Freeze casting of hydroxyapatite scaffolds for bone tissue engineering

Biomaterials

Volumn 27, Issue 32, 2006, Pages 5480-5489

  Deville, Sylvain ^a   Saiz, Eduardo ^a   Tomsia, Antoni P ^a  

^a LAWRENCE BERKELEY NATIONAL LABORATORY   (United States)

Author keywords

Bone tissue engineering; Ceramic structure; Freeze casting; Hydroxyapatite; Porosity

Indexed keywords

BONE TISSUE ENGINEERING; CERAMIC STRUCTURE; FREEZE CASTING;

BIOMATERIALS; BONE; CERAMIC MATERIALS; POROSITY; SCAFFOLDS; TISSUE CULTURE;

HYDROXYAPATITE;

HYDROXYAPATITE;

ARTICLE; BONE PROSTHESIS; BONE TISSUE; CERAMIC PROSTHESIS; COMPRESSIVE STRENGTH; CONCENTRATION (PARAMETERS); POROSITY; PRIORITY JOURNAL; SYNTHESIS; TISSUE ENGINEERING;

BONE AND BONES; COLD; COLD TEMPERATURE; DURAPATITE; FREEZING; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; POROSITY; TENSILE STRENGTH; TISSUE ENGINEERING; X-RAY DIFFRACTION;

EID: 33746798218     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biomaterials.2006.06.028     Document Type: Article

References (61)

1. Suchanek W., and Yoshimura M. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants. J Mater Res 13 1 (1998) 94-117
2. Deville S., Saiz E., Nalla R.K., and Tomsia A. Freezing as a path to build complex composites. Science 311 (2006) 515-518
3. Almirall A., Larrecq G., Delgado J.A., Martinez S., Planell J.A., and Ginebra M.P. Fabrication of low temperature macroporous hydroxyapatite scaffolds by foaming and hydrolysis of an alpha-TCP paste. Biomaterials 25 17 (2004) 3671-3680
4. Charriere E., Lemaitre J., and Zysset P. Hydroxyapatite cement scaffolds with controlled macroporosity: fabrication protocol and mechanical properties. Biomaterials 24 5 (2003) 809-817
5. del Real R.P., Wolke J.G.C., Vallet-Regi M., and Jansen J.A. A new method to produce macropores in calcium phosphate cements. Biomaterials 23 17 (2002) 3673-3680
6. Kawata M., Uchida H., Itatani K., Okada I., Koda S., and Aizawa M. Development of porous ceramics with well-controlled porosities and pore sizes from apatite fibers and their evaluations. J Mater Sci Mater Med 15 7 (2004) 817-823
7. Milosevski M., Bossert J., Milosevski D., and Gruevska N. Preparation and properties of dense and porous calcium phosphate. Ceram Int 25 8 (1999) 693-696
8. Ramay H.R., and Zhang M.Q. Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods. Biomaterials 24 19 (2003) 3293-3302
9. Tian J., and Tian J. Preparation of porous hydroxyapatite. J Mater Sci 36 12 (2001) 3061-3066
10. Fukasawa T., Deng Z.Y., Ando M., Ohji T., and Goto Y. Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process. J Mater Sci 36 10 (2001) 2523-2527
11. Kang H.-W., Tabata Y., and Ikada Y. Fabrication of porous gelatin scaffolds for tissue engineering. Biomaterials 20 14 (1999) 1339-1344
12. Madihally S.V., and Matthew H.W.T. Porous chitosan scaffolds for tissue engineering. Biomaterials 20 12 (1999) 1133-1142
13. Huang Y., Onyeri S., Siewe M., Moshfeghian A., and Madihally S.V. In vitro characterization of chitosan-gelatin scaffolds for tissue engineering. Biomaterials 26 36 (2005) 7616-7627
14. Schoof H., Bruns L., Fischer A., Heschel I., and Rau G. Dendritic ice morphology in unidirectionally solidified collagen suspensions. J Cryst Growth 209 1 (2000) 122-129
15. Zhang R., and Ma P.X. Poly([alpha]-hydroxyl acids)/hydroxyapatite porous composites for bone- tissue engineering. I. Preparation and morphology. J Biomed Mater Res 44 4 (1999) 446-455
16. Ho M.-H., Kuo P.-Y., Hsieh H.-J., Hsien T.-Y., Hou L.-T., Lai J.-Y., et al. Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods. Biomaterials 25 1 (2004) 129-138
17. Maquet V., Boccaccini A.R., Pravata L., Notingher I., and Jerome R. Porous poly([alpha]-hydroxyacid)/Bioglass(R) composite scaffolds for bone tissue engineering. I: preparation and in vitro characterisation. Biomaterials 25 18 (2004) 4185-4194
18. Oxley H.R., Corkhill P.H., Fitton J.H., and Tighe B.J. Macroporous hydrogels for biomedical applications: methodology and morphology. Biomaterials 14 14 (1993) 1064-1072
19. Stokols S., and Tuszynski M.H. The fabrication and characterization of linearly oriented nerve guidance scaffolds for spinal cord injury. Biomaterials 25 27 (2004) 5839-5846
20. Tao W., Li M.Z., and Xie R.J. Preparation and structure of porous silk sericin materials. Macromol Mater Eng 290 3 (2005) 188-194
21. Shapiro L., and Cohen S. Novel alginate sponges for cell culture and transplantation. Biomaterials 18 8 (1997) 583-590
22. Zmora S., Glicklis R., and Cohen S. Tailoring the pore architecture in 3-D alginate scaffolds by controlling the freezing regime during fabrication. Biomaterials 23 20 (2002) 4087-4094
23. Chung T.W., Yang J., Akaike T., Cho K.Y., Nah J.W., Kim S.I., et al. Preparation of alginate/galactosylated chitosan scaffold for hepatocyte attachment. Biomaterials 23 14 (2002) 2827-2834
24. Tampieri A., Sandri M., Landi E., Celotti G., Roveri N., Mattioli-Belmonte M., et al. HA/alginate hybrid composites prepared through bio-inspired nucleation. Acta Biomater 1 3 (2005) 343-351
25. An Y.H. Mechanical properties of bone. Mechanical testing of bone and the bone-implant interface (2000), CRC Press, Boca Raton p. 41-63
26. Currey JD. In: A. Kelly STM, editor. Handbook of composites. Amsterdam: B.V. Elsevier Science Publisher; 1983. p. 501.
27. Fung Y.C. Biomechanics. Mechanical properties of living tissues (1993), Spinger, New York p. 500
28. Ioku K., Yanagisawa K., Yamasaki N., Kurosawa H., Shibuya K., and Yokozeki H. Preparation and characterization of porous apatite ceramics coated with beta-tricalcium phosphate. Biomed Mater Eng 3 3 (1993) 137-145
29. Landi E., Celotti G., Logroscino G., and Tampieri A. Carbonated hydroxyapatite as bone substitute. J Eur Ceram Soc 23 15 (2003) 2931-2937
30. Liu D.M. Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic. Ceram Int 23 2 (1997) 135-139
31. 3)(2) fiber skeletons. J Am Ceram Soc 80 1 (1997) 225-231
32. Ramay H.R.R., and Zhang M. Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering. Biomaterials 25 21 (2004) 5171-5180
33. Sous M., Bareille R., Rouais F., Clement D., Amedee J., Dupuy B., et al. Cellular biocompatibility and resistance to compression of macroporous beta-tricalcium phosphate ceramics. Biomaterials 19 23 (1998) 2147-2153
34. Bignon A. Optimization of the porous structure of calcium phosphate implants for bone substitutes and in situ release of active principles [PhD] (2002), National Institute of Applied Science, Lyon
35. Pilliar R.M., Filiaggi M.J., Wells J.D., Grynpas M.D., and Kandel R.A. Porous calcium polyphosphate scaffolds for bone substitute applications-in vitro characterization. Biomaterials 22 9 (2001) 963-972
36. Barralet J.E., Grover L., Gaunt T., Wright A.J., and Gibson I.R. Preparation of macroporous calcium phosphate cement tissue engineering scaffold. Biomaterials 23 15 (2002) 3063-3072
37. Tancred D.C., McCormack B.A.O., and Carr A.J. A synthetic bone implant macroscopically identical to cancellous bone. Biomaterials 19 24 (1998) 2303-2311
38. Jian Dong H.K., Toshimasa U., Masanori K., Tetsuya T., and Junzo T. In vivo evaluation of a novel porous hydroxyapatite to sustain osteogenesis of transplanted bone marrow-derived osteoblastic cells. J Biomed Mater Res 57 2 (2001) 208-216
39. Chu T.-M.G., Orton D.G., Hollister S.J., Feinberg S.E., and Halloran J.W. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials 23 5 (2002) 1283-1293
40. Benaqqa C., Chevalier J., Saadaoui M., and Fantozzi G. Slow crack growth behaviour of hydroxyapatite ceramics. Biomaterials 26 31 (2005) 6106-6112
41. Lu H., Qu Z., and Zhou Y. Preparation and mechanical properties of dense polycrystalline hydroxyapatite through freeze-drying. J Mater Sci Mater Med 9 10 (1998) 583-587
42. Hunt J.D. Pattern formation in solidification. Mater Sci Tech 15 9 (1999) 9-14
43. Asthana R., and Tewari S.N. Review-The engulfment of foreign particles by a freezing interface. J Mater Sci 28 (1993) 5414-5425
44. Korber C., Rau G., Cosman M.D., and Cravalho E.G. Interaction of particles and a moving ice-liquid interface. J Cryst Growth 72 (1985) 649-662
45. Klawitter J.J., and Hulbert S.F. Application of porous ceramics for the attachment of load bearing internal orthopedic applications. J Biomed Mater Res 2 (1971) 161-229
46. Simske S.J., Ayers R.A., and Bateman T.A. Porous materials for bone engineering, in porous materials for tissue engineering. In: Dixit D.-M. (Ed). Porous materials for tissue engineering (1997), Transtech, Enfield, NH 151-182
47. Itala A.I., Ylanen H.O., Ekholm C., Karlsson K.H., and Aro H.T. Pore diameter of more than 100 μm is not requisite for bone ingrowth in rabbits. J Biomed Mater Res 58 6 (2001) 679-683
48. Tithi Dutta Roy J.L.S., Ricci J.L., Dianne Rekow E., Thompson V.P., and Russell Parsons J. Performance of degradable composite bone repair products made via three-dimensional fabrication techniques. J Biomed Mater Res 66A 2 (2003) 283-291
49. Tamai N., Myoui A., Tomita T., Nakase T., Tanaka J., Ochi T., et al. Novel hydroxyapatite ceramics with an interconnective porous structure exhibit superior osteoconduction in vivo. J Biomed Mater Res 59 1 (2002) 110-117
50. Chang B.S., Lee C.K., Hong K.S., Youn H.J., Ryu H.S., Chung S.S., et al. Osteoconduction at porous hydroxyapatite with various pore configurations. Biomaterials 21 12 (2000) 1291-1298
51. Tsuruga E., Takita H., Itoh H., Wakisaka Y., and Kuboki Y. Pore size of porous hydroxyapatite as the cell-substratum controls BMP-induced osteogenesis. J Biochem 121 2 (1997) 317-324
52. Pilliar R.M., Filiaggi M.J., Wells J.D., Grynpas M.D., and Kandel R.A. Porous calcium polyphosphate scaffolds for bone substitute applications-in vitro characterization. Biomaterials 22 9 (2001) 963-972
53. Flautre B., Descamps M., Delecourt C., Blary M.C., and Hardouin P. Porous HA ceramic for bone replacement: role of the pores and interconnections-experimental study in the rabbit. J Mater Sci Mater Med 12 8 (2001) 679-682
54. Zhu B., Zhang Q., Lu Q., Xu Y., Yin J., Hu J., et al. Nanotopographical guidance of C6 glioma cell alignment and oriented growth. Biomaterials 25 18 (2004) 4215-4223
55. Yu T.T., and Shoichet M.S. Guided cell adhesion and outgrowth in peptide-modified channels for neural tissue engineering. Biomaterials 26 13 (2005) 1507-1514
56. Recknor J.B., Recknor J.C., Sakaguchi D.S., and Mallapragada S.K. Oriented astroglial cell growth on micropatterned polystyrene substrates. Biomaterials 25 14 (2004) 2753-2767
57. Patist C.M., Mulder M.B., Gautier S.E., Maquet V., Jerome R., and Oudega M. Freeze-dried poly(d,l-lactic acid) macroporous guidance scaffolds impregnated with brain-derived neurotrophic factor in the transected adult rat thoracic spinal cord. Biomaterials 25 9 (2004) 1569-1582
58. Miller C., Shanks H., Witt A., Rutkowski G., and Mallapragada S. Oriented Schwann cell growth on micropatterned biodegradable polymer substrates. Biomaterials 22 11 (2001) 1263-1269
59. Manwaring M.E., Walsh J.F., and Tresco P.A. Contact guidance induced organization of extracellular matrix. Biomaterials 25 17 (2004) 3631-3638
60. Mahoney M.J., Chen R.R., Tan J., and Mark Saltzman W. The influence of microchannels on neurite growth and architecture. Biomaterials 26 7 (2005) 771-778
61. Anselme K. Osteoblast adhesion on biomaterials. Biomaterials 21 7 (2000) 667-681