Environmental analysis of milling machine tool use in various manufacturing environments

Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology, ISSST 2010

Volumn , Issue , 2010, Pages

  Diaz, Nancy ^a   Helu, Moneer ^a   Jayanathan, Stephen ^a   Chen, Yifen ^a   Horvath, Arpad ^b   Dornfeld, David ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b Berkeley   (United States)

Author keywords

Energy consumption; Environmental impact; Machine tools

Indexed keywords

BRIDGEPORT; COMMERCIAL FACILITIES; ENERGY CONSUMPTION; ENERGY CONSUMPTION ANALYSIS; ENERGY REDUCTION; ENVIRONMENTAL ANALYSIS; JOB SHOP; MACHINE TOOL DESIGN; MANUFACTURING ENVIRONMENTS; MORI SEIKI; USE PHASE;

FLEXIBLE MANUFACTURING SYSTEMS; MACHINE DESIGN; MACHINE TOOLS;

ENVIRONMENTAL IMPACT;

EID: 77955104977     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ISSST.2010.5507763     Document Type: Conference Paper

References (40)

1. "Annual energy review 2008," U.S. Energy Information Admin., Rep. DOE/EIA-0384(2008), 2008. Available: http://www.eia.doe.gov/emeu/aer/ consump.html.
2. T. Herzog, "World greenhouse gas emissions in 2005," World Resources Institute, 2005. Available: http://www.wri.org/chart/world-greenhouse- gas-emissions-2005.
3. rd ed. Menlo Park, CA: Addison, 1997, ch. 8.
4. "The 2009 world machine tool output and consumption survey," Metalworking Insider's Report, pp. 1-5, Feb. 10, 2009.
5. D. Dornfeld and D.-E. Lee, Precision Manufacturing. New York: Springer-Verlag, 2008, ch. 1-2.
6. G. Byrne and E. Scholta, "Environmentally clean machining processes - a strategic approach," Annals of the CIRP, vol. 42, no. 1, pp. 471-474, 1993.
7. K. Weinert, I. Inasaki, J. W. Sutherland, and T. Wakabayashi, "Dry machining and minimum quantity lubrication," Annals of the CIRP, vol. 53, no. 2, pp. 511-537, 2004.
8. th Machine Tool Engineerings Conf., 1997, pp. A2-3.
9. M. A. Ilgin and S. M. Gupta, "Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art," J. Environmental Management, vol. 91, pp. 563-591, 2010.
10. F. Jovane, L. Alting, A. Armillotta, W. Eversheim, K. Feldmann, G. Seliger, and N. Roth, "A key issue in product life cycle: disassembly," Annals of the CIRP, vol. 42, no. 2, pp. 651-655, 1993.
11. T. Harjula, B. Rapoza, W. A. Knight, G. Boothroyd, "Design for disassembly and the environment," Annals of the CIRP, vol. 45, no. 1, pp. 109-114, 1996.
12. th Int. Conf. on Machine Tool Engineering, 1996, pp. 245-257.
13. L. Alting and J. B. Legarth, "Life cycle engineering and design," Annals of the CIRP, vol. 44, no. 2, pp. 569-580, 1995.
14. A. A. Munoz and P. Sheng, "An analytical approach for determining the environmental impact of machining processes," J. Materials Processing Technology, vol. 53, pp. 736-758, 1995.
15. P. Sheng and M. Srinivasan, "Multi-objective process planning in environmentally conscious manufacturing: a feature based-approach," Annals of the CIRP, vol. 44, no. 1, pp. 433-437, 1995.
16. P. Sheng and M. Srinivasan, "Hierarchical part planning strategy for environmentally conscious machining," Annals of the CIRP, no. 45, no. 1, pp. 455-460, 1996.
17. P. Sheng, D. Bennet, S. Thurwachter, "Environmentally-based systems planning for machining," Annals of the CIRP, vol. 47, no. 1, pp. 409-414, 1998.
18. N. Krishnan and P. S. Sheng, "Environmental versus conventional planning for machined components," Annals of the CIRP, vol. 49, no. 1, pp. 363-366, 2000.
19. C. T. Hendrickson, A. Horvath, S. Joshi, and L. B. Lave, "Economic input-output models for environmental life-cycle assessment," Environmental Science & Technology, vol. 32, no. 4, pp. 184A-191A, 1998.
20. M. Shimoda, "LCA case of machine tool," in Proc. Symposium 2002 Japan Society for Precision Engineering Spring Annu. Meeting, pp. 37-41.
21. J. B. Dahmus and T. G. Gutowski, "An environmental analysis of machining," in Proc. 2004 ASME Int. Mechanical Engineering Congress and RD&D Expo, Anaheim, CA, Paper IMECE2004-62600.
22. M. Taniguchi, Y. Kakinuma, T. Aoyama, I. Inasaki, "Influences of downsized design for machine tools on the environmental impact," in Proc. Machine Tool Technology Research Fund 2006 Annu. Meeting, pp. 1-4.
23. H. Narita, H. Kawamura, T. Norihisa, L.-Y. Chen, H. Fujimoto, and T. Hasebe, "Development of prediction system for environmental burden for machine tool operation," JSME Int. J., vol. 49, no. 4, pp. 1188-1195, 2006.
24. st CIRP Conf. on Manufacturing Systems, 2008, pp. 65-68.
25. "Economic input-output life cycle assessment (EIO-LCA), US 1997 industry benchmark model," Carnegie Mellon University Green Design Institute, 2008. Available: http://www.eiolca.net.
26. M. F. Ashby, Materials and the Environment, Amsterdam: Butterworth-Heinemann, 2009, ch. 6, 12.
27. th CIRP Int. Conf. on Life Cycle Engineering, Leuven, Belgium, May 31-June 2, 2006.
28. K. R. Haapala, J. L. Rivera, and J. W. Sutherland, "Reducing environmental impacts of steel product manufacturing," Trans. North American Manufacturing Research Institution of the SME, vol. 37, pp. 419-426, 2009.
29. B. Baniszewski, "An environmental impact analysis of grinding," S.B. thesis, Dept. Mech. Eng., Massachusetts Institute of Technology, Cambridge, MA, 2005.
30. "Connecticut: 2010 state profile," Independent System Operators New England Inc., Holyoke, MA, 2010. Available: http://isonewengland.org/ nwsiss/grid-mkts/key-facts/ct-01-2010-profile.pdf.
31. V. M. Fthenakis and H. C. Kim, "Greenhouse-gas emissions from solar electric- and nuclear power: a life-cycle study," Energy Policy, vol. 35, no. 4, pp. 2549-2557, 2007.
32. S. Pacca and A. Horvath, "Greenhouse gas emissions from building and operating electric power plants in the Upper Colorado River Basin," Environmental Science & Technology, vol. 36, no. 14, pp. 3194-3200, 2002.
33. H. Hondo, "Life cycle GHG emission analysis of power generation systems: Japanese case," Energy, vol. 30, no. 11-12, pp. 2042-2056, 2005.
34. C. Facanha and A. Horvath, "Evaluation of life-cycle air emission factors of freight transportation," Environmental Science & Technology, vol. 41, no. 20, pp. 7138-7144, 2007.
35. "2003 Commercial buildings energy consumption survey," U.S. Energy Information Admin., 2003. Available: http://www.eia.doe.gov/emeu/cbecs/ cbecs2003/detailed-tables-2003/detailed-tables-2003.html.
36. M. Nyberg, "2008 net system power report," California Energy Commission, CEC-200-2009-010, 2009.
37. L. Gagnon, C. Bélanger, Y. Uchiyama, "Life-cycle assessment of electricity generation options: the status of research in year 2001," Energy Policy, vol. 30, no. 14, pp. 1267-1278, 2002.
38. P. Vieira and A. Horvath, "Assessing the end-of-life impacts of buildings," Environmental Science & Technology, vol. 42, no. 13, pp. 4663-4669, 2008.
39. J. Stokes and A. Horvath, "Energy and air emission effects of water supply," Environmental Science & Technology, vol. 43, no. 8, pp. 2680-2687, 2009.
40. B. Boughton and A. Horvath, "Environmental assessment of shredder residue management," Resources, Conservation and Recycling, vol. 47, no. 1, pp. 1-25, 2006.