A Highly Crosslinked UHMWPE for CR and PS Total Knee Arthroplasties

Journal of Arthroplasty

Volumn 23, Issue 4, 2008, Pages 559-566

  Wang, Aiguo ^a   Yau, Shi Shen ^a   Essner, Aaron ^a   Herrera, Lizeth ^a   Manley, Michael ^a   Dumbleton, John ^b  

^a STRYKER ORTHOPAEDICS   (United States)

^b Homer Stryker MD Center ^*  (United States)

Author keywords

CR; highly crosslinked; knee; polyethylene; PS; wear reduction

Indexed keywords

ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE;

ARTICLE; CROSS LINKING; DEVICE; ENDOPROSTHESIS; JOINT STABILITY; KNEE CRUCIATE LIGAMENT; MATERIALS TESTING; MECHANICAL STRESS; OXIDATION KINETICS; SIMULATOR; TENSILE STRENGTH; TOTAL KNEE REPLACEMENT;

ANTERIOR CRUCIATE LIGAMENT; ARTHROPLASTY, REPLACEMENT, KNEE; BIOMECHANICS; COMPUTER SIMULATION; ELECTRON SPIN RESONANCE SPECTROSCOPY; EQUIPMENT FAILURE ANALYSIS; FREE RADICALS; HUMANS; KNEE PROSTHESIS; MICROSCOPY, ELECTRON, SCANNING; OXIDATION-REDUCTION; POLYETHYLENES; PROSTHESIS DESIGN; STERILIZATION; STRESS, MECHANICAL; SURFACE PROPERTIES; TENSILE STRENGTH;

EID: 44449129970     PISSN: 08835403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arth.2007.05.007     Document Type: Article

References (47)

1. Kurtz S.M. The UHMWPE Handbook (2004), Elsevier, Amsterdam 337
2. Bragdon C.R., O'Connor D.O., Muratoglu O.K., et al. A new polyethylene with undetectable wear at 12millioncycles. Trans 24th Soc Biomater 21 (1998) 2
3. McKellop H., Shen F.W., Lu B., et al. Development of an extremely wear-resistant ultrahigh molecular weight polyethylene for total hip replacements. J Orthop Res 17 (1999) 157
4. Muratoglu O.K., Bragdon C.R., O'Connor D.O., et al. A novel method of cross-linking ultrahigh molecular weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. J Arthroplasty 16 (2001) 149
5. Taylor S., Serekian P., Bruchalski P., et al. The performance of irradiation-crosslinked UHMWPE cups under abrasive conditions throughout hip simulation testing. Trans 45th Orthop Res Soc (1999) 252
6. Dorr L.D., Wan Z., Shahrdar C., et al. Clinical performance of a Durasul highly cross-linked polyethylene acetabular liner for total hip arthroplasty. J Bone Joint Surg Am 87 (2005) 1816
7. D'Antonio J.A., Capello W.N., Manley M.T., et al. Five-year experience with Crossfire highly cross-linked polyethylene. Clin Orthop 441 (2005) 143
8. Heisel C., Silva M., dela Rosa M.A., et al. Short-term in vivo wear of cross-linked polyethylene. J Bone Joint Surg Am 86 (2004) 748
9. Manning D.W., Chiang P.P., Martell J.M., et al. In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty. J Arthroplasty 20 (2005) 880
10. Collier J.P., Currier B.H., Kennedy F.E., et al. Comparison of cross-linked polyethylene materials for orthopaedic applications. Clin Orthop 414 (2003) 289
11. Wang A., Manley M.T., and Serekian P. Wear and structural fatigue simulation of crosslinked ultra-high molecular weight polyethylene for hip and knee bearing applications. In: Kurtz S.M., Gsell R., and Martell J. (Eds). Crosslinked and thermally treated ultra-high molecular weight polyethylene for joint replacements, ASTM STP 1445 (2003), ASTM International, West Conshohocken (Pa) 151
12. Kurtz S.M., Villarraga M.L., Herr M.P., et al. Thermomechanical behavior of virgin and highly crosslinked ultra-high molecular weight polyethylene used in total joint replacements. Biomaterials 23 (2002) 3681
13. Oral E., Wannomae K.K., Hawkins N., et al. α-Tocopherol-doped irradiated UHMWPE for high fatigue resistance and low wear. Biomaterials 25 (2004) 5515
14. Oral E., Malhi A.S., and Muratoglu O.K. Mechanisms of decrease in fatigue crack propagation resistance in irradiated and melted UHMWPE. Biomaterials 24 (2006) 917
15. Kurtz A.M., Manley M., Wang A., et al. Comparison of the properties of annealed crosslinked (Crossfire) and conventional polyethylene as bearing materials. Bull Hosp Joint Dis 61 (2002-2003) 17
16. Bhattacharyya S., Doherty A.M., Wannomae K.K., et al. Severe in vivo oxidation in a limited series of retrieved highly crosslinked UHMWPE acetabular components with residual free radicals. Trans 50th Orthop Res Soc (2004) 276
17. Wannomae K.K., Christensen S.D., Freiberg A.A., et al. The effect of real-time aging on the oxidation and wear of highly cross-linked UHMWPE acetabular liners. Biomaterials 27 (2006) 1980
18. Kurtz S.M., Hozack W., Turner J., et al. Mechanical properties of retrieved highly cross-linked Crossfire liners after short-term implantation. J Arthroplasty 20 (2005) 840
19. Bhattacharyya S., Spiegelberg S.H., Harris W.H., et al. Mechanical elimination of free radicals in UHMWPE after radiation. Trans 50th Orthop Res Soc (2004) 184
20. Kurtz S.M., Mazzucco D., Rimnac C.M., et al. Anisotropy and oxidative resistance of highly crosslinked UHMWPE after deformation processing by solid-state ram extrusion. Biomaterials 27 (2006) 24
21. Muratoglu O.K., Burroughs B.R., Malhi A., et al. Two second-generation highly crosslinked UHMWPEs show improved mechanical properties and fatigue strength. Trans 51st Orthop Res Soc (2005) 1661
22. International Organization for Standardization, London, England, ISO/DIS 14243-3, Implants for surgery-Wear of total knee joint prostheses [Part 3: Loading and displacement parameters for wear testing machines with displacement control and corresponding environmental conditions for test.
23. Saari H., Santavirta S., Nordstrom D., et al. Hyaluronan in total hip replacement. J Rheumatol 20 (1993) 87
24. Scott M., Forster H., Jani S., et al. Validation of an alternative method for isolating UHMWPE wear debris from joint simulator serum. Trans. 6th World Biomaterials Congress, Kamuela, Hawaii (2000) 177
25. Essner A., Zeng H., Yau S.-S., et al. Stair climbing knee wear simulation: sequentially crosslinked and annealed UHMWPE. Trans 30th Soc Biomater (2005) 196
26. Wang A., Essner A., Polineni V.K., et al. Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements. Tribol Int 31 (1998) 17
27. Wang A., Stark C., and Dumbleton J.H. Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses. Proc Inst Mech Eng H J Eng Med 210 Part H (1996) 141
28. National Institutes of Health. NIH consensus development conference on total knee replacement (2003). consensus.nih.gov/cons/117/117cdc_intro.htm
29. Kurtz S., Mowat F., Ong K., et al. Prevalence of primary and revision total hip and knee arthroplasty in the United States from 1990 through 2002. J Bone Joint Surg Am 87 (2005) 1487
30. Sharkey P.F., Hozack W.J., Rothman R.H., et al. Why are total knee arthroplasties failing today?. Clin Orthop 404 (2002) 7
31. Naudie D.D., and Rorabeck C.H. Sources of osteolysis around total knee arthroplasty: wear of the bearing surface. Instr Course Lect 53 (2004) 251
32. Engh G.A., and Ammeen D.J. Epidemiology of osteolysis: backside implant wear. Instr Course Lect 53 (2004) 243
33. Callaghan J.J., O'Rouke M.R., Goetz D.D., et al. Tibial post impingement in posterior-stabilized total knee arthroplasty. Clin Orthop 404 (2002) 83
34. Muratoglu O.K., Mark A., Vittetoe D.A., et al. Polyethylene damage in total knees and use of highly crosslinked polyethylene. J Bone Joint Surg Am 85 Suppl 1 (2003) 7
35. Muratoglu O.K., Bragdon C.R., O'Connor D.O., et al. Aggressive wear testing of a cross-linked polyethylene in total knee arthroplasty. Clin Orthop 404 (2002) 89
36. Muratoglu O.K., Bragdon C.R., Jasty M., et al. Knee-simulatortesting of conventional and cross-linked polyethylene tibial inserts. J Arthroplasty 19 (2004) 887
37. Muratoglu O.K., Ruberti J., Melotti S., et al. Optical analysis of surface changes on early retrievals of highly cross-linked and conventional polyethylene tibial inserts. J Arthroplasty 18 Suppl 1 (2003) 42
38. Gencur S.J., Rimnax C.M., and Kurtz S.M. Fatigue crack propagation resistance of virgin and highly crosslinked, thermally treated ultra-high molecular weight polyethylene. Biomaterials 27 (2006) 1550
39. Bradford L., Baker D.A., Graham J., et al. Wear and surface cracking in early retrieved highly cross-linked polyethylene acetabular components. J Bone Joint Surg Am 86A (2004) 1271
40. Bartel D.L., Rawlinson J.J., Burstein A.H., et al. Stresses in polyethylene components of contemporary total knee replacements. Clin Orthop 317 (1995) 76
41. Wang A., Essner A., Stark C., et al. A biaxial line-contact wear machine for the evaluation of implant bearing materials for total joint replacement. Wear 701 (1999) 225-229
42. Asano T., Clarke I., Akagi M., et al. Knee simulator wear of cross-linked polyethylene with radiation dose ranging 0 to 20 Mrad. Trans 29th Soc Biomater (2003) 37
43. Schmidig G., Essner A., and Wang A. Knee simulator wear of cross-linked UHMWPE. Trans 46th Orthop Res Soc (2000) 555
44. Essner A., Herrera L., Yau S.-S., et al. Sequentially crosslinked and annealed UHMWPE CR knee wear. Trans 51st Orthop Res Soc (2005) 312
45. Bensen L.C., DesJardins J.D., Harman M.K., et al. Effect of stair descent loading on ultra-high-molecular weight polyethylene wear in a force controlled knee simulator. Proceedings of the Institution of Mechanical Engineers 6 (2002) 409
46. Kawanabe K., Clarke I.C., Tamura J., et al. Effects of A-P translation and rotation on the wear of UHMWPE in a total knee joint simulator. J Biomed Mater Res 54 (2001) 400
47. Cottrell J.M., Babalola O., Furman B.S., et al. Stair ascent kinematics affect UHMWPE wear and damage in total knee replacements. J Biomed Mater Res 78B (2006) 15