메뉴 건너뛰기




Volumn 28, Issue 1, 2013, Pages 228-240

Comparison of the accuracy of biomet 3i encode robocast technology and conventional implant impression techniques

Author keywords

Digital scanning; Encode; Implant impressions; Robocasts

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; CIMETIDINE; TOOTH IMPLANT;

EID: 84881023132     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: 10.11607/jomi.2546     Document Type: Article
Times cited : (32)

References (44)
  • 1
    • 84971435800 scopus 로고    scopus 로고
    • Gypsum products and investments
    • Powers J (ed)., St Louis: Mosby
    • Powers J. Gypsum products and investments. In: Powers J (ed). Craig’s Restorative Dental Materials. St Louis: Mosby, 2006: 313-336.
    • (2006) Craig’s Restorative Dental Materials , pp. 313-336
    • Powers, J.1
  • 2
    • 0034168130 scopus 로고    scopus 로고
    • Study of the physical properties of type IV gypsum, resin-containing, and epoxy die materials
    • Duke P, Moore BK, Haug SP, Andres CJ. Study of the physical properties of type IV gypsum, resin-containing, and epoxy die materials. J Prosthet Dent 2000; 83: 466-473.
    • (2000) J Prosthet Dent , vol.83 , pp. 466-473
    • Duke, P.1    Moore, B.K.2    Haug, S.P.3    Andres, C.J.4
  • 3
    • 76649113554 scopus 로고    scopus 로고
    • Impression materials
    • Powers J (ed)., St Louis: Mosby
    • Powers J. Impression materials. In: Powers J (ed). Craig’s Restorative Dental Materials. St Louis: Mosby, 2006: 269-312.
    • (2006) Craig’s Restorative Dental Materials , pp. 269-312
    • Powers, J.1
  • 4
    • 48749119285 scopus 로고    scopus 로고
    • Influence of impression technique and material on the accuracy of multiple implant impressions
    • Wostmann B, Rehmann P, Balkenhol M. Influence of impression technique and material on the accuracy of multiple implant impressions. Int J Prosthodont 2008; 21: 299-301.
    • (2008) Int J Prosthodont , vol.21 , pp. 299-301
    • Wostmann, B.1    Rehmann, P.2    Balkenhol, M.3
  • 5
    • 0034185646 scopus 로고    scopus 로고
    • Evaluation of impression accuracy for osseointegrated implant supported superstructures
    • Herbst D, Nel JC, Driessen CH, Becker PJ. Evaluation of impression accuracy for osseointegrated implant supported superstructures. J Prosthet Dent 2000; 83: 555-561.
    • (2000) J Prosthet Dent , vol.83 , pp. 555-561
    • Herbst, D.1    Nel, J.C.2    Driessen, C.H.3    Becker, P.J.4
  • 6
    • 50849091256 scopus 로고    scopus 로고
    • Implant cast accuracy as a function of impression techniques and impression material viscosity
    • Walker MP, Ries D, Borello B. Implant cast accuracy as a function of impression techniques and impression material viscosity. Int J Oral Maxillofac Implants 2008; 23: 669-674.
    • (2008) Int J Oral Maxillofac Implants , vol.23 , pp. 669-674
    • Walker, M.P.1    Ries, D.2    Borello, B.3
  • 7
    • 38949213982 scopus 로고    scopus 로고
    • Effect of subgingival depth of implant placement on the dimensional accuracy of the implant impression: An in vitro study
    • Lee H, Ercoli C, Funkenbusch PD, Feng C. Effect of subgingival depth of implant placement on the dimensional accuracy of the implant impression: An in vitro study. J Prosthet Dent 2008; 99: 107-113.
    • (2008) J Prosthet Dent , vol.99 , pp. 107-113
    • Lee, H.1    Ercoli, C.2    Funkenbusch, P.D.3    Feng, C.4
  • 8
    • 52249091557 scopus 로고    scopus 로고
    • The accuracy of implant impressions: A systematic review
    • Lee H, So JS, Hochstedler JL, Ercoli C. The accuracy of implant impressions: A systematic review. J Prosthet Dent 2008; 100: 285-291.
    • (2008) J Prosthet Dent , vol.100 , pp. 285-291
    • Lee, H.1    So, J.S.2    Hochstedler, J.L.3    Ercoli, C.4
  • 9
    • 0034146316 scopus 로고    scopus 로고
    • Comparison of impression materials for direct multiimplant impressions
    • Wee AG. Comparison of impression materials for direct multiimplant impressions. J Prosthet Dent 2000; 83: 323-331.
    • (2000) J Prosthet Dent , vol.83 , pp. 323-331
    • Wee, A.G.1
  • 10
    • 0036481502 scopus 로고    scopus 로고
    • Laser digitization of casts to determine the effect of tray selection and cast formation technique on accuracy
    • Brosky ME, Pesun IJ, Lowder PD, Delong R, Hodges JS. Laser digitization of casts to determine the effect of tray selection and cast formation technique on accuracy. J Prosthet Dent 2002; 87: 204-209.
    • (2002) J Prosthet Dent , vol.87 , pp. 204-209
    • Brosky, M.E.1    Pesun, I.J.2    Lowder, P.D.3    Delong, R.4    Hodges, J.S.5
  • 11
    • 0038644505 scopus 로고    scopus 로고
    • Accuracy of open tray implant impressions: An in vitro comparison of stock versus custom trays
    • Burns J, Palmer R, Howe L, Wilson R. Accuracy of open tray implant impressions: An in vitro comparison of stock versus custom trays. J Prosthet Dent 2003; 89: 250-255.
    • (2003) J Prosthet Dent , vol.89 , pp. 250-255
    • Burns, J.1    Palmer, R.2    Howe, L.3    Wilson, R.4
  • 12
    • 0041964167 scopus 로고    scopus 로고
    • The effect of tray selection, viscosity of impression material, and sequence of pour on the accuracy of dies made from dual-arch impressions
    • Ceyhan JA, Johnson GH, Lepe X. The effect of tray selection, viscosity of impression material, and sequence of pour on the accuracy of dies made from dual-arch impressions. J Prosthet Dent 2003; 90: 143-149.
    • (2003) J Prosthet Dent , vol.90 , pp. 143-149
    • Ceyhan, J.A.1    Johnson, G.H.2    Lepe, X.3
  • 15
    • 0033218582 scopus 로고    scopus 로고
    • Accuracy of implant impression splinted techniques: Effect of splinting material
    • Assif D, Nissan J, Varsano I, Singer A. Accuracy of implant impression splinted techniques: Effect of splinting material. Int J Oral Maxillofac Implants 1999; 14: 885-888.
    • (1999) Int J Oral Maxillofac Implants , vol.14 , pp. 885-888
    • Assif, D.1    Nissan, J.2    Varsano, I.3    Singer, A.4
  • 16
    • 0027620268 scopus 로고
    • The accuracy of six impression techniques for osseointegrated implants
    • Barrett MG, de Rijk WG, Burgess JO. The accuracy of six impression techniques for osseointegrated implants. J Prosthodont 1993; 2: 75-82.
    • (1993) J Prosthodont , vol.2 , pp. 75-82
    • Barrett, M.G.1    de Rijk, W.G.2    Burgess, J.O.3
  • 17
    • 0026311384 scopus 로고
    • Comparison of impression techniques for a five-implant mandibular model
    • Carr AB. Comparison of impression techniques for a five-implant mandibular model. Int J Oral Maxillofac Implants 1991; 6: 448-455.
    • (1991) Int J Oral Maxillofac Implants , vol.6 , pp. 448-455
    • Carr, A.B.1
  • 18
    • 0027031321 scopus 로고
    • Comparison of impression techniques for a two-implant 15-degree divergent model
    • Carr AB. Comparison of impression techniques for a two-implant 15-degree divergent model. Int J Oral Maxillofac Implants 1992; 7: 468-475.
    • (1992) Int J Oral Maxillofac Implants , vol.7 , pp. 468-475
    • Carr, A.B.1
  • 19
    • 0030238164 scopus 로고    scopus 로고
    • Effects of fabrication, finishing, and polishing procedures on preload in prostheses using conventional "gold" and plastic cylinders
    • Carr AB, Brunski JB, Hurley E. Effects of fabrication, finishing, and polishing procedures on preload in prostheses using conventional "gold" and plastic cylinders. Int J Oral Maxillofac Implants 1996; 11: 589-598.
    • (1996) Int J Oral Maxillofac Implants , vol.11 , pp. 589-598
    • Carr, A.B.1    Brunski, J.B.2    Hurley, E.3
  • 20
    • 33749820665 scopus 로고    scopus 로고
    • Impression techniques for implant dentistry
    • Chee W, Jivraj S. Impression techniques for implant dentistry. Br Dent J 2006; 201: 429-432.
    • (2006) Br Dent J , vol.201 , pp. 429-432
    • Chee, W.1    Jivraj, S.2
  • 21
    • 0025412492 scopus 로고
    • An evaluation of impression techniques for osseointegrated implants
    • Spector MR, Donovan TE, Nicholls JI. An evaluation of impression techniques for osseointegrated implants. J Prosthet Dent 1990; 63: 444-447.
    • (1990) J Prosthet Dent , vol.63 , pp. 444-447
    • Spector, M.R.1    Donovan, T.E.2    Nicholls, J.I.3
  • 22
    • 7444265288 scopus 로고    scopus 로고
    • An evaluation of impression techniques for multiple internal connection implant prostheses
    • Vigolo P, Fonzi F, Majzoub Z, Cordioli G. An evaluation of impression techniques for multiple internal connection implant prostheses. J Prosthet Dent 2004; 92: 470-476.
    • (2004) J Prosthet Dent , vol.92 , pp. 470-476
    • Vigolo, P.1    Fonzi, F.2    Majzoub, Z.3    Cordioli, G.4
  • 23
    • 0038727298 scopus 로고    scopus 로고
    • Evaluation of the accuracy of three techniques used for multiple implant abutment impressions
    • Vigolo P, Majzoub Z, Cordioli G. Evaluation of the accuracy of three techniques used for multiple implant abutment impressions. J Prosthet Dent 2003; 89: 186-192.
    • (2003) J Prosthet Dent , vol.89 , pp. 186-192
    • Vigolo, P.1    Majzoub, Z.2    Cordioli, G.3
  • 24
    • 0035458837 scopus 로고    scopus 로고
    • A review of 243 errors possible during the fabrication of a removable partial denture: Part III
    • Rudd RW, Rudd KD. A review of 243 errors possible during the fabrication of a removable partial denture: Part III. J Prosthet Dent 2001; 86: 277-288.
    • (2001) J Prosthet Dent , vol.86 , pp. 277-288
    • Rudd, R.W.1    Rudd, K.D.2
  • 25
    • 0035458451 scopus 로고    scopus 로고
    • A review of 243 errors possible during the fabrication of a removable partial denture: Part II
    • Rudd RW, Rudd KD. A review of 243 errors possible during the fabrication of a removable partial denture: Part II. J Prosthet Dent 2001; 86: 262-276.
    • (2001) J Prosthet Dent , vol.86 , pp. 262-276
    • Rudd, R.W.1    Rudd, K.D.2
  • 26
    • 0035461356 scopus 로고    scopus 로고
    • A review of 243 errors possible during the fabrication of a removable partial denture: Part I
    • Rudd RW, Rudd KD. A review of 243 errors possible during the fabrication of a removable partial denture: Part I. J Prosthet Dent 2001; 86: 251-261.
    • (2001) J Prosthet Dent , vol.86 , pp. 251-261
    • Rudd, R.W.1    Rudd, K.D.2
  • 27
    • 70249122096 scopus 로고    scopus 로고
    • Randomized controlled clinical study on the accuracy of two-stage putty-and-wash impression materials
    • Haim M, Luthardt RG, Rudolph H, Koch R, Walter MH, Quaas S. Randomized controlled clinical study on the accuracy of two-stage putty-and-wash impression materials. Int J Prosthodont 2009; 22: 296-302.
    • (2009) Int J Prosthodont , vol.22 , pp. 296-302
    • Haim, M.1    Luthardt, R.G.2    Rudolph, H.3    Koch, R.4    Walter, M.H.5    Quaas, S.6
  • 28
    • 58149186732 scopus 로고    scopus 로고
    • Prosthetic transfer impression accuracy evaluation for osseointegrated implants
    • Assunção WG, Tabata LF, Cardoso A, Rocha EP, Gomes EA. Prosthetic transfer impression accuracy evaluation for osseointegrated implants. Implant Dent 2008; 17: 248-256.
    • (2008) Implant Dent , vol.17 , pp. 248-256
    • Assunção, W.G.1    Tabata, L.F.2    Cardoso, A.3    Rocha, E.P.4    Gomes, E.A.5
  • 29
    • 11444261183 scopus 로고    scopus 로고
    • Evaluation of transfer impressions for osseointegrated implants at various angulations
    • Assunção WG, Filho HG, Zaniquelli O. Evaluation of transfer impressions for osseointegrated implants at various angulations. Implant Dent 2004; 13: 358-366.
    • (2004) Implant Dent , vol.13 , pp. 358-366
    • Assunção, W.G.1    Filho, H.G.2    Zaniquelli, O.3
  • 30
    • 0027615809 scopus 로고
    • A comparative analysis of the accuracy of implant transfer techniques
    • Hsu CC, Millstein PL, Stein RS. A comparative analysis of the accuracy of implant transfer techniques. J Prosthet Dent 1993; 69: 588-593.
    • (1993) J Prosthet Dent , vol.69 , pp. 588-593
    • Hsu, C.C.1    Millstein, P.L.2    Stein, R.S.3
  • 31
  • 32
    • 2342418510 scopus 로고    scopus 로고
    • Evaluation of the accuracy of three transfer techniques for implant-supported prostheses with multiple abutments
    • Naconecy MM, Teixeira ER, Shinkai RS, Frasca LC, Cervieri A. Evaluation of the accuracy of three transfer techniques for implant-supported prostheses with multiple abutments. Int J Oral Maxillofac Implants 2004; 19: 192-198.
    • (2004) Int J Oral Maxillofac Implants , vol.19 , pp. 192-198
    • Naconecy, M.M.1    Teixeira, E.R.2    Shinkai, R.S.3    Frasca, L.C.4    Cervieri, A.5
  • 33
    • 77953574592 scopus 로고    scopus 로고
    • Effect of implant angulation, connection length, and impression material on the dimensional accuracy of implant impressions: An in vitro comparative study
    • Sorrentino R, Gherlone EF, Calesini G, Zarone F. Effect of implant angulation, connection length, and impression material on the dimensional accuracy of implant impressions: an in vitro comparative study. Clin Implant Dent Relat Res; 12(suppl 1): e63-76.
    • Clin Implant Dent Relat Res , vol.12 , pp. e63-e76
    • Sorrentino, R.1    Gherlone, E.F.2    Calesini, G.3    Zarone, F.4
  • 34
    • 0031203791 scopus 로고    scopus 로고
    • The mucosal barrier following abutment dis/reconnection An experimental study in dogs
    • Abrahamsson I, Berglundh T, Lindhe J. The mucosal barrier following abutment dis/reconnection. An experimental study in dogs. J Clin Periodontol 1997; 24: 568-572.
    • (1997) J Clin Periodontol , vol.24 , pp. 568-572
    • Abrahamsson, I.1    Berglundh, T.2    Lindhe, J.3
  • 35
    • 33644881396 scopus 로고    scopus 로고
    • A novel technique using a coded healing abutment for the fabrication of a CAD/CAM titanium abutment for an implant-supported restoration
    • Grossmann Y, Pasciuta M, Finger IM. A novel technique using a coded healing abutment for the fabrication of a CAD/CAM titanium abutment for an implant-supported restoration. J Prosthet Dent 2006; 95: 258-261.
    • (2006) J Prosthet Dent , vol.95 , pp. 258-261
    • Grossmann, Y.1    Pasciuta, M.2    Finger, I.M.3
  • 36
    • 84860882051 scopus 로고    scopus 로고
    • The accuracy of an implant impression technique using digitally coded healing abutments
    • May, Epub 2011 Mar 31
    • Eliasson A, Ortorp A. The accuracy of an implant impression technique using digitally coded healing abutments. Clin Implant Dent Relat Res 2012 May; 14(suppl 1): e30-38. Epub 2011 Mar 31.
    • (2012) Clin Implant Dent Relat Res , vol.14 , pp. e30-e38
    • Eliasson, A.1    Ortorp, A.2
  • 37
    • 79955609704 scopus 로고    scopus 로고
    • The use of a coded healing abutment as an impression coping to design and mill an individualized anatomic abutment: A clinical report
    • Telleman G, Raghoebar, G, Vissink A, Meijer H. The use of a coded healing abutment as an impression coping to design and mill an individualized anatomic abutment: A clinical report. J Prosthet Dent 2011; 105: 282-285.
    • (2011) J Prosthet Dent , vol.105 , pp. 282-285
    • Telleman, G.1    Raghoebar, G.2    Vissink, A.3    Meijer, H.4
  • 38
    • 34250313679 scopus 로고    scopus 로고
    • Treatment of an edentulous patient with CAD/ CAM technology: A clinical report
    • Drago CJ, Peterson T. Treatment of an edentulous patient with CAD/ CAM technology: A clinical report. J Prosthodont 2007; 16: 200-208.
    • (2007) J Prosthodont , vol.16 , pp. 200-208
    • Drago, C.J.1    Peterson, T.2
  • 39
    • 0038488528 scopus 로고    scopus 로고
    • Comparisons of precision of fit between cast and CNC-milled titanium implant frameworks for the edentulous mandible
    • Ortorp A, Jemt T, Back T, Jalevik T. Comparisons of precision of fit between cast and CNC-milled titanium implant frameworks for the edentulous mandible. Int J Prosthodont 2003; 16: 194-200.
    • (2003) Int J Prosthodont , vol.16 , pp. 194-200
    • Ortorp, A.1    Jemt, T.2    Back, T.3    Jalevik, T.4
  • 40
    • 0042801639 scopus 로고    scopus 로고
    • Grinding precision and accuracy of fit of CEREC 2 CAD-CAM inlays
    • Mormann WH, Schug J. Grinding precision and accuracy of fit of CEREC 2 CAD-CAM inlays. J Am Dent Assoc 1997; 128: 47-53.
    • (1997) J Am Dent Assoc , vol.128 , pp. 47-53
    • Mormann, W.H.1    Schug, J.2
  • 41
    • 0013890346 scopus 로고
    • Marginal fit of gold inlay castings
    • Christensen GJ. Marginal fit of gold inlay castings. J Prosthet Dent 1966; 16: 297-305.
    • (1966) J Prosthet Dent , vol.16 , pp. 297-305
    • Christensen, G.J.1
  • 42
    • 79951657283 scopus 로고    scopus 로고
    • Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems
    • Karatasli O, Kursoglu P, Capa N, Kazazoglu E. Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems. Dent Mater J 2011; 30: 97-102.
    • (2011) Dent Mater J , vol.30 , pp. 97-102
    • Karatasli, O.1    Kursoglu, P.2    Capa, N.3    Kazazoglu, E.4
  • 43
    • 46249120193 scopus 로고    scopus 로고
    • Marginal and internal fit of allceramic crowns fabricated with two different CAD/CAM systems
    • Lee KB, Park CW, Kim KH, Kwon TY. Marginal and internal fit of allceramic crowns fabricated with two different CAD/CAM systems. Dent Mater J 2008; 27: 422-426.
    • (2008) Dent Mater J , vol.27 , pp. 422-426
    • Lee, K.B.1    Park, C.W.2    Kim, K.H.3    Kwon, T.Y.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.