Compressive viscoelastic properties of softwood kraft lignin-based flexible polyurethane foams

Fibers and Polymers

Volumn 14, Issue 8, 2013, Pages 1301-1310

  Jeong, Heonyoung ^a   Park, Jongshin ^a   Kim, Sunghoon ^a   Lee, Jungmin ^a   Ahn, Narang ^a  

^a Seoul National University   (South Korea)

Author keywords

Lignin; Polyurethane foam; Viscoelasticity

Indexed keywords

2 ,4-TOLUENE DIISOCYANATE; FLEXIBLE POLYURETHANES; MICROSCOPIC DEFORMATIONS; POLYETHYLENE GLYCOL (PEG); POLYURETHANE FOAM; SOFTWOOD KRAFT LIGNINS; VISCOELASTIC PROPERTIES; VISCOMETRIC PROPERTIES;

ELASTIC MODULI; ELASTICITY; FILLERS; FOAMS; LIGNIN; RIGID FOAMED PLASTICS; SHAPE OPTIMIZATION;

VISCOELASTICITY;

EID: 84883764943     PISSN: 12299197     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12221-013-1301-2     Document Type: Article

References (47)

1. W. Boerjan, J. Ralph, and M. Baucher, Annu. Rev. Plant Biol., 54, 519 (2003).
2. J. H. Lora and W. G. Glasser, J. Polym. Environ., 10, 39 (2002).
3. G. Gellerstedt and E.-L. Lindfors, Holzforschung, 38, 151 (1984).
4. P. M. Froass, A. J. Ragauskas, and J. E. Jiang, Holzforschung, 52, 385 (1998).
5. F. S. Chakar and A. J. Ragauskas, Ind. Crop. Prod., 20, 131 (2004).
6. N.-E. El Mansouri and J. Salvadó, Ind. Crop. Prod., 26, 116 (2007).
7. H. Cheradame, M. Detoisien, A. Gandini, F. Pla, and G. Roux, Br. Polymer J., 21, 269 (1989).
8. D. V. Evtuguin, J. P. Andreolety, and A. Gandini, Eur. Polym. J., 34, 1163 (1998).
9. S. Hirose, K. Kobashigawa, Y. Izuta, and H. Hatakeyama, Polymer International, 47, 247 (1998).
10. C. Ciobanu, M. Ungureanu, L. Ignat, D. Ungureanu, and V. I. Popa, Ind. Crop. Prod., 20, 231 (2004).
11. T. Hatakeyama, Y. Izuta, S. Hirose, and H. Hatakeyama, Polymer, 43, 1177 (2002).
12. E. A. B. d. Silva, M. Zabkova, J. D. Araújo, C. A. Cateto, M. F. Barreiro, M. N. Belgacem, and A. E. Rodrigues, Chem. Eng. Res. Des., 87, 1276 (2009).
13. H. Nadji, C. Bruzzèse, M. N. Belgacem, A. Benaboura, and A. Gandini, Macromol. Mater. Eng., 290, 1009 (2005).
14. H. Hatakeyama, A. Nakayachi, and T. Hatakeyama, Compos. Part A: Appl. S., 36, 698 (2005).
15. C. A. Cateto, M. F. Barreiro, A. E. Rodrigues, and M. N. Belgacem, Ind. Eng. Chem. Res., 48, 2583 (2009).
16. Z.-M. Liu, F. Yu, G.-Z. Fang, and H.-J. Yang, J. Forest Res., 20, 161 (2009).
17. W. D. Oliveira and W. G. Glasser, Polymer, 35, 1977 (1994).
18. S. Sarkar and B. Adhikari, Eur. Polym. J., 37, 1391 (2001).
19. S. Chahar, M. G. Dastidar, V. Choudhary, and D. K. Sharma, J. Adhes. Sci. Technol., 18, 169 (2004).
20. M. J. Elwell, A. J. Ryan, H. J. M. Grünbauer, and H. C. van Lieshout, Polymer, 37, 1353 (1996).
21. D. Eaves, "Handbook of Polymer Foams", Rapra Technology, 2004.
22. J. Pellinen and M. Salkinoja-Salonen, J. Chromatogr. A, 328, 299 (1985).
23. A. Reimann, R. Mörck, H. Yoshida, H. Hatakeyama, and K. P. Kringstad, J. Appl. Polym. Sci., 41, 39 (1990).
24. D. V. Dounis and G. L. Wilkes, Polymer, 38, 2819 (1997).
25. R. W. Thring, P. Ni, and S. M. Aharoni, Int. J. Polym. Mater., 53, 507 (2004).
26. A. H. Landrock, "Handbook of Plastic Foams: Types, Properties, Manufacture, and Applications", Noyes Publications, 1995.
27. C. A. Cateto, M. F. Barreiro, A. E. Rodrigues, M. C. Brochier-Salon, W. Thielemans, and M. N. Belgacem, J. Appl. Polym. Sci., 109, 3008 (2008).
28. 31P-NMR, FTIR and Wet Chemical Methods", 1994.
29. W. Thielemans and R. P. Wool, Biomacromolecules, 6, 1895 (2005).
30. ASTM D 3574-11, "ASTM D 3574-11", ASTM International, West Conshohocken, PA, 2011.
31. J. C. Moreland, G. L. Wilkes, and R. B. Turner, J. Appl. Polym. Sci., 52, 549 (1994).
32. S. W. White, S. K. Kim, A. K. Bajaj, P. Davies, D. K. Showers, and P. E. Liedtke, Nonlinear Dynamics, 22, 281 (2000).
33. M. Baumgaertel and H. H. Winter, Rheologica Acta, 28, 511 (1989).
34. H. Yoshida, R. Mörck, K. P. Kringstad, and H. Hatakeyama, J. Appl. Polym. Sci., 34, 1187 (1987).
35. L. W. Hill, Progress in Organic Coatings, 31, 235 (1997).
36. R. J. Zdrahala, R. M. Gerkin, S. L. Hager, and F. E. Critchfield, J. Appl. Polym. Sci., 24, 2041 (1979).
37. C. B. Wang and S. L. Cooper, Macromolecules, 16, 775 (1983).
38. J. P. Armistead, G. L. Wilkes, and R. B. Turner, J. Appl. Polym. Sci., 35, 601 (1988).
39. K. Nakamae, T. Nishino, S. Asaoka, and Sudaryanto, Int. J. Adhes. Adhes., 16, 233 (1996).
40. Z. S. Petrovi and J. Ferguson, Prog. Polym. Sci., 16, 695 (1991).
41. H. A. Barnes, Rheology Reviews, 1 (2003).
42. Z. S. Petrovi and I. Javni, J. Polym. Sci. Pol. Phys., 27, 545 (1989).
43. S. Velankar and S. L. Cooper, Macromolecules, 31, 9181 (1998).
44. G. A. Campbell, J. Appl. Polym. Sci., 24, 709 (1979).
45. R. E. Jones and G. Fesman, J. Cell. Plast., 1, 200 (1965).
46. H. Yoshida, R. Mörck, K. P. Kringstad, and H. Hatakeyama, J. Appl. Polym. Sci., 40, 1819 (1990).
47. M. Ashby and R. Medalist, Metall. Mater. Trans. A, 14, 1755 (1983).