Dimensional and hygroexpansive behaviors of cellulose microfibrils (MFs) from kraft pulp-based fibers as a function of relative humidity

Holzforschung

Volumn 66, Issue 8, 2012, Pages 1001-1008

  Lee, Jung Myoung ^a   Pawlak, Joel J ^a   Heitmann, John A ^a  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

Author keywords

atomic force microscopy (AFM); cellulose microfibrils (MF); dimensional changes; hygroexpansion

Indexed keywords

BLEACHED KRAFT PULPS; CELLULOSE MICROFIBRILS; CROSS SECTIONAL AREA; DIMENSIONAL CHANGES; HYGROEXPANSION; NEGATIVE CORRELATION; OUT-OF-PLANE DIRECTION; UNBLEACHED KRAFT PULPS;

ATMOSPHERIC HUMIDITY; ATOMIC FORCE MICROSCOPY; CELLULOSE DERIVATIVES; MATERIALS PROPERTIES;

KRAFT PULP;

CELLULOSE DERIVATIVES; FIBRILS; HUMIDITY; KRAFT PULPS;

EID: 84883090436     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/hf-2011-0129     Document Type: Article

References (45)

1. Alava, M., Niskanen, K. (2006) The physics of paper. Rep. Prog. Phys. 69:669-723. (Pubitemid 43306356)
2. Ampulski, R.S. (2001) Report of investigation reference materials 8495-northern softwood bleached kraft pulp. National Institute of Standards and Technology, Materials Measurement Laboratory.
3. Andreasson, B., Forsströ m, J., Wå gber, L. (2003) The porous structure of pulp fi bers with different yields and its infl uence on paper strength. Cellulose 10:111-123. (Pubitemid 36854844)
4. Bawden, A.D., Kibblewhite, R.P. (1997) Effects of multiple drying treatments on kraft fi bre walls. J. Pulp Pap. Sci. 23: J340-J346. (Pubitemid 127612207)
5. Bledzki, A.K., Gassan, J. (1999) Composites reinforced with cellulose base fi bres. Prog. Polym. Sci. 24:221-274.
6. Chen, W., Kickfield, G.G., Yang, C.Q. (2004) Molecular modeling of cellulose in amorphous state. Part I: model building and plastic deformation study. Polymer 45:1063-1071. (Pubitemid 38156003)
7. Clair, B., Alméras, T., Yamamoto, H., Okuyama, T., Sugiyama, J. (2006) Mechanical behavior of cellulose microfi brils in tension wood, in relation with maturation stress generation. Biophys. J. 91:1128-1135. (Pubitemid 44161944)
8. Dammströ m, S., Salmé n, L., Gatenholm, P. 2005 The effect of moisture on the dynamic mechanical properties of bacterial cellulose/ glucuronoxylan nanocomposites. Polymer 46, 10364-10371. (Pubitemid 41455267)
9. Duchesne, I., Hult, E.-L., Molin, U., Daniel, G., Iversen, T., Lennholm, H. (2001) The infl uence of hemicellulose on fi bril aggregation of kraft pulp fi bers as revealed by FE-SEM and CP/MAS 13 C-NMR. Cellulose 8:103-111. (Pubitemid 32949432)
10. Duchesne, I., Takabe, K., Daniel, G. (2003) Ultrastructural localisation of glucomannan in kraft pulp fi bres. Holzforschung 57:62-68.
11. Fahlé n, J., Salmé n, L. 2005 Pore and matrix distribution in the fi ber wall revealed by atomic force microscopy and image analysis. Biomacromolecules 6, 433-438.
12. Fengel, D., Wegener, G. (1989) Wood-Chemistry, Ultrastructure, Reactions. De Gruyter, Berlin, pp. 613.
13. Guhados, G., Wan, W., Hutter, J.L. (2005) Measurement of the elastic modulus of single bacterial cellulose fi bers using atomic force microscopy. Langmuir 21:6642-6646. (Pubitemid 41006484)
14. Hanley, S.J., Revol, J.-F., Godbout, L., Gray, D.G. (1997) Atomic force microscopy and transmission electron microscopy of cellulose from micrasterias denticulate ; evidence for a chiral helical microfi bril twist. Cellulose 4:209-220. (Pubitemid 127508793)
15. Hansma, H.G., Revenko, I., Kim, K., Laney, D.E. (1996) Atomic force microscopy of long and short double-stranded, singlestranded and triple-stranded nucleic acids. Nucleic Acids Res. 24:713-720. (Pubitemid 26085847)
16. Hon, D.N.-S. (1994) Cellulose: a random walk along its historical path. Cellulose 1:1-25.
17. Hult, E.-L., Larsson, P.T., Iversen, T. (2000) A Comparative CP/MAS 13 C-NMR study of cellulose structure in spruce wood and kraft pulp. Cellulose 7:35-55.
18. Kumaki, J., Hashimoto, T. (2003) Conformational change in an isolated single synthetic polymer chain on a mica surface observed by atomic force microscopy. J. Am. Chem. Soc. 125:4907-4917. (Pubitemid 36505383)
19. Kvien, I., Tanem, B.S., Oksman, K. (2005) Characterization of cellulose whiskers and their nanocomposites by atomic force and electron microscopy. Biomacromolecules 6:3160-3165. (Pubitemid 41764074)
20. Lawoko, M., Berggren, R., Berthold, F., Henriksson, G., Gellerstedt, G. (2004) Changes in the lignin-carbohydrate complex in softwood kraft pulping during kraft and oxygen delignifi cation. Holzforschung 58:603-610.
21. Lee, J.M., Heitmann, J.A., Pawlak, J.J. (2007a) Technique for the measurement of dimensional changes of natural microfi bril materials under variable humidity environments. Mat. Sci. Eng. A-Struct. 445-446:632-640. (Pubitemid 46024524)
22. Lee, J.M., Heitmann, J.A., Pawlak, J.J. (2007b) Local morphological and dimensional changes of enzyme-degraded cellulose materials measured by atomic force microscopy. Cellulose 14:643-653. (Pubitemid 350055465)
23. Lee, J.M., Pawlak, J.J., Heitmann, J.A. (2007c) Measurement of the dimensional stability of cellulose microfi brils-changes in measured length of cellulose microfi brils during sorption stages. 2007 International Paper Physics Conference, Queensland, Australia, pp. 333-339.
24. Lee, J.M., Pawlak, J.J., Heitmann, J.A. (2010a) Longitudinal and concurrent dimensional changes of cellulose aggregate fi brils during sorption stages. Mater. Charact. 61:507-517.
25. Lee, J.M., Jameel, H., Venditti, R.A. (2010b) Effect of ozone and autohydrolysis pretreatments on enzymatic digestibility of coastal Bermuda grass. Bioresources 5:1084-1101.
26. Mazeau, K., Heux, L. (2003) Molecular dynamics simulations of bulk native crystalline and amorphous structures of cellulose. J. Phys. Chem. B. 107:2394-2403.
27. Nakano, T., Sugiyama, J., Norimoto, M. (2000) Contractive force and transforming of microfi bril with aqueous sodium hydroxide solution for wood. Holzforschung 54:315-320. (Pubitemid 34044064)
28. Nanri, Y., Uesaka, T. (1993) Dimensional stability of mechanical pulps-drying shrinkage and hygroexpansivity. Tappi. J. 76:62-66.
29. Nyholm, K., Ander, P., Bardage, S., Daniel, G. (2001) Dislocations in pulp fi bres-their origin, characteristics and importance-a review. Nord. Pulp Pap. Res. J. 16:376-384. (Pubitemid 34099594)
30. O ' Sullivan, A.C. (1997) Cellulose: the structure slowly unravels. Cellulose 4:173-207. (Pubitemid 127508792)
31. Peura, M., Grotkopp, I., Lemke, H., Vikkula, A., Laine, J., Mü ller, M., Serimaa, R. (2006) Negative Poisson ratio of crystalline cellulose in kraft cooked Norway spruce. Biomacromolecules 7:1521-1528. (Pubitemid 43811208)
32. Piantanida, G., Bicchieri, M., Coluzza, C. (2005) Atomic force microscopy characterization of the ageing of pure cellulose paper. Polymer 46:12312-12321.
33. Sakurada, I., Nukushina, Y., Ito, T. (1962) Experimental determination of the elastic modulus of crystalline regions in oriented polymers. J. Polym. Sci. 57:651-660.
34. Salmén, L. (1993) Responses of paper properties to changes in moisture content and temperature. In: Products of Papermaking. Eds. Baker, C.F. Transactions of the tenth fundamental research symposium held at Oxford, Pira International, Leatherhead 1:369-430.
35. Salmén, L., Burgert, I. (2009) Cell wall features with regard to mechanical performance. A review. COST Action E35 2004-2008: wood machining-micromechanics and fracture. Holzforschung 63:121-129.
36. Samir, M.A.S.A., Alloin, F., Dufresne, A. (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposites field. Biomacromolecules 6:612-626. (Pubitemid 40467801)
37. Sheiko, S.S., Möller, M. (2001) Visualization of macromolecules-a fi rst step to manipulation and controlled response. Chem. Rev. 101:4099-4123. (Pubitemid 35373054)
38. Stenberg, N., Fellers, C. (2002) Out-of-plane Poisson ' s ratio of paper and paperboard. Nord. Pulp Pap. Res. J. 17:387-394.
39. Stevanic, J.S., Salmén, L. (2009) Orientation of the wood polymers in the cell wall of spruce wood fi bres. Holzforschung 63:497-503.
40. Stöckmann, V.E. 1970) On the kinetic tensile force in elementary fi brils. In The Physics and Chemistry of Wood Pulp Fibers. Ed. Page, D.H. Technical Association of the Pulp and Paper Industry, New York 159-165.
41. Stöckmann, V.E. (1971a) Effect of pulping on cellulose structure; Part I. A hypothesis of transformation of fi brils. Tappi. J. 54:2033-2037.
42. Stöckmann, V.E. (1971b) Effect of pulping on cellulose structure; Part II. Fibrils contract longitudinally. Tappi. J. 54:2038-2045.
43. Stone, J.E., Scallan, A.M. (1967) The effect of component removal upon the porous structure of the cell wall of wood. II. Swelling in water and the fi ber saturation point. Tappi. J. 50:496-501.
44. Sudesh, K., Gan, Z., Matsumoto, K., Doi, Y. (2002) Direct observation of polyhydroxyalkanoate chains by atomic force microscopy. Ultramicroscopy 91:157-164. (Pubitemid 34831631)
45. Zhang, D., Pu, Y., Chai, X.-S., Naithani, V., Jameel, H., Ragauskas, A.J. (2006) Elucidating carboxylic acid profi les for extended oxygen delignifi cation of high-kappa softwood kraft pulps. Holzforschung 60:123-129. (Pubitemid 43383300)