Removing lead from metallic mixture of waste printed circuit boards by vacuum distillation: Factorial design and removal mechanism

Chemosphere

Volumn 93, Issue 4, 2013, Pages 677-682

  Li, Xingang ^a   Gao, Yujie ^a   Ding, Hui ^a  

^a TIANJIN UNIVERSITY   (China)

Author keywords

Experimental design; Lead removal; Mathematical model; Vacuum distillation; Waste printed circuit boards

Indexed keywords

DESIGN OF EXPERIMENTS; DISTILLATION; EFFICIENCY; HEATING; LEAD REMOVAL (WATER TREATMENT); MASS TRANSFER; MATHEMATICAL MODELS; METALS; MIXTURES; PARTICLE SIZE; PRINTED CIRCUIT BOARDS; STATISTICS; TIMING CIRCUITS; VACUUM EVAPORATION;

HEATING TEMPERATURES; MIXTURE EXPERIMENT; OPERATING CONDITION; OPERATION PRESSURE; REMOVAL MECHANISM; TWO LEVEL FACTORIAL DESIGNS; VACUUM DISTILLATION; WASTE PRINTED CIRCUIT BOARD;

PRINTED CIRCUIT DESIGN;

LEAD;

DATA ACQUISITION; DISTILLATION; EVAPORATION; EXPERIMENTAL DESIGN; HEATING; LEAD; MASS TRANSFER; NUMERICAL MODEL; PARTICLE SIZE; PRESSURE;

ARTICLE; DISTILLATION; ELECTRONICS; EVAPORATION; EXPERIMENTAL DESIGN; FACTORIAL ANALYSIS; HEATING; MATHEMATICAL MODEL; PARTICLE SIZE; PRESSURE; VACUUM; VACUUM DISTILLATION; VALIDATION STUDY; WASTE COMPONENT REMOVAL;

EXPERIMENTAL DESIGN; LEAD REMOVAL; MATHEMATICAL MODEL; VACUUM DISTILLATION; WASTE PRINTED CIRCUIT BOARDS;

DISTILLATION; ELECTRONIC WASTE; ELECTRONICS; ENVIRONMENTAL POLLUTANTS; LEAD; PARTICLE SIZE; PRESSURE; REFUSE DISPOSAL; TEMPERATURE; VACUUM;

EID: 84884354562     PISSN: 00456535     EISSN: 18791298     Source Type: Journal    
DOI: 10.1016/j.chemosphere.2013.06.005     Document Type: Article

References (25)

1. Adhikari B.B., Gurung M., Kawakita H., Jumina, Ohto K. Methylene crosslinked calix[6]arene hexacaarboxylic acid resin: a highly efficient solid phase extractant for decontamination of lead bearing effluents. J. Hazard. Mater. 2011, 193:200-208.
2. Ali S.T., Munirathnam N.R., Sudheer C., Reddy R.C., Prakash T.L. Purification of cadmium by vacuum distillation and its analysis. Mater. Lett. 2004, 58:1638-1641.
3. Ali S.T., Prasad D.S., Munirathnam N.R., Prakash T.L. Purification of tellurium by single-run multiple vacuum distillation technique. Sep. Purif. Technol. 2005, 43:263-267.
4. Bird R.B., Stewart W.E., Lightfoot E.N. Transport Phenomena 2002, Wiley, New York. second ed.
5. Chen M., Zhang F.-S., Zhu J. Lead recovery and the feasibility of foam glass production from funnel glass of dismantled cathode ray tube through pyrovacuum process. J. Hazard. Mater. 2009, 161:1109-1113.
6. Clausing P. The flow of highly rarefied gases through tubes of arbitrary length. J. Vac. Sci. Technol. 1971, 8:636-646.
7. Duan C., Wen X., Shi C., Zhao Y., Wen B., He Y. Recovery of metals from waste printed circuit boards by a mechanical method using a water medium. J. Hazard. Mater. 2009, 166:478-482.
8. Guo J., Cao B., Guo J., Xu Z. A plate produced by nonmetallic materials of pulverized waste printed circuit boards. Environ. Sci. Technol. 2008, 42:5267-5271.
9. Iida T., Guthrie R.I.L. The Physical Properties of Liquid Metals 1993, Oxford University Press, New York.
10. Ioannidis T.A., Zouboulis A.I. Selective removal of lead and bromide from a hazardous industrial solid waste using limited acid demand and separation factor at ambient conditions. J. Hazard. Mater. 2006, 131:46-58.
11. Kovalevski S.V., Kosyakov V.I., Shelpakova I.R. Cadmium purification by vacuum distillation in the presence of its oxide: thermodynamic modelling and experiment. J. Cryst. Growth 1996, 167:208-211.
12. Marcus C., Zevenbergen L.A. The reduction and distillation of isotopically enriched zinc oxides under high vacuum conditions. Nucl. Instrum. Meth. A 1999, 438:30-35.
13. Mohabuth N., Hall P., Miles N. Investigating the use of vertical vibration to recover metal from electrical and electronic waste. Miner. Eng. 2007, 20:926-932.
14. Moltó J., Font R., Gálvez A., Conesa J.A. Pyrolysis and combustion of electronic wastes. J. Anal. Appl. Pyrol. 2009, 84:68-78.
15. Montgomery D.C. Design and Analysis of Experiments 2001, Wiley, New York. fifth ed.
16. Oishi T., Koyama K., Alam S., Tanaka M., Lee J.C. Recovery of high purity copper cathode from printed circuit boards using ammoniacal sulfate or chloride solutions. Hydrometallurgy 2007, 89:82-88.
17. Ping Z., ZeYun F., Jie L., Qiang L., GuangRen Q., Ming Z. Enhancement of leaching copper by electro-oxidation from metal powders of waste printed circuit board. J. Hazard. Mater. 2009, 166:746-750.
18. Veit H.M., Bernardes A.M., Ferreira J.Z., Tenório J.A.S., Malfatti C.D.F. Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy. J. Hazard. Mater. 2006, 137:1704-1709.
19. Winkler O., Bakish R. Vacuum Metallurgy 1971, Elsevier, Amsterdam.
20. Wu J., Li J., Xu Z. Electrostatic separation for recovering metals and nonmetals from waste printed circuit board: problems and improvements. Environ. Sci. Technol. 2008, 42:5272-5276.
21. Yang T., Xu Z., Wen J., Yang L. Factors influencing bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans. Hydrometallurgy 2009, 97:29-32.
22. Yang H., Liu J., Yang J. Leaching copper from shredded particles of waste printed circuit boards. J. Hazard. Mater. 2011, 187:393-400.
23. Zhan L., Xu Z. Application of vacuum metallurgy to separate pure metal from mixed metallic particles of crushed waste printed circuit board scraps. Environ. Sci. Technol. 2008, 42:7676-7681.
24. Zhan L., Xu Z. Separating and recovering Pb from copper-rich particles of crushed waste printed circuit boards by evaporation and condensation. Environ. Sci. Technol. 2011, 45:5359-5365.
25. Zieliński W., Kurzydłowski K.J. TEM studies of the oxide scales formed on type 316 stainless steel during annealing at 600°C in a vacuum and air. Scripta Mater. 2000, 43:33-37.