Thermal Plasma Spray Deposition of Titanium and Hydroxyapatite on Polyaryletheretherketone Implants

PEEK Biomaterials Handbook

Volumn , Issue , 2012, Pages 119-143

  Robotti, Pierfrancesco ^a   Zappini, Gianluca ^a  

^a Eurocoating SPA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84882488440     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-1-4377-4463-7.10009-0     Document Type: Chapter

References (94)

1. B. Christianson, Pioneering CFR-PEEK for spinal cages, in: Proceedings, MD&M conference, Minneapolis, Minnesota, USA, October 12-14, 2010.
2. Capps S. PEEK cages and spacers in cervical spine fusion applications: review of published literature. Spinal News Int. Sept. 2007, 4.
3. Bao Q.B., Songer M., Pimenta K., Werner D., Reyes-Sanchez A., Balsano M., et al. NUBAC intradiscal arthroplasty: preclinical studies and preliminary safety and efficacy evaluations. SAS J. 2007, 1(1):36-45.
4. Devine J.N. Developing PEEK polymer as a bearing material for implants. MDDI Online May 1, 2006.
5. H. Austin, M. Harper, J. Medley, PEEK-on-PEEK for application in cervical disc arthroplasty? in: Proceedings, 8th World Biomaterials Congress, Amsterdam, The Netherlands, May 28-June 1, 2008.
6. M. Hawkins, Design and development of the epoch stem, in: Proceedings, MD&M conference, Minneapolis, Minnesota, USA, October 12-14, 2010.
7. Pace N., Marinelli M., Spurio S. Technical and histologic analysis of a retrieved carbon fiber-PEEK composite alumina bearing liner 28 months after implantation. J. Arthroplasty 2008, 23:151.
8. J. Nevelos, Design of PEEK orthopaedic bearings, in: Proceedings, MD&M conference, Minneapolis, Minnesota, USA, October 12-14, 2010.
9. J.N. Devine, S.C.Scholes, A. Unsworth, Tribology of a pitch carbon fiber PEEK against CoCrMo unicondylar knee bearing, in: Proceedings, Society for Biomaterials Annual Meeting, San Antonio, Texas, USA, April 22-25, 2009.
10. Grupp T.M., Utzschneider S., Schroder C., Schwiesan J., Fritz B., Maas A., et al. Biotribology of alternative bearing materials for unicompartimental knee arthroplasty. Acta Biomater. 2010, 6(9):3601-3610.
11. Soballe K., Hansen E.S., Brockstedt-Rasmussen H., Bunger C. Hydroxyapatite coating converts fibrous tissue to bone around loaded implants. J. Bone Joint Surg. Br. 1993, 75(2):270-278.
12. Galante J., Rostoker W., Lueck R., Ray R.D. Sintered fiber metal composites as a basis for attachment of implants to bone. J. Bone Joint Surg. Am. 1971, 53(1):101-114.
13. Galante J., Rostoker W. Fiber metal composites in the fixation of skeletal prosthesis. J. Biomed. Mater. Res. 1973, 4:43-61.
14. Pillar R.M. Porous-surfaced metallic implants for orthopedic applications. J. Biomed. Mater. Res. 1987, 21(Suppl. A1):1-33.
15. W. Winkler-Gniewek, H. Stallforth, M. Ungethüm, H. Gruner, Strucutre and properties of VPS coatings in medical technology, in: 1st Plasma-technik Symposium, vol. 3, 1988, p. 95-102.
16. Woolson S.T., Delaney T.J. Failure of a proximally porous-coated femoral prosthesis in revision total hip arthroplasty. J. Arthroplasty 1995, 10:S22-S28.
17. Paprosky W.G., Burnett R.S. Extensively porous-coated femoral stems in revision hip arthroplasty: rationale and results. Am. J. Orthop. (Belle Mead, NJ) 2002, 31(8):471-474.
18. Brossa F., Cigada A., Chiesa R., Paracchini L., Consonni C. Adhesion properties of plasma sprayed hydroxyapatite coatings for orthopaedic prostheses. Biomed. Mater. Eng. 1993, 3:127-136.
19. Lombardi A.V., Berend K.R., Mallory T.H., Skeels M.D., Adams J.B. Survivorship of 2000 tapered titanium porous plasma-sprayed femoral components. Clin. Orthop. Relat. Res. 2009, 467(1):146-154.
20. Eskelinen A., Remes V., Helenius I., Pulkkinen P., Nevalainen J., Paavolainen P. Uncemented total hip arthroplasty for primary osteoarthritis in young patients: a mid- to long-term follow-up study from the finnish arthroplasty register. Acta Orthop. 2006, 77(1):57-70.
21. Lugscheider E., Weber T. Plasma spraying-an innovative coating technique: process variants and applications. IEEE Trans. Plasma Sci. 1990, 18(6):968-973.
22. Steffens H.D., Mack M. Plasma spraying as an advanced tool in surface engineering. Pure Appl. Chem. 1990, 62(9):1801-1808.
23. Crawmer D.E. Introduction to coatings, equipment, and theory. Handbook of Thermal Spray Technology 2004, 43-46. ASM International, Materials Park, OH. J.R. Davis (Ed.).
24. Fauchais P. Understanding plasma spraying. J. Phys. Appl. Phys. 2004, 37:86-108.
25. Yoshida T. Toward a new era of plasma spray processing. Pure Appl. Chem. 2006, 78(6):1093-1107.
26. Long M., Rack H.J. Titanium alloys in total joint replacement-a materials science perspective. Biomaterials 1998, 19(18):1621-1639.
27. Frosch K.H., Stürmer K.M. Metallic biomaterials in skeletal repair. Eur. J. Trauma 2006, 32(2):149-159.
28. Tsui Y.C., Doyle C., Clyne T.W. Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 1: Mechanical properties and residual stress levels. Biomaterials 1998, 19(22):2015-2029.
29. Tsui Y.C., Doyle C., Clyne T.W. Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 2: Optimisation of coating properties. Biomaterials 1998, 19(22):2031-2043.
30. Paital S.R., Dahotre N.B. Calcium phosphate coatings for bio-implant applications: materials, performance factors, and methodologies. Mater. Sci. Eng. R Rep. 2009, 66:1-70.
31. Hahn H., Palich W. Preliminary evaluation of porous metal surfaced titanium for orthopedic implants. J. Biomed. Mater. Res. 1970, 4:571-577.
32. Sumitomo Chemical Co. Osaka Japan. Patent Application No. 158745, 1975.
33. Osborn J.F. Implantatwerkstoff Hydroxylapatitkeramik-Grundlagen und klinische Anwendungen 1985, Quintessenz Verlag, Berlin.
34. Osborn J.F. Die biologische Leistung der Hydroxylkeramik-Beschichtung auf dem Femurschaft einer Titanendoprothese-erste histologische Auswertung eines Humanex plantates. Biomed. Tech. 1987, 32:177-183.
35. Geesink R.G.T., Groot K.D., Klein C.P.A.T. Bonding of bone to apatite-coated implants. J. Bone Joint Surg. Br. 1988, 70:17-22.
36. Oinishi H., Yamamoto M., Ishimaru H., Tsuji E., Kushitani S., Aono M., et al. The effect of hydroxyapatite coating on bone growth into porous titanium alloy implants. J. Bone Joint Surg. Br. 1989, 71:213-216.
37. Furlong R., Osborn J.F. Fixation of hip prostheses by hydroxyapatite ceramic coatings. J. Bone Joint Surg. Br. 1991, 73:741-745.
38. Sun L., Berndt C.C., Gross K.A., Kucuk A. Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review. J. Biomed. Mater. Res. 2001, 58(5):570-592.
39. Dumbleton J., Manley M.T. Hydroxyapatite-coated prostheses in total hip and knee arthroplasty. J. Bone Joint Surg. Am. 2004, 86(11):2526-2540.
40. Lugscheider E., Knepper M., Heimberg B. Cytotoxicity investigation of plasma-sprayed calcium phosphate coatings. J. Mater. Sci. Mater. Med. 1994, 5:371-375.
41. Frayssinet P., Tourenne F., Rouquet N., Conte P., Delga C., Bonel G. Comparative biological properties of HA plasma-sprayed coatings having different crystallinities. J. Mater. Sci. Mater. Med. 1994, 5:11-17.
42. Klein C.P.A.T., Wolke J.G.C., Blieck-Hogervorst J.M.A.D., Groot K.D. Calcium phosphate plasma-sprayed coatings and their stability: an in-vivo study. J. Biomed. Mater. Res. 1994, 28:909-917.
43. LeGeros Z. Biodegradation and bioresorption of calcium phosphate ceramics. Clin. Mater. 1993, 14(1):65-88.
44. Brossa F., Cigada A., Chiesa R., Paracchini L., Consonni C. Post-deposition treatment effects on hydroxyapatite vacuum plasma spray coatings. J. Mater. Sci. Mater. Med. 1994, 5:855-857.
45. Weng J., Liu X., Zhang X., Groot K. Integrity and thermal decomposition of apatite in coatings influenced by underlying titanium during plasma spraying and post-heat treatment. J. Biomed. Mater. Res. 1996, 30:5-11.
46. Sulzer Calcitek Inc. Prosthetic implants coated with hydroxylapatite and process for treating prosthetic implants plasma-sprayed with hydroxylapatite. European Patent No. EP0864332; 1998.
47. Burgess A.V., Story B.J., La D., Wagner W.R., LeGeros J.P. Highly crystalline MP-1TM hydroxylapatite coating part I: In vitro characterization and comparison to other plasma-sprayed hydroxylapatite coatings. Clin. Oral Implants Res. 1999, 10:245-256.
48. Chang C., Shi J., Huang J., Hu Z., Ding C. Effects of power level on characteristics of vacuum plasma sprayed hydroxyapatite coating. J. Therm. Spray. Technol. 1998, 7(4):484-488.
49. Chang C., Huang J., Xia J., Ding C. Study on crystallization kinetics of plasma sprayed hydroxyapatite coating. Ceram. Int. 1999, 25(5):479-483.
50. Moroni A., Faldini C., Rocca M., Stea S., Giannini S. Improvement of the bone-screw interface strength with hydroxyapatite-coated and titanium-coated AO/ASIF cortical screws. J. Orthop. Trauma 2002, 16(4):257-263.
51. Moroni A., Vannini F., Mosca M., Giannini S. State of the art review: techniques to avoid pin loosening and infection in external fixation. J. Orthop. Trauma 2002, 16(3):189-195.
52. Saithna A. The influence of hydroxyapatite coating of external fixator pins on pin loosening and pin track infection: a systematic review. Injury 2010, 41(2):128-132.
53. CDRH Guidance for industry on the testing of metallic plasma sprayed coatings on orthopedic implants to support reconsideration of postmarket surveillance requirements February 2, 2000, FDA/CDRH, Rockville, MD.
54. ASTM Standard F1854 - 09 Standard test method for stereological evaluation of porous coatings on medical implants 2009, ASTM International, West Conshohocken, PA.
55. ASTM Standard F1147 - 05 Standard test method for tension testing of calcium phosphate and metal coatings 2005, ASTM International, West Conshohocken, PA.
56. ASTM Standard F1044 - 05 Standard test method for shear testing of calcium phosphate coatings and metallic coatings 2005, ASTM International, West Conshohocken, PA.
57. ASTM Standard F1160 - 05 Standard test method for shear and bending fatigue testing of calcium phosphate and metallic medical and composite calcium phosphate/metallic coatings 2005, ASTM International, West Conshohocken, PA.
58. ASTM Standard F1978 - 00(2007)e2 Standard test method for measuring abrasion resistance of metallic thermal spray coatings by using the taber abraser 2007, ASTM International, West Conshohocken, PA.
59. ASTM Standard F1580 - 07 Standard specification for titanium and titanium-6 aluminum-4 vanadium alloy powders for coatings of surgical implants 2007, ASTM International, West Conshohocken, PA.
60. ASTM Standard E1409 - 08 Standard test method for determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique 2008, ASTM International, West Conshohocken, PA.
61. ASTM Standard E1447 - 09 Standard test method for determination of hydrogen in titanium and titanium alloys by the inert gas fusion thermal conductivity/infrared detection method 2009, ASTM International, West Conshohocken, PA.
62. ASTM Standard E1941 - 10 Standard test method for determination of carbon in refractory and reactive metals and their alloys by combustion analysis 2010, ASTM International, West Conshohocken, PA.
63. ISO Standard 13779-2:2008 Implants for surgery-hydroxyapatite-part 2: Coatings of hydroxyapatite 2008, International Organization for Standardization, Geneva, Switzerland.
64. ASTM Standard F1609 - 08 Standard specification for calcium phosphate coatings for implantable materials 2007, ASTM International, West Conshohocken, PA.
65. ISO Standard 13779-3:2008 Implants for surgery-hydroxyapatite-part 3: Chemical analysis and characterization of crystallinity and phase purity 2008, International Organization for Standardization, Geneva, Switzerland.
66. ISO Standard 13779-4:2008 Implants for surgery-hydroxyapatite-part 4: Determination of coating adhesion strength 2008, International Organization for Standardization, Geneva, Switzerland.
67. ASTM Standard F1185-03:2009 Standard specification for composition of hydroxylapatite for surgical implants 2009, ASTM International, West Conshohocken, PA.
68. ISO Standard 4287:1997 Geometrical product specifications (GPS)-surface texture: profile method-terms, definitions and surface texture parameters 1997, International Organization for Standardization, Geneva, Switzerland.
69. ISO Standard 4288:1996 Geometrical product specifications (GPS)-surface texture: profile method-rules and procedures for the assessment of surface texture 1996, International Organization for Standardization, Geneva, Switzerland.
70. ASTM Standard F748 - 06:2010 Standard practice for selecting generic biological test methods for materials and devices 2010, ASTM International, West Conshohocken, PA.
71. ASTM Standard F981 - 04:2010 Standard practice for assessment of compatibility of biomaterials for surgical implants with respect to effect of materials on muscle and bone 2010, ASTM International, West Conshohocken, PA.
72. ISO Standard 10993-1:2009 Biological evaluation of medical devices-part 1: Evaluation and testing within a risk management process 2009, International Organization for Standardization, Geneva, Switzerland.
73. ISO Standard 527-1:1993 Plastics-determination of tensile properties-part 1: General principles 1993, International Organization for Standardization, Geneva, Switzerland.
74. ASTM Standard D638 - 10 Standard test method for tensile properties of plastics 2010, ASTM International, West Conshohocken, PA.
75. ISO Standard 178:2010 Plastics-determination of flexural properties 2010, International Organization for Standardization, Geneva, Switzerland.
76. ASTM Standard D790 - 10 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials 2010, ASTM International, West Conshohocken, PA.
77. Griffiths P., de Haseth J.A. Fourier Transform Infrared Spectrometry 2007, John Wiley & Sons, Hoboken, NJ. second ed.
78. Nakamura H., Nakamura T., Noguchi T., Imagawa K. Photodegradation of PEEK sheets under tensile stress. Polym. Degrad. Stab. 2006, 91(4):740-746.
79. Sutter J.K., Naik S.K., Horan R., Myoshi K., Bowman C. Erosion resistant coatings for polymer matrix composites in propulsion applications. NASA Report, NASA/TM-2003-212201 2003.
80. Ivosevic M., Knight R., Kalidindi S.R., Palmese G.R., Sutter J.K. Erosion/oxidation resistant coatings for high temperature polymer composites. High Perform. Polym. 2003, 15:503-517.
81. Ivosevic M., Knight R., Kalidindi S., Palmese G., Sutter J. Adhesive/cohesive properties of thermally sprayed functionally graded coatings for polymer matrix composites. J. Therm. Spray. Technol. 2005, 14(1):45-51.
82. Giancaterina S., Rossi A., Rivaton A., Gardette J.L. Photochemical evolution of poly(ether ether ketone). Polym. Degrad. Stab. 2000, 68(1):133-144.
83. Ha S.W., Mayer J., Koch B., Wintermantel E. Plasma-sprayed hydroxylapatite coating on carbon fibre reinforced thermoplastic composite materials. J. Mater. Sci. Mater. Med. 1994, 5:481-484.
84. Ha S.W., Gisep A., Mayer J., Wintermantel E. Topographical characterization and microstructural interface analysis of vacuum-plasma-sprayed titanium and hydroxyapatite coatings on carbon fibre-reinforced poly(etheretherketone). J. Mater. Sci. Mater. Med. 1997, 8:891-896.
85. Auclair-Daigle C., Bureau M.N., Legoux J.G., Yahia L.H. Bioactive hydroxyapatite coatings on polymer composites for orthopedic implants. J. Biomed. Mater. Res. A 2005, 73(4):398-408.
86. S. Beauvais, O. Decaux, Plasma sprayed biocompatible coatings on PEEK implants, in: Proceedings, International Thermal Spray Conference, Beijing, China, May 14-17, 2007.
87. M.N. Bureau, J.G. Legoux, S. Dimitrievska, CaP coating on PEEK varies upon processing conditions, in: Proceedings, Orthopaedic Research Society Annual Meeting, Las Vegas, NV, USA, February 22-25, 2009.
88. M.N. Bureau, A. Spring, J.G. Legoux, High adhesion plasma-sprayed HA coating on PEEK and other polymers, in: Proceedings, Society for Biomaterials Annual Meeting, San Antonio, Texas, USA, April 22-25, 2009.
89. Gisep A., Wieling R. Osteointegrative surfaces for CF/PEEK implants. Eur. Cell Mater. 2009, 17(Suppl. 1):10.
90. D.M. Devine, L.P. Bouré, J. Hahn, A. Pearce, E. Schneider, R. Wieling, et al. Coating of carbon fibre reinforced PEEK implants with titanium by vapour plasma spraying for improved bone apposition, in: Proceedings, Orthopaedic Research Society Annual Meeting, 2008.
91. S. Vedova, P. Robotti, A. Fabbri, D. Zeni, M. D'Amato, B. Monelli, Effects of plasma spray HA coating process onto mechanical properties of PEEK and carbon fiber reinforced PEEK, in: Proceedings, 8th World Biomaterials Congress, Amsterdam, The Netherlands, May 28-June 1, 2008.
92. P. Robotti, S. Vedova, A. Fabbri, C. Migliaresi, V. Fontanari, Plasma spray deposition of titanium and hydroxyapatite on PEEK and CFR-PEEK, in: Proceedings of the Society for Biomaterials Annual Meeting, San Antonio, Texas, USA, April 22-25, 2009.
93. P. Robotti, S. Vedova, A. Fabbri, G. Zappini, C. Migliaresi, Static and fatigue tensile properties of titanium-coated carbon fiber-reinforced PEEK, in: Proceedings of the 22nd European Conference on Biomaterials, Lausanne, September 8-12, 2009.
94. P. Robotti, G. Zappini, Metal and HA coating technologies for PEEK implants, in: Proceedings, MD&M conference, Minneapolis, Minnesota, USA, October 12-14, 2010.