Melt spinning of poly(lactic acid) and hydroxyapatite composite fibers: Influence of the filler content on the fiber properties

ACS Applied Materials and Interfaces

Volumn 5, Issue 15, 2013, Pages 6864-6872

  Persson, Maria ^a,b   Lorite, Gabriela S ^b   Cho, Sung Woo ^a   Tuukkanen, Juha ^b   Skrifvars, Mikael ^a  

^a UNIVERSITY OF BORÅS   (Sweden)

^b UNIVERSITY OF OULU   (Finland)

Author keywords

fiber morphology; hydroxyapatite; mechanical properties; melt spinning; poly(lactic acid); thermal properties

Indexed keywords

BIOMEDICAL TEXTILES; COMPOSITE FIBERS; FIBER MORPHOLOGY; HYDROXYAPATITE COMPOSITE; LOADING CONCENTRATION; POLY LACTIC ACID; POLYLACTIC ACIDS; THERMAL AND MECHANICAL PROPERTIES;

ATOMIC FORCE MICROSCOPY; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HYDROXYAPATITE; LACTIC ACID; MECHANICAL PROPERTIES; MELT SPINNING; MORPHOLOGY; SCANNING ELECTRON MICROSCOPY; THERMODYNAMIC PROPERTIES;

FIBERS;

HYDROXYAPATITE; LACTIC ACID; POLYLACTIC ACID; POLYMER;

ATOMIC FORCE MICROSCOPY; BIOREMEDIATION; CHEMISTRY; DIFFERENTIAL SCANNING CALORIMETRY; FREEZING; HEAT; INFRARED SPECTROSCOPY; MATERIALS TESTING; MECHANICAL STRESS; PROCEDURES; SCANNING ELECTRON MICROSCOPY; TEMPERATURE; TENSILE STRENGTH; THERMOGRAVIMETRY; TISSUE ENGINEERING; VISCOSITY; ARTICLE; METHODOLOGY;

BIODEGRADATION, ENVIRONMENTAL; CALORIMETRY, DIFFERENTIAL SCANNING; DURAPATITE; FREEZING; HOT TEMPERATURE; LACTIC ACID; MATERIALS TESTING; MICROSCOPY, ATOMIC FORCE; MICROSCOPY, ELECTRON, SCANNING; POLYMERS; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; STRESS, MECHANICAL; TEMPERATURE; TENSILE STRENGTH; THERMOGRAVIMETRY; TISSUE ENGINEERING; VISCOSITY;

EID: 84882744197     PISSN: 19448244     EISSN: 19448252     Source Type: Journal    
DOI: 10.1021/am401895f     Document Type: Article

References (41)

1. Armentano, I.; Dottori, M.; Fortunati, E.; Mattioli, S.; Kenny, J. Polym. Degrad. Stab. 2010, 95, 2126-2146
2. Jagur-Grodzinski, J. Polym. Adv. Technol. 2006, 17, 395-418
3. Wei, G.; Ma, P. X. Biomaterials 2004, 25, 4749-4757
4. Ma, P. X. In Encyclopedia of Polymer Science and Technology; John Wiley & Sons, Inc.: New York, 2002; Vol. 12, pp 262-291.
5. Shoichet, M. S. Macromolecules 2009, 43, 581-591
6. Montjovent, M. O.; Mathieu, L.; Hinz, B.; Applegate, L. L.; Bourban, P. E.; Zambelli, P. Y.; Månson, J. A.; Pioletti, D. P. Tissue Eng. 2005, 11, 1640-1649
7. Roether, J.; Gough, J.; Boccaccini, A. R.; Hench, L.; Maquet, V.; Jéroîme, R. J. Mater. Sci., Mater. Med. 2002, 13, 1207-1214
8. Deville, S.; Saiz, E.; Tomsia, A. P. Biomaterials 2006, 27, 5480-5489
9. Kothapalli, C. R.; Shaw, M. T.; Wei, M. Acta Biomater. 2005, 1, 653-662
10. Maquet, V.; Boccaccini, A. R.; Pravata, L.; Notingher, I.; Jéroîme, R. Biomaterials 2004, 25, 4185-4194
11. Kim, H. W.; Lee, H. H.; Knowles, J. J. Biomed. Mater. Res., Part A 2006, 79, 643-649
12. Sui, G.; Yang, X.; Mei, F.; Hu, X.; Chen, G.; Deng, X.; Ryu, S. J. Biomed. Mater. Res., Part A 2007, 82, 445-454
13. Jeong, S. I.; Ko, E. K.; Yum, J.; Jung, C. H.; Lee, Y. M.; Shin, H. Macromol. Biosci. 2008, 8, 328-338
14. Zhou, C.; Shi, Q.; Guo, W.; Terrell, L.; Qureshi, A.; Hayes, D. J.; Wu, Q. ACS Appl. Mater. Interfaces 2013, 5, 3847-3854
15. Moutos, F. T.; Freed, L. E.; Guilak, F. Nat. Mater. 2007, 6, 162-167
16. Liu, X.; Ma, P. X. Ann. Biomed. Eng. 2004, 32, 477-486
17. Gupta, B.; Revagade, N.; Hilborn, J. Prog. Polym. Sci. 2007, 32, 455-482
18. Chen, Y.; Mak, A. F. T.; Wang, M.; Li, J.; Wong, M. J. Mater. Sci., Mater. Med. 2008, 19, 2261-2268
19. Liu, X.; Won, Y.; Ma, P. X. J. Biomed. Mater. Res., Part A 2005, 74, 84-91
20. Rizzi, S. C.; Heath, D.; Coombes, A. G. A.; Bock, N.; Textor, M.; Downes, S. J. Biomed. Mater. Res., Part A 2001, 55, 475-486
21. Bleach, N.; Tanner, K.; Kellomäki, M.; Törmälä, P. J. Mater. Sci., Mater. Med. 2001, 12, 911-915
22. Lee, S. H.; Youn, J. R. J. Appl. Polym. Sci. 2008, 109, 1221-1231
23. Solarski, S.; Ferreira, M.; Devaux, E. Polym. Degrad. Stab. 2008, 93, 707-713
24. Aydin, E.; Planell, J. A.; Hasirci, V. J. Mater. Sci., Mater. Med. 2011, 1-15
25. Lee, K. Y.; Blaker, J. J.; Bismarck, A. Compos. Sci. Technol. 2009, 69, 2724-2733
26. Dorgan, J. R.; Janzen, J.; Knauss, D. M.; Hait, S. B.; Limoges, B. R.; Hutchinson, M. H. J. Polym. Sci., Part B: Polym. Phys. 2005, 43, 3100-3111
27. Garlotta, D. J. Polym. Environ. 2001, 9, 63-84
28. Cui, Y.; Liu, Y.; Cui, Y.; Jing, X.; Zhang, P.; Chen, X. Acta Biomater. 2009, 5, 2680-2692
29. Yanagida, H.; Okada, M.; Masuda, M.; Ueki, M.; Narama, I.; Kitao, S.; Koyama, Y.; Furuzono, T.; Takakuda, K. J. Biosci. Bioeng. 2009, 108, 235-243
30. Lorite, G. S.; Janissen, R.; Clerici, J. H.; Rodrigues, C. M.; Tomaz, J. P.; Mizaikoff, B.; Kranz, C.; de Souza, A. A.; Cotta, M. A. Submitted in 2013.
31. Liu, D.; Martin, J.; Burnham, N. Appl. Phys. Lett. 2007, 91, 043107-043107-3
32. Persson, M.; Cho, S.; Skrifvars, M. J. Mater. Sci. 2013, 48, 3055-3066
33. Taubner, V.; Shishoo, R. J. Appl. Polym. Sci. 2001, 79, 2128-2135
34. Lim, L. T.; Auras, R.; Rubino, M. Prog. Polym. Sci. 2008, 33, 820-852
35. Bikiaris, D. Thermochim. Acta 2011, 523, 25-45
36. Chen, D.; Tang, C.; Chan, K.; Tsui, C.; Yu, P. H. F.; Leung, M. C. P.; Uskokovic, P. Compos. Sci. Technol. 2007, 67, 1617-1626
37. Wilberforce, S. I. J.; Finlayson, C. E.; Best, S. M.; Cameron, R. E. Polymer 2011, 52, 2883-2890
38. Wei, J.; Sun, J.; Wang, H.; Chen, X.; Jing, X. Chin. J. Polym. Sci. 2010, 28, 499-507
39. Wilberforce, S. I. J.; Finlayson, C. E.; Best, S. M.; Cameron, R. E. Acta Biomater. 2011, 7, 2176-2184
40. Kim, M. S.; Kim, J. C.; Kim, Y. H. Polym. Adv. Technol. 2008, 19, 748-755
41. Hong, Z.; Zhang, P.; He, C.; Qiu, X.; Liu, A.; Chen, L.; Chen, X.; Jing, X. Biomaterials 2005, 26, 6296-6304