Elastic anisotropy modeling of Kimmeridge shale

Journal of Geophysical Research: Solid Earth

Volumn 118, Issue 8, 2013, Pages 3931-3956

  Vasin, Roman N ^a,b   Wenk, Hans Rudolf ^a   Kanitpanyacharoen, Waruntorn ^a   Matthies, Siegfried ^a,b   Wirth, Richard ^c  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b JOINT INSTITUTE FOR NUCLEAR RESEARCH   (Russian Federation)

^c GFZ GERMAN RESEARCH CENTRE FOR GEOSCIENCES   (Germany)

Author keywords

elastic anisotropy; microstructure; physical properties of rocks; porosity; shale

Indexed keywords

ALGORITHM; ANISOTROPY; CAP ROCK; ELASTIC PROPERTY; ELASTICITY; MICROSTRUCTURE; POROSITY; ROCK MECHANICS; SEDIMENTARY ROCK; SHALE; STIFFNESS;

EID: 84885098411     PISSN: 21699313     EISSN: 21699356     Source Type: Journal    
DOI: 10.1002/jgrb.50259     Document Type: Article

References (119)

1. Aleksandrov, K. S., and, T. V. Ryzhova, (1961), The elastic properties of rock-forming minerals. II: Layered silicates, Izv. Acad. Sci. USSR, Geophys. Ser., 12, 1799-1804.
2. Almqvist, B. S. G., D. Mainprice, C. Madonna, L. Burlini, and, A. M. Hirt, (2011), Application of differential effective medium, magnetic pore fabric analysis, and X-ray microtomography to calculate elastic properties of porous and anisotropic rock aggregates, J. Geophys. Res., 116, B01204, doi: 10.1029/2010JB007750.
3. Antao, S. M., I. Hassan, J. Wang, P. L. Lee, and, B. H. Toby, (2008), State-of-the-art high-resolution powder X-ray diffraction (HRPXRD) illustrated with Rietveld structure refinement of quartz, sodalite, tremolite, and meionite, Can. Mineral., 46, 1501-1509.
4. Aplin, A. C., and, S. R. Larter, (2005), Fluid flow, pore pressure, wettability and leakage in mudstone cap rocks, in Evaluating Fault and Cap Rock Seals, American Association of Petroleum Geologists Hedberg Series No.2, edited by, P. Boult, and, J. Kaldi, pp. 1-12, AAPG, Tulsa, OK.
5. Arns, C. H., M. A. Knackstedt, W. Val Pinczewski, and, E. J. Garboczi, (2002), Computation of linear elastic properties from microtomographic images: Methodology and agreement between theory and experiment, Geophysics, 67, 1396-1405. (Pubitemid 35182103)
6. Aste, T., (1996), Circle, sphere and drop packings, Phys. Rev. E, 53, 2571-2579.
7. Bailey, S. W., (Ed) (1984), Micas, Rev. in Mineral., vol. 13, Mineral. Soc. of Am., Washington, D. C.
8. Bayuk, I. O., M. Ammerman, and, E. M. Chesnokov, (2007), Elastic moduli of anisotropic clay, Geophysics, 72, D107-D117. (Pubitemid 47382174)
9. Ben Ismail, W., and, D. Mainprice, (1998), An olivine fabric database: An overview of upper mantle fabrics and seismic anisotropy, Tectonophysics, 296, 145-157. (Pubitemid 29092252)
10. Berryman, J. G., (1980a), Long-wavelength propagation in composite elastic media I. Spherical inclusions, J. Acoust. Soc. Am., 68, 1809-1819.
11. Berryman, J. G., (1980b), Long-wavelength propagation in composite elastic media II. Ellipsoidal inclusions, J. Acoust. Soc. Am., 68, 1820-1831.
12. Bish, D. L., and, R. B. Von Dreele, (1989), Rietveld refinement of non-hydrogen atomic positions in kaolinite, Clays Clay Miner., 37, 289-296. (Pubitemid 20638677)
13. Bõna, A., D. Nadri, and, M. Brajanovski, (2012), Thomsen's parameters from P-wave measurements in a spherical sample, Geophys. Prospect., 60, 103-116.
14. Bossart, P., and, M. Thury, (2007), Research in the Mont Terri Rock laboratory: Quo vadis?, Phys. Chem. Earth Part A., 32, 19-31. (Pubitemid 46381585)
15. Brown, J. M., E. H. Abramson, and, R. J. Angel, (2006), Triclinic elastic constants for low albite, Phys. Chem. Miner., 33, 256-265.
16. Bruggeman, D. A. G., (1935), Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen, Ann. Phys., 24, 636-679.
17. Budiansky, B., (1965), On the elastic moduli of some heterogeneous materials, J. Mech. Phys. Solids, 13, 223-227.
18. Bunge, H.-J., (1982), Texture Analysis in Materials Science: Mathematical Methods, Butterworths, London.
19. Castagna, J. P., M. L. Batzle, and, T. K. Kan, (1993), Rock physics-The link between rock properties and AVO response, in Offset-Dependent Reflectivity-Theory and Practice of AVO Analysis, edited by, J. P. Castagna, and, M. M. Backus, pp. 135-171, Society of Exploration Geophysicists, Tulsa, Okla.
20. 2 storage site: The Utsira Sand, Sleipner, northern North Sea, Energy, 29, 1371-1381. (Pubitemid 38728687)
21. Cholach, P. Y., and, D. R. Schmitt, (2006), Intrinsic elasticity of a textured transversely isotropic muscovite aggregate: Comparisons to the seismic anisotropy of schists and shales, J. Geophys. Res., 111, B09410, doi: 10.1029/2005JB004158.
22. Dellinger, J., and, L. Vernik, (1994), Do traveltimes in pulse-transmission experiments yield anisotropic group or phase velocities?, Geophysics, 59, 1774-1779.
23. Dewhurst, D. N., and, A. F. Siggins, (2006), Impact of fabric microcracks and stress field on shale anisotropy, Geophys. J. Int., 165, 135-148.
24. Downs, R. T., R. M. Hazen, and, L. W. Finger, (1994), The high-pressure crystal chemistry of low albite and the origin of the pressure dependency of Al-Si ordering, Am. Mineral., 79, 1042-1052.
25. Dræge, A., M. Jakobsen, and, T. A. Johansen, (2006), Rock physics modelling of shale diagenesis, Pet. Geosci., 12, 49-57. (Pubitemid 43286158)
26. Eshelby, J. D., (1957), The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proc. R. Soc. London, Ser. A, 241, 376-396.
27. Gualtieri, A. F., (2000), Accuracy of XRPD QPA using the combined Rietveld-RIR method, J. Appl. Crystallogr., 33, 267-278. (Pubitemid 32143742)
28. Hashin, Z., and, S. Shtrikman, (1963), A variational approach to the theory of the elastic behaviour of multiphase materials, J. Mech. Phys. Solids, 11, 127-140.
29. Hayward, A. T. J., (1967), Compressibility equations for liquids: A comparative study, Br. J. Appl. Phys., 18, 965-977.
30. Heyliger, P., H. Ledbetter, and, S. Kim, (2003), Elastic constants of natural quartz, J. Acoust. Soc. Am., 114, 644-650. (Pubitemid 36959466)
31. Hill, R., (1952), The elastic behaviour of a crystalline aggregate, Proc. Phys. Soc. London, Sect. A, 65, 349-354.
32. Hill, R., (1965), A self-consistent mechanics of composite materials, J. Mech. Phys. Solids, 13, 213-222.
33. Hirsekorn, S., (1990), Elastic properties of polycrystals-A review, Texture Microstruct., 12, 1-14.
34. Hornby, B. E., (1998), Experimental laboratory determination of the dynamic elastic properties of wet, drained shales, J. Geophys. Res., 103, 29945-29964. (Pubitemid 128665308)
35. Hornby, B. E., L. M. Schwartz, and, J. A. Hudson, (1994), Anisotropic effective-medium modeling of the elastic properties of shales, Geophysics, 59, 1570-1583.
36. Jakobsen, M., and, T. A. Johansen, (2000), Anisotropic approximations for mudrocks: A seismic laboratory study, Geophysics, 65, 1711-1725. (Pubitemid 32177136)
37. Jakobsen, M., J. A. Hudson, T. A. Minshull, and, S. C. Singh, (2000), Elastic properties of hydrate-bearing sediments using effective medium theory, J. Geophys. Res., 105, 561-577.
38. Jakobsen, M., T. A. Johansen, and, B. O. Ruud, (2001), Modeled velocity and reflectivity properties of anisotropic hydrated sediments, J. Comput. Acoust., 9, 1507-1522. (Pubitemid 33575109)
39. Jech, J., (1991), Computation of elastic parameters of anisotropic medium from travel times of quasi-compressional waves, Phys. Earth Planet. Inter., 66, 153-159.
40. Johansen, T. A., B. O. Ruud, and, M. Jakobsen, (2004), Effect of grain scale alignment on seismic anisotropy and reflectivity of shales, Geophys. Prospect., 52, 133-149. (Pubitemid 38342002)
41. Johnston, D. H., (1987), Physical properties of shale at temperature and pressure, Geophysics, 52, 1391-1401.
42. Jones, L. E. A., and, H. F. Wang, (1981), Ultrasonic velocities in Cretaceous shales from the Williston basin, Geophysics, 46, 288-297.
43. Kanitpanyacharoen, W., D. Y. Parkinson, F. de Carlo, F. Marone, M. Stampanoni, R. Mokso, A. MacDowell, and, H.-R. Wenk, (2013), A comparative study of X-ray tomographic microscopy on shales at different synchrotron facilities: ALS, APS and SLS, J. Synchrotron Radiat., 20, 172-180.
44. Karmous, M. S., (2011), Theoretical study of kaolinite structure; energy minimization, and crystal properties, World J. Nano Sci. Eng., 1, 62-66.
45. Katahara, K. W., (1996), Clay mineral elastic properties, Soc. Explor. Geophys. Tech. Program Expanded Abstr., 15, 1691-1694.
46. Klíma, K., (1973), The computation of elastic constants of an anisotropic medium from the velocities of body waves, Stud. Geophys. Geod., 17, 115-122.
47. Kneer, G., (1965), Über die Berechnung der Elastizitätsmoduln vielkristalliner Aggregate mit Textur, Phys. Status Solidi B, 9, 825-838.
48. Kröner, E., (1958), Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls, Z. Phys., 151, 504-518.
49. 2 pyrite from 0 to 135 GPa, Phys. Chem. Miner., 32, 564-567. (Pubitemid 43013164)
50. Le Ravalec, M., and, Y. Guéguen, (1996), High- and low-frequency elastic moduli for a saturated porous/cracked rock-Differential self-consistent and poroelastic theories, Geophysics, 61, 1080-1094.
51. Lebensohn, R. A., A. D. Rollett, and, P. Suquet, (2011), Fast Fourier transform-based modeling for the determination of micromechanical fields in polycrystals, J. Miner. Met. Mater. Soc. (JOM), 63, 13-18.
52. Liu, Y., and, D. R. Schmitt, (2006), The transition between the scale domains of ray and effective medium theory and anisotropy: Numerical models, Pure Appl. Geophys., 163, 1327-1349. (Pubitemid 44123010)
53. Lokajicek, T., P. Lukas, A. N. Nikitin, I. V. Papushkin, V. V. Sumin, and, R. N. Vasin, (2011), The determination of the elastic properties of an anisotropic polycrystalline graphite using neutron diffraction and ultrasonic measurements, Carbon, 49, 1374-1384.
54. Lonardelli, I., H.-R. Wenk, and, Y. Ren, (2007), Preferred orientation and elastic anisotropy in shales, Geophysics, 72, D33-D40. (Pubitemid 46403854)
55. Lutterotti, L., S. Matthies, H.-R. Wenk, A. S. Schultz, and, J. W. Richardson, (1997), Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra, J. Appl. Phys., 81, 594-600. (Pubitemid 127667431)
56. Lutterotti, L., D. Chateigner, S. Ferrari, and, J. Ricote, (2004), Texture, residual stress and structural analysis of thin films using a combined X-ray analysis, Thin Solid Films, 450, 34-41.
57. Lutterotti, L., M. Voltolini, H.-R. Wenk, K. Bandyopadhyay, and, T. Vanorio, (2010), Texture analysis of turbostratically disordered Ca-montmorillonite, Am. Mineral., 95, 98-103.
58. Makarynska, D., B. Gurevich, R. Ciz, C. H. Arns, and, M. A. Knackstedt, (2008), Finite element modelling of the effective elastic properties of partially saturated rocks, Comput. Geosci., 34, 647-657.
59. Mallants, D., J. Marivoet, and, X. Sillen, (2001), Performance assessment of the disposal of vitrified high-level waste in a clay layer, J. Nucl. Mater., 298, 125-135. (Pubitemid 32833141)
60. Manevitch, O. L., and, G. C. Rutledge, (2004), Elastic properties of a single lamella of montmorillonite by molecular dynamics, J. Phys. Chem. B, 108, 1428-1435.
61. Matthies, S., (2002), 20 years WIMV, history, experience and contemporary developments, Mater. Sci. Forum, 408-412, 95-100.
62. Matthies, S., (2005), The ODF-spectrum: A new and comprehensive characterization of the degree of anisotropy of orientation distributions, Mater. Sci. Forum, 495-497, 331-338.
63. Matthies, S., (2010), On the combination of self-consistent and geometric mean elements for the calculation of the elastic properties of textured multi-phase samples, Solid State Phenom., 160, 87-93.
64. Matthies, S., (2012), GEO-MIX-SELF calculations of the elastic properties of a textured graphite sample at different hydrostatic pressures, J. Appl. Crystallogr., 45, 1-16.
65. Matthies, S., and, M. Humbert, (1995), On the principle of a geometric mean of even-rank symmetric tensors for textured polycrystals, J. Appl. Crystallogr., 28, 254-266.
66. Matthies, S., and, G. W. Vinel, (2005), On the calculation of the Eshelby tensor and the beauty of our nature, Solid State Phenom., 105, 113-120.
67. Matthies, S., and, H.-R. Wenk, (2009), Transformations for monoclinic crystal symmetry in texture analysis, J. Appl. Crystallogr., 42, 564-571.
68. Matthies, S., H.-R. Wenk, and, G. W. Vinel, (1988), Some basic concepts of texture analysis and comparison of three methods to calculate orientation distributions from pole figures, J. Appl. Crystallogr., 21, 285-304.
69. Matthies, S., H. G. Priesmeyer, and, M. R. Daymond, (2001), On the diffractive determination of single-crystal elastic constants using polycrystalline samples, J. Appl. Crystallogr., 34, 585-601. (Pubitemid 32938485)
70. Mazo, M. A., L. I. Manevitch, E. B. Gusarova, M. Y. Shamaev, A. A. Berlin, N. K. Balabaev, and, G. C. Rutledge, (2008a), Molecular dynamics simulation of thermomechanical properties of montmorillonite crystal. I. Isolated clay nanoplate, J. Phys. Chem. B, 112, 2964-2969.
71. Mazo, M. A., L. I. Manevitch, E. B. Gusarova, M. Y. Shamaev, A. A. Berlin, N. K. Balabaev, and, G. C. Rutledge, (2008b), Molecular dynamics simulation of thermomechanical properties of montmorillonite crystal. II. Hydrate montmorillonite crystal, J. Phys. Chem. C, 112, 17056-17062.
72. Militzer, B., H.-R. Wenk, S. Stackhouse, and, L. Stixrude, (2011), First-principles calculation of the elastic moduli of sheet silicates and their application to shale anisotropy, Am. Mineral., 96, 125-137.
73. Milton, G. W., and, R. V. Kohn, (1988), Variational bounds on the effective moduli of anisotropic composites, J. Mech. Phys. Solids, 36, 597-629.
74. Morris, P. R., (1970), Elastic constants of polycrystals, Int. J. Eng. Sci., 8, 49-61.
75. Moyano, B., K. T. Spikes, T. A. Johansen, and, N. H. Mondol, (2012), Modeling compaction effects on the elastic properties of clay-water composites, Geophysics, 77, D171-D183.
76. Mukerji, T., G. Mavko, D. Mujica, and, N. Lucet, (1995), Scale-dependent seismic velocity in heterogeneous media, Geophysics, 60, 1222-1233. (Pubitemid 26455890)
77. Nadri, D., J. Sarout, A. Bõna, and, D. Dewhurst, (2012), Estimation of anisotropy parameters of transversely isotropic shales with a tilted symmetry axis, Geophys. J. Int., 190, 1197-1203.
78. Nishizawa, O., (1982), Seismic velocity anisotropy in a medium containing oriented cracks-Transversely isotropic case, J. Phys. Earth, 30, 331-347. (Pubitemid 13545284)
79. Nishizawa, O., and, K. Kanagawa, (2010), Seismic velocity anisotropy of phyllosilicate-rich rocks: characteristics inferred from experimental and crack-model studies of biotite-rich schist, Geophys. J. Int., 182, 375-388.
80. Nishizawa, O., and, T. Yoshino, (2001), Seismic velocity anisotropy in mica-rich rocks: An inclusion model, Geophys. J. Int., 145, 19-32. (Pubitemid 32282077)
81. Nye, J. F., (1985), The Physical Properties of Crystals: Their Representation by Tensors and Matrices, Oxford University Press, Oxford.
82. O'Connell, R. J., and, B. Budiansky, (1974), Seismic velocities in dry and saturated cracked solids, J. Geophys. Res., 79, 5412-5426.
83. Ohno, I., K. Harada, and, C. Yoshitomi, (2006), Temperature variation of elastic constants of quartz across the α-β transition, Phys. Chem. Miner., 33, 1-9.
84. Ortega, A. J., F.-J. Ulm, and, Y. Abousleiman, (2007), The effect of nanogranular nature of shale on their poroelastic behavior, Acta Geotech., 2, 155-182.
85. Pham, N. H., J. M. Carcione, H. B. Helle, and, B. Ursin, (2002), Wave velocities and attenuation of shaley sandstones as a function of pore pressure and partial saturation, Geophys. Prospect., 50, 615-627. (Pubitemid 36006363)
86. Plançon, A., S. I. Tsipurski, and, V. A. Drits, (1985), Calculation of intensity distribution in the case of oblique texture electron diffraction, J. Appl. Crystallogr., 18, 191-196. (Pubitemid 16460784)
87. Ponte Castañeda, P., and, J. R. Willis, (1995), The effect of spatial distribution on the effective behavior of composite materials and cracked media, J. Mech. Phys. Solids, 43, 1919-1951.
88. Radtke, F. K. F., A. Simone, and, L. J. Sluys, (2010), A partition of unity finite element method for obtaining elastic properties of continua with embedded thin fibers, Int. J. Numer. Methods Eng., 84, 708-732.
89. Reuss, A., (1929), Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle, Z. Angew. Math. Mech., 9, 49-58.
90. Rieder, M., J. C. Crelling, O. Šustai, M. Drábek, Z. Weiss, and, M. Klementová, (2007), Arsenic in iron disulfides in a brown coal from the North Behemian Basin, Czech Republic, Int. J. Coal Geol., 71, 115-121. (Pubitemid 46672756)
91. Rietveld, H. M., (1969), A profile refinement method for nuclear and magnetic structures, J. Appl. Crystallogr., 2, 65-71.
92. Rundle, J. B., and, K. W. Schuler, (1981), A composite model for the anisotropic elastic moduli of lean oil shale, Geophysics, 46, 163-171.
93. Sato, H., K. Ono, C. T. Johnston, and, A. Yamagishi, (2005), First-principle studies on the elastic constants of a 1:1 layered kaolinite mineral, Am. Mineral., 90, 1824-1826. (Pubitemid 43085561)
94. Sayers, C. M., (1994), The elastic anisotropy of shales, J. Geophys. Res., 99, 767-774. (Pubitemid 24424356)
95. Sayers, C. M., (2008), The effect of low aspect ratio pores on the seismic anisotropy of shales, Soc. Explor. Geophys. Tech. Program Expand. Abstr., 27, 2750-2754.
96. Schoenberg, M., and, J. Douma, (1988), Elastic wave propagation in media with parallel fractures and aligned cracks, Geophys. Prospect., 36, 571-590.
97. Silva, M. B. C., and, A. Stovas, (2009), Correspondence between the low- and high-frequency limits for anisotropic parameters in a layered medium, Geophysics, 74, WA25-WA33.
98. Spalthoff, P., W. Wunnike, C. Nauer-Gerhard, H.-J. Bunge, and, E. Schneider, (1993), Determination of the elastic tensor of a textured low-carbon steel, Texture Microstruct., 21, 3-16.
99. Spikes, K. T., (2011), Modeling elastic properties and assessing uncertainty of fracture parameters in the Middle Bakken Siltstone, Geophysics, 76, E117-E126.
100. Srinivasan, K. R., K. Matouš, and, P. H. Geubelle, (2008), Generalized finite element method for modeling nearly incompressible bimaterial hyperelastic solids, Comput. Meth. Appl. Mech. Eng., 197, 4882-4893.
101. Suter, J. L., P. V. Coveney, H. C. Greenwell, and, M.-A. Thyveetil, (2007), Large-scale molecular dynamics study of montmorillonite clay: Emergence of undulatory fluctuations and determination of material properties, J. Phys. Chem. C, 111, 8248-8259. (Pubitemid 47018153)
102. Tissot, B. P., and, D. H. Welte, (1984), Petroleum Formation and Occurrence, Springer, Berlin.
103. Twardowski, K., J. Traple, and, S. Rychlicki, (2004), Evaluation of rock porosity measurement accuracy with a helium porosimeter, Acta Montan. Slovaca, 9, 316-318.
104. Ufer, K., G. Roth, R. Kleeberg, H. Stanjek, R. Dohrmann, and, J. Bergmann, (2004), Description of X-ray powder pattern of turbostratically disordered layer structures with a Rietveld compatible approach, Z. Kristallogr., 219, 519-527.
105. Valcke, S. L. A., M. Casey, G. E. Lloyd, J.-M. Kendall, and, Q. J. Fisher, (2006), Lattice preferred orientation and seismic anisotropy in sedimentary rocks, Geophys. J. Int., 166, 652-666. (Pubitemid 44082255)
106. Vaughan, M. T., and, S. Guggenheim, (1986), Elasticity of muscovite and its relationship to crystal structure, J. Geophys. Res., 91, 4657-4664.
107. Vernik, L., and, X. Liu, (1997), Velocity anisotropy in shales: A petrophysical study, Geophysics, 62, 521-532.
108. Vilhelm, J., V. Rudajev, R. Živor, T. Lokajíček, and, Z. Pros, (2010), Influence of crack distribution of rocks on P-wave velocity anisotropy-A laboratory and field scale study, Geophys. Prospect., 58, 1099-1110.
109. Voigt, W., (1887), Theoretische Studien über die Elasticitätsverhältnisse der Krystalle, Dieterichsche Verlags-Buchhandlung, Göttingen.
110. Walpole, L. J., (1969), On the overall elastic moduli of composite materials, J. Mech. Phys. Solids, 17, 235-251.
111. Walsh, J. B., (1965), The effect of cracks on the compressibility of rocks, J. Geophys. Res., 70, 381-389.
112. Wang, Z., H. Wang, and, M. E. Cates, (2001), Effective elastic properties of solid clays, Geophysics, 66, 428-440. (Pubitemid 32437437)
113. Watt, J. P., G. F. Davies, and, R. J. O'Connell, (1976), The elastic properties of composite materials, Rev. Geophys. Space Phys., 14, 541-563.
114. Wenk, H.-R., S. Matthies, J. Donovan, and, D. Chateigner, (1998), BEARTEX: A Windows-based program system for quantitative texture analysis, J. Appl. Crystallogr., 31, 262-269. (Pubitemid 128476212)
115. Wenk, H.-R., et al. (2013), Rietveld texture analysis from synchrotron diffraction images: II. Complex multiphase materials and diamond anvil cell experiments, Powder Diffraction, in press.
116. Wenk, H.-R., M. Voltolini, H. Kern, T. Popp, and, M. Mazurek, (2008), Anisotropy in shale from Mont Terri, Leading Edge, 27, 742-748.
117. Wenk, H.-R., W. Kanitpanyacharoen, and, M. Voltolini, (2010), Preferred orientation of phyllosilicates: Comparison of fault gouge, shale and schist, J. Struct. Geol., 32, 478-489.
118. Wenk, H.-R., R. N. Vasin, H. Kern, S. Matthies, S. C. Vogel, and, T. I. Ivankina, (2012), Revisiting elastic anisotropy of biotite gneiss from the Outokumpu scientific drill hole based on new texture measurements and texture-based velocity calculations, Tectonophysics, 570-571, 123-134.
119. Wirth, R., (2009), Focused Ion Beam (FIB) combined with SEM and TEM: Advanced analytical tools for studies of chemical composition, microstructure and crystal structure in geomaterials on a nanometre scale, Chem. Geol., 261, 217-229.