An integrated approach of topology optimized design and selective laser melting process for titanium implants materials

Bio-Medical Materials and Engineering

Volumn 23, Issue 5, 2013, Pages 433-445

  Xiao, Dongming ^a,b   Yang, Yongqiang ^a   Su, Xubin ^a   Wang, Di ^a   Sun, Jianfeng ^a  

^a SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^b HUNAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

finite element analysis; selective laser melting (SLM); titanium implants materials; Topology optimization

Indexed keywords

EFFECTIVE ELASTIC MODULUS; INTEGRATED APPROACH; MAXIMUM STIFFNESS; MECHANICAL STIFFNESS; OPTIMIZED DESIGNS; SELECTIVE LASER MELTING; STIFFNESS PROPERTIES; TITANIUM IMPLANTS;

COMPRESSION TESTING; ELASTIC MODULI; FINITE ELEMENT METHOD; FUNCTIONALLY GRADED MATERIALS; OPTIMIZATION; POROSITY; SCAFFOLDS; SHAPE OPTIMIZATION; TITANIUM; TOPOLOGY;

STIFFNESS;

TITANIUM;

ARTICLE; FINITE ELEMENT ANALYSIS; MATHEMATICAL COMPUTING; POROSITY; PRIORITY JOURNAL; RIGIDITY; YOUNG MODULUS;

COMPUTER SIMULATION; ELASTIC MODULUS; EQUIPMENT FAILURE ANALYSIS; FINITE ELEMENT ANALYSIS; HARDNESS; HEATING; LASERS; MATERIALS TESTING; MODELS, CHEMICAL; PROSTHESES AND IMPLANTS; PROSTHESIS DESIGN; TITANIUM;

EID: 84883722979     PISSN: 09592989     EISSN: None     Source Type: Journal    
DOI: 10.3233/BME-130765     Document Type: Article

References (47)

1. L.C. Hieu, E. Bohez, J. Vander Sloten, P. Oris, H.N. Phien, E. Vatcharaporn and P.H. Binh, Design and manufacturing of cranioplasty implants by 3-Axis CNC milling, Technol. Health Care 10(2) (2002), 413-423
2. M. Truscott, D. De Beer, G. Vicatos, K. Hosking, L. Barnard, G. Booysen and I.R. Campbell, Using RP to promote collaborative design of customised medical implants, Rapid Prototyp. J. 13(2) (2007), 107-114
3. J. Winder, R.S. Cooke, J. Gray, T. Fannin and T. Fegan, Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates, J. Med. Eng. Technol. 23(1) (1999), 26-28
4. S. Singare, D. Li, B. Lu, Y. Liu, Z. Gong and Y. Liu, Design and fabrication of custom mandible titanium tray based on rapid prototyping, Med. Eng. Phys. 26(8) (2004), 671-676
5. W. Yan, J. Berthe and C. Wen, Numerical investigation of the effect of porous titanium femoral prosthesis on bone remodeling, Mater. Des. 32(4) (2011), 1776-1782
6. R. Langer and J.P. Vacanti, Tissue engineering, Science 260 (1993), 920-926
7. J. Parthasarathy, B. Starly and S. Raman, A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications, Journal of Manufacturing Proc. 13 (2011), 160-170
8. T. Van Cleynenbreugel, H. Van Oosterwyck, J. Vander Sloten and J. Schrooten, Trabecular bone scaffolding using a biomimetic approach, J. Mater. Sci-Mater. M. 13 (2002), 1245-1239
9. D.J. Yoo, Computer-Aided porous scaffold design for tissue engineering using triply periodic minimal surfaces, Int. J. Precis. Eng. Man. 12(1) (2011), 61-71
10. L. Lin, Q. Hu, X. Huang and G. Xu, Design and fabrication of bone tissue engineering scaffolds via rapid prototyping and CAD, J. Rare Earth 25 (2007), 379-383
11. C.K. Chua, K.F. Leong, C.M. Cheah and S.W. Chua, Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: Investigation and classification, Int. J. Adv. Manuf. Technol. 21 (2003), 291-301
12. C.K. Chua, K.F. Leong, C.M. Cheah and S.W. Chua, Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: Parametric library and assembly program, Int. J. Adv. Manuf. Technol. 21 (2003), 302-312
13. I. Sridhar, P.P. Adie and D.N. Ghista, Optimal design of customised hip prosthesis using fiber reinforced polymer composites, Mater. Des. 31(6) (2010), 2767-2775
14. R. Gabbrielli, I.G. Turner and C.R. Bowen, Development of modelling methods for materials to be used as bone substitutes, Key Eng. Mater. 361-363 (2008), 903-906
15. F.P.W. Melchels, K. Bertoldi, R. Gabbrielli, A.H. Velders, J. Feijen and D.W. Grijpma, Mathematically defined tissue engineering scaffold architectures prepared by stereolithography, Biomaterials 31 (2010), 6909-6916
16. M.P. Bendsøe and O. Sigmund, Topology Optimization, Springer-Verlag, Berlin, 2003
17. S.J. Hollister, R.A. Levy, T.M. Chu, J.W. Halloran and S.E. Feinberg, An image-based approach for designing and manufacturing craniofacial scaffolds, Int. J. Oral Max. Surg. 29 (2002), 67-71
18. S.J. Hollister, Porous scaffold design for tissue engineering, Nat. Mater. 4 (2005), 518-524
19. S.J. Hollister and C.Y. Lin, Computational design of tissue engineering scaffolds, Comput. Methods Appl. Mech. Eng. 196 (2007), 2991-2998
20. H. Kang, C. Lin and S.J. Hollister, Topology optimization of three dimensional tissue engineering scaffold architectures for prescribed bulk modulus and diffusivity, Struct. Multidisc. Optim. 42 (2010), 633-644
21. J.P. Kruth, G. Levy, F. Klocke and T. Childs, Consolidation phenomena in laser and powder-bed based layer manufacturing, Cirp. Ann-Manuf. Techn. 56(2) (2007), 730-759
22. S. Van Bael, B. Vandenbroucke, G. Kerckhofs, J. Schrooten and J.P. Kruth, Design and production of bone scaffolds with selective laser melting, in: Proc. TMS 2009, 138th TMS Annual Meeting and Exhibition, San Francisco, CA, USA, 2009
23. P. Heinl, A. Rottmair, C. Korner and R.F. Singer, Cellular titanium by selective electron beam melting, Adv. Eng. Mater. 9 (2007), 360-364
24. J.P. Masood, S.H. Singh and Y. Morsi, The design and manufacturing of porous scaffolds for tissue engineering using rapid prototyping, Int. J. Adv. Manuf. Technol. 27 (2005), 415-420
25. D. Dimitrov, K. Schreve and N. De Beer, Advances in three dimensional printing-state of the art and future perspectives, Rapid Prot. J. 12(3) (2006), 136-147
26. R. Banerjee, R.C. Collins, A. Genc and H.L. Fraser, Direct laser deposition of in situ Ti6-Al4-V-TiB composites, Mater. Sci. Eng. A 358 (2003), 343-349
27. V.J. Challis, A.P. Roberts, J.F. Grotowski, L.C. Zhang and T.B. Sercombe, Prototypes for bone implant scaffolds designed via topology optimization and manufactured by solid freeform fabrication, Adv. Eng. Mater. 12(11) (2010), 1106-1110
28. Z. Fang, B. Starly and W. Sun, Computer-Aided characterization for effective mechanical properties of porous tissue scaffolds, Comput. Aided Design 37 (2005), 65-72
29. S. Sturm, S. Zhou, Y. Mai and Q. Li, On stiffness of scaffolds for bone tissue engineering-A numerical study, J. Biomech. 43 (2010), 1738-1744
30. A. Benssousan, J.L. Lions and G. Papanicoulau, Asymptotic Analysis for Periodic Structures, North-Holland, Amsterdam, 1978
31. B. Hassani and E. Hinton, A review of homogenization and topology optimization I-homogenization theory for media with periodic structure, Comput. Struct. 69 (1998), 707-717
32. O. Sigmund and S. Torquato, Design of materials with extreme thermal expansion using a three-phase topology optimization method, J. Mech. Phys. Solids 45 (1997), 1037-1067
33. O. Sigmund, Tailoring materials with prescribed elastic properties, Mech. Mater. 20 (1995), 351-368
34. J.K. Guest and J.H. Prévost, Design of maximum permeability material structures, Comput. Method. Appl. M. 196(4-6) (2007), 1006-1017
35. M.P. Bendsøe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Comput. Method. Appl. Mech. Eng. 71 (1988), 197-224
36. Y. Yang, X. Su, D. Wang and Y. Chen, Rapid fabrication of metallic mechanism joints by selective laser melting, P. I. Mech. Eng. B-J. Eng. 225(12) (2011), 2249-2256
37. L.F. Nielsen, Elasticity and damping of porous materials and impregnated materials, J. Am. Ceram. Soc. 67(2) (1984), 93-98
38. M.F. Ashby and L.J. Gibson, Cellular Solids: Structures and Properties, Pergamon Press, 1998
39. B.V. Krishna, S. Bose and A. Bandyopadhyay, Low stiffness porous Ti structures for load-bearing implants, Acta Biomater. 3(6) (2007), 997-1006
40. C.Y. Lin, T. Wirtz, F. LaMarca and S.J. Hollister, Structural and mechanical evaluations of a topology optimized titanium interbody fusion cage fabricated by selective laser melting process, J. Biomed. Mater. Res. A 83(2) (2007), 272-279
41. H.A. Almeida and P.J.S. Bártolo, Virtual topological optimisation of scaffolds for rapid prototyping, Med. Eng. Phys. 32 (2010), 775-782
42. V. Karageorgiou and D. Kaplan, Porosity of 3D biomaterial scaffolds and osteogenesis, Biomaterials 26 (2005), 5474-5491
43. D.Wang, Y. Yang, X. Su and Y. Chen, Study on energy input and its influences on single-Track, multi-Track, and multi-layer in SLM, Int. J. Adv. Manuf. Technol. 54(9-12) (2011), 1-11
44. C.Y. Lin, N. Kikuchi and S.J. Hollister, A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity, J. Biomech. 37(5) (2004), 623-636
45. C.E. Misch, Z. Qu and M.W. Bidez, Mechanical properties of trabecular bone in the human mandible: Implications for dental implant treatment planning, and surgical placement, J. Oral Maxil. Surg. 57(6) (1999), 700-706
46. D.T. Reilly and A.H. Burstein, The elastic and ultimate properties of compact bone tissue, J. Biomech. 8 (1975), 393-405
47. S.F. Yang, K.F. Leong, Z.H. Du and C.K. Chua, The design of scaffolds for use in tissue engineering: Part 1-Traditional factors, Tissue Eng. 7(6) (2001), 679-690