Highly Crosslinked and Annealed UHMWPE

UHMWPE Biomaterials Handbook

Volumn , Issue , 2009, Pages 205-219

  Dumbleton, John H ^a   Wang, Aiguo ^b   Sutton, Kate ^b   Manley, Michael T ^b  

^a Consultancy in Medical Devices ^*  (United States)

^b STRYKER ORTHOPAEDICS   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84882475278     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-12-374721-1.00014-6     Document Type: Chapter

References (44)

1. Oonishi H, Kadoya Y Wear of high-dose gamma-irradiated polyethylene in total hip replacements. J Orthop Sci 2000, 5(3):223-228.
2. Grobbelaar CJ, du Plessis TA, Marais F The radiation improvement of polyethylene prostheses. A preliminary study. J Bone Joint Surg Br 1978, 60-B(3):370-374.
3. Wroblewski BM, Siney PD, Fleming PA Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene. A 17-year follow-up report. J Bone Joint Surg Br 2005, 87(9):1220-1221.
4. Mejia LC, Brierley TJ A hip wear simulator for the evaluation of biomaterials in hip arthroplasty components. Biomed Mater Eng 1994, 4:259-271.
5. Wang A, Stark C, Dumbleton JH Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses. Proc Instn Mech Eng [H] 1996, 210:157-166.
6. Bragdon CR, O'Connor DO, Lowenstein JD, Jasty M, Syniuta WD The importance of multidirectional motion on the wear of polyethylene. Proc Inst Mech Eng [H] 1996, 210:157-166.
7. Kurtz SM, Pruitt LA, Jewett CW, Foulds JR, Edidin AA Radiation and chemical crosslinking promote strain hardening behavior and molecular alignment in ultra high molecular weight polyethylene during multi-axial loading condtions. Biomaterials 1999, 20:449-1462.
8. Wang A, Polineni VK, Essner A, Sun DC, Stark C, Dumbleton JH. Effect of radiation dosage on the wear of stabilized UHMWPE evaluated by hip and knee simulators. Paper 394. New Orleans, LA; 1997.
9. Jahan MS, Wang C, Schwartz G, Davidson JA Combined chemical and mechanical effects on free radicals in UHMWPE joints during implantation. J Biomed Mater Res 1991, 25:1005-1017.
10. Premnath V, Harris WH, Jasty M, Merrill EW Gamma sterilization of UHMWPE articular implants: an analysis of the oxidation problem. Ultra High Molecular Weight Polyethylene. Biomaterials 1996, 18:1741-1753.
11. Essner A, Polineni VK, Schmidig G, Wang A, Stark C, Dumbleton JH. Long-term wear simulation of stabilized UHMWPE acetabular cups. Poster 784. San Francisco, CA; 1997.
12. Sun DC, Stark C. U.S. Patent #5,414,049-Non-oxidizing polymeric medical implant; 1995.
13. Sun DC, Stark C, Dumbleton JH Development of an accelerated aging method for evaluation of long-term irradiation effects on UHMWPE implants. Polym Repr 1994, 35:969-970.
14. Sun DC, Stark C, Dumbleton JH. Development of stabilized UHMWPE implants with improved oxidation resistance via crosslinking. Scientific Exhibit S82. Atlanta, GA; 1996.
15. Sun DC, Schmidig G, Yau S-S, Huffman M, Stark C, Dumbleton JH. Assessment of gel content and crosslinking density in UHMWPE. Paper 431. New Orleans, LA; 1997.
16. Polineni VK, Wang A, Essner A, Sun DC, Stark C, Dumbleton JH Effect of gamma-radiation induced oxidation and crosslinking on the wear performance of Ultra-High Molecular Weight Polyethylene (UHMWPE) Acetabular Cups. Characterization and Properties of Ultra-High Molecular Weight Polyethylene 1998, ASTM STP 1307:95-108. American Society for Testing and Materials. R.A. Gsell, H.L. Stein, J.J. Ploskonka (Eds.).
17. Martell JM, Berkson E, Berger R, Jacobs J Comparison of two and three-dimensional computerized polyethylene wear analysis after total hip arthroplasty. J Bone Joint Surg Am 2003, 85A(6):1111-1117.
18. Geerdink CH, Grimm B, Ramakrishnan R, Rondhuis J, Verburg AJ, Tonino AJ Crosslinked polyethylene compared to conventional polyethylene in total hip replacement: pre-clinical evaluation, in-vitro testing and prospective clinical follow-up study. Acta Orthop 2006, 77(5):719-725.
19. Grimm B, Tonino AJ, Heyligers IC. 8-year prospective randomized comparison between a crosslinked and conventional polyethylene in total hip arthroplasty. p Free Papers-Hip #10. Florence, Italy; 2007.
20. Hirakawa K, Inaba Y, Murakami K. Randomized prospective comparison between Duration and conventional UHMWPE for primary THA. Poster P066. Washington, D.C.; 2005.
21. Kurtz SM, Manley MT, Wang A, Taylor S, Dumbleton JH Comparison of the properties of annealed crosslinked (Crossfire) and conventional polyethylene as hip bearing materials. Bulle-Hosp Joint Dis 2003, 61(1 & 2):17-26.
22. Collier JP, Currier BH, Kennedy FE, Currier JH, Timmins GS, Jackson SK, Brewer RL Comparison of cross-linked polyethylene materials for orthopaedic applications. Clin Orthop Relat Res 2003, 414:289-304.
23. Muratoglu OK, Merrill EW, Bragdon CR, O'Connor D, Hoeffel D, Burroughs B, Jasty M, Harris WH Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene. Clin Orthop Relat Res Relat Res 2003, 417:253-262.
24. Wannomae KK, Christensen SD, Freiberg AA, Bhattacharyya S, Harris WH, Muratoglu OK The effect of real-time aging on the oxidation and wear of highly cross-lined UHMWPE acetabular liners. Biomaterials 2006, 27(9):1980-1987.
25. Wang A, Manley MT, Serekian P Wear and structural fatigue simulation of crosslinked ultra-high molecular weight polyethylene for hip and knee bearing applications 2003, ASTM International STP 1445.
26. Taylor S, Serekian P, Bruchalski P, Manley MT. The performance of irradiation-crosslinked UHMWPE cups under abrasive conditions throughout hip simulation testing. Paper 252. Anaheim, CA; 1999.
27. Martell JM, Verner JJ, Incavo SJ Clinical performance of a highly cross-linked polyethylene at two years in total hip arthroplasty: a randomized prospective trial. J Arthroplasty 2003, 18(7 Suppl 1):55-59.
28. Martell JM, Berdia S Determination of polyethylene wear in total hip replacements with use of digital radiographs. J Bone Joint Surg Am 1997, 79(11):1635-1641.
29. D'Antonio JA, Manley MT, Capello WN, Bierbaum B, Ramakrishnan R, Naughton M, Sutton K Five-year experience with crossfire highly crosslinked polyethylene. Clin Orthop Rel Res 2005, 441:143-150.
30. Rajadhyaksha AD, Brotea C, Cheung Y, Kuhn C, Ramakrishnan R, Zelicof SB Five-year comparative study of highly cross-linked (Crossfire) and traditional polyethylene. J Arthroplasty 2009, (In Press).
31. Wannomae KK, Bhattacharyya S, Freiberg A, Estok D, Harris WH, Muratoglu O In vivo oxidation of retrieved cross-linked ultra-high-molecular-weight polyethylene acetabular components with residual free radicals. J Arthroplasty 2006, 21(7):1005-1011.
32. Currier BH, Currier JH, Mayor MB, Lyford KA, Collier JP, Van Critters DW Evaluation of oxidation and fatigue damage of retrieved Crossfire polyethylene acetabular cups. J Bone Joint Surg Am 2007, 89(9):2023-2029.
33. Kurtz SM, Hozack WJ, Turner J, Purtill J, MacDonald D, Sharkey P, Parvizi J, Manley MT, Rothman RH Mechanical properties of retrieved highly crosslinked (Crossfire) liners after short-term implantation. J Arthroplasty 2005, 20(7):840-849.
34. Kurtz SM, Hozack WJ, Purtill JJ, Marcolongo M, Kraay MJ, Goldberg VM, Sharkey PF, Parvizi J, Rimnac CM, Edidin AA 2006 Otto Aufranc Award Paper: significance of in vivo degradation for polyethylene in total hip arthroplasty. Clin Orthop Relat Res 2006, 453:47-57.
35. Kurtz SM, Austin M, Azzam K, Sharkey P, MacDonald D, Medel FJ, Hozack WJ Mechanical properties, oxidation and clinical performance of retrieved highly cross-linked crossfire liners after intermediate-term implantation. J Arthroplasty 2008, (In Press).
36. Kester MA, Herrera L, Wang A, Essner A Knee bearing technology. Where is technology taking us?. J Arthroplasty 2007, 22(Suppl 3):16-20.
37. Wang A, Yau SS, Essner A, Herrera L, Manley M, Dumbleton JH A highly crosslinked UHMWPE for CR and PS total knee arthroplasties. J Arthroplasty 2008, 23(4):559-566.
38. Wang A, Zeng H, Yau SS, Essner A, Manley M, Dumbleton JH Wear, oxidation, and mechanical properties of a sequentially irradiated and annealed UHMWPE in total joint replacement. J Phys D Appl Phys 2006, 39:3213-3219.
39. Dumbleton JH, D'Antonio JA, Manley MT, Capello WN, Wang A The basis for a second generation highly crosslinked UHMWPE. Clin Orthop Relat Res 2006, 453:265-271.
40. Herrera L, Lee R, Longaray J, Essner A, Wang A Hip simulator evaluation of the effect of femoral head size on sequentially crosslinked acetabular liners. Wear 2007, 263:1034-1037.
41. Tsukamoto R, Williams PA, Shoji H, Hirakawa K, Yamamoto K, Tsukamoto M, Clarke IC Wear of sequentially enhanced 9-Mrad polyethylene in 10 million cycle knee simulation study. J Biomed Mater Res B Appl Biomater 2008, 86(1):119-124.
42. Williams P, Tsukamoto R, Clarke I. Wear debris from sequentially crosslinked and crosslinked PE in a knee simulator model. Paper #218. San Francisco, CA; 2008.
43. Hermida JC, Fischler A, Bhimji S, Colwell CWJ, D'Lima DD. Effect of component malalignment and aging on sequentially crosslinked polyethylene knee arthroplasty inserts. Poster #1874. San Diego, CA: 2007.
44. Kurtz SM, MacDonald D, Brenner E, Medel FJ, Hozack WJ, Purtill JJ, Parvisi J, Austin M, Goldberg VM, Kraay MJ, et al. In vivo oxidation, oxidation potential, and clinical performance of first and second-generation highly crosslinked acetbular bearings for THA. Poster 1790. San Francisco, CA; 2008.