Adjunctive use of medical modeling for head and neck reconstruction

Current Opinion in Otolaryngology and Head and Neck Surgery

Volumn 21, Issue 4, 2013, Pages 335-343

  Zenga, Joseph ^a   Nussenbaum, Brian ^a  

^a WASHINGTON UNIVERSITY SCHOOL OF MEDICINE   (United States)

Author keywords

head and neck reconstruction; medical modeling; stereolithography

Indexed keywords

HEAD AND NECK SURGERY; NONBIOLOGICAL MODEL; OPERATION DURATION; PLASTIC SURGERY; PRIORITY JOURNAL; REVIEW; THREE DIMENSIONAL IMAGING; TREATMENT PLANNING;

ALGORITHMS; COMPUTER-AIDED DESIGN; HUMANS; IMAGING, THREE-DIMENSIONAL; OPERATIVE TIME; OTORHINOLARYNGOLOGIC SURGICAL PROCEDURES; PATIENT SELECTION; PROSTHESES AND IMPLANTS; RECONSTRUCTIVE SURGICAL PROCEDURES; REPRODUCIBILITY OF RESULTS; SURGERY, COMPUTER-ASSISTED; TISSUE ENGINEERING; TOMOGRAPHY, X-RAY COMPUTED;

EID: 84880921283     PISSN: 10689508     EISSN: 15316998     Source Type: Journal    
DOI: 10.1097/MOO.0b013e328362a4f5     Document Type: Review

References (100)

1. Jacobs PF. Rapid prototyping and manufacturing: Fundamentals of stereolithography. New York, NY: McGraw Hill Text; 1992.
2. Gilon D, Cape EG, Handschumacher MD, et al. Insights from threedimensional echocardiographic laser stereolithography. Effect of leaflet funnel geometry on the coefficient of orifice contraction, pressure loss, and the Gorlin formula in mitral stenosis. Circulation 1996; 94:452-459.
3. Lu S, Xu YQ, Chen GP, et al. Efficacy and accuracy of a novel rapid prototyping drill template for cervical pedicle screw placement. Comput Aided Surg 2011; 16:240-248.
4. D'Urso PS, Askin G, Earwaker JS, et al. Spinal biomodeling. Spine (Phila Pa 1976) 1999; 24:1247-1251.
5. Goiato MC, Santos MR, Pesqueira AA, et al. Prototyping for surgical and prosthetic treatment. J Craniofac Surg 2011; 22:914-917.
6. Barker TM, Earwaker WJ, Frost N, Wakeley G. Integration of 3-D medical imaging and rapid prototyping to create stereolithographic models. Australas Phys Eng Sci Med 1993; 16:79-85.
7. Sing CC, Pueh LH, Kumar AS. Automatic hole repairing for cranioplasty using Bezier surface approximation. J Craniofac Surg 2005; 16:1076-1084.
8. Fitzwater KL, Marcellin-Little DJ, Harrysson OL, et al. Evaluation of the effect of computed tomography scan protocols and freeform fabrication methods on bone biomodel accuracy. Am J Vet Res 2011; 72:1178-1185.
9. Yau YY, Arvier JF, Barker TM. Technical note: Maxillofacial biomodelling- preliminary result. Br J Radiol 1995; 68:519-523.
10. Aygun N, Zinreich SJ. Overview of diagnostic imaging of the head and neck. In: Flint PW, Haughey BH, Lund VJ, editors. Cummings Otolaryngology: Head, Neck, Surgery. Philadelphia, PA: Mosby Elsevier; 2010. pp. 130-176.
11. Chang PS, Parker TH, Patrick CW Jr, Miller MJ. The accuracy of stereolithography in planning craniofacial bone replacement. J Craniofac Surg 2003; 14:164-170.
12. Wang D, Doddrell DM, Cowin G. A novel phantom and method for comprehensive 3-dimensional measurement and correction of geometric distortion in magnetic resonance imaging. Magn Reson Imaging 2004; 22:529-542.
13. Petzold R, Zeilhofer HF, Kalender WA. Rapid protyping technology in medicine: Basics and applications. Comput Med Imaging Graph 1999; 23:277-284.
14. Barker TM, Earwaker WJ, Lisle DA. Accuracy of stereolithographic models of human anatomy. Australas Radiol 1994; 38:106-111.
15. Klein HM, Schneider W, Alzen G, et al. Pediatric craniofacial surgery: Comparison of milling and stereolithography for 3D model manufacturing. Pediatr Radiol 1992; 22:458-460.
16. Holck DE, Boyd EM Jr, Ng J, Mauffray RO. Benefits of stereolithography in orbital reconstruction. Ophthalmology 1999; 106:1214-1218.
17. Rose EH, Norris MS, Rosen JM. Application of high-tech three-dimensional imaging and computer-generated models in complex facial reconstructions with vascularized bone grafts. Plast Reconstr Surg 1993; 91:252-264.
18. Guyuron B, Ross RJ. Computer-generated model surgery. An exacting approach to complex craniomaxillofacial disharmonies. J Craniomaxillofac Surg 1989; 17:101-104.
19. Donlon WC, Young P, Vassiliadis A. Three-dimensional computed tomography for maxillofacial surgery: Report of cases. J Oral Maxillofac Surg 1988; 46:142-147.
20. Woolson ST, Dev P, Fellingham LL, Vassiliadis A. Three-dimensional imaging of bone from computerized tomography. Clin Orthop Relat Res 1986; 202: 239-248.
21. Lill W, Solar P, Ulm C, et al. Reproducibility of three-dimensional CT-assisted model production in the maxillofacial area. Br J Oral Maxillofac Surg 1992; 30:233-236.
22. Korves B, Klimek L, Klein HM, Mosges R. Image- and model-based surgical planning in otolaryngology. J Otolaryngol 1995; 24:265-270.
23. Mankovich NJ, Cheeseman AM, Stoker NG. The display of three-dimensional anatomy with stereolithographic models. J Digit Imaging 1990; 3:200-203.
24. Powers DB, Edgin WA, Tabatchnick L. Stereolithography: A historical review and indications for use in the management of trauma. J Craniomaxillofac Trauma 1998; 4:16-23.
25. Bouyssie JF, Bouyssie S, Sharrock P, Duran D. Stereolithographic models derived from x-ray computed tomography. Reproduction accuracy. Surg Radiol Anat 1997; 19:193-199.
26. Arvier JF, Barker TM, Yau YY, et al. Maxillofacial biomodelling. Br J Oral Maxillofac Surg 1994; 32:276-283.
27. Stoker NG, Mankovich NJ, Valentino D. Stereolithographic models for surgical planning: Preliminary report. J Oral Maxillofac Surg 1992; 50: 466-471.
28. Morris CL, Barber RF, Day R. Orofacial prosthesis design and fabrication using stereolithography. Aust Dent J 2000; 45:250-253.
29. Klimek L, Klein HM, Schneider W, et al. Stereolithographic modelling for reconstructive head surgery. Acta Otorhinolaryngol Belg 1993; 47:329-334.
30. Fruhwald J, Schicho KA, Figl M, et al. Accuracy of craniofacial measurements: Computed tomography and three-dimensional computed tomography compared with stereolithographic models. J Craniofac Surg 2008; 19:22-26.
31. Santler G, Karcher H, Ruda C. Indications and limitations of three-dimensional models in cranio-maxillofacial surgery. J Craniomaxillofac Surg 1998; 26:11-16.
32. D'Haese J, Van De Velde T, Komiyama A, et al. Accuracy and complications using computer-designed stereolithographic surgical guides for oral rehabilitation by means of dental implants: A review of the literature. Clin Implant Dent Relat Res 2012; 14:321-335.
33. Schicho K, Figl M, Seemann R, et al. Accuracy of treatment planning based on stereolithography in computer assisted surgery. Med Phys 2006; 33:3408-3417.
34. Berry E, Brown JM, Connell M, et al. Preliminary experience with medical applications of rapid prototyping by selective laser sintering. Med Eng Phys 1997; 19:90-96.
35. Melican MC, Zimmerman MC, Dhillon MS, et al. Three-dimensional printing and porous metallic surfaces: A new orthopedic application. J Biomed Mater Res 2001; 55:194-202.
36. Winder J, Bibb R. Medical rapid prototyping technologies: State of the art and current limitations for application in oral and maxillofacial surgery. J Oral Maxillofac Surg 2005; 63:1006-1015.
37. Lambrecht JT, Berndt DC, Schumacher R, Zehnder M. Generation of threedimensional prototype models based on cone beam computed tomography. Int J Comput Assist Radiol Surg 2009; 4:175-180.
38. Silva DN, Gerhardt De Oliveira M, Meurer E, et al. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction. J Craniomaxillofac Surg 2008; 36:443-449.
39. Meakin JR, Shepherd DE, Hukins DW. Short communication: Fused deposition models from CT scans. Br J Radiol 2004; 77:504-507.
40. Ibrahim D, Broilo TL, Heitz C, et al. Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy. J Craniomaxillofac Surg 2009; 37:167-173.
41. Cohen A, Laviv A, Berman P, et al. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009; 108:661-666.
42. Juergens P, Krol Z, Zeilhofer HF, et al. Computer simulation and rapid prototyping for the reconstruction of the mandible. J Oral Maxillofac Surg 2009; 67:2167-2170.
43. Robiony M, Salvo I, Costa F, et al. Accuracy of virtual reality and stereolithographic models in maxillo-facial surgical planning. J Craniofac Surg 2008; 19:482-489.
44. Santler G, Karcher H, Gaggl A, Kern R. Stereolithography versus milled three-dimensional models: Comparison of production method, indication, and accuracy. Comput Aided Surg 1998; 3:248-256.
45. Kermer C, Rasse M, Lagogiannis G, et al. Colour stereolithography for planning complex maxillofacial tumour surgery. J Craniomaxillofac Surg 1998; 26:360-362.
46. Prevrhal S, Fox JC, Shepherd JA, Genant HK. Accuracy of CT-based thickness measurement of thin structures: Modeling of limited spatial resolution in all three dimensions. Med Phys 2003; 30:1-8.
47. Eisele DW, Richtsmeier WJ, Graybeal JC, et al. Three-dimensional models for head and neck tumor treatment planning. Laryngoscope 1994; 104:433-439.
48. D'Urso PS, Barker TM, Earwaker WJ, et al. Stereolithographic biomodelling in cranio-maxillofacial surgery: A prospective trial. J Craniomaxillofac Surg 1999; 27:30-37.
49. Abe M, Tabuchi K, Goto M, Uchino A. Model-based surgical planning and simulation of cranial base surgery. Neurol Med Chir (Tokyo) 1998; 38:746- 750; discussion 750-741.
50. Sinn DP, Cillo JE Jr, Miles BA. Stereolithography for craniofacial surgery. J Craniofac Surg 2006; 17:869-875.
51. Lambert PM. Three-dimensional computed tomography and anatomic replicas in surgical treatment planning. Report of a case. Oral Surg Oral Med Oral Pathol 1989; 68:782-786.
52. Valentini V, Agrillo A, Battisti A, et al. Surgical planning in reconstruction of mandibular defect with fibula free flap: 15 patients. J Craniofac Surg 2005; 16:601-607.
53. Gateno J, AllenME, Teichgraeber JF, Messersmith ML. An in vitro study of the accuracy of a new protocol for planning distraction osteogenesis of the mandible. J Oral Maxillofac Surg 2000; 58:985-990; discussion 990-981.
54. Eppley BL, Sadove AM. Computer-generated patient models for reconstruction of cranial and facial deformities. J Craniofac Surg 1998; 9:548-556.
55. Wei FC, Celik N, Yang WG, et al. Complications after reconstruction by plate and soft-tissue free flap in composite mandibular defects and secondary salvage reconstruction with osteocutaneous flap. Plast Reconstr Surg 2003; 112:37-42.
56. Chepeha DB, Teknos TN, Fung K, et al. Lateral oromandibular defect: When is it appropriate to use a bridging reconstruction plate combined with a soft tissue revascularized flap? Head Neck 2008; 30:709-717.
57. Boyd JB. Use of reconstruction plates in conjunction with soft-tissue free flaps for oromandibular reconstruction. Clin Plast Surg 1994; 21: 69-77.
58. Eufinger H, Wehmoller M, Machtens E. Individual prostheses and resection templates for mandibular resection and reconstruction. Br J Oral Maxillofac Surg 1997; 35:413-418.
59. Nicholson RE, Schuller DE, Forrest LA, et al. Factors involved in long- and short-term mandibular plate exposure. Arch Otolaryngol Head Neck Surg 1997; 123:217-222.
60. Agner C, Dujovny M, Park H. Delayed minimally invasive cranioplasty. Minim Invasive Neurosurg 2003; 46:186-190.
61. Bill JS, Reuther JF, Dittmann W, et al. Stereolithography in oral and maxillofacial operation planning. Int J Oral Maxillofac Surg 1995; 24:98-103.
62. Solaro P, Pierangeli E, Pizzoni C, et al. From computerized tomography data processing to rapid manufacturing of custom-made prostheses for cranioplasty. Case report. J Neurosurg Sci 2008; 52:113-116; discussion 116.
63. Staffa G, Nataloni A, Compagnone C, Servadei F. Custom made cranioplasty prostheses in porous hydroxy-apatite using 3D design techniques: 7 years experience in 25 patients. Acta Neurochir (Wien) 2007; 149:161-170; discussion 170.
64. Wurm G, Tomancok B, Holl K, Trenkler J. Prospective study on cranioplasty with individual carbon fiber reinforced polymer (CFRP) implants produced by means of stereolithography. Surg Neurol 2004; 62:510-521.
65. Price JC, Zinreich J. Computer-fabricated custom mandibular replacement prostheses. Laryngoscope 1989; 99:222-224.
66. Tardieu PB, Vrielinck L, Escolano E. Computer-assisted implant placement. A case report: Treatment of the mandible. Int J Oral Maxillofac Implants 2003; 18:599-604.
67. Vrielinck L, Politis C, Schepers S, et al. Image-based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow-up study. Int J Oral Maxillofac Surg 2003; 32:7-14.
68. Jackson IT, Bite U. Three-dimensional computed tomographic scanning and major surgical reconstruction of the head and neck. Mayo Clin Proc 1986; 61:546-555.
69. Bell RB, Weimer KA, Dierks EJ, et al. Computer planning and intraoperative navigation for palatomaxillary and mandibular reconstruction with fibular free flaps. J Oral Maxillofac Surg 2011; 69:724-732.
70. Kernan BT, Wimsatt JA 3rd. Use of a stereolithography model for accurate, preoperative adaptation of a reconstruction plate. J Oral Maxillofac Surg 2000; 58:349-351.
71. Singare S, Dichen L, Bingheng L, et al. Design and fabrication of custom mandible titanium tray based on rapid prototyping. Med Eng Phys 2004; 26:671-676.
72. Zhang S, Liu X, Xu Y, et al. Application of rapid prototyping for temporomandibular joint reconstruction. J Oral Maxillofac Surg 2011; 69:432-438.
73. Hanasono MM, Skoracki RJ. Computer-assisted design and rapid prototype modeling in microvascular mandible reconstruction. Laryngoscope 2013; 123:597-604.
74. Panula K, Keski-Nisula L, Keski-Nisula K, et al. Costs of surgical-orthodontic treatment in community hospital care: An analysis of the different phases of treatment. Int J Adult Orthodon Orthognath Surg 2002; 17:297-306.
75. Torres K, Staskiewicz G, Sniezynski M, et al. Application of rapid prototyping techniques for modelling of anatomical structures in medical training and education. Folia Morphol (Warsz) 2011; 70:1-4.
76. Vural E, Yuen JC. Combining use of resin models with external fixation in mandibular reconstruction. Arch Otolaryngol Head Neck Surg 2007; 133:603-607.
77. Leon BR, Carrillo FJ, Gonzalez HM, Franco JL. Mandibular reconstruction with the free vascularized fibular flap: Utility of three-dimensional computerized tomography. J Reconstr Microsurg 1999; 15:91-97; discussion 97-99.
78. Buchbinder D, Urken ML, Vickery C, et al. Bone contouring and fixation in functional, primary microvascular mandibular reconstruction. Head Neck 1991; 13:191-199.
79. Yamanaka Y, Yajima H, Kirita T, et al. Mandibular reconstruction with vascularised fibular osteocutaneous flaps using prefabricated stereolithographic mandibular model. J Plast Reconstr Aesthet Surg 2010; 63:1751-1753.
80. Zinreich SJ, Mattox DE, Kennedy DW, et al. 3-D CT for cranial facial and laryngeal surgery. Laryngoscope 1988; 98:1212-1219.
81. Pham AM, Rafii AA, Metzger MC, et al. Computer modeling and intraoperative navigation in maxillofacial surgery. Otolaryngol Head Neck Surg 2007; 137:624-631.
82. Thankappan K, Trivedi NP, Subash P, et al. Three-dimensional computed tomography-based contouring of a free fibula bone graft for mandibular reconstruction. J Oral Maxillofac Surg 2008; 66:2185-2192.
83. Eckardt A, Swennen GR. Virtual planning of composite mandibular reconstruction with free fibula bone graft. J Craniofac Surg 2005; 16:1137-1140.
84. Sannomiya EK, Reis SA, Asaumi J, et al. Clinical and radiographic presentation and preparation of the prototyping model for presurgical planning in Apert's syndrome. Dentomaxillofac Radiol 2006; 35:119-124.
85. Cunningham LL Jr, Madsen MJ, Peterson G. Stereolithographic modeling technology applied to tumor resection. J Oral Maxillofac Surg 2005; 63:873-878.
86. Metzger MC, Hohlweg-Majert B, Schon R, et al. Verification of clinical precision after computer-aided reconstruction in craniomaxillofacial surgery. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2007; 104:e1-e10.
87. Zhang T, Zhang Y, Li YS, et al. [Application of CTA and CAD\CAM techniques in mandible reconstruction with free fibula flap]. Zhonghua Zheng Xing Wai Ke Za Zhi 2006; 22:325-327.
88. Xu X, Ping FY, Chen J, et al. [Application of CAD/CAM techniques in mandible large-scale defect and reconstruction with vascularized fibular bone graft]. Zhejiang Da Xue Xue Bao Yi Xue Ban 2007; 36:498-502.
89. Hirsch DL, Garfein ES, Christensen AM, et al. Use of computer-aided design and computer-aided manufacturing to produce orthognathically ideal surgical outcomes: A paradigm shift in head and neck reconstruction. J Oral Maxillofac Surg 2009; 67:2115-2122.
90. Liu XJ, Gui L, Mao C, et al. Applying computer techniques in maxillofacial reconstruction using a fibula flap: A messenger and an evaluation method. J Craniofac Surg 2009; 20:372-377.
91. Roser SM, Ramachandra S, Blair H, et al. The accuracy of virtual surgical planning in free fibula mandibular reconstruction: Comparison of planned and final results. J Oral Maxillofac Surg 2010; 68:2824-2832.
92. Farina R, Plaza C, Martinovic G. New transference technique of position of mandibular reconstructing plates using stereolithographic models. J Oral Maxillofac Surg 2009; 67:2544-2548.
93. Leiggener C, Messo E, Thor A, et al. A selective laser sintering guide for transferring a virtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps. Int J Oral Maxillofac Surg 2009; 38:187-192.
94. Yeung RW, Samman N, Cheung LK, et al. Stereomodel-assisted fibula flap harvest and mandibular reconstruction. J Oral Maxillofac Surg 2007; 65:1128-1134.
95. Bell RB. Computer planning and intraoperative navigation in craniomaxillofacial surgery. Oral Maxillofac Surg Clin North Am 2010; 22:135-156.
96. Hanasono MM, Jacob RF, Bidaut L, et al. Midfacial reconstruction using virtual planning, rapid prototype modeling, and stereotactic navigation. Plast Reconstr Surg 2010; 126:2002-2006.
97. Hou JS, Chen M, Pan CB, et al. Immediate reconstruction of bilateral mandible defects: Management based on computer-aided design/ computer-aided manufacturing rapid prototyping technology in combination with vascularized fibular osteomyocutaneous flap. J Oral Maxillofac Surg 2011; 69:1792-1797.
98. Naumann A, Aigner J, Staudenmaier R, et al. Clinical aspects and strategy for biomaterial engineering of an auricle based on three-dimensional stereolithography. Eur Arch Otorhinolaryngol 2003; 260: 568-575.
99. Cooke MN, Fisher JP, Dean D, et al. Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. J Biomed Mater Res B Appl Biomater 2003; 64:65-69.
100. Fisher JP, Vehof JW, Dean D, et al. Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model. J Biomed Mater Res 2002; 59:547-556.