Detailed evaluation of a new semi-empirical two-zone nox model by application on various diesel engine configurations

Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division

Volumn , Issue , 2012, Pages 727-743

  Provataris, Stelios ^a   Savva, Nicholas ^a   Hountalas, Dimitrios ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

DIESEL ENGINES; FORECASTING; NEURAL NETWORKS; NITROGEN OXIDES;

ACCURATE ESTIMATION; DI DIESEL ENGINE; ENGINE CONFIGURATION; HEAVY DUTY; MODELING APPROACH; NO X; NO X EMISSION; OPERATING PARAMETERS; PHYSICALLY BASED; SEMI-EMPIRICAL;

COMBUSTION CHAMBERS;

EID: 84882732149     PISSN: 15296598     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/ICES2012-81101     Document Type: Conference Paper

References (48)

1. Gartner U., Hohenberg G., Daudel H., and Oelschlegel H., "Development and Application of a Semi - Empirical NOx Model to Various HD Diesel Engines,", in Thiesel 2002 Conference on thermo and Fluid Dynamic Processes in Diesel Engines, Valencia, Spain, 2002.
2. Arsie I., Caraceni A., Cioffi P., Genova F., Flauti G., Pianese C., Rizzo G., and Sorrentino M., "A Single-Zone Model for Combustion and NOx Simulation in Common-Rail Multi-Jet Diesel Engines,", in 6th International Conference on Engines for Automobile, 2003.
3. Cakir H., "Nitric Oxide Formation in Diesel Engines,", in IMechE, Vol. 188, pp. 477-483, 1974, doi: 10.1243/PIME-PROC-1974-188-057-02.
4. Ishida M., Ueki H., Matsumura N., Yumaguchi M., and Luo G.F., "Diesel Combustion Analysis Based on Two-Zone analysis (Comparison between Model Analysis and Experiment),", JSME, Vol. 39, no. 1, pp. 185-192, 1996, ISSN: 13408054.
5. Wilhelmsson C., Tunestal P., Johansson B., Widd A., and Johansson R., "A Physical Two-Zone NOx Model Intended for Embedded Implementation,", SAE paper, 2009, doi: 10.4271/2009-01-1509.
6. Kouremenos D.A., Rakopoulos C.D., and Hountalas D.T., "Multi-Zone Combustion Modeling for the Prediction of Pollutants Emissions and Performance of Di Diesel Engines,", SAE paper, 1997, doi: 10.4271/970635.
7. Jung D. and Assanis D.N., "Multi-zone DI diesel spray combustion model for cycle simulation studies of engine performance and emissions,", SAE paper, 2001, doi: 10.4271/2001-01-1246.
8. Baratta M., Catania A.E., Ferrari A., Finesso R., and Spessa E., "Premixed-Diffusive Multizone Model for Combustion Diagnostics in Conventional and PCCI Diesel Engines,", ASME Transactions, Journal of Engineering for Gas Turbines and Power, Vol. 133, no. 10, 2011, doi: 10.1115/1.4003048.
9. Reitz R.D. and Rutland C.J., "Development and Testing of Diesel Engine CFD Models,", Prog. Energy Cumbust. Sci., Vol. 21, no. 2, pp. 173-196, 1995, doi: 10.1016/0360-1285(95)00003-Z.
10. Hountalas D.T., Savva N., and Papagiannakis R.G., "Development of a New Physically Based Semi-Empirical NOx Model Using the Measured Cylinder Pressure,", in THIESEL 2010 Conference on Thermo-and Fluid Dynamic Processes in Diesel Engines, Valencia, Spain, pp. 341-356, Sept. 14-17, 2010.
11. Andersson M., Johansson B., Hultqvist A., and Nohre C., "A Predictive Real Time NOx Model for Conventional and Partially Premixed Diesel Combustion,", SAE paper, Journal of Engines, 2006, doi: 10.4271/2006-01-3329.
12. Timoney D. J., Desantes J. M., Harnandez L., and Lyons C. M., "The development of a semi-empirical model for rapid NOx concentrations evaluation using measured in cylinder pressure in Diesel engines,", IMechE, Part D: J. Automobile Engineering, Vol. 219, 2005, doi: 10.1243/095440705X11095.
13. Arrègle J., López J., Guardiola C., and Monin C., "Sensitivity Study of a NOx Estimation Model for OnBoard Applications,", SAE Technical paper, 2008, doi: 10.4271/2008-01-0640.
14. Heywood J.B., Internal Combustion Engine Fundamentals. New York: McGraw-Hill, 1988.
15. Ramos J.I., Internal Combustion Engine Modeling. New York: Hemisphere, 1989.
16. Rakopoulos CD., Antonopoulos K.A., and Rakopoulos D.C., "Experimental heat release analysis and emissions of a HSDI diesel engine fueled with ethanol-diesel fuel blends,", J. Energy, Vol. 32, no. 10, pp. 1791-1808, Oct. 2007, doi: 10.1016/j.energy.2007.03.005.
17. Katrašnik T., Trenc F., and Oprešnik S.R., "A New Criterion to Determine the Start of Combustion in Diesel Engines,", In ASME, Vol. 128, pp. 928-933, Oct. 2006, doi: 10.1115/1.2179471.
18. Rakopoulos CD., Hountalas D.T., Tzanos E.I., and Taklis G.N., "A fast algorithm for calculating the composition of diesel combustion products using an eleven species chemical equilibrium scheme,", Advances in Engng Software, Vol. 19, no. 2, pp. 109-119, 1994, doi: 10.1016/0965-9978(94)90064-7.
19. Vickland C.W., Strange F.M., Bell R.A., and Starkman E.S., "A consideration of the high temperature thermodynamics of internal combustion engines,", SAE International, 1962, doi: 10.4271/620564.
20. Way R. J.B., "Methods for determination of composition and thermodynamic properties of combustion products for internal combustion engine calculation,", in Proc. Instn. Mech. Engrs, Vol. 190, pp. 687-697, 1976, doi: 10.1243/PIME-PROC-1976-190-073-02.
21. Lavoie G.A., Heywood J.B., and Keck J.C, "Experimental and theoretical study of nitric oxide formation in internal combustion engines,", Combustion Science and Technology, Vol. 1, pp. 313-326, 1970.
22. Zeldovich Y.B., "The Oxidation of Nitrogen in Combustion and Explosions,", Acta Physiochimica USSR, Vol. 21, pp. 577-628, 1946.
23. Zeldovich Y.B., Sadonikov P.Y., and Frank-Kamenetskii D.A., "Oxidation of nitrogen in combustion,", Academy of Sciences USSR, 1947.
24. Benson R.S. and Whitehouse N.D., Internal combustion engines. Oxford: Pergamon, 1979.
25. McBride B.J., Zehe M.J., and Gordon S., "NASA Glenn Coefficients for Calculating Thermodynamic Properties of Individual Spesies,", NASA, Cleveland, Ohio, NASA/TP - 2002-211556, 2002.
26. Annand W. J.D., "Heat transfer in the cylinders of reciprocating internal combustion engines,", Proc. Inst. Mech. Engrs, Vol. 177, pp. 973-990, 1963, doi: 10.1243/PIME-PROC-1963-177-069-02.
27. Annand W.J.D., "Instantaneous Heat Transfer Rates to the Cylinder Head Surface of a Small Compression-Ignition Engine,", in Proc. of the Inst. of Mech. Engin., Vol. 185, pp. 976-987, 1970, doi: 10.1243/PIME-PROC-1970- 185-110-02.
28. Heywood J.B. and Sher E., The Two-Stroke Cycle Engine.: Taylor & Francis, 1999.
29. Roger A.S., "Transport Coefficients for the NASA Lewis Chemical Equilibrium Program,", NASA, Cleveland, Ohaio, 1995.
30. TEMA, Standards of the Tubular Exchanger Manufacturers Association, 7th ed. New York, 10591, USA, 1988.
31. Katz D.L., Handbook of Natural Gass Engineering. New York: McGraw-Hill, 1959.
32. Arsie I., Pianese C., and Rizzo G., "Cylinder Thermal State Detection from Pressure Cycle in SI Engine,", in International Conference on Internal Combustion Engines: Experiments and Modeling, Capri, 1999, ISBN 88-900399-06.
33. Anatone M. and Cipollone R., "Contribution in Calculating the Thermal Fields in Internal Combustion Engines Components,", SAE paper, 1996, doi: 10.4271/961127.
34. Ferguson R.C., Internal Combustion Engines. New York: J. Wiley, 1986.
35. Eckert E.R.G. and Drake Jr. Robert M., Analysis os Heat and Mass Transfer.: Hemisphere Publishing Corporation, 1989, ISBN 0-89116-553-3.
36. Cengel Y.A. and Boles M., Thermodynamics - An Engineering Approach.: McGraw-Hill, 2006.
37. Hountalas D.T., Kouremenos D.A., Binder K.B., Raab A., and Schnabel M.H., "Using advanced injection timing and EGR to improve DI diesel engine efficiency at acceptable NO and Soot levels,", SAE Technical Paper, 2001, doi: 10.4271/2001-01-0199.
38. Hanson R.K. and Salimian S., "Survey of Rate Constants in H/N/O Systems,", Combustion Chemistry, p. 341, 1984.
39. Hamming R.W., Numerical Methods for Scientists and Engineers, Sec. Edition. New York: Dover Publications, 1962, 1973.
40. Rakopoulos C.D. and Hountalas D.T., "Development and Validation of a 3-D Multi-Zone Combustion Model for the Prediction of a DI Diesel Engines Performance and Pollutants Emissions,", SAE Transactions, Journal of Engines, Vol. 107, pp. 1413-1429, 1998, doi: 10.4271/981021.
41. Rakopoulos C.D., Hountalas D.T., Taklis G.N., and Tzanos E.I., "Analysis of combustion and pollutants formation in a direct injection diesel engine using a multi-zone model,", Energy Res., Vol. 19, no. 1, pp. 63-88, 1995, doi: 10.1002/er.4440190109.
42. Ladommatos N., Abdelhalim S.M., Zhao H., and Hu Z., "The Dilution, Chemical, and Thermal Effects of Exhaust Gas Recirculation on Diesel Engine Emissions,", SAE Paper, 1996, doi: 10.4271/961165.
43. Herzog P.L., Bürgler L., Winklhofer E., Zelenka P., and Cartellieri W., "NOx Reduction Strategies for DI Diesel Engines,", SAE Technical Paper, 1992, doi: 10.4271/920470.
44. Benajes J., Molina S., García M.J., and Novella R., "Influence of Boost Pressure and Injection Pressure on Combustion Process and Exhaust Emissions in a HD Diesel Engine,", SAE Fuels & Lubricants Meeting & Exhibition Technical Papers, 2004, doi: 10.4271/2004-01-1842.
45. FDBR, Fachverband Dampfkessel, Berhalter Rohrleirungen.
46. Stone R., Introduction to internal combustion engines, 3rd ed., Ed. London: Macmillan, 1999.
47. Minami T., Takeuchi K., and Shimazaki N., "Reduction of Diesel Engine NOx Using Pilot Injection,", in SAE Technical Paper, 1995, doi: 10.4271/950611.
48. Tanaka T., Ando A., and Ishizaka K., "Study on Pilot Injection of DI Diesel Engine Using Common-Rail Injection System,", JSAE, Vol. 23, no. 3, pp. 297-302, 2002, doi: 10.1016/S0389-4304(02)00195-9.