Multi-zone di diesel spray combustion model for cycle simulation studies of engine performance and emissions

SAE Technical Papers

Volumn , Issue , 2001, Pages

  Jung, Dohoy ^a   Assanis, Dennis N ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DIRECT INJECTION; FORECASTING; FUELS; IGNITION; SOOT;

CONSTANT VOLUME CHAMBER; ENGINE PERFORMANCE; HEAT RELEASE RATE (HRR); MOMENTUM CONSERVATION EQUATIONS; OPERATING CONDITION; RATE OF HEAT RELEASE; TURBOCHARGED DIESEL ENGINE; TURBOCHARGED ENGINE;

DIESEL ENGINES;

EID: 85072464056     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2001-01-1246     Document Type: Conference Paper

References (64)

1. Assanis, D. N., and Heywood, J. B., "Development and Use of a Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies," SAE Paper 860329, 1986.
2. Krieger, R. B., and Borman, G. L., "The Computation of Apparent Heat Release from Internal Combustion Engines," ASME Paper 66-WA/DGP-4, 1966.
3. Foster, D. E., "An Overview of Zero-Dimensional Thermodynamic Models for I.C. Engine Data Analysis," SAE Paper 852070, 1985.
4. Oran, E.S., and Boris, J. P., "Detailed Modeling of Combustion Systems," Prog. Energy Combust. Sci., Vol. 7, pp. 1-72, 1981.
5. Bracco, F. V., "Modeling of Engine Sprays," SAE Paper 850394, 1985.
6. Amsden, A. A., Ramshaw, J. D., O'Rourke, P. J., and Dukowicz, J. K., "KIVA: A Computer Program for Two- and Three-Dimensional Fluid Flow with Chemical Reactions and Fuel Sprays," Los Alamos National Laboratory Report LA-10245-MS, 1985.
7. Amsden, A. A., Butler, T. D., and O'Rourke, P. J., "KIVA-II Computer Program for Transient Multidimensional Chemically Reactive Flows with Sprays," SAE Paper 872072, 1987.
8. Patterson, M. A., Kong, S. C., Hampson, G. J., and Reitz, R. D., "Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions," SAE Paper 940523, 1994.
9. Varnavas, C., and Assanis D. N., "A High Temperature and High Pressure Evaporation Model for the KIVA-3 Code," SAE Paper 960629, 1996.
10. Austen, A. E. W., and Lyn, W. T., "Some Steps Toward Calculating Diesel Engine Behavior," SAE Paper 409A, 1961.
11. Whitehouse, N. D., and Sareen B. K., "Prediction of Heat Release in a Quiescent Chamber Diesel Engine Allowing for Fuel/Air Mixing," SAE Paper 740084, 1974.
12. Shahed, S. M., Chiu, W. S., and Lyn, W. T., "A Mathematical Model of Diesel Combustion," Proceedings of the Institution of Mechanical Engineers, C94/75, pp. 119-128, 1975.
13. Chiu, W. S., Shahed, S. M., and Lyn, W. T., "A Transient Spray Mixing Model for Diesel Combustion," SAE Paper 760128, 1976.
14. Hiroyasu, H., and Kadota, T., "Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines," SAE Paper 760129, 1976.
15. Merguerdichian, M., and Watson, N., "Prediction of Mixture Formation and Heat Release in Diesel Engines," SAE Paper 780225, 1978.
16. Dent, J. C., and Mehta, P.S., "Phenomenological Combustion Model for a Quiescent Chamber Diesel Engine," SAE Paper 811235, 1981.
17. Kamimoto, T., Kobayashi, H., and Matsuoka, S., "A Big Size Rapid Compression Machine for Fundamental Studies of Diesel Combustion," SAE Paper 811004, 1981.
18. Kobayashi, H., Kamimoto, T., and Matsuoka, S., "Photographic and Thermodynamic Study of Diesel Combustion in a Rapid Compression Machine," SAE Paper 810259, 1981.
19. Hiroyasu, H., Kadota, T., and Arai, M., "Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions (Part 1 Combustion Modeling), Bulletin of the JSME, Vol. 26, No. 214, pp. 569-575, 1983 a.
20. Hiroyasu, H., Kadota, T., and Arai, M., "Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions (Part 2 Computational Procedure and Parametric Study), Bulletin of the JSME, Vol. 26, No. 214, pp. 576-583, 1983 b.
21. Kono, S., Nagao, A., and Motoka H., "Prediction of In-Cylinder Flow and Spray Formation Effects on Combustion in Direct Injection Diesel Engines," SAE Paper 850108, 1985.
22. Kyriakides, S. C., Dent, J. C., and Mehta, P. S., "Phenomenological Diesel Combustion Model Including Smoke and NO Emission," SAE Paper 860330, 1986.
23. Lipkea, W. H., and DeJoode, A. D., "A Model of a Direct Injection Diesel Combustion System for Use in Cycle Simulation and Optimization Studies," SAE Paper 870573, 1987.
24. Bazari, Z., "A DI Diesel Combustion and Emission Predictive Capability for Use in Cycle Simulation," SAE Paper 920462, 1992.
25. Li, Q., and Assanis, D. N., "A Quasi-Dimensional Combustion Model for Diesel Engine Simulation," ASME, ICE-Vol. 20, 1993.
26. Yoshizaki, T., Nishida, K., and Hiroyasu, H., "Approach to Low NOx and Smoke Emission Engines by Using Phenomenological Simulation," SAE Paper 930612, 1993.
27. Morel, T., and Wahiduzzaman, S., "Modeling of Diesel Combustion and Emissions," 96 FISITA Proceedings, 26th International Congress, Praha, Czech Republic, June 17-21, 1996.
28. Kouremenos, D. A., Rakopoulos, C. D., and Hountalas, D. T., "Multi-Zone Combustion Modeling for the Prediction of Pollutants Emissions and Performance of DI Diesel Engines," SAE Paper 970635, 1997.
29. Bhaskar, T., and Mehta, P. S., "A Multi-Zone Diesel Combustion Model Using Eddy Dissipation Concept," Proceedings of the Fourth International Symposium on Diagnostics and Modeling of Combustion in IC engines, COMODIA 98, Kyoto, Japan, 1998.
30. Rakopoulos C. D., and Hountalas, D. T., "Development and Validation of a 3-D Multi-Zone Combustion Model for the Prediction of DI Diesel Engines Performance and Pollutants Emissions," SAE Paper 981021, 1998.
31. 2 Content," ASME Paper, 2000-ICE-314, 2000.
32. Tauzia, X., Hetet J.-F., Chesse, P., Inozu, B., and Roy, P., "The Use of Phenomenological, Multizone Combustion Model to Investigate Emissions from Marine Diesel Engines," ASME Paper 2000-ICE-325, 2000.
33. Schihl, P., Bryzik, W., and Atreya, A., "Analysis of Current Spray Penetration Models and Proposal of a Phenomenological Cone Penetration Model," SAE Paper 960773, 1996.
34. Dan, T., Takagishi, S., Senda, J., and Fujimoto, H., "Effect of Ambient Gas Properties for Characteristics of Non-Reacting Diesel Fuel Spray," SAE Paper 970352, 1997.
35. Overbye, V. D., Bennethum, J. E., Uyehara, O. A., and Myers, P. S., "Unsteady Heat Transfer in Engines," SAE Trans. Vol. 69, 1961.
36. Annand, J. D., "Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines," Proc. Inst. Mech. Eng., Vol. 177, No. 36, 1963.
37. Ebersole, G. D., Myers, P. S., and Uyehara, O. A., "Radiant and Convective Components of Diesel Engine Heat Transfer," SAE Paper 701C, 1963.
38. Annand, J. D., and Ma, T. H., "Instantaneous Heat Transfer Rates to the Cylinder Head Surface of a Small Compression Ignition Engine," Proc. Inst. Mech. Eng., Vol. 185, No. 72, 1971.
39. Flynn, P., Mizusawa, M., Uyehara, O. A., and Myers, P. S., "An Experimental Determination of the Instantaneous Potential Radiant Heat Transfer within an Operating Diesel Engine," SAE Paper 720022, 1972.
40. Oguri, T., and Shigewo, I., "Radient Heat Transfer in Diesel Engines," SAE Paper 720023, SAE Trans., Vol. 81, 1972.
41. Sitkei, G., and Ramanaiah, G. V., "A Rational Approach for Calculation of Heat Transfer in Diesel Engines," SAE Paper 720027, 1972.
42. Kunitomo, T., Matsuoka, K., and Oguri, T., "Prediction of Radiative Heat Flux in a Diesel Engine," SAE Paper 750786, SAE Trans., Vol. 84, 1975.
43. Dent. J. C., and Suliaman, S. J., "Convective and Radiative Heat Transfer in a High Swirl Direct Injection Diesel Engine," SAE Paper 770407, 1977.
44. Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill Book Co., 1988.
45. Hiroyasu, H., and Arai, M., "Fuel Spray Penetration and Spray Angle of Diesel Engines," Trans. of JSAE, Vol. 21, pp. 5-11, 1980.
46. Reitz, R. D., and Bracco, F. B., "On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions," SAE Paper 790494, 1979.
47. Hiroyasu, H., Arai, M., and Tabata, M., "Empirical Equations for the Sauter Mean Diameter of a Diesel Spray," SAE Paper 890464, 1989.
48. Borman, G. L., and Johnson, J. H., "Unsteady Vaporization Histories and Trajectories of Fuel Drops injected into Swirling Air," SAE Paper 598C, 1962.
49. Gosman, A. D., and Johns, R. J. R., "Computer Analysis of Fuel-Air Mixing in Direct Injection Engines," SAE Paper 800091, 1980.
50. Ranz, W. E., and Marshall, W. R., "Evaporation from Drops," Chem. Eng. Prog., Vol. 48, No. 4, pp. 173-180, 1952.
51. Watson, N., Pilley, A. D., and Marzouk, M. A., "Combustion Correlation for Diesel Engine Simulation," SAE Paper 800029, 1980.
52. Nishida, K., and Hiroyasu, H., "Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine," SAE Paper 890269, 1989.
53. Lavoie, G. A., Heywood, J. B., and Keck, J. C., "Experimental and Theoretical Investigation of Nitric Oxide Formation in Internal Combustion Engines," Combust. Sci. Technol., Vol. 1, pp. 313-326, 1970.
54. Nagle, J., and Strickland-Constable, R. F., "Oxidation of Carbon between 1000-2000 C," Fifth Carbon Conference, Pergamon, Oxford, Vol. 1, pp. 154-164, 1962.
55. Nishimura, A., and Assanis, D. N., "A Model for Primary Diesel Fuel Atomization Based on Cavitation Bubble Collapse Energy," Eighth International Conference on Liquid Atomization and Spray System (ICLASS), 2000.
56. Dan, T., "The Turbulent Mechanism and Structure of Diesel Spray," Ph. D. Thesis, Toshisya University, 1996.
57. Filipi, Z. S., Homsy, S. C., Morrison, K. M., Hoffman, S. J., Dowling, D. R., and Assanis, D. N., "Strain Gage Based Instrumentation for In-Situ Diesel Fuel Injection System Diagnostics," ASEE Annual Conference, Milwaukee, Wisconsin, June 15-18, 1997.
58. Assanis, D. N., Filipi, Z. S., Fiveland, S. B., and Syrimis, M., "A Predictive Ignition Delay Correlation under Steady-State and Transient Operation of a Direct Injection Diesel Engine," ASME paper, 99-ICE-231, 1999.
59. Fiveland, S. B., "Development of Engine Measurement Techniques with Application to Steady State and Transient Ignition Delay and Heat Release Analysis in a Direct-Injection Diesel Engine," Master's Thesis, The University of Michigan, 1999.
60. Millington, B. W., Hartles, E. R., "Frictional Losses in Diesel Engines," SAE Paper 680590, SAE Transactions, Vol. 77, 1968.
61. Nehmer, D. A., and Reitz, R. D., "Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions," SAE Paper 940668, 1994.
62. Levich, V. G., Physicochemical Hydrodynamics, Prentice-Hall Inc., Englewood cliffs, New Jersey, pp. 639-650, 1962.
63. Wakuri, Y., Fujii, M., Amitani, T., and Tsuneya, R., "Studies of the Penetration of a Fuel Spray in a Diesel Engine," Bulletin of the JSME, Vol. 3, No. 9, pp. 123-130, 1960.
64. Dent, J. C., "Basis for the Comparison of Various Experimental Methods for Studying Spray Penetration," SAE Paper 710571, 1971.