Nanostructured coating based on epoxy/metal oxides: Kinetic curing and mechanical properties

Thermochimica Acta

Volumn 569, Issue , 2013, Pages 167-176

  Karasinski, E N ^a   Da Luz, M G ^b   Lepienski, C M ^c   Coelho, L A F ^a  

^a SANTA CATARINA STATE UNIVERSITY   (Brazil)

^b Research and Development Department   (Brazil)

^c FEDERAL UNIVERSITY OF PARANÁ   (Brazil)

Author keywords

Epoxy; Interphase; Kinetic curing; Metal oxides; Nanocomposites; Scratch

Indexed keywords

ACTIVATED ALUMINA; ACTIVATION ENERGY; ALUMINA; CHEMICAL ACTIVATION; CROSSLINKING; CURING; EPOXY RESINS; GLASS TRANSITION; KINETICS; MECHANICAL PROPERTIES; NANOCOMPOSITES; ZINC; ZINC OXIDE;

EPOXY; INSTRUMENTED INDENTATION; INTERPHASE; METAL OXIDES; NANOSTRUCTURED COATINGS; SCRATCH; TOUGHENING MECHANISMS; TWIN SCREW EXTRUDERS;

METALLIC MATRIX COMPOSITES;

EID: 84884535609     PISSN: 00406031     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tca.2013.07.015     Document Type: Article

References (117)

1. M. Biron, Thermosets and Composites, 1st ed., Elsevier, Oxford, 2003.
2. C. Augustsson, NM Epoxy Handbook, 3rd ed., Nils Malmgren AB, Ytterby, 2004.
3. P.M. Ajayan, L.S. Schadler, P.V. Braun, Nanocomposites Science and Technol-ogy, 1st ed., Wiley-VCH, Weinheim, 2004.
4. S.M. Lindsay, Introduction to Nanoscience, 1st ed., Oxford, New York, 2010.
5. M. Köhler, W. Fritzsche, Nanotechnology, 2nd ed., Wiley-VCH, Weinheim, 2007.
6. Y.W. Mai, Z.Z. Yu, Polymer Nanocomposites, 1st ed., Woodhead Publishing Limited, Cambridge, 2006.
7. B. Vivo, et al., Electromagnetic properties of carbon nanotubes/epoxynanocomposites, IEEE International Symposium on EMC and EMC Europe(2009).
8. V. Mittal, Polymer Nanotube Nanocomposites: Synthesis Properties and Applications, 1st ed., Scrivener-LLC, Salem, 2010.
9. C. Chen, M. Khobaib, D. Curliss, Epoxy layered-silicate nanocomposites, Progress in Organic Coatings 47 (2003) 376-383.
10. L.A. Utracki, Clay-containing Polymeric Nanocomposites, 1st ed., Rapra Tech-nology Limited, Shawbury, 2004.
11. R.C. Smith, et al., The mechanisms leading to the useful electrical properties of polymer nanodielectrics, IEEE Transactions on Dielectrics and Electrical Insulation 15 (2008) 187-196. (Pubitemid 351225211)
12. J.K. Nelson, Dielectric Polymer Nanocomposites, 1st ed., Springer, New York, 2010.
13. B. Wetzel, F. Haupert, M.Q. Zhang, Epoxy nanocomposites with high mechan-ical and tribological performance, Composites Science and Technology 63(2003) 2055-2067. (Pubitemid 37111070)
14. B.B. Johnsen, et al., Toughening mechanisms of nanoparticles-modified epoxypolymer, Polymer 48 (2007) 530-541.
15. Y.Q. Li, S.Y. Fu, Y.W. Mai, Preparation and characterization of transparentzno/epoxy nanocomposites with high-UV shielding efficiency, Polymer 47(2006) 2127-2132.
16. T. Tanaka, Dielectric nanocomposites with insulating properties, IEEE Trans-actions on Dielectrics and Electrical Insulation 12 (2005) 914-928. (Pubitemid 41757791)
17. R.W. Siegel, What do we really know about the atomic-scale structures ofnanophase materials, Journal of Physics and Chemistry of Solids 55 (1994)1097-1106.
18. K.W. Putz, et al., Effect of cross-link density on interphase creation in polymernanocomposites, Macromolecule 41 (2008) 6752-6756.
19. R. Bockstaller, R.A. Mickiewicz, E.L. Thomas, Block copolymers nanocompos-ites: perspectives for tailored functional materials, Advanced Materials 17(2005) 1331-1349. (Pubitemid 40833813)
20. S.G. Hong, J.S. Tsai, The adsorption on curing behavior of the epoxy ami-doamine system in the presence of metal oxides, Journal of Thermal Analysis and Calorimetry 63 (2006) 31-46.
21. M. Anand, A.K. Srivastava, Synthesis of zinc-containing epoxy-resin, Journal of Applied Polymer Science 51 (1994) 203-211.
22. S.G. Hong, J.J. Lin, Effect of DICY content and metal oxides on the curing behav-ior of brominated epoxy resin, Journal of Applied Polymer Science 59 (1996)1597-1605. (Pubitemid 126535085)
23. S.G. Hong, T.C. Wang, Effects of copper oxides on the curing of brominatedepoxy-resin, Thermochimica Acta 237 (1994) 305-316.
24. J. Baller, et al., The catalytic influence of alumina nanoparticles on epoxycuring, Thermochimica Acta 517 (2011) 34-39.
25. 3nanoparticles on the isothermal cure of an epoxy resin, Journal of Physics: Condensed Matter 21 (2009) 035118.
26. J. Baller, et al., Interactions between silica nanoparticles and an epoxy resinbefore and during network formation, Polymer 50 (2009) 3211-3219.
27. 2nanocomposites, Science of Advanced Materials 2 (2010) 200-209.
28. O. Zabihi, et al., The effect of zinc oxide nanoparticles on thermo-physicalproperties of diglycidyl ether of bisphenol A/2,2-diamino-1,1- binaphthalenenanocomposites, Thermochimica Acta 521 (2011) 49-58.
29. P. Rosso, L. Ye, Epoxy/silica nanocomposites: nanoparticles induced curekinetics and microstructure, Macromolecular Rapid Communications 28(2007) 121-126.
30. C. Alzina, N. Sbirrazzuoli, A. Mija, Epoxy-amine based nanocomposites rein-forced by silica nanoparticles. Relationships between morphologic aspects, cure kinetics, and thermal properties, The Journal of Physical Chemistry C115 (2011) 22789-22795.
31. F. Bignotti, et al., Effect of the resin/hardener ratio on curing, structure andglass transition temperature of nanofilled epoxies, Polymer Composites 32(2011) 1034-1048.
32. S. Zhao, et al., Mechanisms leading to improved mechanical performancein nanoscale alumina filled epoxy, Composites Science and Technology 68(2008) 2965-2975.
33. 3additionupon the properties of epoxy-based hybrid composites, Materials Science and Engineering A 517 (2009) 185-190.
34. 2/epoxynanocomposite, Materials Science and Engineering A 487 (2008)574-585.
35. 2particle size on mechanical properties ofcured epoxy resin, Progress in Organic Coatings 69 (2010) 241-246.
36. B. Ramezanzadeh, M.M. Attar, Characterization of the fracture behavior andviscoelastic properties of epoxy-polyamide coating reinforced with nano-meter and micrometer sized ZnO particles, Progress in Organic Coatings 71(2011) 242-249.
37. E. Vassileva, K. Friedrich, Epoxy/alumina nanoparticle composites II: Influ-ence of silane coupling agent treatment on mechanical performance and wearresistance, Journal of Applied Polymer Science 101 (2006) 4410-4417. (Pubitemid 44327976)
38. Z.Z. Wang, et al., Mechanical and tribological behavior of epoxy/silicananocomposites at the micro/nano scale, Tribology Letters 42 (2011)185-191.
39. C.H. Chen, J.Y. Jian, F.S. Yen, Preparation and characterization ofepoxy γ-aluminum oxide nanocomposites, Composites A 40 (2009)463-468.
40. H. Zhang, et al., The effects of alumina nanofillers on mechanical properties ofhigh-performance epoxy resin, Journal of Nanoscience and Nanotechnology 10 (2010) 7526-7532.
41. 3nanocomposites, Journal of Polymer Science Part B 44 (2006)1466-1473. (Pubitemid 43764473)
42. B. Wetzel, et al., Epoxy nanocomposites - fracture and toughening mecha-nisms, Engineering Fracture Mechanics 73 (2006) 2375-2398. (Pubitemid 44227779)
43. T.H. Hsieh, et al., The mechanisms and mechanics of the toughening of epoxypolymers modified with silica nanoparticles, Polymer 51 (2010) 6284-6294.
44. S.C. Tjong, Strutural and mechanical properties of polymer nanocomposites, Materials Science and Engineering 53 (2006) 73-197. (Pubitemid 44287462)
45. H. Liu, L. Brinson, Reinforcing efficiency of nanoparticles: a simple comparisonfor polymer nanocomposites, Composites Science and Technology 68 (2008)1502-1512.
46. J. Sanes, F.J. Carrión, M.D. Bermúdez, Effect of the addition of room temperature ionic liquid and ZnO nanoparticles on the wear and scratch resistance ofepoxy resin, Wear 268 (2010) 1295-1302.
47. Y.H. Hu, H. Gao, F.Y. Yan, Tribological and mechanical properties of nano ZnO-filled epoxy resin composites, Tribology 23 (2003) 216-220.
48. B. Wetzel, et al., Mechanical and tribological properties of microparticulate and nanoparticulate reinforced polymer composites, Proc 13°ICCM (2006).
49. W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation exper-iments, Journal of Materials Research 7 (1992) 1564-1583.
50. A.C. Fischer-Cripps, Nanoindentation, 3rd ed., Springer, New York, 2011.
51. X. Li, B. Bhusham, A review of nanoindentation continuous stiffness measurement technique and its applications, Materials Characterization 48 (2002)11-36. (Pubitemid 34811629)
52. L. Shen, et al., Nanoindentation and morphological studies of epoxy nanocom-posites, Macromolecular Materials and Engineering 291 (2006) 1358-1366. (Pubitemid 44892790)
53. X. Li, et al., Nanomechanical characterization of single-walled carbon nano-tube reinforced epoxy composites, Nanotechnology 15 (2004) 1416-1423.
54. A. Tiwari, Nanomechanical analysis of hybrid silicones and hybrid epoxycoatings: an brief review, Advances in Chemical Engineering and Science 2(2012) 34-44.
55. X.F. Yao, H.P. Zhao, H.Y. Yeh, Micro/nanoscopic characterization of epoxy-silica nanocomposites, Journal of Reinforced Plastics and Composites 25(2006) 189-198.
56. Y.F. Zhang, et al., Viscoelastic properties of nanosilica-filled epoxy compositesinvestigated by dynamic nanoindentation, Journal of Polymer Science Part B:Polymer Physics 47 (2009) 1030-1038.
57. 2in-situgenerated by means of non-hidrolytic sol-gel process, Polymer 53 (2012)283-290.
58. P. Kardar, M. Ebrahimi, S. Bastani, Study the effect of nano-alumina particleson physical-mechanical properties of UV cured epoxy acrylate via nano-indentation, Progress in Organic Coatings 62 (2008) 321-325.
59. I. Neitzel, et al., Mechanical properties of epoxy composites with high contents of nanodiamond, Composites Science and Technology 71 (2011) 710-716.
60. S. Turri, et al., Abrasion and nanoscratch in nanostructured epoxy coatings, Journal of Applied Polymer Science 118 (2010) 1720-1727.
61. C.K. Lam, K.T. Lau, Localized elastic modulus distribuition of nanoclay/epoxycomposites by using nanoindentation, Composite Structures 75 (2006)553-558.
62. A. Dasari, Z.Z. Yu, Y.W. Mai, Fundamental aspects and recent progress onwear/scratch damage in polymer nanocomposites, Materials Science and Engineering 63 (2009) 31-80.
63. S.S. Janet, et al., Scratch damage of polymers in nanoscale, Acta Materialia 52(2004) 431-443.
64. H.E. Kissinger, Variation of peak temperature with heating rate in differentialthermal analysis, Journal of Research of the National Bureau of Standards 57(1956) 217-221.
65. H.E. Kissinger, Reaction kinetics in differential thermal analysis, Analytical Chemistry 29 (1957) 1702-1706.
66. S. Vyazovkin, Evaluation of activation energy of thermally stimulatedsolid-state reactions under arbitrary variation of temperature, Journal of Computational Chemistry 18 (1997) 393-402. (Pubitemid 127590532)
67. G.I. Senum, R.T. Yang, Rational approximation of integral of Arrhenius function, Journal of Thermal Analysis 11 (1977) 445-447.
68. J. Málek, J.M. Criado, Empirical kinetics-models in thermal-analysis, Ther-mochimica Acta 203 (1992) 25-30.
69. J. Málek, Kinetics analysis of cristallization processes in amorphous materials, Thermochimica Acta 355 (2000) 239-253.
70. J. Málek, The kinetic analysis of non-isothermal data, Thermochimica Acta 200 (1992) 257-269.
71. J.Šesták, G. Berggren, Study of the kinetics of the mechanism of solid-statereactions at increasing temperatures, Thermochimica Acta 3 (1971) 1-12.
72. L. Hui, et al., Quantification of particle mixing in nanocomposites, Annual Report Conference on Electrical Insulation and Dielectric Phenomena (2008)317-320.
73. C. Calabrese, et al., A review on the importance of nanocomposites processingto enhance electrical insulation, IEEE Transactions on Dielectrics and Electri-cal Insulation 18 (2011) 938-945.
74. S.H. Goodman, Handbook of Thermoset Plastics, 2nd ed., Noyes Publications, Westwood, 1998.
75. R. Wagener, T.J.G. Reisinberg, A rheological method to compare the degree of exfoliation of nanocomposites, Polymer 44 (2003) 7513-7518. (Pubitemid 37296013)
76. C. Roberts, et al., Diffusion of poly(dimethylsiloxane) mixtures with silicatenanocomposites, Macromolecule 34 (2001) 538-543.
77. 3nanocomposites prepared by in situ polymerization, Polymer 45 (2004)6665-6673.
78. S. Jain, et al., Strong decrease in viscosity of nanoparticles-filled polymer meltsthrough selective adsorption, Soft Matter 4 (2008) 1848-1854.
79. S. Vyazovkin, N. Sbirrazzuoli, I. Dranca, Variation of the effective activationenergy throughout in the glass transition, Macromolecular Rapid Communi-cations 25 (2004) 1708-1713.
80. S. Vyazovkin, N. Sbirrazzuoli, Isoconversional kinetic analysis of thermallystimilated processes in polymers, Macromolecular Rapid Communications 27 (2006) 1515-1532. (Pubitemid 44535769)
81. S. Vyazovkin, C.A. Wight, Kinetics in solids, Annual Review of Physical Chem-istry 48 (1997) 125-149. (Pubitemid 127443904)
82. S. Vyazovkin, et al., ICTAC kinetics committee recommendations for performing kinetic computations on thermal analysis data, Thermochimica Acta 520(2011) 1-19.
83. S. Vyazovkin, N. Sbirrazzuoli, Kinetic analysis of isothermal cures performedbelow the limiting glass transition temperature, Macromolecular Rapid Com-munications 21 (2000) 85-90.
84. S. Vyazovkin, W. Linert, Detecting isokinetic relationships in non-isothermalsystems by the isoconversional method, Thermochimica Acta 269/270 (1995)61-72.
85. S. Vyazovkin, N. Sbirrazzuoli, Mechanism and kinetics of epoxy-aminecure studied by differential scanning calorimetry, Macromolecule 29 (1996)1867-1873. (Pubitemid 126520573)
86. S. Vyazovkin, N. Sbirrazzuoli, Isoconversional method to explore the mech-anism and kinetics of multi-step epoxy cures, Macromolecular Rapid Communications 20 (1999) 387-389. (Pubitemid 129715650)
87. N. Sbirrazzuoli, S. Vyazovkin, Learning about epoxy cure mechanisms fromisoconversional analysis of DSC data, Thermochimica Acta 388 (2002)289-298.
88. D. Zhou, et al., Nonisothermal cure of bisphenol epoxy resin with a nonlinearaliphatic polyamine hardener, Journal of Applied Polymer Science 123 (2012)1147-1152.
89. D. Roşu, A. Mititelu, C.N. Casçaval, Cure kinetics of a liquid-crystalline epoxyresin studied by non-isothermal data, Polymer Testing 23 (2004) 209-215.
90. A. Tejado, et al., Isoconversional kinetic analysis o novolac-type lignophenolicresins cure, Thermochimica Acta 471 (2008) 80-85.
91. G.R. Saad, E.E.A. Elhamid, S.A. Elmenyawy, Dynamic cure kinetics and thermaldegradation of brominated epoxy resin-organoclay based nanocomposites, Thermochimica Acta 524 (2011) 186-193.
92. D. Verchere, H. Sauterau, J.P. Pascault, Buildup of epoxycycloaliphaticamine networks, vitrification and gelation, Macromolecule 23 (1990) 725-731. (Pubitemid 20648141)
93. S. Vyazovkin, Modification of the integral isoconversional method to accountfor variation in the activation energy, Journal of Computational Chemistry 22(2001) 178-183. (Pubitemid 33646622)
94. W. Yu, E.D. Von'meerwal, Effect on molecular weight, branching, and freevolume, on diffusion in epoxies during curing, Macromolecule 23 (1990)882-889. (Pubitemid 20648167)
95. M. Ghaemy, S.M. Amini, M. Barghamadi, Nonisothermal cure kinetics of digly-cidylether of bisphenol-A/amine system reinforced with nanosilica particles, Journal of Applied Polymer Science 104 (2007) 3855-3863. (Pubitemid 46787059)
96. J.M. Thoma, W.J. Thomas, Principles and Practice of Heterogeneous Catalysis, 1st ed., VHC, Weinheim, 1997.
97. A.A. Trivino, et al., The Microkinetics of Heterogeneous Catalysis, 1st ed., American Chemical Society, New York, 1993.
98. R.I. Masael, Principle of Adsorption and Reaction in Solid Surfaces, 1st ed., John Wiley & Sons, New York, 1996.
99. C. Wöll, The chemistry and physics of zinc oxide surfaces, Progress in Surface Science 82 (2007) 55-120. (Pubitemid 46529412)
100. M.L. Kantam, et al., Catalytic guanylation of aliphatic, aromatic, heterocyclicprimary and secondary amines using nanocristalline zinc oxide, Tetrahedron 68 (2012) 5730-5737.
101. V. Srikant, D.R. Clarke, On the optical band gap of zinc oxide, Journal of Applied Physics 83 (1998) 5447-5451. (Pubitemid 128559169)
102. W.J. Blank, A.Z. He, M. Picci, Catalysis of the epoxy-carboxyl reaction, International Waterborne High-Solids, and Powder Coatings Symposium 23(2001).
103. A. Dimopoulos, A.A. Skordos, I.K. Partridge, Cure kinetics, glass transition temperature development and dielectric spectroscopy of a low temperaturecure epoxy-amine system, Journal of Applied Polymer Science 124 (2012)1899-1905.
104. S. Singha, J.M. Thomas, Influence of filler loading on dielectric properties oepoxy-ZnO nanocomposites, IEEE Transactions on Dielectrics and Electrical Insulation 16 (2009) 531-542.
105. S. Singha, J.M. Thomas, Reduction of permittivity in epoxy nanocomposites atlow nanofillers loadings, Annual Report Conference on Electrical Insulation and Dielectric Phenomena 726 (2008).
106. G. Polizos, et al., Physical properties of epoxy resin/titanium dioxidenanocomposites, Polymer Engineering and Science 51 (2011) 87-93.
107. P. Preetha, J.M. Thomas, AC breakdown characteristics of epoxy nanocom-posites, IEEE Transactions on Dielectrics and Electrical Insulation 18 (2011)1526-1534.
108. H. Pelletier, J. Krier, P. Mille, Characterization of mechanical properties of thin films using nanoindentation test, Mechanics of Materials 38 (2006)1182-1198. (Pubitemid 44189557)
109. Y.G. Jung, et al., Evaluation of elastic modulus and hardness of thinfilms by nanoindentation, Journal of Materials Research 19 (2004) 3076-3080.
110. 2particles, Wear 258 (2005)141-148. (Pubitemid 39648742)
111. Q.M. Jia, et al., The mechanical properties and tribological behavior of epoxy resin composites modified by different shape nanofillers, Polymers for Advanced Technologies 17 (2006) 168-173.
112. K.T. Faber, A.G. Evans, Crack deflection processes: I. Theory, Acta Metallurgica 31 (1983) 565-576.
113. K.T. Faber, A.G. Evans, Crack deflection processes: II. Experiment, Acta Metal-lurgica 31 (1983) 577-584.
114. L. Nielsen, R. Landel, Mechanical Properties of Polymers and Composites, 1st ed., Mark Decker, New York, 1994.
115. A.C. Roulin-Moloney, Fractography and Failure Mechanisms of Polymers and Composites, 1st ed., Elsevier Applied Science, London, 1986.
116. D.J. Green, P.S. Nicholson, J.D. Embury, Fracture of a brittle particulate com-posite, Journal of Materials Science 14 (1979) 1413-1420.
117. J. Mijovic, A. Fishbain, J. Wijaya, Mechanistic modeling of epoxy-amine: II. Com-parison of kinetics in thermal and microwave fields, Macromolecule 25 (1992)986-989.