New findings on properties of plasma electrolytic oxidation Coatings from study of an Al-Cu-Li alloy

Electrochimica Acta

Volumn 107, Issue , 2013, Pages 358-378

  Cheng, Ying Liang ^a   Xue, Zhi Gang ^a   Wang, Qun ^a   Wu, Xiang Quan ^a   Matykina, E ^b   Skeldon, P ^c   Thompson, G E ^c  

^a HUNAN UNIVERSITY   (China)

^b UNIVERSIDAD COMPLUTENSE DE MADRID   (Spain)

^c UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Al Cu Li alloy; Cuprite; Discharge types; Dry sliding wear; Plasma electrolytic oxidation

Indexed keywords

ALUMINUM; COATINGS; COPPER ALLOYS; CORROSION RESISTANCE; ELECTRIC DISCHARGES; ELECTROLYSIS; ELECTROLYTES; LITHIUM; LITHIUM ALLOYS; OXIDATION; SILICATE MINERALS; SILICATES; SILICON COMPOUNDS; WEAR RESISTANCE;

AL-CU-LI ALLOY; CUPRITE; DISCHARGE TYPES; DRY SLIDING WEAR; PLASMA ELECTROLYTIC OXIDATION;

ALUMINUM COATINGS;

EID: 84880181493     PISSN: 00134686     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.electacta.2013.06.022     Document Type: Article

References (67)

1. A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews, S. J. Dowey, Plasma electrolysis for surface engineering, Surf. Coat. Technol. 122 (1999) 73.
2. J. A. Curran, T. W. Clyne, Porosity in plasma electrolytic oxide coatings, Acta Mater. 54 (2006) 1985.
3. A. L. Yerokhin, Preface, Surf. Coat. Technol. 201 (2007) 8659.
4. A. A. Voevodin, A. L. Yerokhin, V. V. Lyubimov, M. S. Donley, J. S. Zabinski, Characterization of wear protective Al-Si-O coatings formed on Al-based alloys by micro-arc discharge treatment, Surf. Coat. Technol. 86-87 (1996) 516.
5. V. S. Rudnev, A. E. Lysenko, P. M. Nedozorov, T. P. Yarovaya, A. N. Minaev, Thermal behavior of an oxide layer on aluminum, Prot. Met. 43 (2007) 465.
6. I. V. Lukiyanchuk, V. S. Rudnev, V. G. Kuryavyi, D. L. Boguta, S. B. Bulanova, P. S. Gordienko, Surface morphology, composition and thermal behavior of tungstencontaining anodic spark coatings on aluminium alloy, Thin Solid Films 446 (2004) 54.
7. L. Rama Krishna, K. R. C. Somaraju, G. Sundararajan, The tribological performance of ultra-hard ceramic composite coatings obtained through microarc oxidation, Surf. Coat. Technol. 163-164 (2003) 484.
8. J. A. Curran, T. W. Clyne, The thermal conductivity of plasma electrolytic oxide coatings on aluminium and magnesium, Surf. Coat. Technol. 199 (2005) 177.
9. F. Monfort, A. Berkani, E. Matykina, P. Skeldon, G. E. Thompson, H. Habazaki, K. Shimizu, Development of anodic coatings on aluminium under sparking conditions in silicate electrolyte, Corros. Sci. 49 (2007) 672.
10. A. L. Yerokin, V. V. Lyubimov, R. V. Ashitkov, Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys, Ceram. Int. 24 (1998) 1.
11. W. Xue, Z. Deng, Y. Lai, R. Chen, Analysis of phase distribution for ceramic coatings formed by microarc oxidation on aluminum alloy, J. Am. Ceram. Soc. 81 (1998) 1365.
12. X. Nie, A. Leyland, H. W. Song, A. L. Yerokhin, S. J. Dowey, A. Matthews, Thickness effects on the mechanical properties of micro-arc discharge oxide coatings on aluminium alloys, Surf. Coat. Technol. 116-119 (1999) 1055.
13. W. Xue, Z. Deng, R. Chen, T. Zhang, Growth regularity of ceramic coatings formed by microarc oxidation on Al-Cu-Mg alloy, Thin Solid Films 372 (2000) 114.
14. J. Tian, Z. Luo, S. Qi, X. Sun, Structure and antiwear behavior of micro-arc oxidized coatings on aluminum alloy, Surf. Coat. Technol. 154 (2002) 1.
15. J. A. Curran, T. W. Clyne, Thermo-physical properties of plasma electrolytic oxide coatings on aluminium, Surf. Coat. Technol. 199 (2005) 168.
16. A. L. Yerokhin, L. O. Snizhko, N. L. Gurevina, A. Leyland, A. Pilkington, A. Matthews, Spatial characteristics of discharge phenomena in plasma electrolytic oxidation of aluminium alloy, Surf. Coat. Technol. 177-178 (2004) 779.
17. 3 coatings, Surf. Coat. Technol. 199 (2005) 158.
18. F. Mécuson, T. Czerwiec, T. Belmonte, L. Dujardin, A. Viola, G. Henrion, Diagnostics of an electrolytic microarc process for aluminium alloy oxidation, Surf. Coat. Technol. 200 (2005) 804.
19. F. Jaspard-Mécuson, T. Czerwiec, G. Henrion, T. Belmonte, L. Dujardin, A. Viola, J. Beauvir, Tailored aluminium oxide layers by bipolar current adjustment in the Plasma Electrolytic Oxidation (PEO) process, Surf. Coat. Technol. 201 (2007) 8677.
20. Y. Guan, Y. Xia, G. Li, Growth mechanism and corrosion behavior of ceramic coatings on aluminum produced by autocontrol AC pulse PEO, Surf. Coat. Technol. 202 (2008) 4602.
21. K. Tillous, T. Toll-Duchanoy, E. Bauer-Grosse, L. Hericher, G. Geandier, Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214-T6 and 7050-T74, Surf. Coat. Technol. 203 (2009) 2969.
22. A. Melhem, G. Henrion, T. Czerwiec, J. L. Briancon, T. Duchanoy, F. Brochard, T. Belmonte, Changes induced by process parameters in oxide layers grown by the PEO process on Al alloys, Surf. Coat. Technol. 205 (2011) S133.
23. K. Du, X. Guo, Q. Guo, F. Wang, Y. Tian, A monolayer PEO coating on 2024 Al alloy by transient self-feedback control mode, Mater. Lett. 91 (2013) 45.
24. Y. Cheng, E. Matykina, R. Arrabal, P. Skeldon, G. E. Thompson, Plasma electrolytic oxidation and corrosion protection of Zircaloy-4, Surf. Coat. Technol. 206 (2012) 3230.
25. S. P. Sah, E. Tsuji, Y. Aoki, H. Habazaki, Cathodic pulse breakdown of anodic films on aluminium in alkaline silicate electrolyte-understanding the role of cathodic half-cycle in AC plasma electrolytic oxidation, Corros. Sci. 55 (2012) 90.
26. A. I. Slonova, O. P. Terleeva, Morphology, structure, and phase composition of microplasma coatings formed on Al-Cu-Mg alloy, Prot. Met. 44 (2008) 65.
27. R. Arrabal, E. Matykina, T. Hashimoto, P. Skeldon, G. E. Thompson, Characterization of AC PEO coatings on magnesium alloys, Surf. Coat. Technol. 203 (2009) 2207.
28. E. Matykina, R. Arrabal, A. Mohamed, P. Skeldon, G. E. Thompson, Plasma electrolytic oxidation of pre-anodized aluminium, Corros. Sci. 51 (2009) 2897.
29. E. Matykina, R. Arrabal, D. J. Scurr, A. Baron, P. Skeldon, G. E. Thompson, Investigation of the mechanism of plasma electrolytic oxidation of aluminium using O-18 tracer, Corros. Sci. 52 (2010) 1070.
30. E. Matykina, R. Arrabal, P. Skeldon, G. E. Thompson, Optimisation of the plasma electrolytic oxidation process efficiency on aluminium, Surf. Interface Anal. 42 (2010) 221.
31. E. Matykina, R. Arrabal, P. Skeldon, G. E. Thompson, Investigation of the growth processes of coatings formed by AC plasma electrolytic oxidation of aluminium, Electrochim. Acta 54 (2009) 6767.
32. H. Kalkanci, S. C. Kurnaz, The effect of process parameters on mullite-based plasma electrolytic oxide coatings, Surf. Coat. Technol. 203 (2008) 15.
33. C. Ma, Y. Lu, P. Sun, Y. Yuan, X. Jing, M. Zhang, Characterization of plasma electrolytic oxidation coatings formed on Mg-Li alloy in an alkaline polyphosphate electrolyte, Surf. Coat. Technol. 206 (2011) 287.
34. J. Li, H. Cai, B. Jiang, Growth mechanism of black ceramic layers formed by microarc oxidation, Surf. Coat. Technol. 201 (2007) 8702.
35. M. Tang, W. Li, H. Liu, L. Zhu, Influence of K2TiF6 in electrolyte on characteristics of the microarc oxidation coating on aluminum alloy, Curr. Appl. Phys. 12 (2012) 1259.
36. A. L. Yerokhin, L. O. Snizhko, N. L. Gurevina, A. Leyland, A. Pilkington, A. Matthews, Discharge characterization in plasma electrolytic oxidation of aluminium, J. Phys. D: Appl. Phys. 36 (2003) 2110.
37. A. L. Yerokhin, A. Shatrov, V. Samsonov, P. Shashkov, A. Pilkington, A. Leyland, A. Matthews, Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process, Surf. Coat. Technol. 199 (2005) 150.
38. M. A. Islam, A. S. M. A. Haseeb, A comparative wear study on heat-treated aluminium-lithium alloy and pure aluminium, Mater. Sci. Eng. A 268 (1999) 104.
39. P. M. G. P. Moreira, A. M. P. de Jesus, M. A. V. de Figueiredo, M. Windisch, G. Sinnema, P. M. S. T. de Castro, Fatigue and fracture behaviourof friction stirwelded aluminium-lithium 2195, Theor. Appl. Fract. Mec. 60 (2012) 1.
40. S. Kalyanam, A. J. Beaudoin, R. H. Dodds Jr., F. Barlat, Delamination cracking in advanced aluminum-lithium alloys-experimental and computational studies, Eng. Fract. Mec. 76 (2009) 2174.
41. Y. Liu, Z. Zhao, G. Yan, J. Hou, Properties research of ceramic coating on Al-Cu-Li Alloy by micro-arc oxidation, Electroplat. Pollut. Control 27 (2007) 25 (in Chinese).
42. Y. Cheng, F. Wu, J. Dong, X. Wu, Z. Xue, E. Matykina, P. Skeldon, G. E. Thompson, Comparison of plasma electrolytic oxidation of zirconium alloy in silicate-and aluminate-based electrolytes and wear properties of the resulting coatings, Electrochim. Acta 85 (2012) 25.
43. Y. Cheng, X. Wu, Z. Xue, E. Matykina, P. Skeldon, G. E. Thompson, Microstructure, corrosion and wear performance of plasma electrolytic oxidation coatings formed on Ti-6Al-4V alloy in silicate-hexametaphosphate electrolyte, Surf. Coat. Technol. 217 (2013) 129.
44. X. L. Zhang, Z. P. Yao, Z. H. Jiang, Y. F. Zhang, X. W. Liu, Investigation of the plasma electrolytic oxidation of Ti6Al4V under single-pulse power supply, Corros. Sci. 53 (2011) 2253.
45. C. D. Wagner, W. M. Riggs, L. E. Davis, J. F. Moulder, G. E. Muilonberg, Handbook of X-Ray Photoelectron Spectroscopy, Perkin-Elmer Corporation, 1979.
46. 6-NaOH, J. Mater. Process. Tech. 182 (2007) 28.
47. V. Hayez, A. Franquet, A. Hubin, H. Terryn, XPS study of the atmospheric corrosion of copper alloys of archaeological interest, Surf. Interface Anal. 36 (2004) 876.
48. G. Sundararajan, L. Rama Krishna, Mechanisms underlying the formation of thcik alumina coatings through the MAO coating technology, Surf. Coat. Technol. 167 (2003) 269.
49. E. V. Parfenov, A. L. Yerokhin, A. Matthews, Impedance spectroscopy characterization of PEO process and coatings on aluminium, Thin Solid Films 516 (2007) 428.
50. R. O. Hussein, X. Nie, D. O. Northwood, Influence of process parameters on electrolytic plasma discharging behavior and aluminum oxide coating microstructure, Surf. Coat. Technol. 205 (2010) 1659.
51. R. O. Hussein, X. Nie, D. O. Northwood, A. Yerokhin, A. Matthews, Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process, J. Phys. D: Appl. Phys. 43 (2010) 105203.
52. Y. Cheng, E. Matykina, P. Skeldon, G. Thompson, Characterization of plasma electrolytic oxidation coatings on Zircaloy-4 formed in different electrolytes with AC current regime, Electrochim. Acta 56 (2011) 8467.
53. Y. Cheng, F. Wu, E. Matykina, P. Skeldon, G. E. Thompson, The influences of microdischarge types and silicate onthe morphologies and phase compositions of plasma electrolytic oxidation coatings on Zircaloy-2, Corros. Sci. 59 (2012) 307.
54. P. Huang, F. Wang, K. Xu, Y. Han, Mechanical properties of titania prepared by plasma electrolytic oxidation at different voltages, Surf. Coat. Technol. 201 (2007) 5168.
55. E. Matykina, A. Berkani, P. Skeldon, G. E. Thompson, Real-time imaging of coating growth during plasma electrolytic oxidation of titanium, Electrochim. Acta 53 (2007) 1987.
56. M. Shokouhfar, C. Dehghanian, M. Montazeri, A. Baradaran, Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance: Part II, Appl. Surf. Sci. 258 (2012) 2416.
57. C. S. Wu, Z. Zhang, F. H. Cao, L. J. Zhang, J. Q. Zhang, C. N. Cao, Study on the anodizing of AZ31 magnesium alloys in alkaline borate solutions, Appl. Surf. Sci. 253 (2007) 3893.
58. H. Wu, Y. Cheng, L. Li, Z. Chen, H. Wang, Z. Zhang, The anodization of ZK60 magnesium alloy in alkaline solution containing silicate and the corrosion properties of the anodized films, Appl. Surf. Sci. 253 (2007) 9387.
59. R. O. Hussein, X. Nie, D. O. Northwood, A spectroscopic and microstructural study of oxide coatings produced on a Ti-6Al-4V alloy by plasma electrolytic oxidation, Mater. Chem. Phys. 134 (2012) 484.
60. C. Martini, L. Ceschini, F. Tarterini, J. M. Paillard, J. A. Curran, PEO layers obtained from mixed aluminate-phosphate baths on Ti-6Al-4V: Dry sliding behaviour and influence of a PTFE topcoat, Wear 269 (2010) 747.
61. L. O. Snizhko, A. L. Yerokhin, A. Pilkington, N. L. Gurevina, D. O. Misnyankin, A. Leyland, A. Matthews, Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions, Electrochim. Acta 49 (2004) 2085.
62. V. Dehnavi, B. L. Luan, D. W. Shoesmith, X. Y. Liu, S. Rohani, Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior, Surf. Coat. Technol. 226 (2013) 100.
63. H. Habazaki, X. Zhou, K. Shimizu, P. Skeldon, G. E. Thompson, G. C. Wood, Mobility of copper ions in anodic alumina films, Electrochim. Acta 42 (1997) 2627.
64. 3 coatings fabricated using plasma electrolysis, Surf. Coat. Technol. 149 (2002) 245.
65. Z. Xue, Y. Cheng, X. Wu, Y. Wu, J. Li, The preparation of plasma electrolytic oxidation coatings on 2A97 aluminium-lithium alloy and corrosion resistance of the coatings, Chinese journal of nonferrous metals 23 (7) (2013), in press (in Chinese).
66. R. O. Hussein, D. O. Northwood, J. F. Su, X. Nie, A study of the interactive effects of hybrid current modes on the tribological properties of a PEO (plasma electrolytic oxidation) coated AM60B Mg-alloy, Surf. Coat. Technol. 215 (2013) 421.
67. R. H. U. Khan, A. Yerokhin, X. Li, H. Dong, A. Matthews, Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: effect of current density and electrolyte concentration, Surf. Coat. Technol. 205 (2010) 1679.