyrrole nanotube, poly(3,4-ethylenedioxythiophene) nanowire, polyaniline nanotube, and CdS nanorope. Nanoscale Res. Lett., 4, 63-69.
257. Kemp, N., Cochrane, J., and Newbury, R. (2009) Characteristics of the nucleation and growth of template-free polyaniline nanowires and fibrils. Synth. Met., 159, 435-444.
258. Catherine Debiemme-Chouvy, C. (2009) Template-free one-step electrochemical formation of polypyrrole nanowire array. Electrochem. Commun., 11, 298-301.
259. Mo, X., Wang, J., Wang, Z., and Wang, S. (2004) The application of polypyrrole fibrils in hydrogen evolution reaction. Synth. Met., 142, 217-221.
260. -doped polyaniline nanofibers as a new electroactive material for high performance redox supercapacitor. Synth. Met., 159, 1717-1722.