Synergistic physical properties of cocured networks formed from Di- and tricyanate esters

ACS Applied Materials and Interfaces

Volumn 5, Issue 17, 2013, Pages 8772-8783

  Guenthner, Andrew J ^a   Reams, Josiah T ^b   Lamison, Kevin R ^b   Ramirez, Sean M ^b   Swanson, David D ^a   Yandek, Gregory R ^a   Sahagun, Christopher M ^a   Davis, Matthew C ^c   Mabry, Joseph M ^a  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

^c NAVAL AIR WARFARE CENTER   (United States)

Author keywords

cure kinetics; cyanate ester; flexural properties; polycyanurate networks; polymer blends; thermosetting resin

Indexed keywords

CURE KINETICS; CYANATE ESTERS; FLEXURAL PROPERTIES; HOMOGENEOUS BLENDS; MONOMER MIXTURES; PERFORMANCE BENEFITS; POLYCYANURATES; SUPERCOOLED LIQUID STATE;

BENDING STRENGTH; CURING; ESTERIFICATION; GLASS; GLASS TRANSITION; LIQUIDS; MIXTURES; MONOMERS; POLYMER BLENDS; THERMOSETS;

ESTERS;

EID: 84884225462     PISSN: 19448244     EISSN: 19448252     Source Type: Journal    
DOI: 10.1021/am402640p     Document Type: Article

References (63)

1. Chemistry and Technology of Cyanate Ester Resins; Hamerton, I., Ed.; Chapman & Hall: London, 1994.
2. Nair, C. P. R.; Mathew, D.; Ninan, K. N. In New Polymerization Techniques and Synthetic Methodologies; Abe, A., Albertsson, A.-C., Cantow, H. J., Eds.; Springer-Verlag: Berlin, 2001; Vol. 155, pp 1-99.
3. Fang, T.; Shimp, D. A. Prog. Polym. Sci. 1995, 20, 61-118
4. Shimp, D. A.; Craig, W. M. In 34th International SAMPE Symposium; SAMPE International: Covina, CA, 1989; pp 1336-1346.
5. Simon, S. L.; Gillham, J. K. J. Appl. Polym. Sci. 1993, 47, 461-485
6. Marella, V. V. An Investigation on the Hydrolysis of Polyphenolic Cyanate Esters using Near-IR Spectroscopy. Masters Thesis, Drexel University, Philadelphia, PA, 2008.
7. Goertzen, W. K.; Kessler, M. R. Composites, Part A 2007, 38, 779-784
8. Buckley, L. J.; Snow, A. W. Polym. Prepr. 1996, 37, 158-159
9. Pradhan, S.; Brahmbhatt, P.; Sudha, J. D.; Unnikrishnan, J. J. Therm. Anal. Calorim. 2011, 105, 301-311
10. Gitsas, A.; Yameen, B.; Lazzara, T. D.; Steinhart, M.; Duran, H.; Knoll, W. Nano Lett. 2010, 10, 2173-2177
11. Chen, H. C.; Shivakumar, K. CMC Comput. Mater. Continua 2008, 8, 33-42
12. Shivakumar, K. N.; Chen, H.; Holloway, G. J. Reinf. Plast. Compos. 2009, 28, 675-689
13. Laskoski, M.; Dominguez, D. D.; Keller, T. M. J. Polym. Sci., Part A: Polym. Chem. 2006, 44, 4559-4565
14. Lin, C. H.; Yang, K. Z.; Leu, T. S.; Sie, J. W. J. Polym. Sci., Part A: Polym. Chem. 2006, 44, 3487-3502
15. Maya, E. M.; Snow, A. W.; Buckley, L. J. Macromolecules 2002, 35, 460-466
16. Reams, J. T.; Boyles, D. A. J. Appl. Polym. Sci. 2011, 121, 756-763
17. Ryu, B. Y.; Emrick, T. Macromolecules 2011, 44, 5693-5700
18. Snow, A. W.; Buckley, L. J. Macromolecules 1997, 30, 394-405
19. Yan, H. Q.; Chen, S.; Qi, G. R. Polymer 2003, 44, 7861-7867
20. Lin, C. H.; Lin, H. T.; Tian, Y. W.; Dai, S. H. A.; Su, W. C. J. Polym. Sci., Part A: Polym. Chem. 2011, 49, 4851-4860
21. Cash, J. J.; Davis, M. C.; Ford, M. D.; Groshens, T. J.; Guenthner, A. J.; Harvey, B. G.; Lamison, K. R.; Mabry, J. M.; Meylemans, H. A.; Reams, J. T.; Sahagun, C. M. Polym. Chem. 2013, 4, 3859-3865
22. Davis, M. C.; Guenthner, A. J.; Groshens, T. J.; Reams, J. T.; Mabry, J. M. J. Polym. Sci., Part A: Polym. Chem. 2012, 50, 4127-4136
23. Meylemans, H. A.; Harvey, B. G.; Reams, J. T.; Guenthner, A. J.; Cambrea, L. R.; Groshens, T. J.; Baldwin, L. C.; Garrison, M. D.; Mabry, J. M. Biomacromolecules 2013, 14, 771-780
24. Zhang, Z. Y.; Yu, R. B.; Wang, F.; Wang, J. L.; Jiao, Y. S. J. Appl. Polym. Sci. 2011, 122, 2609-2615
25. Zhang, Z. Y.; Yu, R. B.; Wang, F.; Wang, J. L.; Jiao, Y. S. J. Appl. Polym. Sci. 2011, 120, 3716-3723
26. Wang, F.; Wang, J. L.; Zhu, Y. P.; Zhang, Z. Y.; Jiao, Y. S. Int. J. Polym. Anal. Charact. 2010, 15, 415-423
27. Hamerton, I.; Howlin, B. J.; Klewpatinond, P.; Takeda, S. Macromolecules 2009, 42, 7718-7735
28. Anuradha, G.; Rakesh, S.; Sarojadevi, M. Polym. Eng. Sci. 2009, 49, 889-895
29. Zhang, B. F.; Wang, Z. G.; Zhang, X. Polymer 2009, 50, 817-824
30. Anuradha, G.; Sarojadevi, M. J. Appl. Polym. Sci. 2008, 110, 938-944
31. Anuradha, G.; Sarojadevi, M. Polym. Bull. 2008, 61, 197-206
32. Kulkarni, A. D.; Tawade, B. V.; Wadgaonkar, P. P. High Perform. Polym. 2013, 25, 278-286
33. Cambrea, L. R.; Davis, M. C.; Groshens, T. J.; Guenthner, A. J.; Lamison, K. R.; Mabry, J. M. J. Polym. Sci., Part A: Polym. Chem. 2010, 48, 4547-4554
34. Yameen, B.; Duran, H.; Best, A.; Jonas, U.; Steinhart, M.; Knoll, W. Macromol. Chem. Phys. 2008, 209, 1673-1685
35. Yu, H.; Shen, C. J.; Tian, M. Z.; Qu, J.; Wang, Z. G. Macromolecules 2012, 45, 5140-5150
36. Guenthner, A. J.; Davis, M. C.; Lamison, K. R.; Yandek, G. R.; Cambrea, L. R.; Groshens, T. J.; Baldwin, L. C.; Mabry, J. M. Polymer 2011, 52, 3933-3942
37. Hamerton, I.; Glynn, S.; Hay, J. N.; Pullinger, M. A.; Shaw, S. J. Polym. Degrad. Stab. 2012, 97, 679-689
38. Tada, Y.; Moriya, N.; Inoue, T.; Suzuki, A.; Koyama, S. Phosphorus, Sulfur Silicon Relat. Elem. 2012, 187, 1555-1567
39. Guenthner, A. J.; Davis, M. C.; Ford, M. D.; Reams, J. T.; Groshens, T. J.; Baldwin, L. C.; Lubin, L. M.; Mabry, J. M. Macromolecules 2012, 45, 9707-9718
40. Koh, H. C. Y.; Dai, J.; Tan, E. J. Appl. Polym. Sci. 2006, 102, 4284-4290
41. Hwang, H. J.; Li, C. H.; Wang, C. S. J. Appl. Polym. Sci. 2005, 96, 2079-2089
42. Shimp, D. A.; Ising, S. J.; Christenson, J. R. In High Temperature Polymers and Their Uses; Society of Plastics Engineers: Cleveland, OH, 1989; pp 127-140.
43. Crawford, A. O.; Howlin, B. J.; Cavalli, G.; Hamerton, I. React. Funct. Polym. 2012, 72, 596-605
44. Lin, C. H.; Hsiao, C. N.; Li, C. H.; Wang, C. S. J. Polym. Sci., Part A: Polym. Chem. 2004, 42, 3986-3995
45. Crawford, A. O.; Hamerton, I.; Cavalli, G.; Howlin, B. J. PLoS One 2012, 7, e44487
46. Hamerton, I.; Howlin, B. J.; Pratt, C. R. Polymer 2010, 51, 5857-5868
47. Guenthner, A. J.; Lamison, K. R.; Vij, V.; Reams, J. T.; Yandek, G. R.; Mabry, J. M. Macromolecules 2012, 45, 211-220
48. Guenthner, A. J.; Yandek, G. R.; Mabry, J., M; Lamison, K. R.; Vij, V.; Davis, M. C.; Cambrea, L. R. Insights into moisture uptake and processability from new cyanate ester monomer and blend studies. SAMPE International Technical Conference; SAMPE International Business Office: Covina, CA, 2010; paper 42ISTC-119.
49. Lamison, K. R.; Guenthner, A. J.; Vij, V.; Mabry, J. M. PMSE Prepr. 2011, 104, 299-300
50. Reams, J. T.; Guenthner, A. J.; Lamison, K. R.; Vij, V.; Lubin, L. M.; Mabry, J. M. ACS Appl. Mater. Interfaces 2012, 4, 527-535
51. Guenthner, A. J.; Lamison, K. R.; Davis, M. C.; Cambrea, L. R.; Yandek, G. R.; Mabry, J. M. Cure Characteristics of Tricyanate Ester High-Temperature Composite Resins. 2011 SAMPE Spring Technical Conference and Exhibition-State of the Industry: Advanced Materials, Applications, and Processing Technology; SAMPE International Business Office: Covina, CA, 2011; paper 56-1681.
52. Peterlin, A. J. Res. Natl. Bur. Stand., Sect. A 1977, 81A, 243-250
53. Alfrey, T.; Gurnee, E. F.; Lloyd, W. G. J. Polym. Sci., Part C: Polym. Symp. 1966, 12, 249-261
54. Shimp, D. A.; Wentworth, J. E. In SAMPE European Chapter; Brandt, J.; Hornfeld, H.; Neitzel, M., Eds.; SAMPE International: Basel, 1992; pp 67-78.
55. Pascault, J. P.; Williams, R. J. J. J. Polym. Sci., Part B: Polym. Phys. 1990, 28, 85-95
56. Sheng, X.; Akinc, M.; Kessler, M. R. J. Therm. Anal. Calorim. 2008, 93, 77-85
57. Bauer, A.; Thunga, M.; Obusek, K.; Akinc, M.; Kessler, M. R. Polymer 2013, 54, 3994-4002
58. Deng, Y.; Martin, G. C. Polymer 1996, 37, 3593-3601
59. Corezzi, S.; Fioretto, D.; Santucci, G.; Kenny, J. M.. Polymer 2010, 51, 5833-5845
60. Chen, Y.-T.; Macosko, C. W. J. Appl. Polym. Sci. 1996, 62, 567-576
61. Chen, C. C.; Don, T. M.; Lin, T. H.; Cheng, L. P. J. Appl. Polym. Sci. 2004, 92, 3067-3079
62. Li, Q. X.; Simon, S. L. Macromolecules 2007, 40, 2246-2256
63. Georjon, O.; Galy, J. J. Appl. Polym. Sci. 1997, 65, 2471-2479