Wood-Plastic Composites

Wood-Plastic Composites

Volumn , Issue , 2007, Pages 1-698

  Klyosov, Anatole A ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84890233431     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470165935     Document Type: Book

References (382)

1. Composite Decking, 2004 vs. 2005, Principia Partners, Jersey City, NJ, 2006.
2. Composite& Plastic Lumber, The Freedonia Group, Cleveland, OH, 2006.
3. Composite Decking & Railing, Principia Partners, Jersey City, NJ, 2004.
4. J. Morton. Wood-plastic composites: taking it to the next level. In: WPC Conference 2004 "Realizing the Full Potential", Principia Partners, Baltimore, MD, October 11-12, 2004.
5. Focus on Decking, The Freedonia Group, Cleveland, OH, 2003.
6. Composite and Plastic Lumber, The Freedonia Group, Cleveland, OH, 2002, p. 68.
7. W. Sigworth, L. Walp, R. Bacaloglu, and P. Kleinlauth. The role of additives in formulating WPC. In: The Global Outlook for Natural Fiber & Wood Composites 2003, New Orleans, LA, December 3-5, 2003. Principia Partners, 7th International Conference of Wood-Fibre Plastic Composites, Madison, WI, May 19-20, 2003.
8. N. Beare, J. Courtney, and S. Ratledge. New ways of assessing capital and building the value of your WPC business. WPC Conference 2004 "Realizing the Full Potential", Baltimore, MD, October 11-12, 2004.
9. Natural & Wood Fiber Composites, Vol. 4, No. 10, Principia Partners, Cleveland, OH, 2005, p. 3.
10. Natural & Wood Fiber Composites, Vol. IV, No. 10, Principia Partners, Cleveland, OH, 2005, p. 1.
11. J. F. Shakelford and W. Alexander. Materials Science and Engineering Handbook, 3rd edition, CRC Press, Boca Raton, 2001, p. 98.
12. C. Vasile and M. Pascu. Practical Guide to Polyethylene, Rapra Technology Ltd., UK, 2005, p. 19.
13. C. Vasile and M. Pascu. Practical Guide to Polyethylene, Rapra Technology Ltd., UK, 2005, p. 38.
14. G. Wypych (Ed.), Handbook of Material Weathering, 3rd edition, ChemTec Publishing, Toronto, 2003, p. 361.
15. C. Vasile and M. Pascu. Practical Guide to Polyethylene, Rapra Technology Ltd., UK, 2005, p. 67.
16. A.J. Peacock (Ed.), Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, p. 194.
17. A.J. Peacock (Ed.), Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, p. 203.
18. V. Thirtha, R. Lehman, and T. Nosker. Glass transition phenomena in melt-processed polystyrene/polypropylene blends. In: Polymer Engineering and Science, Vol. 45, No. 9, Thompson Gale, Farmington Hills, MI, 2005, pp. 1187-1193.
19. G. Wypych (Ed.), Handbook of Material Weathering, 3rd edition, ChemTec Publishing, Toronto, 2003, p. 382.
20. G. Wypych (Ed.), Handbook of Material Weathering, 3rd edition, ChemTec Publishing, Toronto, 2003, p. 383.
21. A.J. Peacock (Ed.), Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, p. 181.
22. Natural & Fiber Composites, Vol. IV, No. 9, Principia Partners, Cleveland, OH, 2005.
23. G. Wypych (Ed.), Handbook of Material Weathering, 3rd edition, ChemTec Publishing, Toronto, 2003, p. 425.
24. Natural & Fiber Composites, Vol. IV, No. 9, Principia Partners, Cleveland, OH, 2005, p. 4.
25. S.-K. Yeh, S. Agarval, and R.K. Gupta. Process development for ABS-based woodplastic composites. In: Progress in Wood-Fibre Plastic Composites 2006 International Conference, Toronto, Canada, May 1-2, 2006.
26. Plastics News, A Crain Publication, Crain Communications Inc., Chicago, IL, 2006, p. 7.
27. A.J. Peacock (Ed.), Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, pp. 681, 683, 685.
28. A.J. Peacock (Ed.), Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, p. 205.
29. A.J. Peacock (Ed.), Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, p. 200.
30. M. Sepe. The material analyst, Part 72: When investigations change direction. Injection Molding Magazine, Canon Communications, Los Angeles, CA, April 2006 (on-line edition).
31. J.F. Shakelford and W. Alexander (Eds.). Material Science and Engineering Handbook, 3rd edition, CRC Press, Boca Raton, 2001, pp. 93, 96, 681, 683, 685, 799-801, 1619.
32. A.J. Peacock. Handbook of Polyethylene: Structures, Properties, and Applications. Marcel Dekker, New York, 2000, Chapter 5, pp. 135, 138.
33. J. Fordyce. Additives market on the mend. In: Plastics Engineering, Vol. 62, No. 11, Society of Plastic Engineers, Brookfield, CT, 2006, pp. 10-12.
34. U.S. Pat. No. 5,082,605 (January 21, 1992). J.G. Brooks, B.D. Goforth, and C.L. Goforth. Method for making composite material.
35. U.S. Pat. No. 5,088,910 (February 18, 1992). B.D. Goforth, C.L. Goforth, and J.G. Brooks. System for making synthetic wood products from recycled materials.
36. U.S. Pat. No. 5,096,046 (March 17, 1992). B.D. Goforth, C.L. Goforth, and J.G. Brooks. System for making synthetic wood products from recycled materials.
37. U.S. Pat. No. 5,486,553 (January 23, 1996). M.J. Deaner, G. Puppin, and K.E. Heikkila. Advanced polymer/wood composite structural member.
38. U.S. Pat No. 5,539,027 (July 23, 1996). M.J. Deaner, G. Puppin, and K.E. Heikkila. Advanced polymer/wood composite structural member.
39. U.S. Pat. No. 5,585,155 (December 17, 1996). K.E. Heikkila and A.L. Garofalo. Fiber reinforced thermoplastic structural member.
40. U.S. Pat. No. 5,516,472 (May 14, 1996). T.C. Laver. Extruded synthetic wood composition and method for making same.
41. U.S. Pat. No. 5,746,958 (May 5, 1998). K.-A. Gustafsson, J.J. Muller, and R.A. Wittenberg. Method of producing a wood-thermoplastic composite material.
42. U.S. Pat. No. 5,851,469 (December 22, 1998). J.J. Muller and R.A. Wittenberg. Process for making a wood-thermoplastic composite.
43. U.S. Pat. No. 5,827,462 (October 27, 1998). J.R. Brandt, W.G. Taylor, and J.M. Miller. Balanced cooling of extruded synthetic wood material.
44. U.S. Pat. No. 5,866,264 (February 2, 1999). B.E. Zehner and J.R. Brandt. Renewable surface for extruded synthetic wood material.
45. U.S. Pat. No. 5,863,480 (January 26, 1999). D. Suwanda. Process for making a filler reinforced thermoplastic composites having biaxially oriented components.
46. U.S. Pat. No. 6,590,014 (July 8, 2003). P. Ruede. Non-staining polymer composite product.
47. U.S. Pat. No. 6,758,996 (July 6, 2004). Y.A. Monovoukas, S.J. Anderson, D. Leeman, A.A. Klyosov, and G.P. Philippidis. Cellulose-reinforced thermoplastic composite and methods of making same.
48. U.S. Pat. No. 3,367,917 (February 6, 1968). N.A. Granito. Melamine-formaldehyde-benzoguanamine resin and process for preparing the same.
49. U.S. Pat. No. 3,407,154 (October 22, 1968). G.S. Casebolt and D.E. Cordier. Acid amide modified urea formaldehyde alpha-cellulose filled molding compound.
50. U.S. Pat. No. 3,407,155 (October 22, 1968). G.S. Casebolt. Aminotriazine decorative, dimensionally stable molding compound containing a polymerized aromatic monomer and hydroxyl-containing vinyl monomers copolymer.
51. U.S. Pat. No. 4,282,119 (August 4, 1981). A. Tinkelenberg, H.W.L.M. Vaessen, K.W. Suen, and A.J. Van Doorn. Manufacture of chipboard having high strength and reduced formaldehyde emission, using a minor amount of protein in combination with low formaldehyde: urea resins.
52. U.S. Pat. No. 4,362,827 (December 7, 1982). A. Tinkelenberg, H.W.L.M. Vaessen, and K.W. Suen. Manufacture of chipboard.
53. U.S. Pat. No. 3,546,158 (December 8, 1970). W.C. Champion. Flooring composition.
54. U.S. Pat. No. 3,720,641 (March 13, 1973). F.M. Berardinelli. Process for producing an improved wholly automatic polyamide molding resin.
55. U.S. Pat. No. 5,288,775 (February 22, 1994). R.K. Bischoffand E.A. Witzleben. Moldable building material composites.
56. U.S. Pat. No. 5,767,177 (June 16, 1998). P. Omente and L. Landru. Injection mouldable thermosetting composition especially for motor vehicle bodies, method of production and method or recycling.
57. U.S. Pat. No. 5,767,178 (June 16, 1998). W.R. Kolker and L. Bach. Water and fire resistant materials and methods for making the same.
58. U.S. Pat. No. 5,783,125 (July 21, 1998). A.L. Bastone, L.E. Lloyd, C.D. Newby, P.R. Pelfrey, T.E. Philips, B.E. Zehner, and J.R. Brandt. Reinforced extrusion products and method of making same.
59. U.S. Pat. No. 6,291,558 (September 18, 2001). M. Raskin, L.O. Ioffe, A.Z. Pukis, and M.H. Wolf. Composition board binding material.
60. U.S. Pat. No. 6,702,969 (March 9, 2004). L.M. Matuana and J.A. King. Method of making wood-based composite board.
61. U.S. Pat. No. 3,856,724 (December 24, 1974). J.J. O'Connor and J.T. Nolan. Reinforced thermoplastic compositions.
62. U.S. Pat. No. 3,875,088 (April 1, 1975). I.J. Arons, R. Eller, and R.E. Merrill. Pencil sheath compositions.
63. U.S. Pat. No. 3,878,143 (April 15, 1975). H. Baumann, A. Kriisa, and H.E. Grahn. Method of preventing corrosion in connection with extrusion of mixtures containing polyvinyl chloride and wood flour or similar cellulosic material, and analogous mixtures containing polystyrene or acrylonitrile-butadiene-styrene resin, respectively.
64. U.S. Pat. No. 3,943,079 (March 9, 1976). P. Hamed. Discontinuous cellulose fiber treated with plastic polymer and lubricant.
65. U.S. Pat. No. 4,165,302 (August 21, 1979). C.F. Armenti and J.V. De Juneas. Filled resin compositions containing atactic polypropylene.
66. U.S. Pat. No. 4,250,064 (February 10, 1981). H. Chandler. Plastic formulation reinforced with organic fibers.
67. U.S. Pat. No. 4,339,363 (July 13, 1982). Y. Nakagima. Composite material compositions using wastepaper and method of producing same.
68. U.S. Pat. No. 4,343,727 (August 10, 1982). A. Cohen. Polyvinyl chloride shoe sole molding composition containing cellulosic fibrous flock.
69. U.S. Pat. No. 4,414,267 (November 8, 1983). A.Y. Coran and L.A. Lloyd. Method for treating discontinuous cellulose fibers characterized by specific polymer to plasticizer and polymer-plasticizer to fiber ratios, fibers thus treated and composites made from the treated fibers.
70. U.S. Pat. No. 4,559,376 (December 17, 1985). J. Kubat and T.C.F. Klason. Method of producing plastic composites filled with cellulose or lignocellulosic materials.
71. U.S. Pat. No. 5,474,722 (December 12, 1995). R.T. Eoodhams. Oriented thermoplastic and particulate matter composite material.
72. U.S. Pat. No. 6,610,232 (August 26, 2003). W.W. Jacobsen. Lignocellulose fiber filler for thermoplastic composite compositions.
73. U.S. Pat. No. 6,743,507 (June 1, 2004). F. Barlow, Y. Khanna, D.B. Pietsch, and J. Underwood. Cellulose fiber reinforced composites having reduced discoloration and improved dispersion and associated methods of manufacture.
74. U.S. Pat. No. 6,833,399 (December 21, 2004). M. Khavkine and B. Isman. Flowable flax bast fiber and flax shive blend useful as reinforcing agent.
75. U.S. Pat. No. 6,929,841 (August 16, 2005). D. Van Dijk and F.B.A. De Vries. Plasticbased composite product and method and apparatus for manufacturing same.
76. U.S. Pat. No. 6,939,496 (September 6, 2005). F.W. Maine and W.R. Newson. Method and apparatus for forming composite material and composite material therefrom.
77. U.S. Pat. No. 4,687,793 (August 18, 1987). T. Motegi, K. Aoki, and K. Kimura.. Thermoplastic resins containing gloxal heat treated cellulosic fillers.
78. U.S. Pat. No. 4,783,493 (November 8, 1988). T. Motegi, K. Aoki, and K. Kimura.. Thermoplastic resins with cellulosic filler.
79. U.S. Pat. No. 4,833,011 (May 23, 1989). K. Horimoto. Synthetic pulp and absorbent comprising the same.
80. U.S. Pat. No. 4,717,743 (January 5, 1988). H. Wakabayashi, F. Kato, T. Matsubara, and Y. Ishikawa.. Polyolefin-base resin composition.
81. U.S. Pat. No. 4,737,532 (April 12, 1988). T. Fujita and F. Nagoshi. Thermoplastic resin composition containing wood flour.
82. U.S. Pat. No. 6,368,529 (April 9, 2002). J.D. Lloyd, M.J. Manning, and F.M. Ascherl. Lignocellulose composite.
83. U.S. Pat. No. 6,527,532 (March 4, 2003). J.J. Muller, R.A. Wittenberg, and B.S. Yarmoska. Apparatus for making a wood-plastic profile.
84. U.S. Pat. No. 6,578,368 (June 17, 2003). J.R. Brandt, M.F. Kollar, and H.L. Hutchison. Cryogenic cooling of extruded and compression molded materials.
85. U.S. Pat. No. 6,627,676 (September 30, 2003). R. George, M.A. Saide, and J.G. Saide. Antimicrobial biocidic fiber-plastic composite and method of making same.
86. U.S. Pat. No. 6,827,995 (December 7, 2004). R.E. Hughes, K. Fidati, J. Schiff, J. Cuttle, and G. Vuduris.. Composites useful as fence and decking components and methods for producing same.
87. U.S. Pat. No. 6,844,040 (January 18, 2005). A.A. Pabedinskas and W.K.H. Gregori. Reinforced composite structural members.
88. U.S. Pat. No. 6,844,049 (January 18, 2005). H. Amin-Javaheri. Polyvinyl chloride/wood composite having a natural wood grain finish and a method for creating the finish.
89. U.S. Pat. No. 6,881,367 (April 19, 2005). C. Baker. Composite materials, articles of manufacture produced therefrom, and methods for their manufacture.
90. U.S. Pat. No. 6,890,637 (May 10, 2005). C. Baker. Composite materials, articles of manufacture produced therefrom, and methods for their manufacture.
91. U.S. Pat. No. 6,903,149 (June 7, 2005). N. Yasuda and H. Nemoto. Composition for wood-polymer composite and wood-polymer composite made from the composition.
92. U.S. Pat. No. 6,958,185 (October 25, 2005). B.E. Zehner. Multilayer synthetic wood component.
93. U.S. Pat. No. 4,376,144 (March 8, 1983). L.A. Goettler. Treated fibers and bonded composites of cellulose fibers in vinyl chloride polymer characterized by an isocyanate bonding agent.
94. U.S. Pat. No. 4,791,020 (December 13, 1988). B.V. Kokta. Bonded composites of cellulose fibers polyethylene.
95. U.S. Pat. No. 4,820,749 (April 11, 1989). A.D. Beshay. Reinforced polymer composites with wood fibers grafted with silanes.
96. U.S. Pat. No. 5,008,310 (April 16, 1991). A.D. Beshay. Polymer composites based cellulose-V.
97. U.S. Pat. No. 5,120,776 (June 9, 1992). G. Raj and B.V. Kokta. Process for chemical treatment of discontinuous cellulosic fibers and composites of polyethylene and treated fibers.
98. U.S. Pat. No. 4,851,458 (July 25, 1989). S. Hopperdietzel. Use of cellulose fibers for structurally modifying polyvinyl chloride articles.
99. U.S. Pat. No. 5,153,241 (October 6, 1992). A.D. Beshay. Polymer composites based cellulose-VI.
100. U.S. Pat. No. 5,952,105 (September 14, 1999). M. Medoffand A. Lagace. Poly-coated paper composites.
101. U.S. Pat. No. 5,973,035 (October 26, 1999). M. Medoffand A. Lagace. Cellulosic fiber composites.
102. U.S. Pat. No. 6,207,729 (March 27, 2001). M. Medoffand A. Lagace. Texturized cellulosic and lignocellulosic materials and compositions and composites made therefrom.
103. U.S. Pat. No. 5,981,631 (November 9, 1999). C.P. Ronden and J.C. Morin. Process for the production of composites of co-mingled thermoset resin bonded wood waste blended with thermoplastic polymers.
104. U.S. Pat. No. 6,939,903 (September 6, 2005). W.D. Sigworth, R.A. Cheney, L.M. Panzer, and H.L. Mei. Natural fiber-filled polyolefin composites.
105. U.S. Pat. No. 6,942,829 (September 13, 2005). G.W. Drabeck, J. Bravo, M. DiPierro, A.C. Andrews, J.M. McKinney, B. Hollo, and D. Chundury.. Polymer-wood composites and additive system therefor.
106. U.S. Pat. No. 6,983,571 (January 10, 2006). C.C. Felton. Composite roofing panel.
107. U.S. Pat. No. 7,041,716 (May 9, 2006). M.-T. Ton-That, F. Perrin-Sarazin, and J. Denault.. Cellulose filled thermoplastic composites.
108. U.S. Pat. No. 5,288,772 (February 22, 1994). D.N.-S. Hon. Pre-treated cellulosic materials for producing molded composite articles therefrom and process.
109. Canadian Pat. No. 2,100,320 (March 1994). M.J. Deaner, G. Puppin, and K.E. Heikkila. Advanced polymer wood composite.
110. Canadian Pat. No. 2,178,036 (December 1996). K.V. Seethamraju, N.J. Beaverson, K.E. Heikkila, and M.J. Deaner. Advanced compatible polymer wood fiber composite.
111. Canadian Pat. No. 2,242,326 (July 1997). M.J. Deaner and K.V. Seethamraju. Advanced engineering resin and wood fiber composite.
112. U.S. Pat. No. 5,827,607 (October 27, 1998). M.J. Deaner, G. Puppin, and K.E. Heikkila. Advanced polymer wood composite.
113. U.S. Pat. No. 5,948,524 (September 7, 1999). K.V. Seethamraju and M.J. Deaner. Advanced engineering resin and wood fiber composite.
114. U.S. Pat. No. 6,015,611 (January 18, 2000). M.J. Deaner, J. Puppin, and K.E. Heikkila. Advanced polymer wood composite.
115. U.S. Pat. No. 6,015,612 (January 18, 2000). M.J. Deaner, J. Puppin, and K.E. Heikkila. Polymer wood composite.
116. Canadian Pat. No. 2,250,161 (August 28, 1997). O. Grill and D.L. Turk. Interfacial blending agent for natural fiber composites.
117. U.S. Pat. No. 5,738,935 (April 14, 1998). D.L.Turk and O. Grill. Process to make a composite of controllable porosity.
118. U.S. Pat. No. 5,480,602 (January 2, 1996). L. Nagaich. Extruded particle board.
119. U.S. Pat. No. 5,635,125 (June 3, 1997). T.J. Ternes, K.K. Kimberly, and B.L. West. Method for forming simulated shake shingles.
120. U.S. Pat. No. 5,992,116 (November 30, 1999). T.J. Ternes, K.K. Ternes, and B.L. West. Simulated shake shingle.
121. Canadian Pat. No. 2,278,688 (June 17, 1999). Y. Kasahara and F. Goto. Thermoplastic composite composition reinforced with mica and wooden fiber filler.
122. U.S. Pat. No. 6,011,091 (January 4, 2000). B.E. Zehner. Vinyl based cellulose reinforced composite.
123. U.S. Pat. No. 6,248,813 (June 19, 2001). B.E. Zehner. Vinyl based cellulose reinforced composite.
124. U.S. Pat. No. 6,617,376 (September 9, 2003). A.F. Korney. Flexible wood composition.
125. U.S. Pat. No. 6,117,924 (September 12, 2000). J.R. Brandt. Extrusion of synthetic wood material.
126. U.S. Pat. No. 6,984,676 (January 10, 2006). J.R. Brandt. Extrusion of synthetic wood material.
127. U.S. Pat. No. 6,171,688 (January 9, 2001). J. Zheng, R.J. Morgan, and R. Jurek.. Material and method for the preparation thereof.
128. U.S. Pat. No. 6,265,037 (July 24, 2001). S. Godavarti, R.K. Williams, and M.J. Deaner. Polyolefin wood fiber composite.
129. U.S. Pat. No. 6,680,090 (January 20, 2004). S. Godavarti, R.K. Williams, and M.J. Deaner. Polyolefin wood fiber composite.
130. U.S. Pat. No. 6,682,789 (January 27, 2004). S. Godavarti, R.K. Williams, and M.J. Deaner. Polyolefin wood fiber composite.
131. U.S. Pat. No. 6,270,883 (August 7, 2001). K.D. Sears. R.E. Jacobson, D.F. Caulfield, and J. Underwood.. Composites containing cellulosic pulp fibers and methods of making and using the same.
132. U.S. Pat. No. 6,274,248 (August 14, 2001). F. Goto and Y. Kasahara. Thermoplastic composite composition reinforced with mica and wooden fiber filler.
133. U.S. Pat. No. 6,284,098 (September 4, 2001). W.W. Jacobsen. Lignocellulose fiber filler for thermoplastic composite compositions.
134. U.S. Pat. No. 6,337,138 (January 8, 2002). B.E. Zehner and B.K. Buhrts. Cellulosic, inorganic-filled plastic composite.
135. U.S. Pat. No. 6,344,504 (February 5, 2002). B.E. Zehner and T.C. Laver. An extruded wood simulative material is described which includes a high degree of cellulosic material content and begins with powdered thermoplastic material.
136. U.S. Pat. No. 6,498,205 (December 24, 2002). B.E. Zehner. Extrusion of synthetic wood material using thermoplastic material in powder form.
137. U.S. Pat. No. 6,511,757 (January 28, 2003). J.R. Brandt and B.E. Zehner. Compression molding of synthetic wood material.
138. U.S. Pat. No. 6,586,503 (July 1, 2003). M. Grohman. Composite products comprising cellulosic materials and synthetic resins and methods of making the same.
139. U.S. Pat. No. 6,737,006 (May 18, 2004). M. Grohman. Composite products comprising cellulosic materials and synthetic resins and methods of making the same.
140. U.S. Pat. No. 6,122,877 (September 26, 2000). G.L. Hendrickson, K.E. Heikkila, T.P. Murphy, and M.N. Goeser. Fiber-polymeric composite siding unit and method of manufacture.
141. U.S. Pat. No. 6,682,814 (January 27, 2004). G.L. Hendrickson, K.E. Heikkila, T.P. Murphy, and M.N. Goeser. Fiber-polymer composite siding unit and method of manufacture.
142. U.S. Pat. No. 6,780,359 (August 24, 2004). B.E. Zehner and J.R. Brandt. Synthetic wood composite material and method for molding.
143. U.S. Pat. No. 6,971,211 (December 6, 2005). B.E. Zehner. Cellulosic/polymer composite material.
144. U.S. Pat. No. 7,022,751 (April 4, 2006). C. Zhang and B. Casciato. Composite plastic materials produced from waste materials and method of producing same.
145. U.S. Pat. No. 5,938,994 (August 17, 1999). B.W. English and K.P. Gohr. Method for manufacturing of plastic wood-fiber pellets.
146. U.S. Pat. No. 6,210,792 (April 3, 2001). K.V. Seethamraju, N.J. Beaverson, K.E. Heikkila, and M.J. Deaner. Advanced compatible polymer wood fiber composite.
147. U.S. Pat. No. 6,255,368 (July 3, 2001). B.W. English and K.P. Gohr. Plastic wood-fiber pellets.
148. U.S. Pat. No. 6,632,863 (October 14, 2003). H.L. Hutchison and J.R. Brandt. Cellulose/polyolefin composite pellet.
149. U.S. Pat. No. 6,756,114 (June 29, 2004). F.R. Cichocki, J.L. Thomason, and T.L. Cheney. Moldable pellet based on the combination of synthetic cellulose fibers and thermoplastic polymers.
150. U.S. Pat. No. 7,052,640 (May 30, 2006). F.R. Cichocki, J.L. Thomason, and T.L. Cheney. Moldable pellet based on the combination of synthetic cellulose fibers and thermoplastic polymers.
151. U.S. Pat. No. 6,153,293 (November 28, 2000). M.E. Dahl, R.G. Rottinghaus, and A.H. Stephens. Extruded wood polymer composite and method of manufacture.
152. U.S. Pat. No. 6,342,172 (January 29, 2002). M.D. Finley. Method of forming a foamed thermoplastic polymer and wood fiber profile and member.
153. U.S. Pat. No. 6,344,268 (February 5, 2002). D.J. Stucky and R. Elinski. Foamed polymer-fiber composite.
154. U.S. Pat. No. 6,590,004 (July 8, 2003). B.E. Zehner. Foam composite wood replacement material.
155. U.S. Pat. No. 6,784,216 (August 31, 2004). B.E. Zehner and S.R. Ross. ABS foam and method of making same.
156. U.S. Pat. No. 6,863,972 (March 8, 2005). C.C. Burger, J.R. Brandt, D.W. Smith, J.P. Frechette, and K.T. Burt. Synthetic wood component having a foamed polymer backing.
157. U.S. Pat. No. 6,936,200 (August 30, 2005). C.B. Park, G.M. Rizvi, and H. Zhang.. Plastic wood fiber foam structure and method of producing same.
158. U.S. Pat. No. 5,306,550 (April 26, 1994). M. Nishiyama, J. Hosokawa, K. Yoshihara, T. Kubo, K. Kanaoka, K. Kondo, S. Maruyama, K. Tateishi, and A. Ueda.. Biodegradable composition and shaped article obtained therefrom.
159. U.S. Pat. No. 5,827,905 (October 27, 1998). E. Grigat, H.P. Muller, W. Schulz-Schlitte, A.E. Sayed, and R. Timmermann.. Biodegradable plastics filled with reinforcing materials.
160. U.S. Pat No. 6,274,652 (August 14, 2001). M. Uryu and K. Tokura. Composite polymer materials and process for producing the same.
161. U.S. Pat No. 6,479,164 (November 12, 2002). J. Lorcks, W. Pommeranz, K. Klenke, H. Schmidt, and J. Heuer.. Method for preparing composite materials from renewable raw materials.
162. S. Faehner. The economic impact of wood flour consistency in WPC applications. In: The Global Outlook for Natural Fiber & Wood Composites 2005, Lake Buena Vista, FL, November 14-16, 2005.
163. C. Clemonsmons. Use of invasive wood species in wood plastic composites: compositional differences and their effects on processing and performance. In: Progress in Wood and BioFibre Plastic Composites 2006, Toronto, Canada, May 2006.
164. M. Le Baillif and K. Oksman. The influence of the extrusion process on bleached pulp fiber and its composites. In: Progress in Wood and BioFibre Plastic Composites 2006, Toronto, Canada, May 2006.
165. M.A. Svoboda. Property profiles and structure-property relationships of polypropylenewood composites with high wood content. In: Wood-Plastic Composites, A Sustainable Future. The International Conference, Vienna, Austria, May 14-16, 2002.
166. N.M. Stark and M.J. Berger. Effect of particle size on properties of wood-flour reinforced polypropylene composites. In: Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 12-14, 1997, pp. 134-143.
167. A. Bismark, S. Mishra, and T. Lampke. Plant fibers as reinforcement for green composites. In: A.K. Mahanty, M. Misra, and L.T. Drzal (Eds.), Natural Fibers, Biopolymers, and Biocomposites, Taylor & Francis, CRC, Boca Raton, 2005, p. 65.
168. K. Williams. Automotive industry uses of natural fiber reinforced composites. In: The Global Outlook for Natural Fiber & Wood Composites 2003, Intertech, New Orleans, LA, December 2003.
169. L. Magdzinski. Quality-certified specialty cellulose and wood fibers for composites from market pulp producers. In: Progress in Wood and BioFibre Plastic Composites 2006, Toronto, Canada, May 2006.
170. M.M. Stark and R.E. Roland. Effects of wood fiber characteristics on mechanical properties of perties of wood/polypropylene composites. Wood J Fiber Sci., 2003, 35(2), 167-174.
171. M.A. Svoboda and R.W. Lang. Property profiles and structure-property relationships of polypropylene-wood-composites with high wood content. In: Wood-Plastic Composites, A Sustainable Future. The International Conference, Vienna, Austria, May 14-16, 2002.
172. K. Gehrmann, M. Busch, S. Meinicke, R. Starke, and A. Krombholz. The influence of fibre geometry of different natural fibres and different PP grades on key properties of composites and extruded hollow profiles. First experiences with the industrial profile extrusion line. In: Fifth Global Wood and Natural Fibre Composites Symposium, Kassel, Germany, April 27-28, 2004.
173. N.M. Stark. The effect of weathering variables on the lightness of HDPE/WF composites. In: Eighth International Conference on Woodfiber Composites, Madison, WI, May 23-25, 2005.
174. S. Snell, J. Hague, and L. Groom. Characterizing agrofibers for use in composite materials. In: The Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 1997, pp. 5-11.
175. U.S. Pat. No. 5,730,371 (March 24, 1998). P.A. Dangieux, S.J. Anderson, and R. L. Yoder. Delumper.
176. G. Wypych. Handbook of Fillers, 2nd edition, ChemTec Publishing, Toronto, New York, 1999, p. 890.
177. B. English, N. Stark, and C. Clemons. Weight reduction: wood versus mineral fillers in polypropylene. In: Fourth International Conference on Wood-Plastic Composites, Forest Product Society, Madison, WI, May 12-14, 1997, pp. 237-244.
178. T. Dombrowski. Carbonate minerals in wood polymer composites (WPC). In: WPCs 2006, The Changing Technology in WPCs. The First World Congress on Woodfiber/Plastics and Related Composites, San Francisco, CA, April 2-4, 2006.
179. K. Kuck and H. Hansen. Mineral based concentrates for polypropylene injection molding: combining value and performance. In: Fifteenth International Conference Additives 2006. Plastic Additives for Special Effects, ECM, Plymouth, MI, Las Vegas, NV, January 30-February 1, 2006.
180. T. Dombrowski. Phyllosilixates in WPC applications: Talc and MinFlex™. In: WPCs 2006, The Changing Technology in WPCs. The First World Congress on Woodfiber/Plastics and Related Composites, San Francisco, CA, April 2-4, 2006.
181. O. Noel and R. Clark. The use of talc in wood-plastic composites. In: Progress in Woodfibre-Plastic Composites, Canadian Natural Composites Council; University of Toronto, Canada, Toronto, 2004.
182. O. Noel and R. Clark. Recent advances in the use of talc in wood-plastic composites. In: The Global Outlook for Natural Fiber & Wood Composites, Intertech, Portland, ME, New Orleans, LA, December 8-10, 2004.
183. O. Noel and R. Clark. Recent advances in talc-reinforced wood-plastic composites. In: Intertech's 4th Conference of Natural Fiber & Wood Composites, Intertech, Portland, ME, Orlando, FL, 2005.
184. T. Dombrowski. Mica in oriented polypropylene WPC. In: WPCs 2006, The Changing Technology in WPCs. The First World Congress on Woodfiber/Plastics and Related Composites, ECM, Plymouth, MI, San Francisco, CA, April 2-4, 2006.
185. U.S. Department of Transportation/Federal Highway Administration Report No. FHWASA-94-081, Fly ash facts for highway engineers, August 1995.
186. Electric Power Research Institute, Report CS-4765, September 1986.
187. U.S. Pat. No. 5,868,084 (1999). A. Bachik. Apparatus and process for carbon removal from fly ash.
188. U.S. Pat. No. 5,887,724 (1999). T.E. Weyand and C.J. Koshinski. Methods of treating bi-modal fly ash to remove carbon.
189. U.S. Pat. No. 6,068,131 (2000). R.W. Styron and J.-Y. Hwang. Method of removing carbon from fly ash.
190. U.S. Pat. No. 6,599,358 (2003). B.E. Boggs. Carbon scavenger fly ash pretreatment method.
191. U.S. Pat. No. 6,708,909 (2004). Y. Toda, S. Kojima, and T. Yamamoto. Separation device for unburned carbon in fly ash and separation method.
192. U.S. Pat. No. 6,730,161 (2004). V.I. Lakshmanan, R. Sridhar, N.P. Mailvaganam, and V.M. Malhotra. Treatment of fly ash.
193. U.S. Pat. No. 6,783,739 (2004). R.F. Altman. Fly ash treatment by in situ ozone generation.
194. U.S. Pat. No. 6,890,507 (2005). X. Chen, Y. Gao, R.H. Hurt, E.M. Suuberg, and A.K. Mehta. Ozone treatment of fly ash.
195. U.S. Pat. No. 6,916,863 (2005). R.T. Hemmings, R.L. Hill, and B.J. Cornelius. Filler comprising fly ash for use in polymer composites.
196. U.S. Pat. No. 4,058,406 (1977). D.A. Raponi. Cementitious composition.
197. U.S. Pat. No. 4,165,302 (1979). C.F. Armenti and J. V. De Juneas. Filled resin compositions containing atactic polypropylene.
198. J. J. Balatinecz, M. I. Khavkine, S. Law, and V. Kovac. Properties of polyolefin composites with blends of wood flour and coal ash. In: Fifth International Conference on Woodfiber-Plastic Composites, Forest Products Society, Madison, WI, May 26-27, 1999, pp. 235-240.
199. S.-K. Yeh, A. Al-Mulla, and R.K. Gupta. Influence of the coupling agent of polypropylene/clay nanocomposite-based wood-plastic composites. ANTEC, Society of Plastic Engineers, Brookfield, CT, 2005, pp. 1290-1294.
200. Y.H. Lee, T. Kuboki, C.B. Park, and M. Sain. Processing-property behaviors of PP/rice hull and PP/rice hull/nano-clay composites. In: The Global Outlook for Natural Fiber & Wood Composites, Intertech, Portland, ME, Lake Buena Vista, FL, 2005.
201. W.S. Gutowski. Physical model of interface and interphase performance in composite materials and bonded polymers. In: Second International Wood and Natural Fibre Composites Symposium, Kassel, Germany, June 28-29, 1999, pp. 6-1-6-11.
202. C.A. Correa, C.A. Razzino, and E. Hage. DMTA analysis of interface adhesion in woodplastic composites. In: Eighth International Conference on Woodfiber-Plastic Composites (and Other Natural Fibers), Madison, WI, 2005.
203. J. Markarian. Wood-plastic composites: current trends in materials and processing. In: Plastics Additives & Compounding, September-October 2005, pp. 20-26.
204. D. Dean. Influence of ethylene-anhydride copolymer coupling agents on the mechanical properties of HDPE based wood polymer composites. In: Progress in Wood Fibre Plastic Composites 2006 International Conference, Toronto, Canada, May 1-2, 2006.
205. M. Kazayawoko and J.J. Balatinecz. Adhesion mechanisms in woodfiber-polypropylene composites. In: Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 12-14, 1997, pp. 81-93.
206. J.-R. Schauder. Exxelor coupling agents for wood fibers reinforced composites. In: Wood fibre Polymer Composites Symposium. Application and Trends, Bordeaux, France, March 27-28, 2003.
207. M. Sain, S. Law, F. Suhara, and A. Bouiloux. Interface modification and stiffness correlation of natural fibre-polyolefin composite products. In: Wood fibre Polymer Composites Symposium. Application and Trends, Bordeaux, France, March 27-28, 2003.
208. A.K. Bledzki, V.E. Sperber, K. Specht, M.A. Letman and A. Viksne. Effect of defined waxes and coupling agents on moisture behavior of injection molded woodfiber-reinforced PP composites. In: Eighth International Conference on Woodfiber-Plastic Composites (and Other Natural Fibers), Madison, WI, May 23-25, 2005.
209. J.D. Umpleby. Material choice for wood-plastic composites. In: Wood-Plastic Composites-A Sustainable Future. International Conference, Vienna, Austria, May 14-16, 2002.
210. J. Gassan and A.K. Bledzki. Dynamic-mechanical properties of natural fiber-reinforced plastics: the effect of coupling agents. In: Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 12-14, 1997, pp. 76-80.
211. M. Bengtsson, N.M. Stark, and K. Oksman. Crosslinked wood-thermoplastic composites-profile extrusion and properties. In: Progress in Wood Fibre Plastic Composites 2006 International Conference, Toronto, Canada, May 1-2, 2006.
212. L. Manolis Sherman. Wood-filled plastics-they need the right additives for strength, good looks & long life. Plastics Technology, July 2004.
213. L. Manolis Sherman. Close-up on technology-additives loads of new additives & colorants to debut at K 2004. Plastics Technology, September 2004.
214. C. Zhang, K. Li, and J. Simonsen. Improvement of interfacial adhesion between wood and polypropylene in wood-polypropylene composites. J. Adhesion Sci. Technol., 2004, 18(14), 1603-1612.
215. C. Zhang, K. Li, and J. Simonsen. A novel wood-binding domain of a wood-coupling agent: development and characterization. J. Appl. Polym. Sci., 2003, 89, 1078-1084.
216. Laurent M. Matuana. Resistance of HDPE/wood-flour composites to cyclic freezing and thawing exposures. In: Eighth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 23-25, 2005.
217. D. Feng and A.R. Sanadi. Effect of compatibilizer on the structure-property relationships of kenaf fiber-polypropylene composites. In: Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 12-14, 1997, pp 157-160.
218. A.R. Sanadi and D.F. Caufield. Interphase effects on the mechanical and physical behavior of natural fiber composites. In: Second International Wood and Natural Fibre Composites Symposium, Kassel, Germany, June 28-29, 1999, pp. 9.1-9.18.
219. K. Oksman and C. Clemons. Effect of elastomers and coupling agent on impact performance of wood flour-filled polypropylene. In: Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 12-14, 1997, pp. 144-155.
220. B. Sigworth, L. Walp, R. Bacaloglu, and P. Kleinlauth. The role of additives in formulating WPC. In: The Role of Additives in Formulating Wood-Plastic Composites, The Global Outlook for Natural Fiber & Wood Composites 2003, New Orleans, LA, December 3-5.
221. B. Sigworth. Additives for wood-filled polyolefins. Coupling agents. In: Progress in Woodfibre-Plastic Composites Conference 2002, Toronto, Canada, May 23-24, 2002.
222. M. Bengtsson and K. Oksman. One-step process of silane crosslinked polyethylene/wood flour composites. In: Eighth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 23-25, 2005.
223. D. Dean. Development of enhanced anhydride coupling agents for wood polymer composites. In: WPC Conference 2004 "Realizing the Full Potential," Baltimore, MD, October 11-12.
224. S.-K. Yeh, A. Al-Mulla, and R.K. Gupta. Influence of the coupling agent on polypropylene/clay nanocomposite-based wood-plastic composites. In: ANTEC 2005, pp. 1290-1295.
225. M.G. Botros. Development of new generation coupling agents for wood-plastic composites. In: The Global Outlook for Natural Fiber & Wood Composites 2003, New Orleans, December 3-5, 2003.
226. T.J. Keener. New maleated polyethylene (MaPE) couplers. In: Seventh International Conference on Woodfiber-Plastic Composites, Madison, WI, May 19, 2003.
227. A.G. McDonald, L.W. Gallagher, S.T. Sundar, and M.P. Wolcott. The effect of wood surface modification and particle size on wood plastic composite performance. In: Eighth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 23-25, 2005.
228. C. Burgstaller and W. Stadlbauer. Investigation of the effects of coupling agents in wood plastic composites. In: Progress in Wood Fibre Plastic Composites 2006 International Conference, Toronto, Canada, May 1-2, 2006.
229. J. Simonsen, R. Jacobson and R. Rowell. Wood fiber reinforcement of styrene-maleic anhydride copolymers. In: Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 12-14, 1997, pp. 215-220.
230. M.M. Stark and R.E. Rowlands. Effect of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood Fiber Sci., 2003, 35(2), 167-174.
231. T.G. Rials, N.Labbe, S.S. Kelley, and D.J. Gardner. Near infrared spectroscopy assessment of wood-polyolefin extruded composites. In: Eighth International Conference on Woodfiber-Plastic Composites (and Other Natural Fibers), Madison, WI, 2005.
232. V. Hristov and S. Vasileva. Dynamic mechanical and thermal properties of modified poly(propylene) wood fiber composites. Macromol. Mater. Eng., 2003, 288(10), 798-806.
233. D. Harper and M. Wolcott. Interaction between coupling agent and lubricants in woodpolypropylene composites. Composites, Part A, 2004, 35, 385-394.
234. R.M. Rowell, S.E. Lange, and R.E. Jacobson. Effects of moisture on aspen-fiber/polypropylene composites. In: Woodfibre-Plastic Composites Progress, Toronto, Canada, May 23-24, 2002.
235. R. Kahraman, S. Abbasi, and B. Abu-Sharkh. Influence of Epolene G-3003 as a coupling agent on the mechanical behavior of palm fiber-polypropylene composites. Int. J. Polym. Mater., 2005, 54(6), 483-503.
236. D.J. Bridgeford, 1963, U.S. Pat. No. 3,083,118.
237. A.A. Gulina, R.M. Livshits, and Z.A. Rogovin. Synthesis of cellulose-polyacrylonitrile graft copolymers in the presence of the oxidation-reduction system cellulose Fe2+-H2O2. II. Investigation of the effect of initiation conditions on the polymerization coefficient of polyacrylonitrile and the degree of conversion of cellulose. Vysokomol. Soyed., 1965, 7(9), 1529-1534.
238. U.S. Pat. No. 3,359,224 (1967). R.W. Faessinger and J.S. Conte.
239. H. Matsuda. Preparation and utilization of esterified woods bearing carboxyl groups. Wood Sci. Technol., 1987, 21(1), 75-88.
240. H. Matsuda. Preparation and properties of oligoesterified wood blocks based on anhydride and epoxide. Wood Sci. Technol., 1992, 27(1), 23-34.
241. J.M. Felix and P. Gatenholm. Formation of entanglements at brushlike interfaces in cellulose-polymer composites. J. Appl. Polym. Sci., 1993, 50(4), 699-708.
242. C.Q. Yang. Infrared spectroscopy studies of the effects of the catalyst on the ester cross-linking of cellulose by poly(carboxylic acids). J. Appl. Polym. Sci., 1993, 50(12), 2047-2053.
243. J.M. Felix, P. Gatenholm, and H.P. Schreiber. Controlled interactions in cellulosepolymer composites. 1: effect on mechanical properties. Polym. Composites, 1993, 14(6), 449-457.
244. J. Schofield. New coupling agents enhance mechanical properties in filled polymers. In: Plastics Additives & Compounding, March/April 2005.
245. D. Dean. Influence of ethylene-anhydride copolymer coupling agents on the mechanical properties of HDPE based wood polymer composites. In: Proceedings of Progress in Wood Fibre Plastic Composites 2006 International Conference, Toronto, Canada, May 1-2, 2006.
246. R.H. White and M.A. Dietenberger. Fire Safety. Wood Handbook, Forest Products Society, Madison, WI, 1999, Chapter 17, p. 17.7.
247. A.J. Peacock. Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, p. 203.
248. W.C. Young. Roark's Formulas for Stress and Strain, 6th edition, McGraw-Hill, Inc., New York, 1989, p. 101.
249. J.F. Shackelford and W. Alexander, CRC Material Science and Engineering Handbook, 3rd edition, CRC Press, Boca Raton, FL, 2001, pp. 794-802.
250. F. Shackelford and W. Alexander. CRC Material Science and Engineering Handbook, 3rd edition, CRC Press, Boca Raton, FL, 2001, p. 600-606.
251. M.A. Svoboda and R.W. Lang. Property profiles and structure-property-relationships of polypropylene-wood-composites with high wood content. In: Wood-Plastic Composites, A Sustainable Future. The Proceedings of International Conference, Applied Market Information, Bristol, UK, Vienna, Austria, May 14-16, 2002.
252. R.M. Rowell, Specialty treatments. In: Wood Handbook, Forest Products Society, Madison, WI, 1999, p. 19-7.
253. J.F. Shackelford and W. Alexander. CRC Material Science and Engineering Handbook, 3rd edition, CRC Press, Boca Raton, FL, 2001, p. 679-680.
254. A.J. Peacock. Handbook of Polyethylene: Structure, Properties, and Applications, Marcel Dekker, New York, 2000, p. 133.
255. A.J. Peacock. Handbook of Polyethylene: Structure, Properties, and Applications, Marcel Dekker, New York, 2000, p. 146.
256. W.M.D. Bryant, R.H.H. Pierce Jr., C.R. Lindegren, and R. Roberts. Nucleation and growth of crystallites in high polymers. Formation of spherulites. J. Polym. Sci. 1955, 16(82), 131-142.
257. J.F. Shackelford and W. Alexander, CRC Material Science and Engineering Handbook, 3rd edition, CRC Press, Boca Raton, FL, 2001, pp. 510-513.
258. B.W. english and R.H. Falk. Factors that affect the application of woodfiber-plastic composites. In: Proceedings of the Forest Products Society No. 7293, Forest Products Society, Madison, WI, 1996. pp. 189-194.
259. D.A. Johnson, D.A. Johnson, J.L. Urich, R.M. Rowell, R. Jacobson, and D.F. Caufield. Weathering characteristics of fiber-polymer composites. In: Fifth International Conference on Woofiber-Plastic Composites, Forest Products Society, Madison, WI, May 26-27, 1999.
260. D.J. Gardner and N.M. Stark. Understanding the durability of wood-plastic composites. In: The Global Outlook for Natural Fiber and Wood Composites, Intertech, Portland, ME, New Orleans, LA, December 8-10, 2004.
261. W. Simpson and A. TenWolde. Physical properties and moisture relations of wood. In: Wood Handbook, Forest Products Society, Madison, WI, 1999, Chapter 3, pp. 3-21.
262. R.A. Serway. Physics for Scientists and Engineers, 4th edition, Harcorut Brace College Publishers, Orlando, FL, 1995, p. 126.
263. A.J. Peacock. Handbook of Polyethylene: Structures, Properties, and Applications, Marcel Dekker, New York, 2000, p. 203.
264. J.F. Shackelford and W. Alexander (Eds.), CRC Materials Science and Engineering Handbook, 3rd edition, CRC Press, Boca Raton, FL, 2001, pp. 736, 1651.
265. P. Krishnaswamy and R. Lampo. From waste plastics to markets for plastic-lumber bridges. ASTM Standardization News, American Society for Testing Materials, West Conshohocken, PA, December 2001.
266. Forest Products Laboratory. Wood Handbook, 1999, pp. 3-5.
267. W. Wang and J.J. Morrell. Water sorption characteristics of two wood-plastic composites. Forest Prod. J. 2004, 54(12), pp. 209-212.
268. M. Manning. Borates as biocidal additives for WPC. In: The Global Outlook for Natural Fiber and Wood Composites 2003, New Orleans, LA, December 3-5, 2003.
269. M. Gnatowski. Water absorption by wood-plastic composites in exterior exposure. 8th International Conference on Woodfiber-Plastic Composites (and Other Natural Fibers), Madison, WI, May 23-25, 2005.
270. Forest Products Laboratory. Wood Handbook, 1999, pp. 12-16 to 12-17.
271. M. Manning. Creating value in WPC products with anti-microbials and stain resistant additives. In: WPC Conference 2004, Baltimore, MD, Principia Partners, Cleveland, OH, October 11-12, 2004.
272. J. Kajaks and S. Reihmane. Thermal and water sorption properties of polyethylene and linen yarn production waste composites. In: 2nd International Wood and Natural Fibre Composites Symposium, Universitat Gesamthochschule Kassel, Institut fur Werkstofftechnik, Kassel, Germany, 1999, pp. 39/1-39/5.
273. R.M. Rowell, S.E. Lange, R.E. Jacobson. Effects of moisture on aspen-fiber/polypropylene composites. In: Progress in Woodfibre-Plastic Composites, Conference Proceedings, Canadian Natural Composites Council, University of Toronto, Toronto, Canada, 2002.
274. F. Yehia, S. Law, M.T. Kortschot. Water absorption in wood fiber reinforced polyethylene. In: Progress in Woodfibre-Plastic Composites, Conference Proceedings, Canadian Natural Composites Council, University of Toronto, Toronto, Canada, 2002.
275. L.M. Matuana. Resistance of HDPE/wood-flour composites to cyclic freezing and thawing exposures. In: 8th International Conference on Woodfiber-Plastic Composites, Forest Products Society, Madison, WI, May 23-25, 2005.
276. W. Wang and J.J. Morrell. Water sorption characteristics of two wood-plastic composites. Forest Prod. J., 2004, 54(12), 209-212.
277. M. Manning. Borates as biocidal additives for WPC. In: The Global Outlook for Natural Fiber & Wood Composites 2003, New Orleans, LA, December 3-5, 2003.
278. U.S. Pat. No. 6,495,134. B.L. Illman, V.W. Yang, L.A. Ferge. http://www.emlab.com/app/fungi/Fungi.po
279. M. Manning. Creating value in WPC products with antimicrobials and stain resistant additives. WPC Conference 2004, Principia Partners, Cleveland, OH, Baltimore, MD, October 11-12, 2004.
280. M. Mankowski and J.J. Morrell, Wood Fiber Sci., 2000, 32(3), 340-345.
281. S.A. Verhey and P.E. Laks. Strength loss following fungal attack on wood fiber/thermoplastic composites. In: Progress in Woodfibre-Plastic Composites, Conference Proceedings, Toronto, Canada, May 23-24, 2002.
282. J.A. Silva Guzman, J.J. Morrell, and B.L. Gartner. Comparison of agar (MEA and DPA) and soil block tests for assessing decay of wood plastic composites. In: Eighth International Conference on Woodfiber Composites, Madison, WI, May 23-25, 2005.
283. S.A. Verhey and P.E. Laks, Wood particle size affects the decay resistance of woodfiber/thermoplastic composites. Forest Prod. J., 2002, 52, 78-81.
284. C. Clemons and R. Ibach. Fungal exposure of wood filled polyethylene composites: laboratory evaluation. In: Progress in Woodfibre-Plastic Composites, Conference Proceedings, Canadian Natural Composites Council, University of Toronto, Toronto, Canada, May 23-24, 2002.
285. P.E. Laks, J.K. Vehring, S.A. Verhey, and D.L. Richter. Effect of manufacturing variables on mold susceptibility of wood-plastic composites. In: Eighth International Conference on Woodfiber-Plastic Composites (and Other Natural Fibers). Forest Products Society, Madison, WI, May 23-25, 2005.
286. U.S. Pat. No. 6,368,529. J.D. Lloyd, M.J. Manning, and F.M. Ascherl. Lignocellulosic composite.
287. R.E. Ibach. Moisture and fungal evaluations for natural durability of compression molded fiber-plastic composites. In: Progress in Wood-Fibre Plastic Composites 2006 International Conference, Toronto, Canada, May 1-2, 2006.
288. W. Woods. Efficacy of a unique fungicide in wood filled plastic. In: Conference Proceedings of Durability in Wood Plastic & Natural Fiber Composites 2006, Intertech, Portland, ME, San Antonio, TX, December 4-5, 2006.
289. E.W. Flick (Ed.), Plastic Additives, Vol. 1, Noyes Publications William Andrew Publishing, Norwich, New York, 2001, p. 107.
290. G. Capocci, U. Stadler, and M. Reyes. Anti-staining and anti-fungal additives for woodfiber-plastic composites. In: Conference Proceedings of the Global Outlook for Natural Fiber & Wood Composites 2004, Intertech, Portland, ME, New Orleans, LA, December 8-10, 2004.
291. R.H. White and M.A. Dietenberger. Fire safety. In: Wood Handbook, Forest Products Society, Madison, WI, 1999, Chapter 17, p. 17-3.
292. C. Vasile and M. Pascu. Practical Guide to Polyethylene. Rapra Technology, Rapra Technology Ltd. UK, 2005, p. 93.
293. R.H. White and M.A. Dietenberger. Fire safety, In: Wood Handbook, Forest Products Laboratory, 1999, Chapter 17, p. 17-7.
294. J. Troitzsch. Plastics Flammability Handbook. Principles, Regulations, Testing, and Approval. 3rd edition, Hanser, Munich-Cincinnati, 2004, p. 18.
295. Natural & Wood Fiber Composites, Vol. IV, No. 9, Principia Partners, Cleveland, OH, September 2005, p. 2
296. J. Troitzsch. Plastics Flammability Handbook. Principles, Regulations, Testing, and Approval. 3rd edition, Hanser, Munich-Cincinnati, 2004, p. 146.
297. J. Andrews. Flame retardants for the future today. In: 15th International Conference ADDITIVES 2006, Plastics Additives for Special Effects, ECM, Plymouth, MI, Las Vegas, NV, January 30-February 1, 2006.
298. P. Moy. Recyclability of FR-PC/ABS composites using non-halogen flame retardants. In: 15th International Conference ADDITIVES 2006, Plastics Additives for Special Effects, ECM, Plymouth, MI, Las Vegas, NV, January 30-February 1, 2006.
299. R.B. Dawson and S.D. Landry. The issues & regulatory status for flame retardants. In: 15th International Conference ADDITIVES 2006, Plastics Additives for Special Effects, ECM, Plymouth, MI, Las Vegas, NV, January 30-February 1, 2006.
300. Chem. Eng. News, American Chemical Society, Washington, DC, June 26, 2006, p. 8.
301. R.L. Markezich. Clorine containing flame retardants. In: 15th International Conference ADDITIVES 2006, Plastics Additives for Special Effects, ECM, Plymouth, MI, Las Vegas, NV, January 30-February 1, 2006.
302. J. Troitzsch. Plastics Flammability Handbook. Principle, Regulations, Testing, and Approval, 3rd edition, Hanser, Munich-Cincinnati, 2004, p. 147.
303. G. Beyer. Nanocomposites offer new way forward for flame retardants. Plastic Addit. Compd., 2005, 7(5), p. 32-35.
304. G. Guo, Y.H. Lee, Y.S. Kim, C.B. Park, and M. Sain, Flame retarding effects of nanoclay on wood-fiber composites, In: The Global Outlook for Natural Fiber & Wood Composites 2004, Intertech, Portland, ME, New Orleans, LA, December 8-10, 2004.
305. J. Innes, A. Innes, M. Wajer, D. Smith, and L. Granada. Nano materials as flame retardants in metal hydrate FR formulations. In: 15th International Conference ADDITIVES 2006, Plastics Additives for Special Effects, ECM, Plymouth, MI, Las Vegas, NV, January 30-February 1, 2006.
306. D.C. Wright. Failure of Polymer Products Due to Thermo-Oxidation, Rapra Review Reports, Report 131, Vol. 11, No. 11, 2001, pp. 8-9.
307. C. Vasile and M. Pascu. Practical Guide to Polyethylene. RAPRA Technology, Rapra Technology Ltd., UK, 2005, p. 79.
308. D.C. Wright. Failure of Polymer Products Due to Thermo-Oxidation. Rapra Review Reports, Report 131, Vol. 11, No. 11, 2001, pp. 13-14.
309. S. Ding, M.T.K. Ling, A. Khare, and L. Woo, Activation energies of polymer degradation, In: J. Moalli (Ed.), Plastic Failure: Analysis and Prevention, Plastics Design Library, Norwich, NY, 2001, pp. 219-225.
310. L. Woo, S.Y. Ding, A Khare, and M.T.K. Ling. Failure progression and mechanisms of irradiated polypropylenes and other medical polymers. In: G. Wypych (Ed.), Weathering of Plastics. Testing to Mirror Real Life Performance, Plastic Design Library, 1999.
311. R.M. Suffield, S.H. Dillman, and J.E. Haworth. Performance of tocopherols as antioxidants in ABS. ANTEC, Society of Plastic Engineers, Brookfield, CT, Boston, MA, May 1-5, 2005.
312. R.M. Suffield, J.E. Kiesser, and S.H. Dillman. Antioxidant performance of mixed tocopherols in styrenic block copolymers. In: Proceedings: ANTEC, Society of Plastic Engineers, Brookfield, CT, Boston, MA, May 1-5, 2005.
313. K. Pielichowski and J. Njuguna. Thermal Degradation of Polymeric Materials. Rapra Technology, Rapra Technology Ltd., UK, 2005, p. 20.
314. G. Wypych. Handbook of Material Weathering, 3rd edition, William Andrew Publishing, Toronto, 2003, p. 316.
315. D.C. Wright. Failure of Polymer Products Due to Thermo-Oxidation. Rapra Review Reports, Report 131, Vol. 11, No. 11, 2001, p. 12.
316. N.S. Allen and A. Parkinson, Polymer Degradation and Stability, 1983, Vol. 5, No. 3, p. 189; cit. from D. Wright, Failure of Plastics and Rubber Products. Causes, Effects and Case Studies Involving Degradation. Rapra Technology Ltd., UK, 2001, pp. 84.
317. G. Wypych Handbook of Material Weathering, 3rd edition, William Andrew Publishing, Toronto, 2003, pp. 666-667.
318. J. Rediske. Improved look and appearance for wood-plastic composites after weathering. In: Proceedings of Progress in Woodfibre-Plastic Composites. Canadian Natural Composites Council, University of Toronto, Toronto, Canada, May 23-24, 2002.
319. K. O'Connor. WPC's: increasing need for color stability. In: Proceedings of WPC Conference 2004 "Realizing the Full Potential," Baltimore, MD, October 11-12, 2004.
320. C. Vasile and M. Pascu. Practical Guide to Polyethylene, Rapra Technology, UK, 2005, p. 79.
321. B.M. Klemann. Correlations between xenon arc accelerated weathering tests and outdoor weathering. Material Testing Product and Technology News, Vol. 35, Issue 75, pp. 1-9.
322. L.S. Crump. Proceedings of the 51st Annual Conference of the SPI Composites Institute, Session 22, Society of the Plastic Industry, Washington, DC, 1996, pp. 1-34.
323. D.R. Bauer. Polymer Degradation and Stability, Vol. 69, Ingenta Connect Publications-Bath, Oxford, Providence, Cambridge, 2000, pp. 307-316.
324. D.S. Bajwa and D. Bruce. Improvements in weathering characteristics of wood-plastic composites. In: 8th International Conference on Woodfiber Composites, Forest Products Society, Madison, WI, May 23-25, 2005.
325. J. Fabiyi, A. McDonald, M. Wolcott, and K. Englund. Chemical changes that occur during the weathering of wood plastic composites. In: 8th International Conference on Woodfiber Composites, Forest Products Society, Madison, WI, May 23-25, 2005.
326. N.M. Stark. The effect of weathering variables on the lightness of HDPE/WF composites. In: 8th International Conference on Woodfiber Composites, Forest Products Society, Madison, WI, Madison, May 23-25, 2005.
327. T. Steele and L. Davis. UV stabilization in wood fiber systems. In: Proceedings of Progress in Woodfibre-Plastic Composites, Candadian Natural Composites Council, University of Toronto, Toronto, Canada, May 23-24, 2002.
328. S. Goldstein. Stabilization of wood composite. In: Proceeding of Additives 2006, 15th International Conference, ECM, Plymouth, MI, Las Vegas, NV, January 30-February 1, 2006.
329. N.M. Stark. Factors influencing the weatherability of wood-polyethylene composites. In: Proceedings of The Global Outlook for Natural Fiber & Wood Composites 2003, Intertech, Portland, ME, New Orleans, LA, December 3-5, 2003.
330. A. Einstein. Ann. Phys. 1906, 19, 289-306.
331. A.V. Shenoy. Rheology of Filled Polymer Systems, Kluwer Academic Publishers, 1999, p. 339.
332. R.B. Bird, R.C. Armstrong, and O. Hassager. Dynamics of Polymeric Liquids, Vol. 1. 2nd edition, John Wiley & Sons, Inc., New York, 1987, p. 171.
333. V. Hristov, E. Takacs, and J. Vlachopoulos. Viscoelastic behavior of highly filled HDPE/wood flour composites. ANTEC, Boston, May 1-5, 2005.
334. M. Mooney. Explicit formulas for slip and fluidity. J. Rheol. 1931, 2, 210-222.
335. S. Hatzikiriakos, and J.M. Dealy. Wall slip of molten high density polyethylenes. II. Capillary rheometer studies. J. Rheol. 1992, 36, 703-741.
336. R.J. Castillo, D. Strutt, and J. Vlachopoulos. Proceedings of Experiments and Simulations with Barrier Screws, ANTEC, Society of Plastic Engineers, Brookfield, CT, San Francisco, CA, 2002, pp. 318-322.
337. J. Vlachopoulos, SPE Extrusion Division, Society of Plastic Engineers, Brookfield, CT, Newsletter 1999, 23, 3.
338. C. Macosko. Rheology: Principles, Measurements, and Applications, Wiley-VCH Publication, New York, 1994, p. 181.
339. R.K. Gupta. Polymer and Composite Rheology, 2nd edition, Marcel Dekker, New York, 2000.
340. S.J. Park and R.G. Larson. Modeling the linear viscoelastic properties of metallocenecatalyzed high density polyethylenes with long-chain branching. J. Rheol. 2005, 49, 523-536.
341. A.I. Isayev (Ed.), Injection and Compression Molding Fundamentals Marcel Dekker, New York, 1987, p. 9, 87.
342. R.K. Gupta. Polymer and Composite Rheology, 2nd edition, Marcel Dekker, New York, 2000, p. 38.
343. C. Rauwendaal, Polymer Extrusion, 3rd edition, Hanser Publishers, Munich, 1994.
344. C.A. Hieber. Melt-viscosity characterization and its application to injection molding. In: A.I. Isayev (Ed.), Injection and Compression Molding Fundamentals, Marcel Dekker, New York, 1987, p. 6.
345. A.I. Isayev (Ed.), Injection and Compression Molding Fundamentals, Marcel Dekker, New York, 1987, p. 78.
346. A.V. Shenoy, Rheology of Filler Polymer Systems, Kluwer Academic Publishers, Norwel, MA, 1999, p. 492.
347. T.S. Creasy, S.G. Advani, and R.K. Okine, Transient rheological behavior of a long discontinuous fiber-melt system. J. Rheology, 1996, 40, 497-519.
348. T.S. Creasy and S.G. Advani, A model long-discontinuous-fiber filled thermoplastic melt in extensional flow. J. Non-Newtonian Fluid Mech. 1997, 73, 261-278.
349. T.S. Creasy and S.G. Advani, and R.K. Okine, Nonlinear response of long-discontinuousfiber/melt system in elongational flows. Rheol. Acta 1996, 35, 347-355.
350. Z. Charlton, D. Suwanda, and J. Vlachopoulos. Extrusion of heavily filled HDPE profiles. In: 17th Meeting of the Polymer Processing Society, PPS, Melville, NY, Montreal, May 21-24, 2001.
351. M. Botros, Intertech Conference, The Global Outlook for Natural and Wood Fiber Composites, New Orleans, LA, December 3-5, 2003.
352. M. Gahleitner. Melt rheology of polyolefins, Prog. Polym. Sci. 2001, 26, 895-944.
353. T.D. Papthanasiou and D.C. Guell (Eds.), Flow-Induced Alignment in Composite Materials, Woodhead Publishing, Cambridge, UK, 1997, p. 24.
354. P. Prentice. Rheology and its role in plastic processing. Rapra Review Reports, Report 84, Vol. 7, No. 12, 1995, p. 9.
355. W.P. Cox and E.H Merz, J. Polym. Sci. 1958, 28, 619.
356. V. Hristov, E. Takács, and J. Vlachopoulos. Surface tearing and wall slip phenomena in extrusion of highly filled HDPE/wood flour composites, Polym. Eng. Sci., 2006, 46, 1204-1214.
357. J. Dealy and K.F. Wissburn. Melt Rheology and its Role in Plastics Processing, Van Nostrand Reinhold, New York, 1990.
358. J. Vlachopoulos, V. Hristov, and Z. Charlton. Rheological aspects of wood polymer composites extrusion. In: Americas Regional Meeting Proceedings, PPS, Melville, NY, Quebec City, August 15-19, 2005.
359. V. Hristov, E. Takács, and J. Vlachopoulos, Surface tearing and wall slip phenomena in extrusion of highly filled HDPE/wood flour composites, Polym. Eng. Sci., 2006, 46, 1204-1214.
360. A.I. Isayev and R.K. Upadhyay, Flow of polymeric melts in juncture regions of injection molding. In: A.I. Isayev (Ed.), Injection and Compression Molding Fundamentals, Marcel Dekker, New York, 1987, pp. 167-169.
361. F. Mijangos-Santiago and J.M. Dealy. Effect of filler content and additives on the extrudate swell of polyethylene pipe resin. Polym. Eng. Sci. 1991, 31(16), 1176-1181.
362. V. Hristov, and J. Vlachoupoulos. Viscoelasticity and extrudate surface tearing of natural fiber composites. Rheol. Acta, in press.
363. M.W. Chastagner, M.P. Wolcott and K.R. Englund. Characterizing the Rheological Properties of Wood-Plastic Composite Formulations. Wood Materials and Engineering Laboratory, Washington State University, 2005.
364. V. Hristov, M. Krumova, and G. Michler. Influence of the excess coupling agent on the microdeformation processes and mechanical properties of polypropylene/wood flour composites. Macromol. Mater. Eng., 2006, 291, 677-683.
365. A.K. Bledzki, O. Faruk, M. Huque. Polym.-Plast. Technol. Eng. 2002, 41, 435.
366. R. Karnani., M. Krishnan, and R. Marayan. Polym. Eng. Sci. 1997, 37, 476.
367. H. Nitz, P. Reichert, H. Römling, and R. Mülhaupt. Macromol. Mater. Eng. 2000, 276/277, 51.
368. S. Kharchenko, K.B. Migler, and S. Hatzikiriakos. Conventional polymer processing additives. In: S.G. Hatzikiriakos and K.B. Migler (Eds.), Polymer Processing Instabilities-Control and Understanding, Dekker, New York, 2005.
369. L.M. Sherman. Plastics Technology, July 2005, p. 58.
370. V. Hristov, E. Takács, and J. Vlachopoulos. Extrudate surface tearing in extrusion of wood plastic composites, In: ANTEC 2006, Charlotte, NC, May 7-11, 2006.
371. R.K. Krishnaswamy, D.C. Rohlfing, A.M. Sukhadia, and K.R. Slusarz. Extrusion of broad-molecular-weight-distribution polyethylenes, Polymer. Eng. Sci. 2004, 44(12).
372. V. Hristov and J. Vlachopoulos. Viscoelasticity and extrudate surface tearing of natural fiber composites. Rheolog. Acta, in press.
373. V. Hristov. Polym. Eng. Sci. in press.
374. Z. Tao and J.-C. Huang, Study on the melt fracture of metallocene poly(ethylene-octene) in capillary flow. J. Appl. Polym. Sci. 2005, 98, 903-911.
375. J.P. Tordella. In: F.R. Eirich (Ed.), Rheology, Vol. 5, Academic Press, New York, 1969, Chapter 2.
376. F.N. Cogswell. Stretching flow instabilities at the exits of extrusion dies. J. Non-Newtonian Fluid Mech. 1977, 2, 37-47.
377. A.V. Ramamurthy. Wall slip in viscous fluids and influence of materials of construction. J. Rheol., 1986, 30, 337-357.
378. K.B. Migler. Sharkskin instability in extrusion. In: S.G. Hatzikiriakos and K.B. Migler (Eds.), Polymer Processing Instabilities-Control and Understanding, Dekker, New York, 2005.
379. K.B. Migler, Y. Son, F. Qiao, and K. Flynn. Extensional deformation, cohesive failure, and boundary conditions during sharkskin melt fraction. J. Rheol., 2002, 46, 383-400.
380. A.V. Ramamurthy. Extrudate irregularities and the polymer-metal interface connection, In: Proceedings of 10th International Congress on Rheology, Australian Society of Rheology, Sidney, 1988, pp. 85-87.
381. G.V. Vinogradov and L.I. Ivanova. Wall slippage and. elastic turbulence of polymer in the rubbery state. Rheol. Acta, 1968, 7(3), 243-255.
382. M.M. Denn. Extrusion instabilities and wall slip. Ann. Rev. Fluid Mech., 2001, 33, 265-287.