Synthesis, characterization, and cure chemistry of renewable bis(cyanate) esters derived from 2-methoxy-4-methylphenol

Biomacromolecules

Volumn 14, Issue 3, 2013, Pages 771-780

  Meylemans, Heather A ^a   Harvey, Benjamin G ^a   Reams, Josiah T ^b   Guenthner, Andrew J ^b   Cambrea, Lee R ^a   Groshens, Thomas J ^a   Baldwin, Lawrence C ^a   Garrison, Michael D ^a   Mabry, Joseph M ^b  

^a NAVAL AIR WARFARE CENTER   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMMERCIAL APPLICATIONS; FTIR SPECTROSCOPY; HIGH TEMPERATURE; METHYLENE GROUPS; SECONDARY DECOMPOSITION; SINGLE CRYSTAL X-RAY DIFFRACTION; STERICALLY DEMANDING; STRUCTURAL DIFFERENCES;

CARBON DIOXIDE; DEGRADATION; DIFFERENTIAL SCANNING CALORIMETRY; ENVIRONMENTAL IMPACT; ESTERIFICATION; ESTERS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GLASS; MASS SPECTROMETRY; MILITARY APPLICATIONS; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; PHENOLS; RECYCLING; RESINS; THERMOGRAVIMETRIC ANALYSIS; THERMOSETS; X RAY DIFFRACTION;

CURING;

CREOSOL; CRESOL; CYANIC ACID DERIVATIVE; ESTER; ISOCYANATE; LIGNIN; RESIN; UNCLASSIFIED DRUG; WATER;

ALKYLATION; ARTICLE; CARBON NUCLEAR MAGNETIC RESONANCE; CRYSTAL STRUCTURE; DECOMPOSITION; DEGRADATION; DIFFERENTIAL SCANNING CALORIMETRY; ENVIRONMENTAL IMPACT; GLASS TRANSITION TEMPERATURE; HIGH TEMPERATURE; IMMERSION; INFRARED SPECTROSCOPY; MASS SPECTROMETRY; MELTING POINT; POLYMERIZATION; PRIORITY JOURNAL; PROTON NUCLEAR MAGNETIC RESONANCE; PYROLYSIS; RECYCLING; STEREOSPECIFICITY; SYNTHESIS; WATER TRANSPORT; WATER VAPOR; X RAY DIFFRACTION;

ACETALDEHYDE; BENZHYDRYL COMPOUNDS; CALORIMETRY, DIFFERENTIAL SCANNING; COMPOSITE RESINS; CRESOLS; CYANATES; ESTERS; HOT TEMPERATURE; LIGNIN; MAGNETIC RESONANCE SPECTROSCOPY; PHENOLS; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; THERMOGRAVIMETRY; TRANSITION TEMPERATURE; X-RAY DIFFRACTION;

EID: 84874910072     PISSN: 15257797     EISSN: 15264602     Source Type: Journal    
DOI: 10.1021/bm3018438     Document Type: Article

References (45)

1. Payne, G. F. and Smith, P. B., Eds. Renewable and Sustainable Polymers ACS Symposium Series 1063; American Chemical Society: Washington, DC, 2011; pp 1-212.
2. Williams, C. K.; Hillmyer, M. A. Polym. Rev. 2008, 48, 1-10
3. Stewart, D. Ind. Crops Prod. 2008, 27, 202-207
4. Climent, M. J.; Corma, A.; Iborra, S. Green Chem. 2011, 13, 520-540
5. Dinjus, E.; Arnold, U.; Dahmen, N.; Höfer, R.; Wach, W. In Sustainable Solutions for Modern Economies; Höfer, R., Ed.; RSC Publishing: Cambridge, 2009; chap. 8, pp 125-163.
6. Alonso, D. M.; Bond, J. Q.; Dumesic, J. A Green Chem. 2010, 12, 1493-1513
7. U.S. Department of Energy In U.S. Billion-Ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry; ORNL/TM-2011/224; Perlack, R.D.; Stokes, B.J.; Eds.; Oak Ridge National Laboratory: Oak Ridge, TN, 2011; p 227.
8. Gandini, A. Macromolecules 2008, 41, 9491-9504
9. U.S. Department of Energy. In Top Value-Added Chemicals from Biomass Vol. II: Results of Screening for Potential Candidates from Biorefinery Lignin; PNNL-16983; Bozell, J. J.; Holladay, J. E.; Johnson, D.,; White, J. F., Eds.; Pacific Northwest National Laboratory and the National Renewable Energy Laboratory: Richland, Washington, 2007
10. Jae, J.; Tompsett, G. A.; Lin, Y.-C.; Carlson, T. R.; Shen, J.; Zhang, T.; Yang, B.; Wyman, C. E.; Conner, W. C.; Huber, G. W. Energy Environ. Sci. 2010, 3, 358-365
11. Huber, G. W.; Iborra, S.; Corma, A. Chem. Rev. 2006, 106, 4044-4098
12. Zakzeski, J.; Bruijnincx, C. A.; Jongerius, A. L.; Wechhuysen, B. M. Chem. Rev. 2010, 110, 3552-3599
13. Kadla, J. F.; Kubo, S.; Venditti, R. A.; Gilbert, R. D.; Compere, A. L.; Griffith, W. Carbon 2002, 40, 2913-2920
14. Kuusela, T. A.; Lindberg, J. J.; Levon, K.; Osterholm, J. E. ACS Symp. Ser. 1989, 397, 219-227
15. Guo, Z.-X.; Gandini, A. Eur. Polym. J. 1991, 27, 1177-1180
16. Bonini, C.; D'Auria, M.; Emanuele, L.; Ferri, R.; Pucciariello, R.; Sabia, A. R. J. Appl. Polym. Sci. 2005, 3, 1451-1456
17. Thring, R. W.; Vanderlaan, M. N.; Griffin, S. L. Biomass Bioenergy 1997, 12, 125-132
18. Hofmann, K.; Glasser, W. Macromol. Chem. Phys. 1994, 195, 65-80
19. Ismail, T. N.; Hassan, H. A.; Hirose, S.; Taguchi, Y.; Hatakeyama, T.; Hatakeyama, H. Polym. Int. 2010, 59, 181-186
20. Nonaka, Y.; Tomita, B.; Hatano, Y. Holzforschung 1997, 51, 183-187
21. Cetin, N. S.; Ozmen, N. Int. J. Adhes. Adhes. 2002, 22, 477-480
22. Li, S.; Lundquist, K. Nord. Pulp Pap. Res. J. 1994, 3, 191-195
23. El Mansouri, N.-E.; Yuan, Q.; Huang, F. Bioresources 2011, 6, 2647-2662
24. Pandey, M. P.; Kim, C. S. Chem. Eng. Technol. 2011, 34, 29-41
25. Amarasekara, A. S.; Wiredu, V.; Razzaq, A. Green Chem. 2012, 14, 2395-2397
26. Stanzione, J. F.; Sadler, J. M.; La Scala, J. J.; Reno, K. H.; Wool, R. P. Green Chem. 2012, 14, 2346-2352
27. Wang, Q.; Yang, Y.; Li, Y.; Yu, W.; Hou, Z. J. Tetrahedron 2006, 62, 6107-6112
28. Meylemans, H. A.; Groshens, T. J.; Harvey, B. G. ChemSusChem 2012, 5, 206-210
29. Conventional phenols, i.e., 3-methylphenol, require high phenol/aldehyde ratios and the reaction is relatively unselective, resulting in multiple products. See, for example, Bogan, L. E.; Wok, S. K. Macromolecules 1992, 25, 161-165
30. Nair, C. P. R.; Dona, M.; Ninan, K. N. Adv. Polym. Sci. 2001, 155, 1-99
31. Hamerton, I.; Hay, J. N. High Perform. Polym. 1998, 10, 163-174
32. Snow, A. W.; Buckley, L. J. In Handbook of Low and High Dielectric Constant Materials and Their Applications, Cyanate Ester Resins with Low Dielectric Properties and Applications; Nalwa, H. S., Ed.; Academic Press: San Diego, CA, 1999; pp 189-212.
33. Gitsas, A.; Yameen, B.; Lazzara, T. D.; Steinhart, M.; Duran, H.; Knoll, W. Nano Lett. 2010, 10, 2173-2177
34. Savary, F.; Bonito-Oliva, A.; Gallix, R.; Knaster, J.; Koizumi, N.; Mitchell, N.; Nakajima, H.; Okuno, K.; Sborchia, C. IEEE Trans. Appl. Supercond. 2010, 20, 381-384
35. Chen, P. C.; Saha, T. T.; Smith, A. M.; Romeo, R. Opt. Eng. 1998, 37, 666-676
36. Wienhold, P. D.; Persons, D. F. SAMPE J. 2003, 39, 6-17
37. CCDC 888614 (2), 888615 (3), and 888616 (4) contain the supplementary crystallographic data for this paper. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre through www.ccdc.cam.ac.uk/data request/cif. A combined cif file that contains the structural information for each compound is also available in the Supporting Information
38. A detailed explanation of thermal lag may be found in Guenthner, A. J.; Yandek, G. R.; Mabry, J., M; Lamison, K. R.; Vij, V.; Davis, M. C.; Cambrea, L. R. Insights into moisture uptake and processability from new cyanate ester monomer and blend studies. SAMPE International Technical Conference; SAMPE International Business Office: Salt Lake City, UT, 2010; Vol. 55, p 42ISTC-119.
39. Cambrea, L. R.; Davis, M. C.; Groshens, T. J.; Guenthner, A. J.; Lamison, K. R.; Mabry, J. M. J. Polym. Sci. Part A: Polym. Chem. 2010, 48, 4547-4554
40. Brown, R. J. C.; Brown, R. F. C. J. Chem. Educ. 2000, 77, 724-731
41. Hamerton, I.; Emsley, A. M.; Howlin, B. J.; Klewpatinond, P.; Takeda, S. Polymer 2004, 45, 2193-2199
42. Kasehagen, L. J.; Haury, I.; Macosko, C. W.; Shimp, D. A. J. Appl. Polym. Sci. 1996, 64, 107-118
43. Guenthner, A. J.; Davis, M. C.; Lamison, K. R.; Yandek, G. R.; Cambrea, L. R.; Groshens, T. J.; Baldwin, L. C.; Mabry, J. M. Polymer 2011, 52, 3933-3942 and references contained therein
44. IR spectral data can be obtained at the following web address: http://riodb01.ibase.aist.go.jp/sdbs/cgi-bin/cre-index.cgi?lang=eng
45. Ramirez, M. L.; Walters, R.; Savitski, E. P.; Lyon, R. E. Thermal Decomposition of Cyanate Ester Resins. DOT/FAA Report AR-01/32, 2001